TMLM Series - tracopower.com - Farnell Element 14 - Revenir à l'accueil
![[TXT]](http://www.audentia-gestion.fr/icons/text.gif){kind=icon}
Farnell-HIP4081A-Int..> 07-Jul-2014 19:47 1.0M
Farnell-ISL6251-ISL6..> 07-Jul-2014 19:47 1.1M
Farnell-DG411-DG412-..> 07-Jul-2014 19:47 1.0M
Farnell-3367-ARALDIT..> 07-Jul-2014 19:46 1.2M
Farnell-ICM7228-Inte..> 07-Jul-2014 19:46 1.1M
Farnell-Data-Sheet-K..> 07-Jul-2014 19:46 1.2M
Farnell-Silica-Gel-M..> 07-Jul-2014 19:46 1.2M
Farnell-TKC2-Dusters..> 07-Jul-2014 19:46 1.2M
Farnell-CRC-HANDCLEA..> 07-Jul-2014 19:46 1.2M
Farnell-760G-French-..> 07-Jul-2014 19:45 1.2M
Farnell-Decapant-KF-..> 07-Jul-2014 19:45 1.2M
Farnell-1734-ARALDIT..> 07-Jul-2014 19:45 1.2M
Farnell-Araldite-Fus..> 07-Jul-2014 19:45 1.2M
Farnell-fiche-de-don..> 07-Jul-2014 19:44 1.4M
Farnell-safety-data-..> 07-Jul-2014 19:44 1.4M
Farnell-A-4-Hardener..> 07-Jul-2014 19:44 1.4M
Farnell-CC-Debugger-..> 07-Jul-2014 19:44 1.5M
Farnell-MSP430-Hardw..> 07-Jul-2014 19:43 1.8M
Farnell-SmartRF06-Ev..> 07-Jul-2014 19:43 1.6M
Farnell-CC2531-USB-H..> 07-Jul-2014 19:43 1.8M
Farnell-Alimentation..> 07-Jul-2014 19:43 1.8M
Farnell-BK889B-PONT-..> 07-Jul-2014 19:42 1.8M
Farnell-User-Guide-M..> 07-Jul-2014 19:41 2.0M
Farnell-T672-3000-Se..> 07-Jul-2014 19:41 2.0M
Farnell-T672-3000-Se..> 08-Jul-2014 18:59 2.0M
Farnell-tesa®pack63..> 08-Jul-2014 18:56 2.0M
Farnell-Encodeur-USB..> 08-Jul-2014 18:56 2.0M
Farnell-CC2530ZDK-Us..> 08-Jul-2014 18:55 2.1M
Farnell-2020-Manuel-..> 08-Jul-2014 18:55 2.1M
Farnell-Synchronous-..> 08-Jul-2014 18:54 2.1M
Farnell-Arithmetic-L..> 08-Jul-2014 18:54 2.1M
Farnell-NA555-NE555-..> 08-Jul-2014 18:53 2.2M
Farnell-4-Bit-Magnit..> 08-Jul-2014 18:53 2.2M
Farnell-LM555-Timer-..> 08-Jul-2014 18:53 2.2M
Farnell-L293d-Texas-..> 08-Jul-2014 18:53 2.2M
Farnell-SN54HC244-SN..> 08-Jul-2014 18:52 2.3M
Farnell-MAX232-MAX23..> 08-Jul-2014 18:52 2.3M
Farnell-High-precisi..> 08-Jul-2014 18:51 2.3M
Farnell-SMU-Instrume..> 08-Jul-2014 18:51 2.3M
Farnell-900-Series-B..> 08-Jul-2014 18:50 2.3M
Farnell-BA-Series-Oh..> 08-Jul-2014 18:50 2.3M
Farnell-UTS-Series-S..> 08-Jul-2014 18:49 2.5M
Farnell-270-Series-O..> 08-Jul-2014 18:49 2.3M
Farnell-UTS-Series-S..> 08-Jul-2014 18:49 2.8M
Farnell-Tiva-C-Serie..> 08-Jul-2014 18:49 2.6M
Farnell-UTO-Souriau-..> 08-Jul-2014 18:48 2.8M
Farnell-Clipper-Seri..> 08-Jul-2014 18:48 2.8M
Farnell-SOURIAU-Cont..> 08-Jul-2014 18:47 3.0M
Farnell-851-Series-P..> 08-Jul-2014 18:47 3.0M
Farnell-SL59830-Inte..> 06-Jul-2014 10:07 1.0M
Farnell-ALF1210-PDF.htm 06-Jul-2014 10:06 4.0M
Farnell-AD7171-16-Bi..> 06-Jul-2014 10:06 1.0M
Farnell-Low-Noise-24..> 06-Jul-2014 10:05 1.0M
Farnell-ESCON-Featur..> 06-Jul-2014 10:05 938K
Farnell-74LCX573-Fai..> 06-Jul-2014 10:05 1.9M
Farnell-1N4148WS-Fai..> 06-Jul-2014 10:04 1.9M
Farnell-FAN6756-Fair..> 06-Jul-2014 10:04 850K
Farnell-Datasheet-Fa..> 06-Jul-2014 10:04 861K
Farnell-ES1F-ES1J-fi..> 06-Jul-2014 10:04 867K
Farnell-QRE1113-Fair..> 06-Jul-2014 10:03 879K
Farnell-2N7002DW-Fai..> 06-Jul-2014 10:03 886K
Farnell-FDC2512-Fair..> 06-Jul-2014 10:03 886K
Farnell-FDV301N-Digi..> 06-Jul-2014 10:03 886K
Farnell-S1A-Fairchil..> 06-Jul-2014 10:03 896K
Farnell-BAV99-Fairch..> 06-Jul-2014 10:03 896K
Farnell-74AC00-74ACT..> 06-Jul-2014 10:03 911K
Farnell-NaPiOn-Panas..> 06-Jul-2014 10:02 911K
Farnell-LQ-RELAYS-AL..> 06-Jul-2014 10:02 924K
Farnell-ev-relays-ae..> 06-Jul-2014 10:02 926K
Farnell-ESCON-Featur..> 06-Jul-2014 10:02 931K
Farnell-Amplifier-In..> 06-Jul-2014 10:02 940K
Farnell-Serial-File-..> 06-Jul-2014 10:02 941K
Farnell-Both-the-Del..> 06-Jul-2014 10:01 948K
Farnell-Videk-PDF.htm 06-Jul-2014 10:01 948K
Farnell-EPCOS-173438..> 04-Jul-2014 10:43 3.3M
Farnell-Sensorless-C..> 04-Jul-2014 10:42 3.3M
Farnell-197.31-KB-Te..> 04-Jul-2014 10:42 3.3M
Farnell-PIC12F609-61..> 04-Jul-2014 10:41 3.7M
Farnell-PADO-semi-au..> 04-Jul-2014 10:41 3.7M
Farnell-03-iec-runds..> 04-Jul-2014 10:40 3.7M
Farnell-ACC-Silicone..> 04-Jul-2014 10:40 3.7M
Farnell-Series-TDS10..> 04-Jul-2014 10:39 4.0M
Farnell-03-iec-runds..> 04-Jul-2014 10:40 3.7M
Farnell-0430300011-D..> 14-Jun-2014 18:13 2.0M
Farnell-06-6544-8-PD..> 26-Mar-2014 17:56 2.7M
Farnell-3M-Polyimide..> 21-Mar-2014 08:09 3.9M
Farnell-3M-VolitionT..> 25-Mar-2014 08:18 3.3M
Farnell-10BQ060-PDF.htm 14-Jun-2014 09:50 2.4M
Farnell-10TPB47M-End..> 14-Jun-2014 18:16 3.4M
Farnell-12mm-Size-In..> 14-Jun-2014 09:50 2.4M
Farnell-24AA024-24LC..> 23-Jun-2014 10:26 3.1M
Farnell-50A-High-Pow..> 20-Mar-2014 17:31 2.9M
Farnell-197.31-KB-Te..> 04-Jul-2014 10:42 3.3M
Farnell-1907-2006-PD..> 26-Mar-2014 17:56 2.7M
Farnell-5910-PDF.htm 25-Mar-2014 08:15 3.0M
Farnell-6517b-Electr..> 29-Mar-2014 11:12 3.3M
Farnell-A-True-Syste..> 29-Mar-2014 11:13 3.3M
Farnell-ACC-Silicone..> 04-Jul-2014 10:40 3.7M
Farnell-AD524-PDF.htm 20-Mar-2014 17:33 2.8M
Farnell-ADL6507-PDF.htm 14-Jun-2014 18:19 3.4M
Farnell-ADSP-21362-A..> 20-Mar-2014 17:34 2.8M
Farnell-ALF1210-PDF.htm 04-Jul-2014 10:39 4.0M
Farnell-ALF1225-12-V..> 01-Apr-2014 07:40 3.4M
Farnell-ALF2412-24-V..> 01-Apr-2014 07:39 3.4M
Farnell-AN10361-Phil..> 23-Jun-2014 10:29 2.1M
Farnell-ARADUR-HY-13..> 26-Mar-2014 17:55 2.8M
Farnell-ARALDITE-201..> 21-Mar-2014 08:12 3.7M
Farnell-ARALDITE-CW-..> 26-Mar-2014 17:56 2.7M
Farnell-ATMEL-8-bit-..> 19-Mar-2014 18:04 2.1M
Farnell-ATMEL-8-bit-..> 11-Mar-2014 07:55 2.1M
Farnell-ATmega640-VA..> 14-Jun-2014 09:49 2.5M
Farnell-ATtiny20-PDF..> 25-Mar-2014 08:19 3.6M
Farnell-ATtiny26-L-A..> 13-Jun-2014 18:40 1.8M
Farnell-Alimentation..> 14-Jun-2014 18:24 2.5M
Farnell-Alimentation..> 01-Apr-2014 07:42 3.4M
Farnell-Amplificateu..> 29-Mar-2014 11:11 3.3M
Farnell-An-Improved-..> 14-Jun-2014 09:49 2.5M
Farnell-Atmel-ATmega..> 19-Mar-2014 18:03 2.2M
Farnell-Avvertenze-e..> 14-Jun-2014 18:20 3.3M
Farnell-BC846DS-NXP-..> 13-Jun-2014 18:42 1.6M
Farnell-BC847DS-NXP-..> 23-Jun-2014 10:24 3.3M
Farnell-BF545A-BF545..> 23-Jun-2014 10:28 2.1M
Farnell-BK2650A-BK26..> 29-Mar-2014 11:10 3.3M
Farnell-BT151-650R-N..> 13-Jun-2014 18:40 1.7M
Farnell-BTA204-800C-..> 13-Jun-2014 18:42 1.6M
Farnell-BUJD203AX-NX..> 13-Jun-2014 18:41 1.7M
Farnell-BYV29F-600-N..> 13-Jun-2014 18:42 1.6M
Farnell-BYV79E-serie..> 10-Mar-2014 16:19 1.6M
Farnell-BZX384-serie..> 23-Jun-2014 10:29 2.1M
Farnell-Battery-GBA-..> 14-Jun-2014 18:13 2.0M
Farnell-C.A-6150-C.A..> 14-Jun-2014 18:24 2.5M
Farnell-C.A 8332B-C...> 01-Apr-2014 07:40 3.4M
Farnell-CC2560-Bluet..> 29-Mar-2014 11:14 2.8M
Farnell-CD4536B-Type..> 14-Jun-2014 18:13 2.0M
Farnell-CIRRUS-LOGIC..> 10-Mar-2014 17:20 2.1M
Farnell-CS5532-34-BS..> 01-Apr-2014 07:39 3.5M
Farnell-Cannon-ZD-PD..> 11-Mar-2014 08:13 2.8M
Farnell-Ceramic-tran..> 14-Jun-2014 18:19 3.4M
Farnell-Circuit-Note..> 26-Mar-2014 18:00 2.8M
Farnell-Circuit-Note..> 26-Mar-2014 18:00 2.8M
Farnell-Cles-electro..> 21-Mar-2014 08:13 3.9M
Farnell-Conception-d..> 11-Mar-2014 07:49 2.4M
Farnell-Connectors-N..> 14-Jun-2014 18:12 2.1M
Farnell-Construction..> 14-Jun-2014 18:25 2.5M
Farnell-Controle-de-..> 11-Mar-2014 08:16 2.8M
Farnell-Cordless-dri..> 14-Jun-2014 18:13 2.0M
Farnell-Current-Tran..> 26-Mar-2014 17:58 2.7M
Farnell-Current-Tran..> 26-Mar-2014 17:58 2.7M
Farnell-Current-Tran..> 26-Mar-2014 17:59 2.7M
Farnell-Current-Tran..> 26-Mar-2014 17:59 2.7M
Farnell-DC-Fan-type-..> 14-Jun-2014 09:48 2.5M
Farnell-DC-Fan-type-..> 14-Jun-2014 09:51 1.8M
Farnell-Davum-TMC-PD..> 14-Jun-2014 18:27 2.4M
Farnell-De-la-puissa..> 29-Mar-2014 11:10 3.3M
Farnell-Directive-re..> 25-Mar-2014 08:16 3.0M
Farnell-Documentatio..> 14-Jun-2014 18:26 2.5M
Farnell-Download-dat..> 13-Jun-2014 18:40 1.8M
Farnell-ECO-Series-T..> 20-Mar-2014 08:14 2.5M
Farnell-ELMA-PDF.htm 29-Mar-2014 11:13 3.3M
Farnell-EMC1182-PDF.htm 25-Mar-2014 08:17 3.0M
Farnell-EPCOS-173438..> 04-Jul-2014 10:43 3.3M
Farnell-EPCOS-Sample..> 11-Mar-2014 07:53 2.2M
Farnell-ES2333-PDF.htm 11-Mar-2014 08:14 2.8M
Farnell-Ed.081002-DA..> 19-Mar-2014 18:02 2.5M
Farnell-F28069-Picco..> 14-Jun-2014 18:14 2.0M
Farnell-F42202-PDF.htm 19-Mar-2014 18:00 2.5M
Farnell-FDS-ITW-Spra..> 14-Jun-2014 18:22 3.3M
Farnell-FICHE-DE-DON..> 10-Mar-2014 16:17 1.6M
Farnell-Fastrack-Sup..> 23-Jun-2014 10:25 3.3M
Farnell-Ferric-Chlor..> 29-Mar-2014 11:14 2.8M
Farnell-Fiche-de-don..> 14-Jun-2014 09:47 2.5M
Farnell-Fiche-de-don..> 14-Jun-2014 18:26 2.5M
Farnell-Fluke-1730-E..> 14-Jun-2014 18:23 2.5M
Farnell-GALVA-A-FROI..> 26-Mar-2014 17:56 2.7M
Farnell-GALVA-MAT-Re..> 26-Mar-2014 17:57 2.7M
Farnell-GN-RELAYS-AG..> 20-Mar-2014 08:11 2.6M
Farnell-HC49-4H-Crys..> 14-Jun-2014 18:20 3.3M
Farnell-HFE1600-Data..> 14-Jun-2014 18:22 3.3M
Farnell-HI-70300-Sol..> 14-Jun-2014 18:27 2.4M
Farnell-HUNTSMAN-Adv..> 10-Mar-2014 16:17 1.7M
Farnell-Haute-vitess..> 11-Mar-2014 08:17 2.4M
Farnell-IP4252CZ16-8..> 13-Jun-2014 18:41 1.7M
Farnell-Instructions..> 19-Mar-2014 18:01 2.5M
Farnell-KSZ8851SNL-S..> 23-Jun-2014 10:28 2.1M
Farnell-L-efficacite..> 11-Mar-2014 07:52 2.3M
Farnell-LCW-CQ7P.CC-..> 25-Mar-2014 08:19 3.2M
Farnell-LME49725-Pow..> 14-Jun-2014 09:49 2.5M
Farnell-LOCTITE-542-..> 25-Mar-2014 08:15 3.0M
Farnell-LOCTITE-3463..> 25-Mar-2014 08:19 3.0M
Farnell-LUXEON-Guide..> 11-Mar-2014 07:52 2.3M
Farnell-Leaded-Trans..> 23-Jun-2014 10:26 3.2M
Farnell-Les-derniers..> 11-Mar-2014 07:50 2.3M
Farnell-Loctite3455-..> 25-Mar-2014 08:16 3.0M
Farnell-Low-cost-Enc..> 13-Jun-2014 18:42 1.7M
Farnell-Lubrifiant-a..> 26-Mar-2014 18:00 2.7M
Farnell-MC3510-PDF.htm 25-Mar-2014 08:17 3.0M
Farnell-MC21605-PDF.htm 11-Mar-2014 08:14 2.8M
Farnell-MCF532x-7x-E..> 29-Mar-2014 11:14 2.8M
Farnell-MICREL-KSZ88..> 11-Mar-2014 07:54 2.2M
Farnell-MICROCHIP-PI..> 19-Mar-2014 18:02 2.5M
Farnell-MOLEX-39-00-..> 10-Mar-2014 17:19 1.9M
Farnell-MOLEX-43020-..> 10-Mar-2014 17:21 1.9M
Farnell-MOLEX-43160-..> 10-Mar-2014 17:21 1.9M
Farnell-MOLEX-87439-..> 10-Mar-2014 17:21 1.9M
Farnell-MPXV7002-Rev..> 20-Mar-2014 17:33 2.8M
Farnell-MX670-MX675-..> 14-Jun-2014 09:46 2.5M
Farnell-Microchip-MC..> 13-Jun-2014 18:27 1.8M
Farnell-Microship-PI..> 11-Mar-2014 07:53 2.2M
Farnell-Midas-Active..> 14-Jun-2014 18:17 3.4M
Farnell-Midas-MCCOG4..> 14-Jun-2014 18:11 2.1M
Farnell-Miniature-Ci..> 26-Mar-2014 17:55 2.8M
Farnell-Mistral-PDF.htm 14-Jun-2014 18:12 2.1M
Farnell-Molex-83421-..> 14-Jun-2014 18:17 3.4M
Farnell-Molex-COMMER..> 14-Jun-2014 18:16 3.4M
Farnell-Molex-Crimp-..> 10-Mar-2014 16:27 1.7M
Farnell-Multi-Functi..> 20-Mar-2014 17:38 3.0M
Farnell-NTE_SEMICOND..> 11-Mar-2014 07:52 2.3M
Farnell-NXP-74VHC126..> 10-Mar-2014 16:17 1.6M
Farnell-NXP-BT136-60..> 11-Mar-2014 07:52 2.3M
Farnell-NXP-PBSS9110..> 10-Mar-2014 17:21 1.9M
Farnell-NXP-PCA9555 ..> 11-Mar-2014 07:54 2.2M
Farnell-NXP-PMBFJ620..> 10-Mar-2014 16:16 1.7M
Farnell-NXP-PSMN1R7-..> 10-Mar-2014 16:17 1.6M
Farnell-NXP-PSMN7R0-..> 10-Mar-2014 17:19 2.1M
Farnell-NXP-TEA1703T..> 11-Mar-2014 08:15 2.8M
Farnell-Nilï¬-sk-E-..> 14-Jun-2014 09:47 2.5M
Farnell-Novembre-201..> 20-Mar-2014 17:38 3.3M
Farnell-OMRON-Master..> 10-Mar-2014 16:26 1.8M
Farnell-OSLON-SSL-Ce..> 19-Mar-2014 18:03 2.1M
Farnell-OXPCIE958-FB..> 13-Jun-2014 18:40 1.8M
Farnell-PADO-semi-au..> 04-Jul-2014 10:41 3.7M
Farnell-PBSS5160T-60..> 19-Mar-2014 18:03 2.1M
Farnell-PDTA143X-ser..> 20-Mar-2014 08:12 2.6M
Farnell-PDTB123TT-NX..> 13-Jun-2014 18:43 1.5M
Farnell-PESD5V0F1BL-..> 13-Jun-2014 18:43 1.5M
Farnell-PESD9X5.0L-P..> 13-Jun-2014 18:43 1.6M
Farnell-PIC12F609-61..> 04-Jul-2014 10:41 3.7M
Farnell-PIC18F2455-2..> 23-Jun-2014 10:27 3.1M
Farnell-PIC24FJ256GB..> 14-Jun-2014 09:51 2.4M
Farnell-PMBT3906-PNP..> 13-Jun-2014 18:44 1.5M
Farnell-PMBT4403-PNP..> 23-Jun-2014 10:27 3.1M
Farnell-PMEG4002EL-N..> 14-Jun-2014 18:18 3.4M
Farnell-PMEG4010CEH-..> 13-Jun-2014 18:43 1.6M
Farnell-Panasonic-15..> 23-Jun-2014 10:29 2.1M
Farnell-Panasonic-EC..> 20-Mar-2014 17:36 2.6M
Farnell-Panasonic-EZ..> 20-Mar-2014 08:10 2.6M
Farnell-Panasonic-Id..> 20-Mar-2014 17:35 2.6M
Farnell-Panasonic-Ne..> 20-Mar-2014 17:36 2.6M
Farnell-Panasonic-Ra..> 20-Mar-2014 17:37 2.6M
Farnell-Panasonic-TS..> 20-Mar-2014 08:12 2.6M
Farnell-Panasonic-Y3..> 20-Mar-2014 08:11 2.6M
Farnell-Pico-Spox-Wi..> 10-Mar-2014 16:16 1.7M
Farnell-Pompes-Charg..> 24-Apr-2014 20:23 3.3M
Farnell-Ponts-RLC-po..> 14-Jun-2014 18:23 3.3M
Farnell-Portable-Ana..> 29-Mar-2014 11:16 2.8M
Farnell-Premier-Farn..> 21-Mar-2014 08:11 3.8M
Farnell-Produit-3430..> 14-Jun-2014 09:48 2.5M
Farnell-Proskit-SS-3..> 10-Mar-2014 16:26 1.8M
Farnell-Puissance-ut..> 11-Mar-2014 07:49 2.4M
Farnell-Q48-PDF.htm 23-Jun-2014 10:29 2.1M
Farnell-Radial-Lead-..> 20-Mar-2014 08:12 2.6M
Farnell-Realiser-un-..> 11-Mar-2014 07:51 2.3M
Farnell-Reglement-RE..> 21-Mar-2014 08:08 3.9M
Farnell-Repartiteurs..> 14-Jun-2014 18:26 2.5M
Farnell-S-TRI-SWT860..> 21-Mar-2014 08:11 3.8M
Farnell-SB175-Connec..> 11-Mar-2014 08:14 2.8M
Farnell-SMBJ-Transil..> 29-Mar-2014 11:12 3.3M
Farnell-SOT-23-Multi..> 11-Mar-2014 07:51 2.3M
Farnell-SPLC780A1-16..> 14-Jun-2014 18:25 2.5M
Farnell-SSC7102-Micr..> 23-Jun-2014 10:25 3.2M
Farnell-SVPE-series-..> 14-Jun-2014 18:15 2.0M
Farnell-Sensorless-C..> 04-Jul-2014 10:42 3.3M
Farnell-Septembre-20..> 20-Mar-2014 17:46 3.7M
Farnell-Serie-PicoSc..> 19-Mar-2014 18:01 2.5M
Farnell-Serie-Standa..> 14-Jun-2014 18:23 3.3M
Farnell-Series-2600B..> 20-Mar-2014 17:30 3.0M
Farnell-Series-TDS10..> 04-Jul-2014 10:39 4.0M
Farnell-Signal-PCB-R..> 14-Jun-2014 18:11 2.1M
Farnell-Strangkuhlko..> 21-Mar-2014 08:09 3.9M
Farnell-Supercapacit..> 26-Mar-2014 17:57 2.7M
Farnell-TDK-Lambda-H..> 14-Jun-2014 18:21 3.3M
Farnell-TEKTRONIX-DP..> 10-Mar-2014 17:20 2.0M
Farnell-Tektronix-AC..> 13-Jun-2014 18:44 1.5M
Farnell-Telemetres-l..> 20-Mar-2014 17:46 3.7M
Farnell-Termometros-..> 14-Jun-2014 18:14 2.0M
Farnell-The-essentia..> 10-Mar-2014 16:27 1.7M
Farnell-U2270B-PDF.htm 14-Jun-2014 18:15 3.4M
Farnell-USB-Buccanee..> 14-Jun-2014 09:48 2.5M
Farnell-USB1T11A-PDF..> 19-Mar-2014 18:03 2.1M
Farnell-V4N-PDF.htm 14-Jun-2014 18:11 2.1M
Farnell-WetTantalum-..> 11-Mar-2014 08:14 2.8M
Farnell-XPS-AC-Octop..> 14-Jun-2014 18:11 2.1M
Farnell-XPS-MC16-XPS..> 11-Mar-2014 08:15 2.8M
Farnell-YAGEO-DATA-S..> 11-Mar-2014 08:13 2.8M
Farnell-ZigBee-ou-le..> 11-Mar-2014 07:50 2.4M
Farnell-celpac-SUL84..> 21-Mar-2014 08:11 3.8M
Farnell-china_rohs_o..> 21-Mar-2014 10:04 3.9M
Farnell-cree-Xlamp-X..> 20-Mar-2014 17:34 2.8M
Farnell-cree-Xlamp-X..> 20-Mar-2014 17:35 2.7M
Farnell-cree-Xlamp-X..> 20-Mar-2014 17:31 2.9M
Farnell-cree-Xlamp-m..> 20-Mar-2014 17:32 2.9M
Farnell-cree-Xlamp-m..> 20-Mar-2014 17:32 2.9M
Farnell-ir1150s_fr.p..> 29-Mar-2014 11:11 3.3M
Farnell-manual-bus-p..> 10-Mar-2014 16:29 1.9M
Farnell-propose-plus..> 11-Mar-2014 08:19 2.8M
Farnell-techfirst_se..> 21-Mar-2014 08:08 3.9M
Farnell-testo-205-20..> 20-Mar-2014 17:37 3.0M
Farnell-testo-470-Fo..> 20-Mar-2014 17:38 3.0M
Farnell-uC-OS-III-Br..> 10-Mar-2014 17:20 2.0M
Sefram-7866HD.pdf-PD..> 29-Mar-2014 11:46 472K
Sefram-CAT_ENREGISTR..> 29-Mar-2014 11:46 461K
Sefram-CAT_MESUREURS..> 29-Mar-2014 11:46 435K
Sefram-GUIDE_SIMPLIF..> 29-Mar-2014 11:46 481K
Sefram-GUIDE_SIMPLIF..> 29-Mar-2014 11:46 442K
Sefram-GUIDE_SIMPLIF..> 29-Mar-2014 11:46 422K
Sefram-SP270.pdf-PDF..> 29-Mar-2014 11:46 464Khttp://www.tracopower.com AC/DC Power Modules TMLM Series, 4 to 20 Watt The TMLM Series switching power supplies, offer highest power density in a fully encapsulated module which can be soldered directly on to PCBs. This feature makes these modules an ideal solution for all space critical applications in commercial and industrial electronic equipment. International safety approvals qualify the product for worldwide markets. SMD-technology and high efficiency guarantees a high reliability of these Power Supplies. Features ◆ AC/DC power modules for PCB mounting ◆ Highest power density ◆ Fully encapsulated plastic case ◆ Universal input 90–264 VAC, 47–440 Hz ◆ High efficiency ◆ EMI meets EN 55022, class B and FCC, level B ◆ Low ripple and noise ◆ Short circuit and overload protection ◆ 3-year product warranty Order Code Output Power max. Output 1 Output 2 Efficiency TMLM 04103 4.0 Watt 3.3 VDC / 1200 mA 68 % TMLM 04105 4.0 Watt 5.0 VDC / 800 mA 72 % TMLM 04109 4.0 Watt 9.0 VDC / 444 mA 75 % TMLM 04112 4.0 Watt 12 VDC / 333 mA 76 % TMLM 04115 4.0 Watt 15 VDC / 267 mA 76 % TMLM 04124 4.0 Watt 24 VDC / 167 mA 77 % TMLM 04253 3.5 Watt +5.0 VDC / 600 mA +3.3 VDC / 150 mA 72 % TMLM 04225 3.6 Watt +12 VDC / 250 mA +5.0 VDC / 120 mA 75 % TMLM 05103 4.1 Watt 3.3 VDC / 1250 mA 68 % TMLM 05105 5 Watt 5.0 VDC / 1000 mA 71 % TMLM 05112 5 Watt 12 VDC / 420 mA 75 % TMLM 05115 5 Watt 15 VDC / 333 mA 75 % TMLM 05124 5.5 Watt 24 VDC / 230 mA 77 % TMLM 10103 8.2 Watt 3.3 VDC / 2500 mA 74 % TMLM 10105 10 Watt 5.0 VDC / 2000 mA 79 % TMLM 10112 10 Watt 12 VDC / 833 mA 82 % TMLM 10115 10 Watt 15 VDC / 667 mA 78 % TMLM 10124 10 Watt 24 VDC / 417 mA 80 % TMLM 20103 12 Watt 3.3 VDC / 3600 mA 74 % TMLM 20105 18 Watt 5.0 VDC / 3600 mA 78 % TMLM 20112 20 Watt 12 VDC / 1660 mA 82 % TMLM 20115 20 Watt 15 VDC / 1330 mA 83 % TMLM 20124 20 Watt 24 VDC / 833 mA 83 % Models UL 60950-1 Page 1 of 4 http://www.tracopower.com AC/DC Power Modules TMLM Series 4 to 20 Watt Input Specifications Input voltage – Nominal 100 – 240 VAC – Range 90 – 264 VAC (universal input) – DC range 120 – 370 VDC Input frequency 47 – 440 Hz Input current at full load (115 VAC / 230 VAC) TMLM 04 models: 95 mA / 65 mA typ. TMLM 05 models: 110 mA / 70 mA typ. TMLM 10 models: 220 mA / 150 mA typ. TMLM 20 models: 385 mA / 250 mA typ. Inrush current (<2 ms) (115 VAC / 230 VAC) TMLM 04 models: 15 A max / 25 A max. TMLM 05 & TMLM 10 models: 10 A max / 20 A max. TMLM 20 models: 20 A max / 40 A max. External input fuse required (recommended value) 1.5 A slow blow type Output Specifications Voltage set accuracy ±2 % Regulation – Input variation 0.3 % max. (0.5% max. for TMLM 20 models, 3.0 % max for output 2) – Load variation TMLM 04; 3.3 VDC models: 1.0 % max. (0–100% load) TMLM 04 other models output 1: 0.5 % max. (0–100% load) TMLM 04 output 2: 5.0 % max. (25–100% load) TMLM 05 & TMLM 10 models: 0.5 % max. (5–100% load) TMLM 20 models: 1.0 % max. (5–100% load) Minimum load 0 % (25% for dual output models) operation at 0-load condition will not damage these power supplies, however, they may not meet all listed specifications Ripple and noise (20 MHz bandwidth) TMLM 04; 3.3 VDC models: <250 mV TMLM 04; 5.0 VDC models: <200 mV TMLM 04; other models: <100 mV TMLM 05 & TMLM 10; 3.3 & 5.0 VDC models: <130 mV TMLM 05 & TMLM 10; 12 & 15 VDC models: <210 mV TMLM 05 & TMLM 10; 24 VDC models: <280 mV TMLM 20; 3.3 & 5.0 VDC models: <200 mV TMLM 20; 12 VDC model: <240 mV TMLM 20; 15 VDC model: <300 mV TMLM 20; 24 VDC model: <480 mV Current limitation 120 – 180 % fold back Short circuit protection indefinite (automatic recovery) Overvoltage protection by Zehner diode (main output only) 120 % of Vout typ. Page 2 of 4 Max. capacitive load [μF] Model series Output: TMLM 04 TMLM 05 TMLM 10 TMLM 20 Single output models: 3.3 VDC 14‘000 13‘800 75‘000 4‘500 5.0 VDC 8‘000 6‘000 40‘000 3‘500 9.0 VDC 2‘400 - - - 12 VDC 1‘000 1‘400 8‘500 1‘800 15 VDC 700 1‘000 3‘500 1‘500 24 VDC 220 170 1‘200 1‘200 Dual output models: 5.0 VDC / 3.3 VDC 5‘600 / 4‘700 - - - 12 VDC / 5.0 VDC 330 / 4‘700 - - - http://www.tracopower.com Page 3 of 4 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. General Specifications Temperature ranges – Operating –25°C to +60°C – Storage (non operating) –40°C to +85°C Derating 3.75 %/K above +50°C TMLM 20 models: 2.5 %/K above +40°C Temperature coefficient 0.02 %/K Humidity (non condensing) 95 % rel max. Switching frequency approx. 100 kHz Hold-up time (115 VAC / 230 VAC) TMLM 20 models: 12 ms / 56 ms other models: 15 ms min. Isolation voltage (60 sec.) – Input/ Output 3‘000 VAC Leakage current TMLM 04 models: 0.25 mA max. TMLM 05 models: 0.75 mA max. TMLM 10 models: 0.25 mA max. TMLM 20 models: tba. Reliability /calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >330’000 h TMLM 20 models: >250’000 h Electromagnetic compatibility (EMC), emissions EN 55022, class B, FCC part 15, level B Electromagnetic compatibility (EMC), immunity EN 61000-6-2: 2005 Degree of protection class II to IEC/EN 60536 Safety standards UL 60950-1, IEC/EN 60950-1 Safety approvals – UL/cUL 60950-1 www.ul.com -> certifications -> File e188913 – CB test certificate IEC 60950-1 for 4W models: www.tracopower.com/products/tmlm04-cb.pdf – CB test certificate IEC 60950-1 for other models: www.tracopower.com/products/tmlm-cb.pdf Environment – Vibration acc. IEC 60068-2-6; 3 axes, sine sweep, 10-55 Hz, 1g, 1oct/min. – Shock acc. IEC 60068-2-27 20 G (3 directions each 3 times) Environmental compliance – Reach www.tracopower.com/products/tmlm-reach.pdf – RoHS RoHS directive 2011/65/EU Casing material Plastic resin with fiberglass (UL 94V-0 rated) TMLM 04 Models: 21.5 (0.85) 36.5 (1.44) 2 x 3.75 (2 x 0.15) 3.75 (0.15) 1 2 3 4 7 6 5 27.0 (1.06) 3.0 21.0 (0.83) (0.12) 17.1 (0.67) 4.0 (0.16) Bottom view Pin-Out Weight: 26 g (0.92 oz) Pin diameter: 0.5 (0.02) (ntc = not to connect) Outline Dimensions Pin Single Dual 1 ntc ntc 2 +Vout Vout 1 3 –Vout Common 4 ntc Vout 2 5 AC (L) AC (L) 6 AC (N) AC (N) 7 ntc ntc AC/DC Power Modules TMLM Series 4 to 20 Watt Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com AC/DC Power Modules TMLM Series 4 to 20 Watt Weight: 30 g (1.06 oz) Pin diameter: 1.0 (0.04) Rev. September 27. 2013 Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) Pin pitch tolerance: ±0.3 (±0.012) Max mounting screw penetration: 3.0 mm (0.12) TMLM 10 Models: Weight: 54 g (1.91 oz) Page 4 of 4 Outline Dimensions AC 25.4 (1.00) 20.32 (0.80) 10.16 (0.40) Bottom view 2.6 (0.81) 2.54 (0.10) 45.72 (1.80) 50.8 (2.00) AC +Vout – Vout 15.16 (0.59) 8.0 (0.31) 23.5 (0.93) 8.0 (0.31) AC 27.2 (1.07) 20.32 (0.80) 10.16 (0.40) Bottom view 3.5 (0.13) 3.4 (0.13) 45.72 (1.80) 52.4 (2.06) AC +Vout – Vout M3 THD 13.65 (0.54) 4.50 (0.18) AC 27.2 (1.07) 20.32 (0.80) 10.16 (0.40) Bottom view 3.5 (0.13) 3.4 (0.13) 45.72 (1.80) 52.4 (2.06) AC +Vout – Vout 23.5 (0.93) 8 (0.31) M3 THD 13.65 (0.54) 4.50 (0.18) TMLM 20 Models: Pin diameter: 1.0 (0.04) Pin diameter: 1.0 (0.04) TMLM 05 Models: Weight: 59 g (2.08 oz) http://www.tracopower.com Features ◆ Ultra compact, low profile plastic casing ◆ Fully encapsulated (pollution/dust) ◆ Single-, dual- and triple output models ◆ 2 package versions: - Screw terminal block for chassis mount - Solder pins for direct PCB mount ◆ DIN-rail mount adaptor (optional) ◆ Universal input 85-264 VAC, 47-440 Hz ◆ Protection class ll ◆ IEC/EN/UL 60950-1 approval, CB-report ◆ Over-temperature protection ◆ Protection against short circuit and oveload ◆ 3-year product warranty The TMP & TMPM series AC/DC Power Modules is a new range of fully encapsulated power supplies in an ultra-compact casing. They feature easy chassis mounting with screw terminal block connection or direct PCB mounting with solder pins. Full compliance with International safety standards for industrial control equipment qualifies the products for worldwide markets. These power supplies offer a cost effective solution for many space critical applications in commercial and industrial electronic equipment and for polluted and dusty environment. AC/DC Power Modules TMP & TMPM Series, 4 to 60 Watt Page 1 of 9 15 to 60 Watt and multi output models see next page --> CB Scheme UL 60950-1 UL 508 Order code Output power max. Output Efficiency PCB-mount with solder pins typ. TMPM 04103 3.3 VDC / 1200 mA 70 % TMPM 04105 5.0 VDC / 800 mA 72 % TMPM 04109 9.0 VDC / 444 mA 75 % TMPM 04112 4 W 12 VDC / 333 mA 76 % TMPM 04115 15 VDC / 267 mA 76 % TMPM 04124 24 VDC / 167 mA 77 % TMP 07103 4.6 W 3.3 VDC / 1400 mA 70 % TMP 07105 5.0 VDC / 1400 mA 73 % TMP 07112 7 W 12 VDC / 583 mA 78 % TMP 07115 15 VDC / 466 mA 78 % TMP 07124 24 VDC / 291 mA 78 % TMPM 10103 8.3 W 3.3 VDC / 2500 mA 70 % TMPM 10105 5.0 VDC / 2000 mA 72 % TMPM 10112 10 W 12 VDC / 833 mA 76 % TMPM 10115 15 VDC / 667 mA 75 % TMPM 10124 24 VDC / 417 mA 72 % TMP 10103 6.6 W 3.3 VDC / 2000 mA 70 % TMP 10105 5.0 VDC / 2000 mA 73 % TMP 10112 10 W 12 VDC / 833 mA 76 % TMP 10115 15 VDC / 666 mA 76 % TMP 10124 24 VDC / 416 mA 76 % Single Output Models 4 to 10 Watt Low profile Small footprint http://www.tracopower.com AC/DC Power Modules TMP & TMPM Series 4 to 60 Watt Page 2 of 9 Order code Output power max. Output Efficiency PCB-mount with solder pins Chassis mount, screw terminal typ. TMP 15105 TMP 15105C 5 VDC / 3000 mA 75 % TMP 15112 TMP 15112C 12 VDC / 1250 mA 79 % TMP 15115 TMP 15115C 15 W 15 VDC / 1000 mA 79 % TMP 15124 TMP 15124C 24 VDC / 625 mA 79 % TMP 15148 TMP 15148C 48 VDC / 310 mA 79 % TMP 30105 TMP 30105C 5 VDC / 6000 mA 78 % TMP 30112 TMP 30112C 12 VDC / 2500 mA 80 % TMP 30115 TMP 30115C 30 W 15 VDC / 2000 mA 80 % TMP 30124 TMP 30124C 24 VDC / 1250 mA 80 % TMP 30148 TMP 30148C 48 VDC / 625 mA 80 % TMP 60105 TMP 60105C 51 W 5.1 VDC / 10‘000 mA 79 % TMP 60112 TMP 60112C 12 VDC / 5000 mA 82 % TMP 60115 TMP 60115C 15 VDC / 4000 mA 83 % TMP 60124 TMP 60124C 60 W 24 VDC / 2500 mA 84 % TMP 60136 TMP 60136C 36 VDC / 1665 mA 84 % TMP 60148 TMP 60148C 48 VDC / 1250 mA 84 % Single Output Models 15 to 60 Watt Peak current, total power not to exceede 30 Watt: 1) 133 % 2) 150 % 3) 200 % Order code Output Output 1 Output 2 Output 3 Eff. PCB-mount Chassis mount power typ. Models with common ground TMPM 04212 +12 VDC / 166 mA –12 VDC / 166 mA 77 % TMPM 04215 4 W +15 VDC / 133 mA –15 VDC / 133 mA 77 % TMPM 04253 +5.0 VDC / 600 mA +3.3 VDC / 150 mA 72 % TMPM 04225 +12 VDC / 250 mA +5.0 VDC / 120 mA 75 % TMP 10212 10 W +12 VDC / 380 mA –12 VDC / 380 mA 77 % TMP 10215 +15 VDC / 300 mA –15 VDC / 300 mA 77 % TMP 15212 TMP 15212C 15 W +12 VDC / 650 mA –12 VDC / 650 mA 79 % TMP 15215 TMP 15215C +15 VDC / 500 mA –15 VDC / 500 mA 79 % TMP 30212 TMP 30212C 30 W +12 VDC / 1300 mA –12 VDC / 1300 mA 80 % TMP 30215 TMP 30215C +15 VDC / 1000 mA –15 VDC / 1000 mA 80 % Models with output 1 isolated from output 2/3 (floating) TMP 15252 TMP 15252C 5.0 VDC / 1500 mA 12 VDC / 625 mA 72 % TMP 15512 TMP 15512C 15 W 5.0 VDC / 2000 mA +12 VDC / 200 mA –12 VDC / 200 mA 74 % TMP 15515 TMP 15515C 5.0 VDC / 2000 mA +15 VDC / 150 mA –15 VDC / 150 mA 74 % TMP 30252 TMP 30252C 5.0 VDC / 3000 mA2) 12 VDC /1250 mA2) 76 % TMP 30512 TMP 30512C 5.0 VDC / 3000 mA2) +12 VDC / 600 mA2) –12 VDC / 600 mA2) 76 % TMP 30515 TMP 30515C 30 W 5.0 VDC / 3000 mA2) +15 VDC / 500 mA2) –15 VDC / 500 mA2) 76 % TMP 30522 TMP 30522C 5.0 VDC / 3000 mA2) +12 VDC / 1000 mA2) –12 VDC / 250 mA3) 76 % TMP 30316 TMP 30316C 3.3 VDC / 4000 mA1) +5.0 VDC / 1500 mA1) +12 VDC / 250 mA3) 71 % TMP 30317 TMP 30317C 5.0 VDC / 4500 mA1) +3.3 VDC / 1000 mA2) +12 VDC / 250 mA3) 71 % Multi Output Models 4 to 30 Watt http://www.tracopower.com AC/DC Power Modules TMP & TMPM Series 4 to 60 Watt Page 3 of 9 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Max. capacitive load [μF] Model series Output: TMPM 04 TMP 07 TMPM 10 TMP 10 TMP 15 TMP 30 TMP 60 Single output models: 3.3 VDC 1200 2200 2200 3900 - - - 5.0 / 5.1 VDC 800 2200 2200 3300 3900 8000 8000 9.0 VDC 440 - - - - - - 12 / 15 VDC 260 1000 1000 2200 2200 3900 3900 24 VDC 160 680 680 1000 1000 1500 1500 36 VDC - - - - - - 1000 48 VDC - - - - 680 1000 800 Dual output models: 3.3 / 5.0 VDC 4700 - - - 2000 3900 - +12 / –12 / +15 / –15 VDC 260 - - 1000 1500 1500 - Triple output models: 3.3 / 5.0 VDC - - - - 2200 2200 - +12 / –12 / +15 / –15 VDC - - - - 1500 1500 - Input Specifications Input voltage – nominal 100 – 240 VAC – AC range (universal input) 85 – 264 VAC – DC range 120 – 370 VDC Input frequency – nominal 50 / 60 Hz – range 4 – 30 W models: 47 – 440 Hz 60 W models: 47 – 63 Hz Input current at full load – 115 VAC / 230 VAC input 4 W models: 80 mA / 55 mA typ. 7 W models: 150 mA / 100 mA typ. 10 W models: 200 mA / 130 mA typ. 15 W models: 300 mA / 190 mA typ. 30 W models: 550 mA / 330 mA typ. 60 W models: 1050 mA / 670 mA typ. External input fuse required (recommended value) 4 W models: 1.0 A slow blow 7 – 15 W models: 2.0 A slow blow 30 W models: 3.5 A slow blow 60 W models: 6.3 A slow blow Output Specifications Voltage set accuracy ±2 % max. Regulation – Input variation Output 1 1 % max. – Input variation Output 2/3 3 % max. – Load variation TMPM 04103 model (0–100%): 1.5 % max. single and floating outputs (10–100%): 1 % max. (0–100% for TMPM 04 models) common ground outputs balanced load (10–100%): 2.5 % max. common ground outputs unbalanced load (20/90%): 5.0 % max. Minimum load TMPM 04 single and sym.dual models: not required TMPM 04 asym. dual models: 25% per output single and dual output models: 10 % of rated max. current triple output models main output: 10 % of rated max. current triple output models auxiliary outputs: 20 % of rated max. current operation at lower load condition will not damage these power supplies, however, they may not meet all listed specifications. Ripple and noise (20MHz bandwidth) 3.3 VDC & 5.0 VDC outputs: 1.8 % of Vout [mVp-p] other outputs: 1.0 % of Vout [mVp-p] Overload protection by current limit 105 % min. of Inom, fold back, automatic recovery (long term overload condition may cause damage to the power supply) Overvoltage protection by Zehner diode (main output only) 120 % of Vout typ. Start-up time 400 ms typ. Hold-up time 20 ms typ. http://www.tracopower.com Page 4 of 9 AC/DC Power Modules TMP & TMPM Series 4 to 60 Watt All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. General Specifications Temperature ranges – Operating TMPM 04 models: –25°C to +60°C (no derating) TMP 10 models: –25°C to +50°C (no derating) other models: –25°C to +70°C (with derating) – Storage (non-operating) –40°C to +85°C Power derating 3.3 %/K above +50°C to +65°C 5.0 %/K above +65°C to +70°C (no derating aproved for TMPM04 and TMP10 models) Over temperature protection at 90°C (automatic recovery at 67°C) Temperature coefficient 0.02 %/K Humidity (non-condensing) 95 % rel. H max. Switching frequency 100 kHz typ. fixed Isolation voltage (60 sec.) – Input/Output 3‘000 VAC Isolation resistance – Input/Output 100 MOhm (at 500 VDC) Altitude during operation TMP 10, TMPM 04 & 10, : 2‘000 m max. (6’560 ft) approved other models: 3‘000 m max. (9‘840 ft) approved Electromagnetic compatibility (EMC), Emissions EN 61000-6-3: 2007 EN 61204-3: 2000, class A EN 55022, level B, FCC Part 15 level B Electromagnetic compatibility (EMC), Immunity EN 61000-6-2: 2005 EN 61204-3: 2000, class A – Electrostatic discharge ESD EN 61000-4-2 8 kV / 4 kV, criteria B – RF field susceptibility EN 61000-4-3 10 V/m, criteria A – Electrical fast transient / burst immunity input EN 61000-4-4 ±2 kV, criteria B – Electrical fast transient / burst immunity output EN 61000-4-4 ±2 kV, criteria B – Surge immunity line – neutral EN 61000-4-5, ±1 kV, criteria B – Surge immunity output EN 61000-4-5 ±0.5 kV, criteria B – Immunity to conducted RF disturbances EN 61000-4-6 10 V, criteria B – Mains voltage dips and interruptions EN 61000-4-11 30 % 10 ms, criteria B 60 % 100 ms, criteria C 95 % 5000 ms, criteria C EMC test certificates www.tracopower.com/products/tmp-emc.pdf Protection class II to IEC/EN 60536 Safety standards – Information technology equipment IEC/EN 60950-1, UL 60950-1 – Industrial control equipment UL/cUL 508 (chassis mount single and symetric dual output models only) Safety approvals – CB certificate for IEC 60950-1 TMPM 04 models: www.tracopower.com/products/tmpm04-cb.pdf TMP 07 models: www.tracopower.com/products/tmp07-cb.pdf TMP 10 models: www.tracopower.com/products/tmp10-cb.pdf TMPM 10 models: www.tracopower.com/products/tmpm10-cb.pdf TMP 15 models: www.tracopower.com/products/tmp15-cb.pdf TMP 30 single output models: www.tracopower.com/products/tmp30-cb.pdf TMP 30 dual / triple output models: www.tracopower.com/products/tmp30-cb2.pdf TMP 60 models: www.tracopower.com/products/tmp60-cb.pdf – UL approvals for UL 60950-1 www.ul.com -> certifications -> File: e188913 – UL approval for UL 508 (chassis mount models only) www.ul.com -> certifications -> File: e322109 Reliability /calculated MTBF TMP 07, TMPM 04 & 10 models: >330‘000 h (MIL-HDBK-217F, at +25°C, ground benign) TMP 10 models: >300‘000 h TMP 15 models: >280‘000 h TMP 30 models: >250‘000 h TMP 60 models: >125‘000 h Casing material plastic resin + fiberglass (UL 94V-0 rated) Environmental compliance – Reach www.tracopower.com/products/tmp-reach.pdf – RoHS RoHS directive 2011/65/EU http://www.tracopower.com Page 5 of 9 AC/DC Power Modules TMP & TMPM Series 4 to 60 Watt Outline Dimensions Pin diameter: 1.0 (0.04) TMP 07 models: TMP 10 models: Weight: 44 g (1.55 oz) Dimensions in [mm], ( ) = Inches Case tolerances: ±0.5 (±0.02) Pin pich tolerance: ±0.25 (±0.01) 19.3 0.5 6.0 5.0 (0.02) (0.24) (0.76) (0.20) 5.0 (0.20) 2 1 4 3 10.16 25.4 20.32 2.54 45.72 50.80 (0.40) (1.00) (0.80) (0.10) Bottom view (1.80) (2.00) 2.54 (0.10) Pin Single 1 AC (N) 2 AC (L) 3 +Vout 4 –Vout Pinout 2 1 5 4 3 10.16 10.16 45.0 17.78 19.0 0.5 6.0 54.0 64.0 5.0 (0.40) (0.40) (1.77) (0.70) (0.02) (0.24) (0.75) (0.20) 5.0 (0.20) Bottom view (2.13) (2.52) 4.0 (0.16) 22.5 (0.89) Pin Single Dual 1 AC (N) AC (N) 2 AC (L) AC (L) 3 –Vout Vout 2 4 ntc com.1/2 5 +Vout Vout 1 Pinout Pin diameter: 1.0 (0.04) Weight: 92 g (3.25 oz) (ntc = not to connect) TMPM 10 models: 23.5 0.7 10.0 5.0 (0.03) (0.39) (0.93) (0.20) 5.0 (0.20) 2 1 4 3 10.16 27.2 20.32 3.45 45.72 52.4 (0.40) (1.07) (0.80) (0.14) Bottom view (1.80) (2.06) 3.35 (0.13) Pin Single 1 AC (N) 2 AC (L) 3 +Vout 4 –Vout Pinout Pin diameter: 1.0 (0.04) Weight: 54 g (1.90 oz) 7.50 (0.30) Bottom view 14.00 (0.55) 2x3.75 (2x0.15) 3.75 (0.15) 36.5 (1.44) 27.0 (1.06) 3.00 21.00 (0.83) (0.12) 7.50 (0.30) 25.25 (0.99) 17.1 (0.67) 4.0 (0.16) 1 2 3 4 5 6 7 TMPM 04 models: Pin diameter: 0.5 (0.02) Weight: 26 g (0.92 oz) Pin Single Dual 1 ntc 2 ntc 3 +Vout Vout 1 4 –Vout com.1/2 5 ntc Vout 2 6 AC (N) 7 AC (L) Pinout (ntc = not to connect) http://www.tracopower.com Page 6 of 9 AC/DC Power Modules TMP & TMPM Series 4 to 60 Watt Outline Dimensions TMP 15 models for PCB mount: TMP 15 models for chassis mount: Dimensions in [mm], ( ) = Inches Case tolerances: ±0.5 (±0.02) Pin pich tolerance: ±0.25 (±0.01) Mounting hole tolerance: ±0.25 (±0.02) 2 1 6 5 4 11.43 54.0 20.32 62.0 74.0 (0.45) (2.13) (0.80) Bottom view (2.44) (2.91) 3 8.89 (0.35) 7 27.0 (1.06) 11.43 (0.45) 8.89 (0.35) 2 x M4 THD 19.9 (0.78) 19.9 (0.78) 40.0 (1.57) 6.0 (0.24) 19.3 0.5 6.0 5.0 (0.02) (0.24) (0.76) (0.20) 5.0 (0.20) Pin Single Dual sym. Dual asym. Triple 1 AC (N) 2 AC (L) 3 no pin Vout 3 4 –Vout Vout 2 –Vout 2 com.2/3 5 no pin com.1/2 +Vout 2 Vout 2 6 +Vout Vout 1 –Vout 1 –Vout 1 7 no pin +Vout 1 +Vout 1 Pin-Out 3 4 5 6 7 1 2 Top view 86.0 96.0 (3.39) (3.78) 5.0 (0.20) 54.0 (2.13) 4.0 (0.16) 46.0 (1.81) 10.0 76.0 (2.99) (0.39) 23.3 (0.92) 5.0 (0.20 11.8 (0.46) 4 x ø3.5 Pin Single Dual sym. Dual asym. Triple 1 AC (N) 2 AC (L) 3 ntc Vout 3 4 –Vout Vout 2 –Vout 2 com.2/3 5 ntc com.1/2 +Vout 2 Vout 2 6 +Vout Vout 1 –Vout 1 –Vout 1 7 ntc +Vout 1 +Vout 1 Connection (ntc = not to connect) Pin diameter: 1.0 (0.04) Weight: 114 g (4.02 oz) Weight: 162 g (5.71 oz) Max Screw penetration: 5.5 (0.21) http://www.tracopower.com Page 7 of 9 AC/DC Power Modules TMP & TMPM Series 4 to 60 Watt Outline Dimensions TMP 30 models for PCB mount: 2 1 6 5 4 63.5 31.75 81.3 88.9 (2.50) (1.25) Bottom view (3.20) (3.50) 7 3 27.94 (1.10) 12.70 (0.50) 15.24 (0.60) 2 x M4 THD 27.5 (1.08) 3.8 (0.15) 5.0 (0.20) 27.65 (1.09) 12.70 (0.50) 15.24 (0.60) 27.94 (1.10) 21.5 0.5 6.0 5.0 (0.02) (0.24) (0.85) (0.20) 5.0 (0.20) Pin Single Dual sym. Dual asym. Triple 1 AC (N) 2 AC (L) 3 +Vout Vout 1 +Vout 2 Vout 2 4 no pin / ntc +Vout 1 +Vout 1 5 –Vout com.1/2 –Vout 2 com 2/3 6 no pin / ntc –Vout 1 –Vout 1 7 ntc Vout 2 ntc Vout 3 Pinout / Connection (ntc = not to connect) Dimensions in [mm], ( ) = Inches Case tolerances: ±0.5 (±0.02) Pin pich tolerance: ±0.25 (±0.01) Mounting hole tolerance: ±0.25 (±0.02) Pin diameter: 1.0 (0.04) Weight: 177 g (6.24 oz) TMP 30 models for chassis mount: Weight: 191 g (6.74 oz) 3 4 5 6 7 1 2 Top view 100.0 112.0 (3.94) (4.41) 6.0 (0.24) 63.8 (2.51) 6.9 (0.27) 50.0 (1.97) 4 x ø3.5 10.0 92.0 (3.62) (0.39) 25.6 (1.01) 5.0 (0.20) 11.8 (0.46) Max Screw penetration: 5.5 (0.21) http://www.tracopower.com Page 8 of 9 AC/DC Power Modules TMP & TMPM Series 4 to 60 Watt Outline Dimensions TMP 60 models for chassis mount: (ntc = not to connect) Dimensions in [mm], ( ) = Inches Case tolerances: ±0.5 (±0.02) Mounting hole tolerance: ±0.25 (±0.02) Weight: 357 g (12.95 oz) Pin Single 1 AC (N) 2 AC (L) 3 ntc 4 +Vout 5 ntc 6 –Vout 7 ntc Connection 3 4 5 6 7 1 2 Top view 100.0 112.0 (3.94) (4.41) 6.0 (0.24) 67.8 (2.67) 8.9 (0.35) 50.0 (1.97) 4 x ø3.5 10.0 92.0 (3.62) (0.39) 38.0 (1.50) 5.0 (0.20) 11.8 (0.46) TMP 60 models for PCB mount: 2 1 6 4 67.5 33.75 81.3 89.0 (2.66) (1.33) Bottom view (3.20) (3.50) 7 3 27.94 (1.10) 12.70 (0.50) 15.24 (0.60) 2 x M4 THD 27.5 (1.08) 3.85 (0.15) 5.55 (0.219) 27.05 (1.065) 12.70 (0.50) 15.24 (0.60) 27.94 (1.10) 34.0 0.5 6.0 5.0 (0.02) (0.24) (1.34) (0.20) 5.0 (0.20) Weight: 345 g (12.17 oz) Pin diameter: 2.0 (0.08) Pin Single 1 AC (N) 2 AC (L) 3 no pin 4 +Vout 6 –Vout 7 no pin Pinout Max Screw penetration: 5.5 (0.21) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Page 9 of 9 AC/DC Power Modules TMP & TMPM Series 4 to 60 Watt DIN-Rail Mounting Kit Order code For models TMP-MK1 TMP 15xxxC TMP-MK2 TMP 30xxxC & TMP 60xxxC DIN-Rail Mounting Kit Adapter for mounting on DIN-rails as per EN 50022-35 (snap-on mounting) Specifications can be changed any time without notice. Kit contains interface plate, DIN-rail clip and necessary screws. Rev. June 19. 2013 http://www.farnell.com/datasheets/1749862.pdf http://www.tracopower.com Page 1 of 3 DC/DC Converters TMR 2 Series, 2 Watt Features ◆ Wide 2:1 input voltage range ◆ Compact SIP-8 package ◆ Small footprint ◆ Full SMD design ◆ Temperature range –40° to +85°C ◆ High efficiency ◆ Excellent load and line regulation ◆ Indefinite short-circuit protection ◆ I/O isolation 1000VDC ◆ Remote On/Off control ◆ Fully RoHS compliant ◆ 3-year product warranty Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TMR 0510 3.3 VDC 500 mA 76 % TMR 0511 5 VDC 400 mA 80 % TMR 0512 4.5 – 9.0 VDC 12 VDC 165 mA 81 % TMR 0521 (5 VDC nominal) ±5 VDC ±200 mA 79 % TMR 0522 ±12 VDC ±85 mA 82 % TMR 0523 ±15 VDC ±65 mA 81 % TMR 1210 3.3 VDC 500 mA 77 % TMR 1211 5 VDC 400 mA 81 % TMR 1212 9 – 18 VDC 12 VDC 165 mA 83 % TMR 1221 (12 VDC nominal) ±5 VDC ±200 mA 81 % TMR 1222 ±12 VDC ±85 mA 83 % TMR 1223 ±15 VDC ±65 mA 84 % TMR 2410 3.3 VDC 500 mA 78 % TMR 2411 5 VDC 400 mA 81 % TMR 2412 18 – 36 VDC 12 VDC 165 mA 83 % TMR 2421 (24 VDC nominal) ±5 VDC ±200 mA 80 % TMR 2422 ±12 VDC ±85 mA 83 % TMR 2423 ±15 VDC ±65 mA 82 % TMR 4810 3.3 VDC 500 mA 76 % TMR 4811 5 VDC 400 mA 78 % TMR 4812 36 – 75 VDC 12 VDC 165 mA 83 % TMR 4821 (48 VDC nominal) ±5 VDC ±200 mA 80 % TMR 4822 ±12 VDC ±85 mA 81 % TMR 4823 ±15 VDC ±65 mA 81 % Models The TMR-2 series is a family of isolated 2W dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. The product comes in a compact SIP-8 plastic package with small footprint occupying only 2.0 cm2 (0.3 square in.) of board space. An excellent efficiency allows –40° to +85°C operation temperatures. Further features include remote On/Off control and continuous short circuit protection. The ultra-compact dimensions of these converters make them an ideal solution for many space critical applications in communication equipment, instrumentation and industrial electronics. UL 60950-1 http://www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. DC/DC Converters TMR 2 Series 2 Watt Input Specifications Input current at full load (nominal input) 5 Vin models: 645 mA max. 12 Vin models: 242 mA max. 24 Vin models: 117 mA max. 48 Vin models: 62 mA max. Surge voltage (100 msec. max.) 5 Vin models: 15 V max. 12 Vin models: 36 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Input voltage variation (dv/dt) 5 V/ms, max. (complies to ETS 300 132 part. 4.4) Input Filter capacitor type Start up time 5 ms typ. (at nominal input and resistive load) ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A – external input capacitor Nippon chemi-con KY 220 μF, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.2 % max. – No load to full load single output models: ±1.0 % max. dual output models: ±1.0 % max. – Load variation 10 – 90 % single output models: ±0.5 % max. dual output models: ±0.8 % max. dual output models asymetric load: 5.0 % max. (25% / 100%) Minimum load 0 % Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Temperature coefficient ±0.02 %/°C Transient response (25% load step change) 500 μs typ. Short circuit protection continuous, automatic recovery Capacitive load 3.3 VDC / 5 VDC output models: 2’200 μF max. / 1’000 μF max. 12 VDC / ±5 VDC output models: 170 μF max. / ±470 μF max. ±12 VDC / ±15 VDC output models: 100 μF max. / ±47 μF max. General Specifications Temperature ranges – Operating –40°C to +85°C (non derating) – Storage –55°C to +125°C Derating (convection cooling) 2 %/K above 75°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (Telcordia SR-332, 50% stress, Ta=40°C) 5.1 Mio. h Isolation voltage (60 sec.) – Input/Output 1’600 VDC Isolation capacitance – Input/Output 200 pF max. Isolation resistance – Input/Output (500 VDC) >1‘000 MOhm Switching frequency 100 to 650 kHz (PFM) Page 3 of 3 Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com DC/DC Converters TMR 2 Series 2 Watt Outline Dimensions mm (inches) Bottom view 3.2 (0.13) 0.5 (0.02) 0.25 (0.01) 2.54 2.0 ± 0.5 2.54 21.8 5.08 2.54 0.5 (0.02) 11.1 (0.44) (0.08 (0.1) (0.1) (0.1) ± 0.025) (0.2) 4.0 2.54 (0.1) 2.54 (0.1) (0.86) (0.16) 9.2 (0.36) 1 2 3 5 6 7 8 Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 Remote On/Off Remote On/Off 5 No function No function 6 +Vout +Vout 7 –Vout Common 8 No function –Vout Pin-Out Rev. August 09/13 Dimensions in [mm], () = Inch Pin pitch tolerances: ±0.25 (±0.01) Tolerances: ±0.5 (±0.02) General Specifications Remote On/Off – On: open or high impedance – Off: 2...4 mA input current applied via 1KW resistor – Off stand by input current max. 2.5 mA Safety standards UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Thermal shock, mechanical shock & vibration MIL-STD-810F – Test conditions www.tracopower.com/products/mil810.pdf Environmental compliance – Reach www.tracopower.com/products/tmr2-reach.pdf – RoHS RoHS Directive 2011/65/EU Altitude – operation < 40’000ft (12’000m) – non operation < 50’000ft (15’000m) – test report www.tracopower.com/products/tmr-altitude.pdf Physical Specifications Casing material non-conductive plastic Potting material epoxy (UL 94V-0-rated) Weight 4.8 g (0.17oz) Physical Specifications Application note: www.tracopower.com/products/tmr2-application.pdf http://www.tracopower.com Page 1 of 4 DC/DC Converters TMR 1 & TMR 1SM Series, 1 Watt Order code SIP-package Order code SMD-package Input voltage range Output voltage Output current max. Efficiency SIP typ. Efficiency SMD typ. TMR 1-0511 TMR 1-0511SM 5.0 VDC 200 mA 76 % 78 % TMR 1-0512 TMR 1-0512SM 12 VDC 83 mA 77 % 79 % TMR 1-0513 TMR 1-0513SM 4.5 – 9.0 VDC 15 VDC 67 mA 79 % 81 % TMR 1-0515 (5 VDC nominal) 24 VDC 42 mA 76 % TMR 1-0522 TMR 1-0522SM ±12 VDC ±42 mA 77 % 79 % TMR 1-0523 TMR 1-0523SM ±15 VDC ±33 mA 78 % 80 % TMR 1-1211 TMR 1-1211SM 5.0 VDC 200 mA 77 % 79 % TMR 1-1212 TMR 1-1212SM 12 VDC 83 mA 77 % 79 % TMR 1-1213 TMR 1-1213SM 9.0 – 18 VDC 15 VDC 67 mA 80 % 82 % TMR 1-1215 (12 VDC nominal) 24 VDC 42 mA 77 % TMR 1-1222 TMR 1-1222SM ±12 VDC ±42 mA 79 % 81 % TMR 1-1223 TMR 1-1223SM ±15 VDC ±33 mA 78 % 80 % TMR 1-2411 TMR 1-2411SM 5.0 VDC 200 mA 77 % 79 % TMR 1-2412 TMR 1-2412SM 12 VDC 83 mA 80 % 82 % TMR 1-2413 TMR 1-2413SM 18 – 36 VDC 15 VDC 67 mA 80 % 82 % TMR 1-2415 (24 VDC nominal) 24 VDC 42 mA 77 % TMR 1-2422 TMR 1-2422SM ±12 VDC ±42 mA 80 % 82 % TMR 1-2423 TMR 1-2423SM ±15 VDC ±33 mA 80 % 82 % TMR 1-4811 TMR 1-4811SM 5.0 VDC 200 mA 77 % 79 % TMR 1-4812 TMR 1-4812SM 12 VDC 83 mA 78 % 80 % TMR 1-4813 TMR 1-4813SM 36 – 75 VDC 15 VDC 67 mA 78 % 80 % TMR 1-4815 (48 VDC nominal) 24 VDC 42 mA 76 % TMR 1-4822 TMR 1-4822SM ±12 VDC ±42 mA 79 % 81 % TMR 1-4823 TMR 1-4823SM ±15 VDC ±33 mA 79 % 81 % Models Features ◆ Wide 2:1 input voltage range ◆ Compact SIP-6 or SMD package ◆ Fully regulated outputs ◆ Cost optimised design ◆ No minimum load required ◆ Continuous short circuit protection ◆ Temperature range –40°C to +85°C ◆ I/O isolation 1500 VDC ◆ Remote On/Off control (SMD) ◆ 3-year product warranty The TMR-1 and TMR 1SM series are families of isolated 1 W dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. These products come in a compact SIP-6 or SMD package with small footprint occupying only 1.2 cm2 (0.2 square inch) of board space. An excellent efficiency allows –40°C to +85°C operation temperature. Further features include remote On/Off control (SMD-Version) and continuous short circuit protection. The compact dimensions and cost optimised design make this converters an ideal solution for applications in communication equipment, instrumentation and industrial electronics. CB Scheme http://www.tracopower.com Page 2 of 4 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. DC/DC Converters TMR 1 & TRM 1SM 1 Watt Input Specifications Input current at no load (nominal input voltage) 5.0 V models: 40 mA typ. 12 V models: 20 mA typ. 24 V models: 10 mA typ. 48 V models: 7 mA typ. Surge voltage (1 sec. max.) 5.0 V models: 15 V max. 12 V models: 25 V max. 24 V models: 50 V max. 48 V models: 100 V max. Start-up voltage / under voltage lockout 5.0 V models: 4.5 VDC / 4 VDC or lower 12 V models: 9 VDC / 8.5 VDC or lower 24 V models: 18 VDC / 17 VDC or lower 48 V models: 36 VDC / 34 VDC or lower long term operation at undervoltage will damage the converter! Conducted noise (input) EN 55022 level A, FCC part 15, level A with external capacitor. see EMC consideration Recommended input fuse (slow blow) 5 V models: 500 mA 12 V models: 250 mA 24 V models: 120 mA 48 V models: 60 mA Output Specifications Voltage set accuracy ±1 % max. Regulation – Input variation Vin min. to Vin max. 0.2 % max. – No load to full load Single & Dual output models: ±1.0 % max. – Load variation 10 – 90% Single output models: ±0.5 % max. Dual output models (balanced load): ±0.8 % max. Minimum load no minimum load required Temperature coefficient 0.02 %/K Ripple and noise (20 MHz bandwidth) SMD models: 30 mVp-p max. SIP models: 50 mVp-p max. Transient response setting time (25% load step change) 250 μs typ. (PFM) Current limitation >120 % of Iout max. Short circuit protection continuous, automatic recovery Capacitive load 5 VDC models: 1‘680 μF max. 12 VDC models: 820 μF max. 15 VDC models: 680 μF max. 24 VDC models: 470 μF max. ±12 VDC models: 470 μF max. (each output) ±15 VDC models: 330 μF max. (each output) General Specifications Temperature ranges – Operating SIP models: –40°C to +85°C with no derating SMD models: –40°C to +82°C with derating – Case temperature +105°C (SIP) / +95°C (SMD) max. – Storage –55°C to +125°C Load derating SMD models: 7.2 %/K above +75°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2.8 Mio h Page 3 of 4 DC/DC Converters TMR 1 & TRM 1SM 1 Watt General Specifications Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 50 pF max. Isolation resistance – Input/Output (500 VDC) >1 GOhm Switching frequency 220 kHz (PFM) Safety standards UL 60950-1, IEC/EN 60950-1 IEC 60950-1:2005 (2nd Edition); Am 1:2009 EN 60950-1:2006+A11:2009+A1:2010+A12:2011 Safety approvals – CB test certificate (IEC 60950-1) www.tracopower.com/products/tmr1-cb.pdf Remote On/Off – On: < 0.6 VDC or open circuit (SMD models only) – Off: 2.7 to 15 VDC (ref. to –Vin) – Off standby current: 2.5 mA max. – Off control input current: 1 mA max. Physical Specifications Casing material non-conductive plastic (UL94V-0 rated) Potting material epoxy, (UL 94V-0 rated) Weight 3.1 g (0.11oz) (SIP)/3.3 g (0.12oz) (SMD) Soldering profile for SIP-package models max. 265°C / 10 sec. (wave soldering) Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at: www.jedec.org - free registration required) Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at: www.jedec.org - free registration required) Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU EMC Consideration +Vin -Vin +Vout -Vout C1 C2 L1 Load +Vin -Vin +Vout -Vout C1 C2 L1 Load Com. Load Single output models Input models C1 C2 L1 5 VDC 4.7μF /50V, 1210 X7R 4.7μH / 1.2 A, SR0302 12 VDC 4.7μF /50V, 1210 X7R 4.7μH / 1.2 A, SR0302 24 VDC SIP 4.7μF /50V, 1210 X7R 18μH / 0.58 A, SR0302 24 VDC SMD 4.7μF /50V, 1210 X7R 220pF /2 kV, 1808 X7R 12μH / 0.75 A, SR0302 48 VDC SIP 4.7μF /100V 1210 X7R 18μH / 0.58A, SR0302 48 VDC SMD 2.2μF / 00V 1210 X7R 18μH / 0.58A, SR0302 Dual output models Filter suggestion for to comply with EN55022 class A conducted noise emission Outline Dimensions mm (inches) Page 4 of 4 Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. August 30. 2013 DC/DC Converters TMR 1 & TRM 1SM 1 Watt Pin single output dual output 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 4 +Vout +Vout 5 No Pin Common 6 –Vout –Vout Pinout Bottom view 1 2 5 6 2.5 2.54 0.5 2.3 ±0.4 2.54 17.0 (0.67) 5.08 (0.2) 2.54 0.5 (0.02) 11.0 (0.4) 3.2 (0.13) (0.02) 0.5 (0.02) (0.09 (0.1) (0.1) (0.1) ±0.02) 7.62 (0.30) (0.10) (0.02) 4 0.5 0.25 (0.01) Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) Pin pitch tolerances: ±0.25 (±0.01) SIP-Package SMD-Package 1 6 7 14 9 8 2 13.7 [0.54] 17.2 [0.68] 8.45 [0.33] 8.7 [0.34] 0.25 [0.01] 1.00 [0.04] 18.9 [0.74] 12.7 [0.5] [0.1] 1.8 [0.1] 2.54 0~4 S SEATING PLANE 0.15 S 1.1 [0.04] 15.0 [0.6] Pin single output dual output 1 –Vin (GND) –Vin (GND) 2 Remote On/Off Remote On/Off 6 ntc Common 7 ntc –Vout 8 +Vout +Vout 9 –Vout Common 14 +Vin +Vin Pinout ntc = not to connect to electrical circuit SOURIAU Contacts and tooling For series UTP,UTS,UTG,UTO,MBG Contacts 13 Amps Diam 1.6mm Manu. Part No. Stock N° Gender mm² Crimping Tools RM20M12K 273‐2951 Male 0.32‐0.52 RC20M12K 273‐2917 Female 0.32‐0.52 RM16M23K 273‐2945 Male 0.52‐1.50 RC16M23K 273‐2901 Female 0.52‐1.50 Y16RCM RM14M30K 687‐6367 Male 1.5‐2.5 RC14M30K 687‐6370 Female 1.5‐2.5 SM16ML1TK6 437‐3762 Male 0.80‐1.50 Y14MTV SC16ML1TK6 437‐3778 Female 0.80‐1.50 RM16SE0K 510‐1079 Male 0.52‐1.50 Solder RC16SE4K 510‐1085 Female 0.52‐1.50 Contacts 5 Amps Diam 1.00 mm Manu. Part No. Stock N° mm² Crimping Tools Gender SM24WL3S26 687‐6392 Male 0.13‐0.25 SC24WL3S26 687‐6383 Female 0.13‐0.25 SM20WL3S26 540‐410 Male 0.35‐0.50 Y14MTV SC20WL3S25 540‐422 Female 0.35‐0.50 RM18W3K 191‐046 Male 0.50‐1.00 MH860 + 86‐5 RC18W3K 190‐908 Female 0.50‐1.00 Tooling Manu. Part No. Stock N° Description Y16RCM 481‐008 Crimp Tool Y14MTV 480‐998 Crimp Tool MH860 314‐8408 Crimp Tool 86‐5 314‐8414 Positioner for MH860 RX2025GE1 481‐046 Extraction tool RX20D44 233‐2731 Extraction tool 851 Series MIL-DTL-26482 Connectors 3 851 Sommaire / Contents • Sommaire / Contents............................................................... • Etendue de la gamme / Product Overview...................... • Présentation / Presentation.................................................... • Description / Description........................................................ • Tableau comparatif références SOURIAU et normes équivalentes / Cross reference list...................................... • Caractéristiques techniques / Technical characteristics. • Contacts / Contacts ................................................................ • Références / Ordering information...................................... • Arrangements / Contact layouts.......................................... • Positionnements / Orientations............................................. • Encombrements Connecteurs Etanches / Dimensions Environmental Connectors..................................................... • Encombrements Connecteurs Hermétiques / Dimensions Hermetic Connectors............................................................. • Encombrements Connecteurs pour connexions enroulées et à picots droits / Dimensions Wire-wrap and PC tail Connectors....................................................................................... • Perçage cloison / Panel cut-out............................................ 3 3 4-5 6 7-8 9 10 11-13 14-15 16 17-38 39-40 40-41 41 • Accessoires / Accessories..................................................... • Bouchons / Caps....................................................................... • Références des raccords / Backshell ordering information................................................................................... • Outillages / Tools....................................................................... • Notice de câblage / Wiring instructions............................ • Sertissage / Crimping............................................................... • Schémas d’implantations pour circuits imprimés / Coordinates for PC tail............................................................. • Prise largable push-pull / Push-pull lanyard release plug................................................................................................ • Connecteurs filtres 8F51 / 8F51 filter connector........... • Connecteurs spécifiques & accessoires SNC / Specific products & SNC accessories.................................................. • Traversée de cloison 851 RJ45 / 851 RJ45 feedthru.. • Traversée de cloison 851 USB / 851 USB feedtrhu..... • 8XE / 8XE.................................................................................... • Protection sans cadmium / Cadmium free plating......... 42 44-45 46-47 48-50 51 52-54 55-59 60-61 62 63 65-68 69-72 73-76 77 851 page 4-63 851 RJ45 Feedthru page 65-68 851 USB Feedthru page 69-72 8XE page 73-76 Etendue de la gamme / Product Overview 4 851 Présentation • Versions étanches et hermétiques • Large choix de raccords et accessoires • Protection cadmiée vert olive, oxydée anodique noire, nickelée ou zinc nickel • Contacts à souder, à sertir, à picot droit ou pour enroulement de fils • Contacts spéciaux thermocouples • La version 851 avec contacts à souder est qualifiée QPL (USA) • La gamme 851 est aussi commercialisée par un réseau de distributeurs. Les connecteurs circulaires 851 Souriau, initialement conçus pour la connexion des circuits électriques en aéronautique et armement, ont aujourd’hui conquis les domaines diversifiés de l’électricité et de l’électronique industrielles (Mesure, Instrumentation, Transport, Machine, Outil, Productique…). Ils correspondent aux normes et spécifications internationales et nationales en vigueur MIL-DTL-26482G série 1, NFC 93422, HE 301B, VG 95328, liste GAM/T1. Les connecteurs fixes (embases) et mobiles (fiches), mâles ou femelles, se verrouillent entre eux par un système mécanique endurant du type à baïonnette à 3 rampes hélicoïdales. Cinq clavettes de guidage longitudinal et cinq positionnements angulaires possibles de l’isolant assurent le détrompage entre connecteurs. Les mécaniques sont en alliage d’aluminium traité et protégé pour la version 851 étanche, et en acier protégé pour la version 851 hermétique. Les isolants sont en élastomère de la classe +125°C pour la version étanche et en verre pour la version hermétique. Les contacts sont dorés ou étamés sur sous-couche nickel. Nous proposons, afin de faciliter le câblage, des contacts à souder et à picot taille 20 (y compris version hermétique) avec protection dorure sur la partie avant et étamage sur la partie arrière. 5 851 Presentation • Sealed and hermetic types • Wide choice of body styles and back fittings • Olive green, black anodised, nickel or zinc nickel plated • Solder, crimp, PC-tail and wire-wrap versions • Thermocouple crimp contacts available • The 851 version with solder contacts is on US QPL • 851 connectors are also widely available from distributors. Souriau 851 circular connectors were originally conceived to ensure reliable electrical connections in aircraft but their lightweight compact size and general characteristics have contributed to successful adoption in numerous civil and military aviation applications and also in the fields of professional and general electronics (machine tools, automation, measuring equipment…). 851 connectors conform to the following international standards, MIL-DTL-26482G series 1, NFC 93422, HE 301B, VG 95328, GAM/T1 list. 851 connectors feature a positive bayonet coupling mechanism which ensures reliable mechanical and electrical connection between mating halves. A helical locking ring on the plug couples with three dowel pegs on the receptacle ensuring rapid locking. Orientation and location is ensured by a system of five raised keys on the plugs which couple with corresponding slots on the receptacles. Connectors with different angular positioning of the insulator relative to the shell can be provided to prevent mating of adjacent connectors with the same contact arrangements. The connector shells are manufactured from aluminium alloy. The insulators are moulded from elastomer and are bonded into the shells. Grommets are also made from elastomer and are supplied with appropriate accessories in the solder version, but are integral with the insulator for the crimp version. Copper alloy contacts have gold or tin over nickel plating. Hermetic receptacles with gold plated solder contacts are made from steel shells with nickel plating (01H) or yellow cadmium plating (02H and 07H). The contacts are permanently fused into a glass insulator providing a high level of sealing. To facilitate cabling we offer solder and straight spill contacts size 20 (including hermetic versions) with a gold plated active part and tin plated terminations. 6 851 Description Connecteurs assemblés avec contacts à sertir à clips Connectors with clip retained crimp contacts Connecteurs assemblés (embase avec contacts à picots ou avec contacts pour connexions enroulés) Connectors assemblies (receptacle with PC tail or wire-wrap terminals) Connecteurs assemblés avec contacts à souder Connectors assemblies with solder contacts 1 • Isolant arrière (passe-fils) 2 • Contact femelle à sertir 3 • Isolant femelle 4 • Isolant mâle 5 • Contact mâle à sertir 6 • Raccord simple 7 • Corps de fiche 8 • Embase 1 • Rear insulator (grommet) 2 • Female crimp contact 3 • Female insulator 4 • Male insulator 5 • Male crimp contact 6 • Backnut 7 • Plug body 8 • Receptacle 1 • Contact femelle à souder 2 • Contact mâle à souder 3 • Isolant femelle 4 • Isolant mâle 5 • Isolant arrière (passe-fils) 6 • Embase à collerette carrée 7 • Raccord simple 8 • Corps de fiche 9 • Ecrou de fixation 10 • Embase à fixation par écrou 11 • Raccord simple (pour embase à fixation par écrou) 1 • Female solder contact 2 • Male solder contact 3 • Female insulator 4 • Male insulator 5 • Rear insulator (grommet) 6 • Square flange receptacle 7 • Backnut 8 • Plug body 9 • Fixing nut 10 • Jam nut receptacle 11 • Backnut (for jam nut receptacle) 1 • Contact mâle ou femelle à souder ou à sertir 2 • Contact mâle ou femelle à picots droits 3 • Contact mâle ou femelle pour connexions enroulées 4 • Isolant mâle ou femelle 5 • Isolant arrière (passe-fils) 6 • Corps de fiche 7 • Raccord simple 8 • Isolant mâle ou femelle 9 • Embase sans possibilité de raccord 1 • Male or female crimp or solder contact 2 • Male or female PC tail contact 3 • Male or female wire-wrap contact 4 • Male or female insulator 5 • Rear insulator (grommet) 6 • Plug body 7 • Backnut 8 • Male or female insulator 9 • Receptacle not suitable for backshells 7 851 * Non QPL - Not QPL 22.1631 Connecteurs avec raccords / Connectors with backshells SOURIAU NCF 93422 (modèle HE 301B) MIL-DTL-26482G série 1 VG 95328 851 00 R .. .. .. 50 .. HE 301 B 00 R .. .. .. 1A * MS 3120 E .. .. .. VG 95328 A .. .. .. 851 00 RC .. .. .. 50 .. HE 301 B 00 RC .. .. .. 1A * MS 3120 F .. .. .. VG 95328 B .. .. .. 851 00 RP .. .. .. 50 .. HE 301 B 00 RP .. .. .. 1A * MS 3120 P .. .. .. 851 00 RG .. .. .. 50 .. VG 95328 R .. .. .. 851 00 RA .. .. .. 50 .. HE 301 B 00 RA .. .. .. 1A 851 01 R .. .. .. 50 .. HE 301 B 01 R .. .. .. 1A * MS 3121 E .. .. .. 851 01 RC .. .. .. 50 .. HE 301 B 01 RC .. .. .. 1A * MS 3121 F .. .. .. 851 01 RP .. .. .. 50 .. HE 301 B 01 RP .. .. .. 1A * MS 3121 P .. .. .. 851 01 RA .. .. .. 50 .. HE 301 B 01 RA .. .. .. 1A 851 02 R .. .. .. 50 .. HE 301 B 02 R .. .. .. 1A * MS 3122 E .. .. .. VG 95328 C .. .. .. 851 06 R .. .. .. 50 .. HE 301 B 06 R .. .. .. 1A * MS 3126 E .. .. .. 851 06 RC .. .. .. 50 .. HE 301 B 06 RC .. .. .. 1A * MS 3126 F .. .. .. VG 95328 K .. .. .. 851 06 RP .. .. .. 50 .. HE 301 B 06 RP .. .. .. 1A * MS 3126 P .. .. .. 851 06 RT .. .. .. 50 .. VG 95328 J .. .. .. 851 06 RA .. .. .. 50 .. HE 301 B 06 RA .. .. .. 1A 851 36 RG .. .. .. 50 .. VG 95328 M .. .. .. 851 36 RA .. .. .. 50 .. 851 07 R .. .. .. 50 .. HE 301 B 07 R .. .. .. 1A * MS 3124 E .. .. .. VG 95328 D .. .. .. 851 07 RC .. .. .. 50 .. HE 301 B 07 RC .. .. .. 1A * MS 3124 F .. .. .. VG 95328 E .. .. .. 851 07 RP .. .. .. 50 .. HE 301 B 07 RP .. .. .. 1A * MS 3124 P .. .. .. 851 07 RT .. .. .. 50 .. VG 95328 S .. .. .. 851 07 RG .. .. .. 50 .. VG 95328 T .. .. .. 851 76 RU .. .. .. 50 .. 851 08 RC .. .. .. 50 .. HE 301 B 08 RC .. .. .. 1A 851 08 RP .. .. .. 50 .. HE 301 B 08 RP .. .. .. 1A Tableau comparatif / Cross refence list Version 851 avec contacts à sertir (protection vert olive) 851 Version with crimp contacts (olive green cadmium plating) Autres protections / Other plating Protections Plating SOURIAU NFC 93422 Version à souder (modèle HE 301B) Solder version Version à sertir Crimp version Anodique noire Black anodised 851 .. .. .. .. 5029 851 .. .. .. .. .. 50031 HE 301B .. .. .. .. .. 4A Nickelé Nickel 851 .. .. .. .. 5044 851 .. .. .. .. .. 5044 HE 301B .. .. .. .. .. 5A 8 851 Connecteurs avec raccords / Connectors with backshells SOURIAU NCF 93422 (modèle HE 301B) MIL-DTL-26482G série 1 VG 95328 851 00 E .. .. .. 50 .. HE 301 B 00 E .. .. .. 1A MS 3110 E .. .. .. 851 00 EC .. .. .. 50 .. HE 301 B 00 EC .. .. .. 1A MS 3110 F .. .. .. 851 00 AC .. .. .. 50 .. HE 301 B 00 AC .. .. .. 1A 851 00 P .. .. .. 50 .. HE 301 B 00 P .. .. .. 1A MS 3110 P .. .. .. 851 00 A .. .. .. 50 .. HE 301 B 00 A .. .. .. 1A 851 00 J .. .. .. 50 .. HE 301 B 00 J .. .. .. 1A 851 00 JC .. .. .. 50 .. MS 3110 J .. .. .. 851 01 E .. .. .. 50 .. HE 301 B 01 E .. .. .. 1A MS 3111 E .. .. .. 851 01 EC .. .. .. 50 .. HE 301 B 01 EC .. .. .. 1A MS 3111 F .. .. .. 851 01 AC .. .. .. 50 .. HE 301 B 01 AC .. .. .. 1A 851 01 P .. .. .. 50 .. HE 301 B 01 P .. .. .. 1A MS 3111 P .. .. .. 851 01 A .. .. .. 50 .. HE 301 B 01 A .. .. .. 1A 851 01 J .. .. .. 50 .. HE 301 B 01 J .. .. .. 1A 851 01 JC .. .. .. 50 .. MS 3111 J .. .. .. 851 02 E .. .. .. 50 .. HE 301 B 02 E .. .. .. 1A MS 3112 E .. .. .. VG 95328 H .. .. .. 851 06 E .. .. .. 50 .. HE 301 B 06 E .. .. .. 1A MS 3116 E .. .. .. 851 06 EC .. .. .. 50 .. HE 301 B 06 EC .. .. .. 1A MS 3116 F .. .. .. 851 06 AC .. .. .. 50 .. HE 301 B 06 AC .. .. .. 1A 851 06 P .. .. .. 50 .. HE 301 B 06 P .. .. .. 1A MS 3116 P .. .. .. 851 06 A .. .. .. 50 .. HE 301 B 06 A .. .. .. 1A 851 06 J .. .. .. 50 .. HE 301 B 06 J .. .. .. 1A 851 06 JC .. .. .. 50 .. MS 3116 J .. .. .. 851 08 EC .. .. .. 50 .. HE 301 B 08 EC .. .. .. 1A 851 08 P .. .. .. 50 .. HE 301 B 08 P .. .. .. 1A 851 07 E .. .. .. 50 .. HE 301 B 07 E .. .. .. 1A MS 3114 E .. .. .. 851 07 EC .. .. .. 50 .. HE 301 B 07 EC .. .. .. 1A MS 3114 F .. .. .. 851 07 AC .. .. .. 50 .. HE 301 B 07 AC .. .. .. 1A 851 07 P .. .. .. 50 .. HE 301 B 07 P .. .. .. 1A MS 3114 P .. .. .. 851 07 A .. .. .. 50 .. HE 301 B 07 A .. .. .. 1A Tableau comparatif / Cross refence list Version 851 avec contacts à souder (protection vert olive) 851 Version with solder contacts (olive green cadmium plating) Version 851 hermétique / 851 Hermetic version SOURIAU NFC 93422 (modèle HE 301B) MIL-DTL-26482G série 1 VG 95328 851 02 H .. .. P.50 HE 301 B 02 H .. .. P.3A 851 07 H .. .. P.50 HE 301 B 07 H .. .. P.3A * MS 3114 H .. .. .. P. VG 95328 F .. .. .. 851 I H .. .. P.50 HE 301 B 1 H .. .. P.3A * MS 3113 H .. .. .. P. VG 95328 G .. .. . * Non QPL - Not QPL 9 851 Caractéristiques techniques / Technical characteristics Tension de tenue • A pression normale : connecteurs accouplés et non accouplés - 1500 Veff entre contacts taille 20 (service 1) - 2300 Veff entre contacts taille 16 (service 2) - 1500 Veff entre contacts panachés de taille 16 et de taille 20 (service 1) • A basse pression 10 mbar : connecteurs accouplés et non accouplés - 200 Veff entre contacts taille 20 (service 1) - 300 Veff entre contacts taille 16 (service 2) Résistance d’isolement ≥ 5000 MΩ sous 500 Vcc Intensité admissible par contact Taille 20 = 7,5 A / Taille 16 = 13 A Résistance de contact • Version étanche : Taille 20 ≤ 4 mΩ / Taille 16 ≤ 3 mΩ • Version hermétique : Taille 20 ≤ 30 mΩ / Taille 16 ≤ 14 mΩ Blindage 70 dB à 5 MHz / 40 dB à 100 MHz Tension de claquage mini Breakdown voltage (mini) Electriques Boîtier • Version étanche : alliage d’aluminium - Protection : - cadmié vert olive - oxydation anodique noire - cadmium incolore - nickelé satiné brillant - zinc cobalt (vert olive) - zinc nickel • Version hermétique : acier - Protection : - cadmié jaune irisé - nickelé Isolant • Partie avant : élastomère néoprène (dureté 85 shore) • Partie arrière (passe-fils) : élastomère néoprène (dureté 40 shore) Contact • A sertir : montable et démontable par l’arrière de l’isolant et retenu par clips métalliques, à souder et à picot non démontable, à connexion enroulée démontable et non démontable • Matière : alliage cuivreux • Protection : or ou or sur parties actives et étain/plomb sur parties raccordement • Effort mini de rétention des contacts dans l’isolant • Endurance mécanique : 500 cycles complets (verrouillage et déverrouillage) Vibration Selon NFC 20-616 Mécaniques Shell • Environmental version : aluminium alloy - Plating : - olive green cadmium - black anodised - white cadmium - satin finish bright nickel - zinc cobalt (olive green) - zinc nickel • Hermetic version : steel - Plating : - iridescent yellow cadmium - nickel Isolant • Front section : neoprene elastomer (85 shore) • Rear section : neoprene elastomer (40 shore) Contact • Crimp : inserted and removed from rear of insulator retained by metallic clips, solder Mechanical Taille des contacts A sertir à clip A souder A picot A wrapper 20 (Ø1mm) ≥ 68 N ≥ 68 N 16 (Ø1.6mm) ≥ 113 N ≥ 113 N Contact size Crimp Solder PC tail Wire wrap 20 (Ø1mm) ≥ 68 N ≥ 68 N 16 (Ø1.6mm) ≥ 113 N ≥ 113 N Working temperature -55°C to +125°C Sealing • Crimp contact version, 1 bar differential pressure, leakage ≤ 8 cm3/hr • Solder contact version, 2 bar differential pressure, leakage ≤ 16 cm3/hr Hermiticity • 1 bar differential pressure, leakage ≤ 2.8 mm3/hr Chemical resistance : to MIL-DTL-26482G series 1 and NFC 93422 - HE 301 B code A Resistance to salt spray • 48 hours at environmental temperature Damp heat : 21 days Climatic • Mechanical endurance : 500 cycles (full mating-unmating) Vibration To NFC 20-616 Dielectric withstanding voltage • At standard pressure : mated and unmated connectors - 1500 Vrms between size 20 contacts (service 1) - 2300 Vrms between size 16 contacts (service 2) - 1500 Vrms between mixed size 20 and 16 contacts (service 1) • At reduced pressure 10 mbar : connectors mated and unmated - 200 Vrms between size 20 contacts (service1) - 300 Vrms between size 16 contacts (service2) Insulation resistance ≥ 5000 MΩ under 500 Vcc Current rating per contact Size 20 = 7.5 A / Size 16 = 13 A Contact resistance • Environmental version : Size 20 ≤ 4 mΩ / Size 16 ≤ 3 mΩ • Hermetic version : Size 20 ≤ 30 mΩ / Size 16 ≤ 14 mΩ Shielding 70 dB to 5 MHz / 40 dB to 100 MHz Température d’utilisation -55°C à +125°C Etanchéité • Version contact à sertir sous pression différentielle de 1 bar, fuite ≤ 8 cm3/heure • Version contact à souder sous pression différentielle de 2 bars, fuite ≤ 16 cm3/heure Herméticité • Sous pression différentielle de 1 bar, fuite ≤ 2,8 mm3/heure Tenue aux agents chimiques : suivant norme MIL-DTL-26482G série 1 et NFC 93422 - HE 301 B code A Résistance au brouillard salin • 48 heures, à température ambiante Chaleur humide : 21 jours Climatiques and PC tail, non removable, wire-wrap removable or not removable • Material : copper alloy • Plating : gold overall or gold plated active zone and tin/lead plated termination • Min retention force of contacts in insulator Electrical 10 851 Contacts à sertir / Crimp contacts Type de contact / Contact type Taille de contact Contact size Références Part numbers Câble admissible Cable acceptance Ø extérieur sur gaine Ø over insulation Section (mm²) Jauge Gauge AWG min. max. standards standard mâle male pour arrangements 8-2, 8-3, 8-4 & 12-14 for layouts 8-2, 8-3, 8-4 & 12-14 20 8500-9573* 0.21 à/to 0.93 24 à/to 18 1.20 2.11 femelle female 8500-9213 900* mâle male autre arrangement for further contact layout 8500-697 femelle female 8500-1758A 900 mâle male 16 8500-1300 0.93 à/to 1.91 18 à/to 14 1.60 2.80 femelle female 8500-9331 900 embout réducteur reducing sleeve 20 8500-781 B1 0.06 à/to 0.21 30 à/to 24 16 8500-1985 B1 0.60 20 thermocouple thermocouple chromel mâle male 20 8500-809 A 0.21 à/to 0.93 24 à/to 18 1.20 2.11 alumel 8500-812 A chromel femelle female 8500-2054 900 alumel 8500-2055 900 chromel mâle male 16 8500-1053 0.93 à/to 1.91 18 à/to 14 1.60 2.80 alumel 8500-1058 chromel femelle female 8500-1054 900 alumel 8500-1059 900 Contacts Contacts pour connexions enroulées / Wire-wrap contacts Type de contact Contact type Taille de contact Contact size Références Part numbers Diagonales Diagonals Jauge Gauge (AWG) Nombre d’enroulements Number of wraps mâle male 20 8500-4220 MQ 0.78 0.85 26 28 30 3 femelle female 8500-9351 900 0.78 0.85 26 28 30 3 mâle male 16 8500-4304 LY 1.55 1.70 20 22 24 26 3 femelle female 8500-4305 900 1.55 1.70 20 22 24 26 3 * Ne pas utiliser avec embout réducteur / Not to be used with reducing sleeve 11 851 Racine / Basic series Version à souder / Solder version Version à sertir / Crimp version 851 851 00 00 E R 8 8 3A 3A P P - - 50 50 - - - - - - Type de boîtier / Shell type à souder à sertir solder crimp 00 00 01 01 02E 02R 07 07 07A 06 06 08 08 36 36 76 76 Type de raccord / Backshell type Voir tableau page 12 - See table page 12 Taille de boîtier / Shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Arrangements / Contact layouts Voir tableau page 14/15 - See table page 14/15 Type de contact / Contact type P = mâle/male - S = femelle/female Positionnement / Orientation Normal (n’apparaît pas dans la référence) w, x, y, z - voir tableau page 16 Normal (not included in part number) w, x, y, z - see table page 16 Indice obligatoire / Obligatory suffix B 50 51 52 54 Spécification / Specification sans spécification: protection cadmiée vert olive / without specification: olive green cadmium plating 29 031 44 38 42 66 Q7 R3 G4 Références / Ordering Information Connecteurs étanches / Environmental connectors embase à collerette carrée avec possibilité de raccord square flange receptacle accepting backshells prolongateur / cable connecting receptacle embase à collerette carrée sans possibilité de raccord square flange receptacle not accepting backshells embase à fixation par écrou avec possibilité de raccord jam nut receptacle accepting backshells embase à fixation par écrou sans possibilité de raccord jam nut receptacle not accepting backshells fiche droite sans bague de blindage plug for use with straight backshells fiche avec raccord coudé sans bague de blindage plug for use with 90° backshells fiche droite avec bague de blindage screened plug for use with straight backshells fiche droite avec bague de blindage et doigt de verrouillage screened plug with lock finger version à sertir sans clip avec arrangements 8-2 / 8-3 / 8-4 / 12-14 crimped version without clip which used layouts 8-2 / 8-3 / 8-4 / 12-14 contacts à sertir: dorés, toutes tailles / crimp contacts: gold plated, all sizes contacts à souder: taille 20, contacts dorés en partie active + étamés en partie arrière sauf arrangements 8-2, 8-3, 8-4 &12-14; taille 16, contacts dorés; mixte taille 20 & 16, contacts dorés / Solder contacts: size 20, contacts with gold plated active zone + tin plated termination area except layouts 8-2, 8-3, 8-4 &12-14; size 16, gold plated contacts all over; Mix size 20 & 16, gold plated contacts all over contacts à souder taille 20: dorés / solder contacts gold plated size 20 protection zinc cobalt vert olive (contacts: idem spécif.50) / zinc cobalt olive green plated (contacts idem specif.50) protection zinc nickel noir (contacts: idem spécif.50) / black zinc nickel plating (contacts idem specif.50) protection oxydation anodique noire (version à souder) / black anodised (solder version) protection oxydation anodique noire (version à sertir) / black anodised (crimp version) protection nickelée / nickel plating protection nickelée / nickel plating protection cadmiée vert olive / olive green cadmium plating version à sertir: livrée sans raccord, ni bague conique /crimp version: delivered without backshell, nor conical ring version à souder: idem version à sertir + sans grommet / solder version: idem crimp version + no grommet protection cadmiée vert olive, 500 heures brouillard salin - versions à sertir et à souder / olive green cadmium plating, salt spray 500 hr - crimp and solder versions protection cadmiée vert olive, 500 heures brouillard salin - versions à picots / olive green cadmium plating, salt spray 500 hr - PC tail version version à sertir: protection nickelée, livrée sans raccord, ni bague conique / crimp version: nickel plating, delivered without backshell, nor conical ring version à souder: idem version à sertir + sans grommet / solder version: idem crimp version + no grommet ]Pour raccord à reprise de tresse T* & RT* Backshell for screen termination, type T* & RT* 12 851 Types de raccord / Backshell types - Embases sans possibilité de raccord - 02E/02R/07A - voir page 25 - Receptacle not accepting backshells - 02E/02R/07A - see page 25 à souder solder à sertir crimp à souder solder à sertir crimp 00 01 07 06 08 36 76 00 01 07 06 08 36 76 E R raccord simple backnut 17 26 22 31 - - - 17 26 22 31 - - - EC RC raccord droit à serre-câbles straight cable clamp 17 26 22 31 - - - 17 26 22 31 - - - EC RC raccord coudé à serre-câbles 90° cable clamp - - - - 35 - - - - - - 35 - - AC raccord droit à serre-câbles sans passe-fils straight cable clamp without grommet 17 26 22 31 - - - - - - - - - - P RP raccord droit pour potting straight backshell for potting 18 27 23 32 - - - 18 27 23 32 - - - P RP raccord coudé pour potting 90° backshell for potting - - - - 35 - - - - - - 35 - - A RA raccord droit intermédiaire straight adaptor 18 27 - 32 - 36 - 18 27 - 32 - 36 - T RT raccord droit pour gaine thermorétractable straight backshell for heatshrink sleeving 19 28 23 33 - - - 19 28 23 33 - - - M RM raccord droit démontable pour gaine thermorétractable straight removable backshell for heatshrink sleeving 19 28 - 33 - - - 19 28 - 33 - - - *T *RT raccord droit démontable pour reprise de tresse et gaine thermorétractable straight removable backshell for screen termination and heatshrink sleeving Pour spécif. 38 & 42 / for specif. 38 & 42 20 29 24 - - 36 - 20 29 24 - - 36 - G RG raccord droit démontable pour reprise de tresse et gaine thermorétractable straight removable backshell for screen termination and heatshrink sleeving 20 29 24 - - 37 - 20 29 24 - - 37 - J raccord droit à presse-étoupe straight backshell with sealing gland 21 30 - 34 - - - - - - - - - - JC raccord droit à presse-étoupe et serrecâbles straight backshell with sealing gland and cable clamp 21 30 - 34 - - - - - - - - - - U RU raccord droit court pour reprise de tresse et gaine thermorétractable short backshell for screen termination and heatshrink sleeving - - - - - - 38 - - - - - - 38 Z RZ raccord droit intermédiaire pour adaptation de raccord au pas électrique straight adaptor for electrical pich access - - - 37 - - - - - - 37 - - - 13 851 Références / Ordering Information Connecteurs hermétiques / Hermetic connectors Racine / Basic series 851 02H 8 3A P - 50 - - Type de boîtier / Shell type 02H 07H IH Taille de boîtier / Shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Arrangements / Contact layouts Voir tableau page 14/15 - See table page 14/15 Type de contact / Contact type P = mâle uniquement / male only Positionnement / Orientation normal (n’apparaît pas dans la référence) w, x, y, z - voir tableau page 16 normal (not included in part number) w, x, y, z - see table page 16 Indice obligatoire / Obligatory suffix 50 Spécification / Specification sans spécification: 02H et 07H, protection cadmiée jaune / without specification: 02H and 07H, yellow cadmium plating sans spécification: IH, protection nickelée / IH, nickel 44 02H et 07H, protection nickelée / 02H and 07H, nickel Connecteurs à picots & connexions enroulées / PC tail & wire-wrap connectors Racine / Basic series 851 02E 8 3A P - 50 16 Type de boîtier / Shell type 02E 07A Taille de boîtier / Shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Arrangements / Contact layouts Voir tableau page 14/15 - See table page 14/15 Type de contact / Contact type P = mâle/male - S = femelle/female Positionnement / Orientation normal (n’apparaît pas dans la référence) w, x, y, z - voir tableau page 16 normal (not included in part number) w, x, y, z - see table page 16 Indice obligatoire / Obligatory suffix 50 51 52 54 Spécification obligatoire / Obligatory specification à picot droit à picot droit pour connexion enroulée PC tail à picot droit wire-wrap embase à collerette carrée / square flange receptacle embase à fixation par écrou / jam nut receptacle embase à collerette ronde fixation par brasage / solder fixing receptacle Contacts #20 et # 16: dorés Gold plating for size 20 and size 16 embase à collerette carrée sans possibilité de raccord square flange receptacle not accepting backshell embase à fixation par écrou sans possibilité de raccord jam nut receptacle not accepting backshell contacts à picots: taille 20, contacts dorés en partie active + étamés en partie arrière sauf arrangements 8-2, 8-3, 8-4 & 12-14; Taille 16, contacts dorés; Mixte taille 20 & 16, contacts dorés / PC tail contacts: size 20, contacts with gold plated active zone + tin plated termination area except 8-2, 8-3, 8-4 & 12-14 layouts; Size 16, gold plated contacts all over; Mix size 20 & 16, gold plated contacts all over contacts à picots taille 20: dorés / gold plating for PC tail contacts size 20 protection zinc cobalt vert olive (contacts: idem spécif.50) / zinc cobalt olive green plated (contacts idem specif.50) protection zinc nickel noir (contacts: idem spécif.50) / black zinc nickel plating (contacts idem specif.50) 16: corps cadmié vert olive 45: corps nickelé 34: contacts démontables, corps cadmié vert olive (voir tableau page 10) 34A: contacts non démontables, corps cadmié vert olive 16: olive green cadmium plated body 45: nickel plating 34: non-banded contacts, olive green cadmium plated shell (see table, page 10) 34A: banded contacts, olive green cadmium plated - Ø 1 mm contact, Ø 0.6 mm terminal / Ø 1.6 mm contact, Ø 1 mm terminal - Ø 1 mm contact, Ø 0.6 mm terminal / Ø 1.6 mm contact, Ø 1 mm terminal - contact Ø 1 mm, picot de Ø 0.6 mm / contact Ø 1.6 mm, picot de Ø 1 mm - contact Ø 1 mm, picot de Ø 0.6 mm / contact Ø 1.6 mm, picot de Ø 1 mm 14 851 Arrangements / Contact layouts Vue de face avant isolant mâle / Viewed from front face of male insulator 2 2 Ø 1 (#20) 3 3 Ø 1 (#20) 3A/98 3 Ø 1 (#20) 4 4 Ø 1 (#20) 33 3 Ø 1 (#20) 6 6 Ø 1 (#20) 7 7 Ø 1 (#20) 98 6 Ø 1 (#20) 12 3 3 Ø 1.6 (#16) 8 8 Ø 1 (#20) 10 10 Ø 1 (#20) 14 14 Ø 1 (#20) 2 2 Ø 1.6 (#16) 14 12 8 Ø 1 (#20) 4 Ø 1.6 (#16) 15 14 Ø 1 (#20) 1 Ø 1.6 (#16) 18 18 Ø 1 (#20) 19 19 Ø 1 (#20) 5 5 Ø 1.6 (#16) 16 8 8 Ø 1.6 (#16) 23 22 Ø 1 (#20) 1 Ø 1.6 (#16) 26 26 Ø 1 (#20) 18 11 11 Ø 1.6 (#16) 32 32 Ø 1 (#20) 30 29 Ø 1 (#20) 1 Ø 1.6 (#16) ■ ▲ ♦ ○ ■▲ ♦ ○ ■ ▲ ● ♦ ○ ■ ▲ ● ♦ ○ ■ ▲ ● ♦ ○ ■ ▲ ● ♦ ○ □ ♦ ○ ■ ▲ ♦ ○ ■ ▲ ● ♦ ○ ■ ▲ ● ♦ ○ □ ♦ ■ ▲ ● ♦ ○ □▲ ♦ ■ ▲ ● ♦ ○ ■ ▲ ● ♦ ○ ■ ▲ ♦ ○ ■ ▲ ♦ ○ ■ ▲ ● ♦ ○ ■ ▲ ● ♦ ○ ■ ▲ ♦ ○ ■ ▲ ● ♦ ○ ■ ▲ ♦ ○ ■ ▲ ● ♦ ○ ■ + ▲ ♦ ○ 8 10 15 851 20 16 16 Ø 1.6 (#16) 39 37 Ø 1 (#20) 2 Ø 1.6 (#1.6) 41 41 Ø 1 (#20) 24 24 Ø 1 (#20) 25 25 Ø 1 (#20) 22 36 36 Ø 1 (#20) 55 55 Ø 1 (#20) 32 32 Ø 1 (#20) 34 34 Ø 1 (#20) 21 21 Ø 1.6 (#16) 24 61 61 Ø 1 (#20) 27 27 Ø 1 (#20) Arrangements contacts à souder (QPL) / Solder contact layouts (QPL) Arrangements contacts à souder / Solder contact layouts Arrangements contacts à souder sans possibilité de passe-fils / Solder contact layouts without grommet Arrangements contacts à sertir / Crimp contact layouts Arrangements version hermétique / Hermetic version contact layouts Arrangements contacts à picots / PC tail contact layouts Arrangements contacts pour connexions enroulées / Wire-wrap contact layouts ■ □ + ▲ ● ♦ ○ ■ ▲ ♦ ○ ■ ▲ ♦ ○ □ + ▲ ♦ ○ ■ + ▲ ♦ ○ ■ ▲ ♦ ○ ■ ▲ ● ♦ ■ ▲ ♦ ○ ■ + ▲ ♦ ○ ■ ▲ ♦ ○ □ ▲ ♦ ○ ■ ▲ ● ♦ ○ ■ ▲ ● ♦ ○ Autres arrangements, nous consulter / Other layouts, please consult us 16 851 Positionnements / Orientations Isolant tournant à l’intérieur du corps métallique Insulator rotated inside metal body Vue face avant isolant mâle (corps d’embase ou corps de fiche) Viewed from front face of male insulator (receptacle or plug) boîtiers shells arrangements layouts angles en degrés / angle in degrees NFC 93422 HE 301B MIL-DTL-26482G serie 1 service1 1500 Veff 1500 Vrms service 2 2300 Veff W X Y Z 2300 Vrms souder solder sertir crimp souder solder sertir crimp 8 2 58 122 - - • X 3 60 210 - - • X 3A (98)* 60 210 - - • • X 4 45 - - - • X 33 90 - - - • • • X 10 6 90 - - - • • • • X 7* 90 - - - X 98 90 180 240 270 • • X 12 3 - - 180 - • • • • X 8 90 112 203 292 • • X 10 60 155 270 295 • • • • X 2 - - - - X 14* 45 • X 14 5 40 92 184 273 • • • • X 12 43 90 - - • • • • X 15 17 110 155 234 • • • • X 18 15 90 180 270 • • X 19 30 165 315 - • • • • X 16 8 54 152 180 331 • • • • X 23 158 270 - - • • • • X 26 60 - 275 338 • • • • X 18 11 62 119 241 340 • • • • X 32 85 138 222 265 • • • • X 30 180 193 285 350 • • X 20 16 238 318 333 347 • • • • X 39 63 144 252 333 • • • • X 41 45 126 225 - • • • • X 24 70 145 215 290 • • X 25 72 144 216 288 X 27 72 144 216 288 • • X 22 21 16 135 175 349 • • • • X 36 72 144 216 288 • X 55 30 142 226 314 • • • • X 32 72 145 215 288 • X 34 62 142 218 298 • X 24 61 90 180 270 324 • • • • X * Arrangement 8-98 : positionnements W et X non normalisés / 8-98 layout, W and X non standard ortientations Arrangements 10-7 & 12-14 : positionnement W non normalisé / 10-7 & 12-14 layouts, W non standard orientation 17 851 Embase à collerette carrée avec raccord simple Square flange receptacle with backnut Encombrements / Dimensions Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max contacts à souder J solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 00 E 8.. . 50.. 851 00 R 8.. . 50.. 32.70 32.00 12.03 11.70 1.32 13.50 15.09 20.99 3.13 10 851 00 E 10.. . 50.. 851 00 R 10.. . 50.. 32.70 32.00 15.01 11.70 1.32 16.70 18.26 24.19 3.13 12 851 00 E 12.. . 50.. 851 00 R 12.. . 50.. 32.70 32.00 19.07 11.70 1.32 19.90 20.62 26.54 3.13 14 851 00 E 14.. . 50.. 851 00 R 14.. . 50.. 32.70 32.00 22.25 11.70 1.32 23.40 23.00 28.89 3.13 16 851 00 E 16.. . 50.. 851 00 R 16.. . 50.. 32.70 32.00 25.42 11.70 1.32 26.60 24.61 31.29 3.13 18 851 00 E 18.. . 50.. 851 00 R 18.. . 50.. 32.70 32.00 28.60 11.70 1.32 29.50 26.97 33.69 3.13 20 851 00 E 20.. . 50.. 851 00 R 20.. . 50.. 34.50 33.40 31.77 14.35 2.15 32.70 29.36 36.89 3.13 22 851 00 E 22.. . 50.. 851 00 R 22.. . 50.. 34.50 33.40 34.95 14.35 2.15 36.00 31.75 39.99 3.13 24 851 00 E 24.. . 50.. 851 00 R 24.. . 50.. 34.50 33.40 38.12 15.20 2.15 39.10 34.92 43.15 3.81 00 E HE 301 B 00 E MS 3110 E 00 R HE 301 B 00 R MS 3120 E VG 95328 A PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Embase à collerette carrée avec raccord droit à serre-câbles Square flange receptacle with straight cable clamp Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max contacts à souder G J solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 00 8.. . 50.. 851 00 RC 8.. . 50 .. 48.00 47.30 12.03 11.70 1.32 19.90 15.09 20.99 3.50 3.13 10 851 00 10.. . 50.. 851 00 RC 10.. . 50.. 48.00 47.30 15.01 11.70 1.32 21.50 18.26 24.19 5.00 3.13 12 851 00 12.. . 50.. 851 00 RC 12.. . 50.. 48.00 47.30 19.07 11.70 1.32 25.00 20.62 26.54 8.20 3.13 14 851 00 14.. . 50.. 851 00 RC 14.. . 50.. 48.00 47.30 22.25 11.70 1.32 27.80 23.00 28.89 10.00 3.13 16 851 00 16.. . 50.. 851 00 RC 16.. . 50.. 51.00 50.50 25.42 11.70 1.32 29.40 24.61 31.29 13.00 3.13 18 851 00 18.. . 50.. 851 00 RC 18.. . 50.. 51.00 50.50 28.60 11.70 1.32 35.30 26.97 33.69 16.00 3.13 20 851 00 20.. . 50.. 851 00 RC 20.. . 50.. 53.00 51.50 31.77 14.35 2.15 35.30 29.36 36.89 16.00 3.13 22 851 00 22.. . 50.. 851 00 RC 22.. . 50.. 53.00 51.50 34.95 14.35 2.15 41.10 31.75 39.99 19.30 3.13 24 851 00 24.. . 50.. 851 00 RC 24.. . 50.. 53.00 51.50 38.12 15.20 2.15 42.40 34.92 43.15 20.60 3.81 00 EC HE 301 B 00 EC MS 3110 F 00 AC HE 301 B 00 AC 00 RC HE 301 B 00 RC MS 3120 F VG 95328 B PS PS PS PS PS PS PS PS PS EC AC EC AC EC AC EC AC EC AC EC AC EC AC EC AC EC AC PS PS PS PS PS PS PS PS PS Note : toutes les dimensions sont en mm / all dimensions are in mm 18 851 Embase à collerette carrée avec raccord droit pour potting Square flange receptacle with straight backshell for potting 00 P HE 301 B 00 P MS 3110 P 00 RP HE 301 B 00 RP MS 3120 P Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max G max contacts à souder J solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 00 P 8.. . 50.. 851 00 RP 8.. . 50 .. 36.20 41.70 12.03 11.70 1.32 15.34 15.09 20.99 10.46 3.13 10 851 00 P 10.. . 50.. 851 00 RP 10.. . 50.. 36.20 41.70 15.01 11.70 1.32 17.70 18.26 24.19 13.55 3.13 12 851 00 P 12.. . 50.. 851 00 RP 12.. . 50.. 36.20 41.70 19.07 11.70 1.32 21.69 20.62 26.54 13.96 3.13 14 851 00 P 14.. . 50.. 851 00 RP 14.. . 50.. 36.20 41.70 22.25 11.70 1.32 23.90 23.00 28.89 17.42 3.13 16 851 00 P 16.. . 50.. 851 00 RP 16.. . 50.. 36.20 41.70 25.42 11.70 1.32 27.00 24.61 31.29 20.56 3.13 18 851 00 P 18.. . 50.. 851 00 RP 18.. . 50.. 36.91 44.46 28.60 11.70 1.32 30.50 26.97 33.69 23.66 3.13 20 851 00 P 20.. . 50.. 851 00 RP 20.. . 50.. 43.80 50.93 31.77 14.35 2.15 33.65 29.36 36.89 23.92 3.13 22 851 00 P 22.. . 50.. 851 00 RP 22.. . 50.. 43.80 50.93 34.95 14.35 2.15 37.10 31.75 39.99 25.52 3.13 24 851 00 P 24.. . 50.. 851 00 RP 24.. . 50.. 43.80 51.40 38.12 15.20 2.15 40.00 34.92 43.15 32.00 3.81 PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Embase à collerette carrée avec raccord droit intermédiaire Square flange receptacle with straight adaptor 00 A HE 301 B 00 A 00 RA HE 301 B 00 RA Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max G max J K filetage threading UNEF 2A contacts à souder solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 00 A 8.. . 50.. 851 00 RA 8.. . 50 .. 41.00 12.03 11.70 1.32 14.50 15.09 20.99 9.10 3.13 1/2 18 10 851 00 A 10.. . 50.. 851 00 RA 10.. . 50.. 41.00 15.01 11.70 1.32 18.70 18.26 24.19 12.08 3.13 5/8 24 12 851 00 A 12.. . 50.. 851 00 RA 12.. . 50.. 41.00 19.07 11.70 1.32 21.70 20.62 26.54 15.25 3.13 3/4 20 14 851 00 A 14.. . 50.. 851 00 RA 14.. . 50.. 41.00 22.25 11.70 1.32 25.10 23.00 28.89 18.15 3.13 7/8 20 16 851 00 A 16.. . 50.. 851 00 RA 16.. . 50.. 41.00 25.42 11.70 1.32 28.13 24.61 31.29 21.32 3.13 1-20 18 851 00 A 18.. . 50.. 851 00 RA 18.. . 50.. 41.00 28.60 11.70 1.32 31.38 26.97 33.69 24.32 3.13 1-3/16 18 20 851 00 A 20.. . 50.. 851 00 RA 20.. . 50.. 44.00 31.77 14.35 2.15 34.30 29.36 36.89 26.73 3.13 1-3/16 18 22 851 00 A 22.. . 50.. 851 00 RA 22.. . 50.. 44.00 34.95 14.35 2.15 37.60 31.75 39.99 30.67 3.13 1-7/16 18 24 851 00 A 24.. . 50.. 851 00 RA 24.. . 50.. 44.00 38.12 15.20 2.15 40.70 34.92 43.15 33.08 3.81 1-7/16 18 PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Note : toutes les dimensions sont en mm / all dimensions are in mm 19 851 Embase à collerette carrée avec raccord pour gaine thermorétractable Square flange receptacle with straight backshell for heatshrink sleeving 00 T 00 RT PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Embase à collerette carrée avec raccord droit démontable pour gaine thermorétractable Square flange receptacle with removable straight backshell for heatshrink sleeving PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max G max J M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp souder solder sertir crimp 8 851 00 T 8.. . 50.. 851 00 RT 8.. . 50 .. 36.70 36.00 12.03 11.70 1.32 15.35 15.09 20.99 7.20 6.70 3.13 3.70 10 851 00 T 10.. . 50.. 851 00 RT 10.. . 50.. 36.70 36.00 15.01 11.70 1.32 18.15 18.26 24.19 10.20 9.40 3.13 3.70 12 851 00 T 12.. . 50.. 851 00 RT 12.. . 50.. 36.70 36.00 19.07 11.70 1.32 23.45 20.62 26.54 13.20 11.95 3.13 3.70 14 851 00 T 14.. . 50.. 851 00 RT 14.. . 50.. 36.70 36.00 22.25 11.70 1.32 24.25 23.00 28.89 16.10 15.15 3.13 3.70 16 851 00 T 16.. . 50.. 851 00 RT 16.. . 50.. 39.00 38.30 25.42 11.70 1.32 29.55 24.61 31.29 19.25 18.05 3.13 3.70 18 851 00 T 18.. . 50.. 851 00 RT 18.. . 50.. 39.00 38.30 28.60 11.70 1.32 31.75 26.97 33.69 21.30 19.95 3.13 3.70 20 851 00 T 20.. . 50.. 851 00 RT 20.. . 50.. 45.30 44.20 31.77 14.35 2.15 35.85 29.36 36.89 24.40 23.05 3.13 3.70 22 851 00 T 22.. . 50.. 851 00 RT 22.. . 50.. 45.30 44.20 34.95 14.35 2.15 38.20 31.75 39.99 27.50 25.55 3.13 3.70 24 851 00 T 24.. . 50.. 851 00 RT 24.. . 50.. 44.00 42.60 38.12 15.20 2.15 41.30 34.92 43.15 30.60 28.65 3.81 3.70 00 M 00 RM Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max G max J M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 00 M 8.. . 50.. 851 00 RM 8.. . 50 .. 50.00 12.03 11.70 1.32 13.55 15.09 20.99 7.05 3.13 3.50 10 851 00 M 10.. . 50.. 851 00 RM 10.. . 50.. 50.00 15.01 11.70 1.32 15.35 18.26 24.19 9.90 3.13 3.50 12 851 00 M 12.. . 50.. 851 00 RM 12.. . 50.. 50.00 19.07 11.70 1.32 19.48 20.62 26.54 12.60 3.13 3.50 14 851 00 M 14.. . 50.. 851 00 RM 14.. . 50.. 50.00 22.25 11.70 1.32 21.30 23.00 28.89 15.90 3.13 3.50 16 851 00 M 16.. . 50.. 851 00 RM 16.. . 50.. 50.00 25.42 11.70 1.32 24.50 24.61 31.29 18.95 3.13 3.50 18 851 00 M 18.. . 50.. 851 00 RM 18.. . 50.. 50.00 28.60 11.70 1.32 26.45 26.97 33.69 20.90 3.13 3.50 20 851 00 M 20.. . 50.. 851 00 RM 20.. . 50.. 53.30 31.77 14.35 2.15 30.73 29.36 36.89 23.70 3.13 3.50 22 851 00 M 22.. . 50.. 851 00 RM 22.. . 50.. 53.30 34.95 14.35 2.15 34.24 31.75 39.99 26.60 3.13 3.50 24 851 00 M 24.. . 50.. 851 00 RM 24.. . 50.. 53.30 38.12 15.20 2.15 36.47 34.92 43.15 29.30 3.81 3.50 PS PS PS PS PS PS PS PS PS Note : toutes les dimensions sont en mm / all dimensions are in mm 20 851 Embase à collerette carrée avec raccord droit démontable pour reprise de tresse et gaine thermorétractable (spécifications 38 & 42) / Square flange receptacle with removable backshell for screen termination and heatshrink sleeving (38 & 42 suffix) 00 T 00 RT Embase à collerette carrée avec raccord droit démontable pour reprise de tresse et gaine thermorétractable / Square flange receptacle with removable straight backshell for screen termination and heatshrink sleeving 00 G 00 RG VG 95328 R Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max G max J M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 00 G 8.. .50.. 851 00 RG 8.. .50 .. 54.00 12.03 11.70 1.32 16.30 15.09 20.99 7.45 3.13 3.60 10 851 00 G 10.. .50.. 851 00 RG 10.. .50.. 54.00 15.01 11.70 1.32 18.30 18.26 24.19 10.30 3.13 3.60 12 851 00 G 12.. .50.. 851 00 RG 12.. .50.. 54.00 19.07 11.70 1.32 22.30 20.62 26.54 13.20 3.13 3.60 14 851 00 G 14.. .50.. 851 00 RG 14.. .50.. 54.00 22.25 11.70 1.32 25.30 23.00 28.89 16.50 3.13 3.60 16 851 00 G 16.. .50.. 851 00 RG 16.. .50.. 54.00 25.42 11.70 1.32 28.30 24.61 31.29 19.35 3.13 3.60 18 851 00 G 18.. .50.. 851 00 RG 18.. .50.. 54.00 28.60 11.70 1.32 32.30 26.97 33.69 21.60 3.13 3.60 20 851 00 G 20.. .50.. 851 00 RG 20.. .50.. 59.30 31.77 14.35 2.15 34.30 29.36 36.89 24.80 3.13 3.60 22 851 00 G 22.. .50.. 851 00 RG 22.. .50.. 59.30 34.95 14.35 2.15 38.30 31.75 39.99 27.90 3.13 3.60 24 851 00 G 24.. .50.. 851 00 RG 24.. .50.. 59.30 38.12 15.20 2.15 41.30 34.92 43.15 31.00 3.81 3.60 PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max G max J M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 00 T 8.. . 50 851 00 RT 8.. . 50 51.60 12.03 11.70 1.32 18.25 15.09 20.99 7.45 3.13 3.70 10 851 00 T 10.. . 50 851 00 RT 10.. . 50 51.60 15.01 11.70 1.32 20.25 18.26 24.19 9.00 3.13 3.70 12 851 00 T 12.. . 50 851 00 RT 12.. . 50 51.60 19.07 11.70 1.32 24.75 20.62 26.54 13.30 3.13 3.70 14 851 00 T 14.. . 50 851 00 RT 14.. . 50 51.60 22.25 11.70 1.32 27.75 23.00 28.89 16.50 3.13 3.70 16 851 00 T 16.. . 50 851 00 RT 16.. . 50 51.60 25.42 11.70 1.32 30.05 24.61 31.29 18.50 3.13 3.70 18 851 00 T 18.. . 50 851 00 RT 18.. . 50 52.00 28.60 11.70 1.32 34.15 26.97 33.69 21.90 3.13 3.70 20 851 00 T 20.. . 50 851 00 RT 20.. . 50 55.10 31.77 14.35 2.15 37.25 29.36 36.89 25.10 3.13 3.70 22 851 00 T 22.. . 50 851 00 RT 22.. . 50 55.10 34.95 14.35 2.15 40.45 31.75 39.99 28.20 3.13 3.70 24 851 00 T 24.. . 50 851 00 RT 24.. . 50 55.10 38.12 15.20 2.15 43.65 34.92 43.15 31.40 3.81 3.70 PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 Note : toutes les dimensions sont en mm / all dimensions are in mm 21 851 Embase à collerette carrée avec raccord droit presse-étoupe Square flange receptacle with straight sealing gland backshell 00 J HE 301 B 00J Embase à collerette carrée avec raccord droit à presse-étoupe et serre-câbles Square flange receptacle with straight sealing gland and cable clamp PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max G contacts à souder J solder contacts contacts à sertir crimp contacts souder solder sertir crimp min max 8 851 00 J 8.. . 50.. - 47.60 - 12.03 11.70 1.32 14.40 15.09 20.99 5.02 5.84 3.13 10 851 00 J 10.. . 50.. - 47.60 - 15.01 11.70 1.32 17.60 18.26 24.19 5.94 6.76 3.13 12 851 00 J 12.. . 50.. - 48.70 - 19.07 11.70 1.32 21.10 20.62 26.54 9.34 10.16 3.13 14 851 00 J 14.. . 50.. - 53.50 - 22.25 11.70 1.32 24.40 23.00 28.89 11.32 12.14 3.13 16 851 00 J 16.. . 50.. - 59.00 - 25.42 11.70 1.32 27.60 24.61 31.29 14.73 15.55 3.13 18 851 00 J 18.. . 50.. - 65.00 - 28.60 11.70 1.32 30.80 26.97 33.69 16.00 16.82 3.13 20 851 00 J 20.. . 50.. - 79.10 - 31.77 14.35 2.15 34.10 29.36 36.89 16.89 17.70 3.13 22 851 00 J 22.. . 50.. - 80.00 - 34.95 14.35 2.15 37.30 31.75 39.99 17.78 18.60 3.13 24 851 00 J 24.. . 50.. - 90.00 - 38.12 15.20 2.15 40.50 34.92 43.15 20.34 21.16 3.81 PS PS PS PS PS PS PS PS PS 00 JC MS 3110 J Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max G contacts à souder J solder contacts contacts à sertir crimp contacts souder solder sertir crimp min max 8 851 00 JC 8.. .50.. - 57.68 - 12.03 11.70 1.32 19.90 15.09 20.99 5.02 5.84 3.13 10 851 00 JC 10.. .50.. - 57.68 - 15.01 11.70 1.32 21.50 18.26 24.19 5.94 6.76 3.13 12 851 00 JC 12.. .50.. - 61.24 - 19.07 11.70 1.32 25.00 20.62 26.54 9.34 10.16 3.13 14 851 00 JC 14.. .50.. - 66.01 - 22.25 11.70 1.32 27.80 23.00 28.89 11.32 12.14 3.13 16 851 00 JC 16.. .50.. - 74.75 - 25.42 11.70 1.32 29.40 24.61 31.29 14.73 15.55 3.13 18 851 00 JC 18.. .50.. - 80.57 - 28.60 11.70 1.32 35.30 26.97 33.69 16.00 16.82 3.13 20 851 00 JC 20.. .50.. - 91.69 - 31.77 14.35 2.15 35.30 29.36 36.89 16.89 17.70 3.13 22 851 00 JC 22.. .50.. - 95.66 - 34.95 14.35 2.15 41.10 31.75 39.99 17.78 18.60 3.13 24 851 00 JC 24.. .50.. - 101.22 - 38.12 15.20 2.15 42.40 34.92 43.15 20.34 21.16 3.81 Note : toutes les dimensions sont en mm / all dimensions are in mm 22 851 Embase à fixation par écrou avec raccord simple Jam nut receptacle with backnut 07 E HE 301 B 07 E MS 3114 E 07 R HE 301 B 07 R MS 3124 E VG 95328 D Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max P max S contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 07 E 8.. . 50.. 851 07 R 8.. . 50 .. 34.10 33.50 12.03 17.90 2.64 18.50 26.94 19.29 23.94 10 851 07 E 10.. . 50.. 851 07 R 10.. . 50.. 34.10 33.50 15.01 17.90 2.64 21.70 30.14 22.38 26.94 12 851 07 E 12.. . 50.. 851 07 R 12.. . 50.. 34.10 33.50 19.07 17.90 2.64 24.90 34.94 27.13 31.74 14 851 07 E 14.. . 50.. 851 07 R 14.. . 50.. 34.10 33.50 22.25 17.90 2.64 28.10 38.04 30.33 34.94 16 851 07 E 16.. . 50.. 851 07 R 16.. . 50.. 34.10 33.50 25.42 17.90 2.64 31.20 41.24 33.48 38.24 18 851 07 E 18.. . 50.. 851 07 R 18.. . 50.. 34.10 33.50 28.60 17.90 2.64 34.40 44.44 36.68 41.34 20 851 07 E 20.. . 50.. 851 07 R 20.. . 50.. 39.30 37.90 31.77 22.45 3.44 38.30 49.14 39.83 46.04 22 851 07 E 22.. . 50.. 851 07 R 22.. . 50.. 39.30 37.90 34.95 22.45 3.44 41.50 52.24 43.03 49.24 24 851 07 E 24.. . 50.. 851 07 R 24.. . 50.. 39.30 37.90 38.12 22.30 3.44 44.70 55.54 46.18 52.74 PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G P max S contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 07 8.. . 50.. 851 07 RC 8.. . 50 .. 49.31 49.10 12.03 17.90 2.64 19.90 26.94 3.50 19.29 23.94 10 851 07 10.. . 50.. 851 07 RC 10.. . 50.. 49.31 49.10 15.01 17.90 2.64 21.50 30.14 5.00 22.38 26.94 12 851 07 12.. . 50.. 851 07 RC 12.. . 50.. 49.17 49.10 19.07 17.90 2.64 25.00 34.94 8.20 27.13 31.74 14 851 07 14.. . 50.. 851 07 RC 14.. . 50.. 49.17 49.10 22.25 17.90 2.64 27.80 38.04 10.00 30.33 34.94 16 851 07 16.. . 50.. 851 07 RC 16.. . 50.. 52.34 52.20 25.42 17.90 2.64 29.40 41.24 13.00 33.48 38.24 18 851 07 18.. . 50.. 851 07 RC 18.. . 50.. 53.22 53.10 28.60 17.90 2.64 35.30 44.44 16.00 36.68 41.34 20 851 07 20.. . 50.. 851 07 RC 20.. . 50.. 58.10 58.00 31.77 22.45 3.44 35.30 49.14 16.00 39.83 46.04 22 851 07 22.. . 50.. 851 07 RC 22.. . 50.. 58.10 58.00 34.95 22.45 3.44 41.10 52.24 19.30 43.03 49.24 24 851 07 24.. . 50.. 851 07 RC 24.. . 50.. 58.10 58.00 38.12 23.30 3.44 42.40 55.54 20.60 46.18 52.74 PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS 07 EC HE 301 B 07 EC MS 3114 F 07 AC HE 301 B 07 AC 07 RC HE 301 B 07 RC MS 3124 F VG 95328 E EC AC EC AC EC AC EC AC EC AC EC AC EC AC EC AC EC AC Note : toutes les dimensions sont en mm / all dimensions are in mm Embase à fixation par écrou avec raccord droit à serre-câbles Jam nut receptacle with straight cable clamp 23 851 Embase à fixation par écrou avec raccord droit pour potting Jam nut receptacle with straight backshell for potting Embase à fixation par écrou avec raccord droit pour gaine thermorétractable Jam nut receptacle with straight backshell for heatshrink sleeving PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS 07 T 07 RT VG 95328 S 07 P HE 301 B 07 P MS 3114 P 07 RP HE 301 B 07 RP MS 3124 P Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G max P max S contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 07 P 8.. . 50.. 851 07 RP 8.. . 50 .. 34.30 39.80 12.03 17.90 2.64 15.34 26.94 10.46 19.29 23.94 10 851 07 P 10.. . 50.. 851 07 RP 10.. . 50.. 34.30 39.80 15.01 17.90 2.64 17.70 30.14 13.55 22.38 26.94 12 851 07 P 12.. . 50.. 851 07 RP 12.. . 50.. 34.30 39.80 19.07 17.90 2.64 21.69 34.94 13.96 27.13 31.74 14 851 07 P 14.. . 50.. 851 07 RP 14.. . 50.. 34.30 39.80 22.25 17.90 2.64 23.90 38.04 17.42 30.33 34.94 16 851 07 P 16.. . 50.. 851 07 RP 16.. . 50.. 34.30 39.80 25.42 17.90 2.64 27.00 41.24 20.56 33.48 38.24 18 851 07 P 18.. . 50.. 851 07 RP 18.. . 50.. 34.10 41.80 28.60 17.90 2.64 30.50 44.44 23.66 36.68 41.34 20 851 07 P 20.. . 50.. 851 07 RP 20.. . 50.. 42.25 49.92 31.77 22.45 3.44 33.65 49.14 23.92 39.83 46.04 22 851 07 P 22.. . 50.. 851 07 RP 22.. . 50.. 42.25 49.92 34.95 22.45 3.44 37.10 52.24 25.52 43.03 49.24 24 851 07 P 24.. . 50.. 851 07 RP 24.. . 50.. 43.26 51.30 38.12 23.30 3.44 40.00 55.54 32.00 46.18 52.74 PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G max M max P max S contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp souder solder sertir crimp 8 851 07 T 8.. . 50.. 851 07 RT 8.. . 50 .. 42.60 41.50 12.03 17.90 2.64 15.35 26.94 7.20 6.70 3.70 19.29 23.94 10 851 07 T 10.. . 50.. 851 07 RT 10.. . 50.. 42.60 41.50 15.01 17.90 2.64 18.15 30.14 10.20 9.40 3.70 22.38 26.94 12 851 07 T 12.. . 50.. 851 07 RT 12.. . 50.. 42.60 41.50 19.07 17.90 2.64 23.45 34.94 13.20 11.95 3.70 27.13 31.74 14 851 07 T 14.. . 50.. 851 07 RT 14.. . 50.. 42.60 41.50 22.25 17.90 2.64 24.25 38.04 16.10 15.15 3.70 30.33 34.94 16 851 07 T 16.. . 50.. 851 07 RT 16.. . 50.. 44.40 43.80 25.42 17.90 2.64 29.55 41.24 19.25 18.05 3.70 33.48 38.24 18 851 07 T 18.. . 50.. 851 07 RT 18.. . 50.. 44.40 43.80 28.60 17.90 2.64 31.75 44.44 21.30 19.95 3.70 36.68 41.24 20 851 07 T 20.. . 50.. 851 07 RT 20.. . 50.. 50.90 49.80 31.77 22.45 3.44 35.85 49.14 24.40 23.05 3.70 39.83 46.04 22 851 07 T 22.. . 50.. 851 07 RT 22.. . 50.. 50.90 49.80 34.95 22.45 3.44 38.20 52.24 27.50 25.55 3.70 43.03 49.24 24 851 07 T 24.. . 50.. 851 07 RT 24.. . 50.. 49.90 48.50 38.12 23.30 3.44 41.30 55.54 30.60 28.65 3.70 46.18 52.74 Note : toutes les dimensions sont en mm / all dimensions are in mm 24 851 07 T 07 RT PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Embase à fixation par écrou avec raccord droit démontable pour reprise de tresse et gaine thermorétractable (spécifications 38 & 42) / Jam nut receptacle with removable straight backshell for screen termination and heatshrink sleeving (38 & 42 suffix) Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G max M max P max S contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 07 T 8.. . 50 851 07 RT 8.. . 50 60.00 12.03 17.90 2.64 18.25 26.94 7.45 3.70 19.29 23.94 10 851 07 T 10.. . 50 851 07 RT 10.. . 50 60.00 15.01 17.90 2.64 20.25 30.14 9.00 3.70 22.38 26.94 12 851 07 T 12.. . 50 851 07 RT 12.. . 50 60.00 19.07 17.90 2.64 24.75 34.94 13.30 3.70 27.13 31.74 14 851 07 T 14.. . 50 851 07 RT 14.. . 50 60.00 22.25 17.90 2.64 27.75 38.04 16.50 3.70 30.33 34.94 16 851 07 T 16.. . 50 851 07 RT 16.. . 50 60.00 25.42 17.90 2.64 30.05 41.24 18.50 3.70 33.48 38.24 18 851 07 T 18.. . 50 851 07 RT 18.. . 50 60.40 28.60 17.90 2.64 34.15 44.44 21.90 3.70 36.68 41.34 20 851 07 T 20.. . 50 851 07 RT 20.. . 50 63.40 31.77 22.45 3.44 37.25 49.14 25.10 3.70 39.83 46.04 22 851 07 T 22.. . 50 851 07 RT 22.. . 50 63.40 34.95 22.45 3.44 40.45 52.24 28.20 3.70 43.03 49.24 24 851 07 T 24.. . 50 851 07 RT 24.. . 50 63.40 38.12 23.30 3.44 43.65 55.54 31.40 3.70 46.18 52.74 Embase à fixation par écrou avec raccord droit démontable pour reprise de tresse et gaine thermorétractable / Jam nut receptacle with removable straight backshell for screen termination and heatshrink sleeving 07 G 07 RG VG 95328 T 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G max M max P max S contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 07 G 8.. . 50 851 07 RG 8.. . 50 62.20 12.03 17.90 2.64 16.30 26.94 7.45 3.60 19.29 23.94 10 851 07 G 10.. . 50 851 07 RG 10.. . 50 62.20 15.01 17.90 2.64 18.30 30.14 10.30 3.60 22.38 26.94 12 851 07 G 12.. . 50 851 07 RG 12.. . 50 62.20 19.07 17.90 2.64 22.30 34.94 13.20 3.60 27.13 31.74 14 851 07 G 14.. . 50 851 07 RG 14.. . 50 62.40 22.25 17.90 2.64 25.30 38.04 16.50 3.60 30.33 34.94 16 851 07 G 16.. . 50 851 07 RG 16.. . 50 62.40 25.42 17.90 2.64 28.30 41.24 19.35 3.60 33.48 38.24 18 851 07 G 18.. . 50 851 07 RG 18.. . 50 62.40 28.60 17.90 2.64 32.30 44.44 21.60 3.60 36.68 41.34 20 851 07 G 20.. . 50 851 07 RG 20.. . 50 67.50 31.77 22.45 3.44 34.30 49.14 24.80 3.60 39.83 46.04 22 851 07 G 22.. . 50 851 07 RG 22.. . 50 67.50 34.95 22.45 3.44 38.30 52.24 27.90 3.60 43.03 49.24 24 851 07 G 24.. . 50 851 07 RG 24.. . 50 67.50 38.12 23.30 3.44 41.30 55.54 31.00 3.60 46.18 52.74 Note : toutes les dimensions sont en mm / all dimensions are in mm 25 851 Embase à collerette carrée sans possibilité de raccord Square flange receptacle not accepting backshell Embase à fixation par écrou sans possibilité de raccord Jam nut receptacle not accepting backshell PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS 07 A HE 301 B 07 A 02 E HE 301 B 02 E MS 3112 E VG 95328 H 02 R HE 301 B 02 R MS 3122 E VG 95328 C PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A B max C max D max E F max contacts à souder J solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 02 E 8.. . 50.. 851 02 R 8.. . 50 .. 25.18 32.35 12.03 11.70 1.32 10.84 15.09 20.99 3.13 10 851 02 E 10.. . 50.. 851 02 R 10.. . 50.. 25.10 32.35 15.01 11.70 1.32 13.99 18.26 24.19 3.13 12 851 02 E 12.. . 50.. 851 02 R 12.. . 50.. 25.10 32.35 19.07 11.70 1.32 17.37 20.62 26.54 3.13 14 851 02 E 14.. . 50.. 851 02 R 14.. . 50.. 25.10 32.35 22.25 11.70 1.32 20.57 23.00 28.89 3.13 16 851 02 E 16.. . 50.. 851 02 R 16.. . 50.. 25.10 32.35 25.42 11.70 1.32 23.72 24.61 31.29 3.13 18 851 02 E 18.. . 50.. 851 02 R 18.. . 50.. 25.10 32.35 28.60 11.70 1.32 26.69 26.97 33.69 3.13 20 851 02 E 20.. . 50.. 851 02 R 20.. . 50.. 26.67 33.95 31.77 14.35 2.15 29.89 29.36 36.89 3.13 22 851 02 E 22.. . 50.. 851 02 R 22.. . 50.. 26.67 33.95 34.95 14.35 2.15 33.04 31.75 39.99 3.13 24 851 02 E 24.. . 50.. 851 02 R 24.. . 50.. 26.67 33.95 38.12 15.20 2.15 36.24 34.92 43.15 3.81 Taille de boîtier Shell size Références / Part numbers L max A B max C max F max P max S contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 07 A 8.. . 50.. - 25.18 - 12.03 17.90 2.64 26.94 19.29 23.94 10 851 07 A 10.. . 50.. - 25.10 - 15.01 17.90 2.64 30.14 22.38 26.94 12 851 07 A 12.. . 50.. - 25.10 - 19.07 17.90 2.64 34.94 27.13 31.74 14 851 07 A 14.. . 50.. - 25.10 - 22.25 17.90 2.64 38.04 30.33 34.94 16 851 07 A 16.. . 50.. - 25.10 - 25.42 17.90 2.64 41.24 33.48 38.24 18 851 07 A 18.. . 50.. - 25.10 - 28.60 17.90 2.64 44.44 36.68 41.34 20 851 07 A 20.. . 50.. - 26.67 - 31.77 22.45 3.44 49.14 39.83 46.04 22 851 07 A 22.. . 50.. - 26.67 - 34.95 22.45 3.44 52.24 43.03 49.24 24 851 07 A 24.. . 50.. - 26.67 - 38.12 23.30 3.44 55.54 46.18 52.74 Note : toutes les dimensions sont en mm / all dimensions are in mm 26 851 Prolongateur avec raccord simple Cable connecting receptacle with backnut 01 E HE 301 B 01 E MS 3111 E 01 R HE 301 B 01 R MS 3121 E PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Prolongateur avec raccord droit à serre-câbles Cable connecting receptacle with straight cable clamp PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS 01 EC HE 301 B 01 EC MS 3111 F 01 AC HE 301 B 01 AC 01 RC HE 301 B 01 RC MS 3121 F EC AC EC AC EC AC EC AC EC AC EC AC EC AC EC AC EC AC Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max P contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 01 E 8.. . 50.. 851 01 R 8.. . 50.. 32.70 32.00 12.03 10.60 2.10 13.50 24.24 20.99 10 851 01 E 10.. . 50.. 851 01 R 10.. . 50.. 32.70 32.00 15.01 10.60 2.10 16.70 27.44 24.19 12 851 01 E 12.. . 50.. 851 01 R 12.. . 50.. 32.70 32.00 19.07 10.60 2.10 19.90 29.79 26.54 14 851 01 E 14.. . 50.. 851 01 R 14.. . 50.. 32.70 32.00 22.25 10.60 2.10 23.40 32.10 28.89 16 851 01 E 16.. . 50.. 851 01 R 16.. . 50.. 32.70 32.00 25.42 10.60 2.10 26.60 34.59 31.29 18 851 01 E 18.. . 50.. 851 01 R 18.. . 50.. 32.70 32.00 28.60 10.60 2.10 29.50 36.94 33.69 20 851 01 E 20.. . 50.. 851 01 R 20.. . 50.. 34.50 33.40 31.77 13.85 2.65 32.70 40.14 36.89 22 851 01 E 22.. . 50.. 851 01 R 22.. . 50.. 34.50 33.40 34.95 13.85 2.65 36.00 43.24 40.00 24 851 01 E 24.. . 50.. 851 01 R 24.. . 50.. 34.50 33.40 38.12 14.70 2.65 39.10 46.44 43.29 Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G P contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 01 8.. . 50.. 851 01 RC 8.. . 50 .. 48.00 47.30 12.03 10.60 2.10 19.90 24.24 3.50 20.99 10 851 01 10.. . 50.. 851 01 RC 10.. . 50.. 48.00 47.30 15.01 10.60 2.10 21.50 27.44 5.00 24.19 12 851 01 12.. . 50.. 851 01 RC 12.. . 50.. 48.00 47.30 19.07 10.60 2.10 25.00 29.79 8.20 26.54 14 851 01 14.. . 50.. 851 01 RC 14.. . 50.. 48.00 47.30 22.25 10.60 2.10 27.80 32.10 10.00 28.89 16 851 01 16.. . 50.. 851 01 RC 16.. . 50.. 51.00 50.50 25.42 10.60 2.10 29.40 34.59 13.00 31.29 18 851 01 18.. . 50.. 851 01 RC 18.. . 50.. 51.00 50.50 28.60 10.60 2.10 35.30 36.94 16.00 33.69 20 851 01 20.. . 50.. 851 01 RC 20.. . 50.. 53.00 51.50 31.77 13.85 2.65 35.30 40.14 16.00 36.89 22 851 01 22.. . 50.. 851 01 RC 22.. . 50.. 53.00 51.50 34.95 13.85 2.65 41.10 43.24 19.30 40.00 24 851 01 24.. . 50.. 851 01 RC 24.. . 50.. 53.00 51.50 38.12 14.70 2.65 42.40 46.44 20.60 43.29 Note : toutes les dimensions sont en mm / all dimensions are in mm 27 851 Prolongateur avec raccord droit pour potting Cable connecting receptacle with straight backshell for potting Prolongateur avec raccord droit intermédiaire Cable connecting receptacle with straight adaptor PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS 01 A HE 301 B 01 A 01 RA HE 301 B 01 RA 01 P HE 301 B 01 P MS 3111 P 01 RP HE 301 B 01 RP MS 3121 P PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G max P contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 01 P 8.. . 50.. 851 01 RP 8.. . 50 .. 36.20 41.70 12.03 10.60 2.10 15.34 24.24 10.46 20.99 10 851 01 P 10.. . 50.. 851 01 RP 10.. . 50.. 36.20 41.70 15.01 10.60 2.10 17.70 27.44 13.55 24.19 12 851 01 P 12.. . 50.. 851 01 RP 12.. . 50.. 36.20 41.70 19.07 10.60 2.10 21.69 29.79 13.96 26.54 14 851 01 P 14.. . 50.. 851 01 RP 14.. . 50.. 36.20 41.70 22.25 10.60 2.10 23.90 32.10 17.42 28.89 16 851 01 P 16.. . 50.. 851 01 RP 16.. . 50.. 36.20 41.70 25.42 10.60 2.10 27.00 34.59 20.56 31.29 18 851 01 P 18.. . 50.. 851 01 RP 18.. . 50.. 36.91 44.46 28.60 10.60 2.10 30.50 36.94 23.66 33.69 20 851 01 P 20.. . 50.. 851 01 RP 20.. . 50.. 43.80 50.93 31.77 13.85 2.65 33.65 40.15 23.92 36.89 22 851 01 P 22.. . 50.. 851 01 RP 22.. . 50.. 43.80 50.93 34.95 13.85 2.65 37.10 42.24 25.52 40.00 24 851 01 P 24.. . 50.. 851 01 RP 24.. . 50.. 43.80 50.93 38.12 14.70 2.65 40.00 46.44 32.00 43.29 Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G max K filetage threading UNEF 2A P contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 01 A 8.. . 50.. 851 01 RA 8.. . 50 .. 41.00 12.03 10.60 2.10 14.50 24.24 9.10 1/2 28 20.99 10 851 01 A 10.. . 50.. 851 01 RA 10.. . 50.. 41.00 15.01 10.60 2.10 18.70 27.44 12.08 5/8 24 24.19 12 851 01 A 12.. . 50.. 851 01 RA 12.. . 50.. 41.00 19.07 10.60 2.10 21.70 29.79 15.25 3/4 20 26.54 14 851 01 A 14.. . 50.. 851 01 RA 14.. . 50.. 41.00 22.25 10.60 2.10 25.10 32.10 18.15 7/8 20 28.89 16 851 01 A 16.. . 50.. 851 01 RA 16.. . 50.. 41.00 25.42 10.60 2.10 28.13 34.59 21.32 1-20 31.29 18 851 01 A 18.. . 50.. 851 01 RA 18.. . 50.. 41.00 28.60 10.60 2.10 31.38 36.94 24.32 1-3/16 18 33.69 20 851 01 A 20.. . 50.. 851 01 RA 20.. . 50.. 44.00 31.77 13.85 2.65 34.30 40.15 26.73 1-3/16 18 36.89 22 851 01 A 22.. . 50.. 851 01 RA 22.. . 50.. 44.00 34.95 13.85 2.65 37.60 42.24 30.67 1-7/16 18 40.00 24 851 01 A 24.. . 50.. 851 01 RA 24.. . 50.. 44.00 38.12 14.70 2.65 40.70 46.44 33.08 1-7/16 18 43.29 PS PS PS PS PS PS PS PS PS Note : toutes les dimensions sont en mm / all dimensions are in mm 28 851 Prolongateur avec raccord droit pour gaine thermorétractable Cable connecting receptacle with straight backshell for heatshrink sleeving 01 T 01 RT PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Prolongateur avec raccord droit démontable pour gaine thermorétractable Cable connecting receptacle with removable straight backshell for heatshrink sleeving PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G max P max M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp souder solder sertir crimp 8 851 01 T 8.. .50.. 851 01 RT 8.. .50.. 36.70 36.00 12.03 10.60 2.10 15.35 24.24 7.20 6.70 20.99 3.70 10 851 01 T 10.. .50.. 851 01 RT 10.. .50.. 36.70 36.00 15.01 10.60 2.10 18.15 27.44 10.20 9.40 24.19 3.70 12 851 01 T 12.. .50.. 851 01 RT 12.. .50.. 36.70 36.00 19.07 10.60 2.10 23.45 29.70 13.20 11.95 26.54 3.70 14 851 01 T 14.. .50.. 851 01 RT 14.. .50.. 36.70 36.00 22.25 10.60 2.10 24.25 32.10 16.10 15.15 28.89 3.70 16 851 01 T 16.. .50.. 851 01 RT 16.. .50.. 39.00 38.30 25.42 10.60 2.10 29.55 34.59 19.25 18.05 31.29 3.70 18 851 01 T 18.. .50.. 851 01 RT 18.. .50.. 39.00 38.30 28.60 10.60 2.10 31.75 36.94 21.30 19.95 33.69 3.70 20 851 01 T 20.. .50.. 851 01 RT 20.. .50.. 45.30 44.20 31.77 13.85 2.65 35.85 40.15 24.40 23.05 36.89 3.70 22 851 01 T 22.. .50.. 851 01 RT 22.. .50.. 45.30 44.20 34.95 13.85 2.65 38.20 42.24 27.50 25.55 40.00 3.70 24 851 01 T 24.. .50.. 851 01 RT 24.. .50.. 44.00 42.60 38.12 14.70 2.65 41.30 46.44 30.60 28.65 43.29 3.70 01 M 01 RM Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G max P max M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 01 M 8.. .50.. 851 01 RM 8.. .50 .. 50.00 12.03 10.60 2.10 13.55 24.24 7.05 20.99 3.50 10 851 01 M 10.. .50.. 851 01 RM 10.. .50.. 50.00 15.01 10.60 2.10 15.35 27.44 9.90 24.19 3.50 12 851 01 M 12.. .50.. 851 01 RM 12.. .50.. 50.00 19.07 10.60 2.10 19.48 29.79 12.60 26.54 3.50 14 851 01 M 14.. .50.. 851 01 RM 14.. .50.. 50.00 22.25 10.60 2.10 21.30 32.10 15.90 28.89 3.50 16 851 01 M 16.. .50.. 851 01 RM 16.. .50.. 50.00 25.42 10.60 2.10 24.50 34.59 18.95 31.29 3.50 18 851 01 M 18.. .50.. 851 01 RM 18.. .50.. 50.00 28.60 10.60 2.10 26.45 36.94 20.90 33.69 3.50 20 851 01 M 20.. .50.. 851 01 RM 20.. .50.. 53.30 31.77 13.85 2.65 30.75 40.15 23.70 36.89 3.50 22 851 01 M 22.. .50.. 851 01 RM 22.. .50.. 53.30 34.95 13.85 2.65 34.24 42.24 26.60 40.00 3.50 24 851 01 M 24.. .50.. 851 01 RM 24.. .50.. 53.30 38.12 14.70 2.65 36.47 46.44 29.30 43.29 3.50 Note : toutes les dimensions sont en mm / all dimensions are in mm 29 851 Prolongateur avec raccord droit démontable pour reprise de tresse et gaine thermorétractable / Cable connecting receptacle with removable straight backshell for screen termination and heatshrink sleeving PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS 01 G 01 RG 01 T 01 RT PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G max M max P contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 01 G 8.. . 50.. 851 01 RG 8.. . 50 .. 54.00 12.03 10.60 2.10 16.30 24.24 7.45 3.60 20.99 10 851 01 G 10.. . 50.. 851 01 RG 10.. . 50.. 54.00 15.01 10.60 2.10 18.30 27.44 10.30 3.60 24.19 12 851 01 G 12.. . 50.. 851 01 RG 12.. . 50.. 54.00 19.07 10.60 2.10 22.30 29.79 13.20 3.60 26.54 14 851 01 G 14.. . 50.. 851 01 RG 14.. . 50.. 54.00 22.25 10.60 2.10 25.30 32.10 16.50 3.60 28.89 16 851 01 G 16.. . 50.. 851 01 RG 16.. . 50.. 54.00 25.42 10.60 2.10 28.30 34.59 19.35 3.60 31.29 18 851 01 G 18.. . 50.. 851 01 RG 18.. . 50.. 54.00 28.60 10.60 2.10 32.30 36.94 21.60 3.60 33.69 20 851 01 G 20.. . 50.. 851 01 RG 20.. . 50.. 59.30 31.77 13.85 2.65 34.30 40.15 24.80 3.60 36.89 22 851 01 G 22.. . 50.. 851 01 RG 22.. . 50.. 59.30 34.95 13.85 2.65 38.30 42.24 27.90 3.60 40.00 24 851 01 G 24.. . 50.. 851 01 RG 24.. . 50.. 59.30 38.12 14.70 2.65 41.30 46.44 31.00 3.60 43.29 PS PS PS PS PS PS PS PS PS Prolongateur avec raccord droit démontable pour reprise de tresse et gaine thermorétractable (spécifications 38 & 42) / Cable connecting receptacle with removable straight backshell for screen termination and heatshrink sleeving (38 & 42 suffix) Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G max M max P contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 01 T 8.. .50 851 01 RT 8.. .50 51.60 12.03 10.60 2.10 18.25 24.24 7.45 3.70 20.99 10 851 01 T 10.. .50 851 01 RT 10.. .50 51.60 15.01 10.60 2.10 20.25 27.44 9.00 3.70 24.19 12 851 01 T 12.. .50 851 01 RT 12.. .50 51.60 19.07 10.60 2.10 24.75 29.79 13.30 3.70 26.54 14 851 01 T 14.. .50 851 01 RT 14.. .50 51.60 22.25 10.60 2.10 27.75 32.10 16.50 3.70 28.89 16 851 01 T 16.. .50 851 01 RT 16.. .50 51.60 25.42 10.60 2.10 30.05 34.59 18.50 3.70 31.29 18 851 01 T 18.. .50 851 01 RT 18.. .50 52.00 28.60 10.60 2.10 34.15 36.94 21.90 3.70 33.69 20 851 01 T 20.. .50 851 01 RT 20.. .50 55.10 31.77 13.85 2.65 37.25 40.15 25.10 3.70 36.89 22 851 01 T 22.. .50 851 01 RT 22.. .50 55.10 34.95 13.85 2.65 40.45 42.24 28.20 3.70 40.00 24 851 01 T 24.. .50 851 01 RT 24.. .50 55.10 38.12 14.70 2.65 43.65 46.44 31.40 3.70 43.29 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 Note : toutes les dimensions sont en mm / all dimensions are in mm 30 851 Prolongateur avec raccord droit à presse-étoupe Cable connecting receptacle with straight sealing gland backshell 01 J HE 301 B 01 J PS PS PS PS PS PS PS PS PS Prolongateur avec raccord droit à presse-étoupe et serre-câbles Cable connecting receptacle with straight sealing gland and cable clamp backshell PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G P contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp min max 8 851 01 J 8.. . 50.. - 47.60 - 12.03 10.60 2.10 14.40 24.24 5.02 5.84 20.99 10 851 01 J 10.. . 50.. - 47.60 - 15.01 10.60 2.10 17.60 27.44 5.94 6.76 24.19 12 851 01 J 12.. . 50.. - 48.70 - 19.07 10.60 2.10 21.10 29.79 9.34 10.16 26.54 14 851 01 J 14.. . 50.. - 53.50 - 22.25 10.60 2.10 24.40 32.10 11.32 12.14 28.89 16 851 01 J 16.. . 50.. - 59.00 - 25.42 10.60 2.10 27.60 34.59 14.73 15.55 31.29 18 851 01 J 18.. . 50.. - 65.00 - 28.60 10.60 2.10 30.80 36.94 16.00 16.82 33.69 20 851 01 J 20.. . 50.. - 79.10 - 31.77 13.85 2.65 34.10 40.15 16.89 17.71 36.89 22 851 01 J 22.. . 50.. - 80.00 - 34.95 13.85 2.65 37.30 42.24 17.78 18.60 40.00 24 851 01 J 24.. . 50.. - 90.00 - 38.12 14.70 2.65 40.50 46.44 20.34 21.16 43.29 01 JC MS 3111 J Taille de boîtier Shell size Références / Part numbers L max A B max C max D max F max G P contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp min max 8 851 01 JC 8.. .50.. - 57.68 - 12.03 10.60 2.10 19.90 24.24 5.02 5.84 20.99 10 851 01 JC 10.. .50.. - 57.68 - 15.01 10.60 2.10 21.50 27.44 5.94 6.76 24.19 12 851 01 JC 12.. .50.. - 61.24 - 19.07 10.60 2.10 25.00 29.79 9.34 10.16 26.54 14 851 01 JC 14.. .50.. - 66.01 - 22.25 10.60 2.10 27.80 32.10 11.32 12.14 28.89 16 851 01 JC 16.. .50.. - 74.75 - 25.42 10.60 2.10 29.40 34.59 14.73 15.50 31.29 18 851 01 JC 18.. .50.. - 80.57 - 28.60 10.60 2.10 35.30 36.94 16.00 16.82 33.69 20 851 01 JC 20.. .50.. - 91.69 - 31.77 13.85 2.65 35.30 40.15 16.89 17.71 36.89 22 851 01 JC 22.. .50.. - 95.66 - 34.95 13.85 2.65 41.10 42.24 17.78 18.60 40.00 24 851 01 JC 24.. .50.. - 101.22 - 38.12 14.70 2.65 42.40 46.44 20.34 21.16 43.29 Note : toutes les dimensions sont en mm / all dimensions are in mm 31 851 Fiche avec raccord simple Plug with backnut Fiche avec raccord droit à serre-câbles Plug with straight cable clamp PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS 06 EC HE 301 B 06 EC MS 3116 F 06 AC HE 301 B 06 AC 06 RC HE 301 B 06 RC MS 3126 F VG 95328 K 06 E HE 301 B 06 E MS 3116 E 06 R HE 301 B 06 R MS 3126 E PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A max D contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 06 E 8 .. . 50.. 851 06 R 8 .. . 50 .. 32.54 32.00 19.05 13.50 10 851 06 E 10 .. . 50.. 851 06 R 10 .. . 50.. 32.54 32.00 21.80 16.70 12 851 06 E 12 .. . 50.. 851 06 R 12 .. . 50.. 32.54 32.00 26.15 19.90 14 851 06 E 14 .. . 50.. 851 06 R 14 .. . 50.. 32.54 32.00 29.35 23.40 16 851 06 E 16 .. . 50.. 851 06 R 16 .. . 50.. 32.54 32.00 32.50 26.60 18 851 06 E 18 .. . 50.. 851 06 R 18 .. . 50.. 32.54 32.00 35.30 29.60 20 851 06 E 20 .. . 50.. 851 06 R 20 .. . 50.. 33.30 32.10 38.85 32.70 22 851 06 E 22 .. . 50.. 851 06 R 22 .. . 50.. 33.30 32.10 42.05 36.00 24 851 06 E 24 .. . 50.. 851 06 R 24 .. . 50.. 33.30 32.10 45.10 39.10 PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A max D max contacts à souder G solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 06 8 .. . 50.. 851 06 RC 8 .. . 50 .. 48.00 47.30 19.05 19.90 3.50 10 851 06 10 .. . 50.. 851 06 RC 10 .. . 50.. 48.00 47.30 21.80 21.50 5.00 12 851 06 12 .. . 50.. 851 06 RC 12 .. . 50.. 48.00 47.30 26.15 25.00 8.20 14 851 06 14 .. . 50.. 851 06 RC 14 .. . 50.. 48.00 47.30 29.35 27.80 10.00 16 851 06 16 .. . 50.. 851 06 RC 16 .. . 50.. 51.00 50.50 32.50 29.40 13.00 18 851 06 18 .. . 50.. 851 06 RC 18 .. . 50.. 51.00 50.50 35.30 35.30 16.00 20 851 06 20 .. . 50.. 851 06 RC 20 .. . 50.. 52.00 50.20 38.85 35.30 16.00 22 851 06 22 .. . 50.. 851 06 RC 22 .. . 50.. 52.00 50.20 42.05 41.10 19.30 24 851 06 24 .. . 50.. 851 06 RC 24 .. . 50.. 52.00 50.20 45.10 42.40 20.60 EC AC EC AC EC AC EC AC EC AC EC AC EC AC EC AC EC AC Note : toutes les dimensions sont en mm / all dimensions are in mm 32 851 Fiche avec raccord droit pour potting Plug with straight backshell for potting PS PS PS PS PS PS PS PS PS Fiche avec raccord droit intermédiaire Plug with straight adaptor PS PS PS PS PS PS PS PS PS 06 P HE 301 B 06 P MS 3116 P 06 RP HE 301 B 06 RP MS 3126 P Taille de boîtier Shell size Références / Part numbers L max A max D max contacts à souder G solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 06 P 8 .. . 50.. 851 06 RP 8 .. . 50 .. 36.20 42.10 19.05 15.34 10.46 10 851 06 P 10 .. . 50.. 851 06 RP 10 .. . 50.. 36.20 42.10 21.80 17.70 13.55 12 851 06 P 12 .. . 50.. 851 06 RP 12 .. . 50.. 36.20 42.10 26.15 21.69 13.96 14 851 06 P 14 .. . 50.. 851 06 RP 14 .. . 50.. 36.20 42.10 29.35 23.90 17.42 16 851 06 P 16 .. . 50.. 851 06 RP 16 .. . 50.. 36.20 42.10 32.50 27.00 20.56 18 851 06 P 18 .. . 50.. 851 06 RP 18 .. . 50.. 37.70 45.40 35.30 30.50 23.66 20 851 06 P 20 .. . 50.. 851 06 RP 20 .. . 50.. 42.40 50.00 38.85 33.65 23.92 22 851 06 P 22 .. . 50.. 851 06 RP 22 .. . 50.. 42.40 50.00 42.05 37.10 25.52 24 851 06 P 24 .. . 50.. 851 06 RP 24 .. . 50.. 42.85 50.00 45.10 40.00 32.00 PS PS PS PS PS PS PS PS PS 06 A HE 301 B 06 A 06 RA HE 301 B 06 RA Taille de boîtier Shell size Références / Part numbers L max A max D max G max F filetage threading UNEF 2A contacts à souder solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 06 A 8 .. . 50.. 851 06 RA 8 .. . 50 .. 41.00 41.00 19.05 14.50 9.10 1/2 28 10 851 06 A 10 .. . 50.. 851 06 RA 10 .. . 50.. 41.00 41.00 21.80 18.70 12.08 5/8 24 12 851 06 A 12 .. . 50.. 851 06 RA 12 .. . 50.. 41.00 41.00 26.15 21.70 15.25 3/4 20 14 851 06 A 14 .. . 50.. 851 06 RA 14 .. . 50.. 41.00 41.00 29.35 25.10 18.15 7/8 20 16 851 06 A 16 .. . 50.. 851 06 RA 16 .. . 50.. 41.00 41.00 32.50 28.13 21.32 1-20 18 851 06 A 18 .. . 50.. 851 06 RA 18 .. . 50.. 41.00 41.00 35.30 31.38 24.32 1-3/16 18 20 851 06 A 20 .. . 50.. 851 06 RA 20 .. . 50.. 44.00 43.30 38.85 34.30 26.73 1-3/16 18 22 851 06 A 22 .. . 50.. 851 06 RA 22 .. . 50.. 44.00 43.30 42.05 37.60 30.67 1-7/16 18 24 851 06 A 24 .. . 50.. 851 06 RA 24 .. . 50.. 44.00 43.50 45.10 40.70 33.08 1-7/16 18 PS PS PS PS PS PS PS PS PS Note : toutes les dimensions sont en mm / all dimensions are in mm 33 851 Fiche avec raccord droit pour gaine thermorétractable Plug with straight backshell for heatshrink sleeving Fiche avec raccord droit démontable pour gaine thermorétractable Plug with removable straight backshell for heatshrink sleeving PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS 06 M 06 RM 06 T 06 RT VG 95328 J PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A max D max G max M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp souder solder sertir crimp 8 851 06 T 8.. . 50.. 851 06 RT 8.. . 50 .. 36.70 36.00 19.05 15.35 7.20 6.70 3.70 10 851 06 T 10.. . 50.. 851 06 RT 10.. . 50.. 36.70 36.00 21.80 18.15 10.20 9.40 3.70 12 851 06 T 12.. . 50.. 851 06 RT 12.. . 50.. 36.70 36.00 26.15 23.45 13.20 11.95 3.70 14 851 06 T 14.. . 50.. 851 06 RT 14.. . 50.. 36.70 36.00 29.35 24.25 16.10 15.15 3.70 16 851 06 T 16.. . 50.. 851 06 RT 16.. . 50.. 39.00 38.30 32.50 29.55 19.25 18.05 3.70 18 851 06 T 18.. . 50.. 851 06 RT 18.. . 50.. 39.00 38.30 35.30 31.75 21.30 19.95 3.70 20 851 06 T 20.. . 50.. 851 06 RT 20.. . 50.. 44.00 42.90 38.85 35.85 24.40 23.05 3.70 22 851 06 T 22.. . 50.. 851 06 RT 22.. . 50.. 44.00 42.90 42.05 38.20 27.50 25.55 3.70 24 851 06 T 24.. . 50.. 851 06 RT 24.. . 50.. 42.70 41.60 45.10 41.30 30.60 28.65 3.70 Taille de boîtier Shell size Références / Part numbers L max A max D max G max M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 06 M 8 .. . 50.. 851 06 RM 8 .. . 50 .. 50.00 19.05 13.55 7.05 3.50 10 851 06 M 10 .. . 50.. 851 06 RM 10 .. . 50.. 50.00 21.80 15.35 9.90 3.50 12 851 06 M 12 .. . 50.. 851 06 RM 12 .. . 50.. 50.00 26.15 19.48 12.60 3.50 14 851 06 M 14 .. . 50.. 851 06 RM 14 .. . 50.. 50.00 29.35 21.30 15.90 3.50 16 851 06 M 16 .. . 50.. 851 06 RM 16 .. . 50.. 50.00 32.50 24.50 18.95 3.50 18 851 06 M 18 .. . 50.. 851 06 RM 18 .. . 50.. 50.00 35.30 26.45 20.90 3.50 20 851 06 M 20 .. . 50.. 851 06 RM 20 .. . 50.. 52.00 38.85 30.73 23.70 3.50 22 851 06 M 22 .. . 50.. 851 06 RM 22 .. . 50.. 52.00 42.05 34.24 26.60 3.50 24 851 06 M 24 .. . 50.. 851 06 RM 24 .. . 50.. 52.00 45.10 36.47 29.30 3.50 Note : toutes les dimensions sont en mm / all dimensions are in mm 34 851 Fiche avec raccord droit à presse-étoupe Plug with straight sealing gland backshell PS PS PS PS PS PS PS PS PS Fiche avec raccord droit à presse-étoupe et serre-câbles Plug with straight sealing gland and cable clamp backshells PS PS PS PS PS PS PS PS PS 06 J HE 301 B 06 J 06 JC MS 3116 J Taille de boîtier Shell size Références / Part numbers L max A max D max G max contacts à souder solder contacts contacts à sertir crimp contacts souder solder sertir crimp min max 8 851 06 J 8 .. . 50.. - 47.60 - 19.05 14.40 5.02 5.84 10 851 06 J 10 .. . 50.. - 47.60 - 21.80 17.60 5.94 6.76 12 851 06 J 12 .. . 50.. - 49.20 - 26.15 21.10 9.34 10.16 14 851 06 J 14 .. . 50.. - 54.00 - 29.35 24.40 11.32 12.14 16 851 06 J 16 .. . 50.. - 59.60 - 32.50 27.60 14.73 15.55 18 851 06 J 18 .. . 50.. - 65.60 - 35.30 30.80 16.00 16.80 20 851 06 J 20 .. . 50.. - 78.00 - 38.85 34.10 16.89 17.71 22 851 06 J 22 .. . 50.. - 79.50 - 42.05 37.30 17.78 18.60 24 851 06 J 24 .. . 50.. - 90.00 - 45.10 40.50 20.34 21.16 Taille de boîtier Shell size Références / Part numbers L max A max D max G max contacts à souder solder contacts contacts à sertir crimp contacts souder solder sertir crimp min max 8 851 06 JC 8 .. . 50.. - 57.68 - 19.05 19.90 5.02 5.84 10 851 06 JC 10 .. . 50.. - 57.68 - 21.80 21.50 5.94 6.76 12 851 06 JC 12 .. . 50.. - 61.24 - 26.15 25.00 9.34 10.16 14 851 06 JC 14 .. . 50.. - 66.01 - 29.35 27.80 11.32 12.14 16 851 06 JC 16 .. . 50.. - 74.75 - 32.50 29.40 14.73 15.50 18 851 06 JC 18 .. . 50.. - 80.57 - 35.30 35.30 16.00 16.82 20 851 06 JC 20 .. . 50.. - 91.69 - 38.85 35.30 16.89 17.71 22 851 06 JC 22 .. . 50.. - 95.66 - 42.05 41.10 17.78 18.60 24 851 06 JC 24 .. . 50.. - 101.22 - 45.10 42.40 20.34 21.16 Note : toutes les dimensions sont en mm / all dimensions are in mm 35 851 Fiche avec raccord coudé à serre-câbles Plug with elbow cable clamp backshell PS PS PS PS PS PS PS PS PS 08 EC HE 301 B 08 EC 08 RC HE 301 B 08 RC PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A max D max G R contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 08 EC 8 .. . 50.. 851 08 RC 8 .. . 50.. 50.10 19.05 19.70 3.50 16.00 10 851 08 EC 10 .. . 50.. 851 08 RC 10 .. . 50.. 52.60 21.80 21.20 5.00 18.00 12 851 08 EC 12 .. . 50.. 851 08 RC 12 .. . 50.. 54.90 26.15 24.20 8.20 19.50 14 851 08 EC 14 .. . 50.. 851 08 RC 14 .. . 50.. 58.50 29.35 27.50 10.00 22.00 16 851 08 EC 16 .. . 50.. 851 08 RC 16 .. . 50.. 60.80 32.50 29.10 13.00 23.50 18 851 08 EC 18 .. . 50.. 851 08 RC 18 .. . 50.. 65.00 35.30 35.70 16.00 25.00 20 851 08 EC 20 .. . 50.. 851 08 RC 20 .. . 50.. 69.10 38.85 35.70 16.00 26.50 22 851 08 EC 22 .. . 50.. 851 08 RC 22 .. . 50.. 71.00 42.05 39.70 19.30 28.00 24 851 08 EC 24 .. . 50.. 851 08 EC 24 .. . 50.. 75.50 45.10 43.50 20.60 31.00 Fiche avec raccord coudé pour potting Plug with elbow backshell for potting PS PS PS PS PS PS PS PS PS 08 P HE 301 B 08 P 08 RP HE 301 B 08 RP PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A max G max R max S contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 08 P 8 .. . 50.. 851 08 RP 8 .. . 50.. 40.70 19.05 8.10 11.70 11.30 10 851 08 P 10 .. . 50.. 851 08 RP 10 .. . 50.. 44.90 21.80 11.30 14.35 14.50 12 851 08 P 12 .. . 50.. 851 08 RP 12 .. . 50.. 46.90 26.15 13.30 15.90 17.70 14 851 08 P 14 .. . 50.. 851 08 RP 14 .. . 50.. 49.20 29.35 16.10 16.30 20.10 16 851 08 P 16 .. . 50.. 851 08 RP 16 .. . 50.. 50.60 32.50 16.90 19.30 22.80 18 851 08 P 18 .. . 50.. 851 08 RP 18 .. . 50.. 51.80 35.30 18.10 20.60 25.60 20 851 08 P 20 .. . 50.. 851 08 RP 20 .. . 50.. 53.70 38.85 19.70 21.90 28.80 22 851 08 P 22 .. . 50.. 851 08 RP 22 .. . 50.. 54.80 42.05 20.80 23.50 31.60 24 851 08 P 24 .. . 50.. 851 08 RP 24 .. . 50.. 58.20 45.10 24.20 30.15 35.20 Note : toutes les dimensions sont en mm / all dimensions are in mm 36 851 Fiche avec bracelet de blindage et raccord intermédiaire Screened plug with straight adaptor PS PS PS PS PS PS PS PS PS 36 A 36 RA VG 95328 N PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A max D max G max F filetage threading UNEF 2A contacts à souder solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 36 A 8 .. . 50.. 851 36 RA 8 .. . 50.. 41.00 19.05 14.50 9.10 1/2 28 10 851 36 A 10 .. . 50.. 851 36 RA 10 .. . 50.. 41.00 21.80 18.70 12.08 5/8 24 12 851 36 A 12 .. . 50.. 851 36 RA 12 .. . 50.. 41.00 26.15 21.70 15.25 3/4 20 14 851 36 A 14 .. . 50.. 851 36 RA 14 .. . 50.. 41.00 29.35 25.10 18.15 7/8 20 16 851 36 A 16 .. . 50.. 851 36 RA 16 .. . 50.. 41.00 32.50 28.13 21.32 1-20 18 851 36 A 18 .. . 50.. 851 36 RA 18 .. . 50.. 41.00 35.30 31.38 24.32 1-3/16 18 20 851 36 A 20 .. . 50.. 851 36 RA 20 .. . 50.. 43.30 38.85 34.30 26.73 1-3/16 18 22 851 36 A 22 .. . 50.. 851 36 RA 22 .. . 50.. 43.30 42.05 37.60 30.67 1-7/16 18 24 851 36 A 24 .. . 50.. 851 36 RA 24 .. . 50.. 43.50 45.10 40.70 33.08 1-7/16 18 Note : toutes les dimensions sont en mm / all dimensions are in mm PS PS PS PS PS PS PS PS PS 36 T 36 RT PS PS PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A max D max G max M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 36 T 8 .. . 50.. 851 36 RT 8 .. . 50.. 51.60 19.05 18.25 7.45 3.70 10 851 36 T 10 .. . 50.. 851 36 RT 10 .. . 50.. 51.60 21.80 20.25 9.00 3.70 12 851 36 T 12 .. . 50.. 851 36 RT 12 .. . 50.. 51.60 26.15 24.75 13.30 3.70 14 851 36 T 14 .. . 50.. 851 36 RT 14 .. . 50.. 51.60 29.35 27.75 16.50 3.70 16 851 36 T 16 .. . 50.. 851 36 RT 16 .. . 50.. 51.60 32.50 30.05 18.50 3.70 18 851 36 T 18 .. . 50.. 851 36 RT 18 .. . 50.. 52.00 35.30 34.15 21.90 3.70 20 851 36 T 20 .. . 50.. 851 36 RT 20 .. . 50.. 53.90 38.85 37.25 25.10 3.70 22 851 36 T 22 .. . 50.. 851 36 RT 22 .. . 50.. 53.90 42.05 40.45 28.20 3.70 24 851 36 T 24 .. . 50.. 851 36 RT 24 .. . 50.. 53.90 45.10 43.65 31.40 3.70 Fiche avec bague de blindage et raccord droit démontable pour reprise de tresse et gaine thermorétractable (spécifications 38 & 42)/ Screened plug with removable straight backshell for screen termination and heatshrink sleeving (38 & 42 suffix) 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 38 42 37 851 Fiche avec bague de blindage et raccord droit démontable pour reprise de tresse et gaine thermorétractable / Screened plug with removable straight backshell for screen termination and heatshrink sleeving 36 G 36 RG VG 95328 M Taille de boîtier Shell size Références / Part numbers L max A max D max G max M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 851 36 G 8 .. . 50.. 851 36 RG 8 .. . 50.. 54.00 19.05 16.30 7.45 3.60 10 851 36 G10 .. . 50.. 851 36 RG 10 .. . 50.. 54.00 21.80 18.30 10.30 3.60 12 851 36 G 12 .. . 50.. 851 36 RG 12 .. . 50.. 54.00 26.15 22.30 13.20 3.60 14 851 36 G 14 .. . 50.. 851 36 RG 14 .. . 50.. 54.00 29.35 25.30 16.50 3.60 16 851 36 G 16 .. . 50.. 851 36 RG 16 .. . 50.. 54.00 32.50 28.30 19.35 3.60 18 851 36 G 18 .. . 50.. 851 36 RG 18 .. . 50.. 54.00 35.30 32.30 21.60 3.60 20 851 36 G 20 .. . 50.. 851 36 RG 20 .. . 50.. 58.00 38.85 34.30 24.80 3.60 22 851 36 G 22 .. . 50.. 851 36 RG 22 .. . 50.. 58.00 42.05 38.30 27.90 3.60 24 851 36 G 24 .. . 50.. 851 36 RG 24 .. . 50.. 58.00 45.10 41.30 31.00 3.60 PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS Note : toutes les dimensions sont en mm / all dimensions are in mm PS PS PS PS PS PS PS 06 Z 06 RZ PS PS PS PS PS PS PS Taille de boîtier Shell size Références / Part numbers L max A max B max C max D filetage threading PE contacts à souder solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 10 12 851 06 Z 12 .. . 50.. 851 06 RZ 12 .. . 50.. 43.00 26.15 9.10 24.80 11 14 851 06 Z14 .. . 50.. 851 06 RZ 14 .. . 50.. 45.00 29.35 11.00 28.80 16 16 851 06 Z 16 .. . 50.. 851 06 RZ 16 .. . 50.. 45.00 32.50 11.00 30.80 16 18 851 06 Z 18 .. . 50.. 851 06 RZ 18 .. . 50.. 46.00 35.30 12.00 40.80 21 20 851 06 Z 20 .. . 50.. 851 06 RZ 20 .. . 50.. 46.50 38.85 12.00 40.80 21 22 851 06 Z 22 .. . 50.. 851 06 RZ 22 .. . 50.. 46.50 42.05 12.00 40.80 21 24 851 06 Z24 .. . 50.. 851 06 RZ 24 .. . 50.. 65.50 45.10 31.40 45.00 29 Fiche avec raccord pour adaptation d’accessoires au pas électrique Plug with straight adaptor for electrical pitch access Le manchon intermédiaire spécial de type Z qui équipe la fiche à sertir 851 06 RZ est adapté aux accessoires de câblages. - Raccord à griffes et presse-étoupe - Raccord pour gaine polyflex - Raccord pour tuyau C.N.O.M.O. The Z type special adaptor which equips crimp plug 851 06 RZ fits following accessories. - Packing gland collet backshell - Backshell for polyflex sleeving - Backshell for C.N.O.M.O. tube 38 851 Fiche avec bague de blindage et doigt de verrouillage, avec raccord droit court à reprise de tresse et gaine thermorétractable / Screened plug with lock finger and short backshell for screen termination and heatshrink sleeving PS PS PS 76 U 76 RU PS PS PS Taille de boîtier Shell size Références / Part numbers L max A max D max H max G max E max M contacts à souder max solder contacts contacts à sertir crimp contacts souder solder sertir crimp 8 10 12 851 76 U 12.. . 50.. 851 76 R U 12.. .50.. 35.60 25.00 22.50 32.00 13.20 19.50 3.70 14 851 76 U 14.. . 50.. 851 76 R U 14.. .50.. 35.60 29.00 25.50 32.00 16.10 21.00 3.70 16 851 76 U 16.. . 50.. 851 76 R U 16.. .50.. 35.60 32.00 28.50 32.00 19.25 22.50 3.70 18 20 22 24 Note : toutes les dimensions sont en mm / all dimensions are in mm 39 851 Embase à fixation par écrou Jam nut receptacle PS PS PS PS PS PS PS PS PS 07 H HE 301 B 07 H MS 3114 H VG 95328 F Taille de boîtier Shell size Références / Part numbers A C max D max G L max M max P 8 851 07 H 8 .. . 50.. 12.03 24.07 27.37 14.26 20.53 17.93 13.33 10 851 07 H 10 .. . 50.. 15.01 27.22 30.57 17.43 20.53 17.93 16.51 12 851 07 H 12 .. . 50.. 19.07 32.00 35.32 22.19 20.53 17.93 20.63 14 851 07 H 14 .. . 50.. 22.25 35.17 38.50 25.36 20.53 17.93 23.78 16 851 07 H 16 .. . 50.. 25.42 38.35 41.67 28.54 20.53 17.93 26.93 18 851 07 H 18 .. . 50.. 28.60 41.52 44.85 31.71 20.53 17.93 30.10 20 851 07 H 20 .. . 50.. 31.77 46.27 49.62 34.89 26.10 22.70 33.28 22 851 07 H 22 .. . 50.. 34.95 49.47 52.77 38.06 26.10 22.70 36.45 24 851 07 H 24 .. . 50.. 38.12 52.62 55.97 41.24 26.93 23.54 39.63 Connecteurs hermétiques / Hermetic connectors Embase à collerette carrée Square flange receptacle PS PS PS PS PS PS PS PS PS 02 H HE 301 B 02 H Taille de boîtier Shell size Références / Part numbers A C max D max E F G H max J M max N max 8 851 02 H 8 .. . 50.. 12.03 21.42 27.09 15.09 13.84 14.27 6.97 3.13 11.24 1.67 10 851 02 H 10 .. . 50.. 15.01 24.62 31.87 18.26 13.84 17.06 6.97 3.13 11.24 1.67 12 851 02 H 12 .. . 50.. 19.07 26.98 35.04 20.62 13.84 19.85 6.97 3.13 11.24 1.67 14 851 02 H 14 .. . 50.. 22.25 29.36 38.22 23.00 13.84 23.00 6.97 3.13 11.24 1.67 16 851 02 H 16 .. . 50.. 25.42 31.73 41.39 24.61 13.84 26.18 6.97 3.13 11.24 1.67 18 851 02 H 18 .. . 50.. 28.60 34.12 44.57 26.97 13.84 29.36 6.97 3.13 11.24 1.67 20 851 02 H 20 .. . 50.. 31.77 37.20 47.74 29.36 15.42 31.74 6.99 3.13 12.00 2.48 22 851 02 H 22 .. . 50.. 34.95 40.47 50.92 31.75 16.23 34.92 6.99 3.13 12.00 2.48 24 851 02 H 24 .. . 50.. 38.12 43.66 55.69 34.92 17.04 38.10 6.19 3.81 12.81 2.48 Note : toutes les dimensions sont en mm / all dimensions are in mm 40 851 Connecteurs pour connexions enroulées et à picots droits Wire-wrap and PC tail connectors Embase à collerette ronde, fixation par brasage Solder fixing receptacle PS PS PS PS PS PS PS PS PS IH HE 301 B 1H MS 3113 H VG 95328 G Taille de boîtier Shell size Références / Part numbers A D max H max F G max M max N max 8 851 IH 8 .. . 50.. 12.03 16.40 8.19 13.84 14.27 10.69 0.76 10 851 IH 10 .. . 50.. 15.01 19.40 8.19 13.84 17.06 10.69 0.76 12 851 IH 12 .. . 50.. 19.07 21.80 8.19 13.84 19.83 10.69 0.76 14 851 IH 14 .. . 50.. 22.25 25.00 8.19 13.84 23.00 10.69 0.76 16 851 IH 16 .. . 50.. 25.42 28.10 8.19 13.84 26.18 10.69 0.76 18 851 IH 18 .. . 50.. 28.60 31.30 8.19 13.84 29.36 10.69 0.76 20 851 IH 20 .. . 50.. 31.77 33.70 8.16 15.42 31.74 12.32 0.76 22 851 IH 22 .. . 50.. 34.95 36.90 8.16 16.23 34.92 12.32 0.76 24 851 IH 24 .. . 50.. 38.12 40.10 7.36 17.04 38.10 13.12 0.76 Embase à collerette carrée type 02E Square flange receptacle type 02E PS PS PS PS PS PS PS PS PS Version pour connexions enroulées (WW) Wire-wrap version Version à picots droits PC tail version Taille de boîtier Shell size Références / Part numbers A B max C max Ø D max E F max H +1.63 0 J L max T +1.25 0 version WW WW version version à picots PC tail version 8 851 02 E 8.. .50.. 851 02 E 8.. .50.. 12.03 11.70 1.32 10.84 15.09 20.99 12.42 3.13 20.50 9.46 10 851 02 E 10.. .50.. 851 02 E 10.. .50.. 15.01 11.70 1.32 13.99 18.26 24.19 12.42 3.13 20.50 9.46 12 851 02 E 12.. .50.. 851 02 E 12.. .50.. 19.07 11.70 1.32 17.37 20.62 26.54 12.42 3.13 20.50 9.46 14 851 02 E 14.. .50.. 851 02 E 14.. .50.. 22.25 11.70 1.32 20.57 23.00 28.89 12.42 3.13 20.50 9.46 16 851 02 E 16.. .50.. 851 02 E 16.. .50.. 25.42 11.70 1.32 23.62 24.61 31.29 12.42 3.13 20.50 9.46 18 851 02 E 18.. .50.. 851 02 E 18.. .50.. 28.60 11.70 1.32 26.69 26.97 33.69 12.42 3.13 20.50 9.46 20 851 02 E 20.. .50.. 851 02 E 20.. .50.. 31.77 14.35 2.15 29.89 29.36 36.89 10.69 3.13 23.80 7.76 22 851 02 E 22.. .50.. 851 02 E 22.. .50.. 34.95 14.35 2.15 33.04 31.75 39.99 10.69 3.13 23.80 7.76 24 851 02 E 24.. .50.. 851 02 E 24.. .50.. 38.12 15.20 2.15 36.24 34.92 43.15 10.69 3.81 23.80 7.76 PS PS PS PS PS PS PS PS PS 16 40 16 40 16 40 16 40 16 40 16 40 16 40 16 40 16 40 34 34A 34 34A 34 34A 34 34A 34 34A 34 34A 34 34A 34 34A 34 34A Note : toutes les dimensions sont en mm / all dimensions are in mm 41 851 Perçage cloison Panel cut-out Taille de boîtier Shell size A±0.1 B±0.1 C±0.1 E±0.15 J±0.15 N P±0.1 X min max min 8 15.55 14.60 14.70 15.10 3.15 1.57 3.17 13.75 2.90 10 18.80 17.75 17.50 18.26 3.15 1.57 3.17 16.95 2.90 12 22.15 22.50 20.20 20.62 3.15 1.57 3.17 21.50 2.90 14 25.30 25.70 23.40 23.00 3.15 1.57 3.17 24.20 2.90 16 28.45 28.85 26.60 24.60 3.15 1.57 3.17 27.35 2.90 18 31.65 32.05 29.80 26.97 3.15 1.57 3.17 30.55 2.90 20 34.80 35.20 32.10 29.36 3.15 1.57 6.35 33.70 5.50 22 38.00 38.40 35.30 31.75 3.15 1.57 6.35 36.90 5.50 24 41.20 41.55 38.40 34.92 3.73 1.57 6.35 40.05 5.50 Embase à fixation par écrou type 07A Jam nut receptacle type 07A PS PS PS PS PS PS PS PS PS Version pour connexions enroulées (WW) Wire-wrap version Version à picots droits PC tail version Taille de boîtier Shell size Références / Part numbers A B max C max F max H +1.63 0 L max P max S max T +1.25 0 version WW WW version version à picots PC tail version 8 851 07 A 8.. .50.. 851 07 A 8.. .50.. 12.03 17.90 2.64 26.94 12.42 20.64 19.29 23.94 9.46 10 851 07 A 10.. .50.. 851 07 A 10.. .50.. 15.01 17.90 2.64 30.14 12.42 20.64 22.38 26.95 9.46 12 851 07 A 12.. .50.. 851 07 A 12.. .50.. 19.07 17.90 2.64 34.94 12.42 20.64 27.13 31.74 9.46 14 851 07 A 14.. .50.. 851 07 A 14.. .50.. 22.25 17.90 2.64 38.04 12.42 20.64 30.33 34.94 9.46 16 851 07 A 16.. .50.. 851 07 A 16.. .50.. 25.42 17.90 2.64 41.26 12.42 20.64 33.48 38.24 9.46 18 851 07 A 18.. .50.. 851 07 A 18.. .50.. 28.60 17.90 2.64 44.44 12.42 20.64 36.68 41.34 9.46 20 851 07 A 20.. .50.. 851 07 A 20.. .50.. 31.77 22.45 3.44 49.14 8.64 25.99 39.83 46.04 8.49 22 851 07 A 22.. .50.. 851 07 A 22.. .50.. 34.95 22.45 3.44 52.24 8.64 25.99 43.03 49.24 8.49 24 851 07 A 24.. .50.. 851 07 A 24.. .50.. 38.12 23.30 3.44 55.54 7.79 26.84 46.18 52.74 7.79 PS PS PS PS PS PS PS PS PS 16 40 16 40 16 40 16 40 16 40 16 40 16 40 16 40 16 40 34 34A 34 34A 34 34A 34 34A 34 34A 34 34A 34 34A 34 34A 34 34A Embase à collerette carrée Square flange receptacle Embase à fixation par écrou Jam nut receptacle Embase à collerette ronde Solder fixing receptacle Note : toutes les dimensions sont en mm / all dimensions are in mm 42 851 Embase de repos Dummy receptacle Accessoires / Accessories Taille de boîtier Shell size Références Part numbers A C max E J M max N max 8 8500-18 12.03 20.99 15.09 3.13 11.70 1.32 10 8500-19 15.01 24.19 18.26 3.13 11.70 1.32 12 8500-20 19.07 26.54 20.62 3.13 11.70 1.32 14 8500-21 22.25 28.89 23.00 3.13 11.70 1.32 16 8500-26 25.42 31.29 24.61 3.13 11.70 1.32 18 8500-22 28.60 33.69 26.97 3.13 11.70 1.32 20 8500-23 31.77 36.89 29.36 3.13 14.35 2.15 22 8500-24 34.95 39.99 31.75 3.13 14.35 2.15 24 8500-25 38.12 43.15 34.92 3.81 15.20 2.15 Bouchons de protection plastique pour embase & fiche Plastic protective caps for receptacle and plug Taille de boîtier Shell size Bouchons pour embase Caps for receptacles Bouchons pour fiches Caps for plugs 8 8500-5585 A 8500-5594 10 8500-5586 A 8500-5595 12 8500-5587 A 8500-5596 14 8500-5588 A 8500-5597 16 8500-5589 A 8500-5598 18 8500-5590 A 8500-5599 20 8500-5591 A 8500-5600 22 8500-5592 A 8500-5601 24 8500-5593 A 8500-5602 Joint de cloison Gaskets Taille de boîtier Shell size Joints pour embase à collerette carrée / Gaskets for square flange receptacle Joints pour embase à fixation par écrou / Gaskets for jam nut receptacle néoprène fairprène néoprène vitton 8 8500-275 8500-4164 3330102 3330675 10 8500-276 8500-4165 3330103 3330670 12 8500-277 8500-4166 3330104 3330671 14 8500-278 8500-4167 3330105 3330672 16 8500-283 8500-4168 3330106 3331048 18 8500-279 8500-4169 3330107 3331049 20 8500-280 8500-4170 3330108 3331050 22 8500-281 8500-4171 3330109 3331051 24 8500-282 8500-4172 3330110 3331052 Note : toutes les dimensions sont en mm / all dimensions are in mm 43 Notes / Notes 44 851 Type de bouchon Cap type Bouchons pour embase / Receptacle cap Bouchons pour fiche / Plug cap Cadmiage vert olive Olive green cadmium Cadmium incolore White cadmium Oxydation noir Blak anodised Nickelage Nickel Cadmiage vert olive Olive green cadmium Cadmium incolore White cadmium Oxydation noir Blak anodised Nickelage Nickel Bouchon avec chaînette métallique et oeillet de fixation Cap with chain and ring D 02 D 29 D 44 D D 02 D 29 D 44 D Bouchon avec cordonnet nylon et oeillet de fixation Cap with nylon cord and ring B 02 B 29 B 44 B B 02 B 29 B 44 B Bouchon avec cordonnet nylon et rondelle de fixation (boîtier 10, 12, 14, 16 & 18) Cap with nylon cord and washer (shell 10, 12 , 14, 16 & 18) - - - - E - - - Bouchon avec cordonnet nylon et rondelle de fixation Cap with nylon cord and washer H - - 44 H - - - - Bouchon avec chaînette métallique et rondelle de fixation Cap with chain and washer J - - - - - - - Bouchon 500 H brouillard salin Cap 500hr salt spray JQ7 - - - - - - - Bouchon sans cordonnet Cap without chain M - - - M - - - Bouchons / Caps Références / Ordering Information Racine / Basic series 8500 05 - - - Type de boîtier / Shell size Référence pour embase / Part numbers for receptacle Référence pour fiche / Part numbers for plug 8 02 10 10 03 11 12 04 12 14 05 13 16 27 28 18 06 14 20 07 15 22 08 16 24 09 17 Spécifications / Specifications pour type de bouchon & protection, voir tableau ci-dessous / for cap & plating, see table below Types et protections / Type and plating Bouchons pour fiches Caps for plugs Taille de boîtier Shell size Ø A max B max C+6 0 D+2 0 E Ø F 8 16.80 19.84 132 128 - - 10 19.80 19.84 132 128 132 14.00 12 23.90 19.84 148 140 148 17.60 14 27.00 19.84 148 140 148 20.80 16 30.20 19.84 148 140 148 25.60 18 33.40 19.84 148 140 148 28.70 20 36.50 21.44 168 153 - - 22 39.80 21.44 168 153 - - 24 42.90 22.22 168 153 - - « - » nous contacter / consult us D B & M E Note : toutes les dimensions sont en mm / all dimensions are in mm 45 851 Bouchons pour embases Caps for receptacles D J & JQ7 B & M H Taille de boîtier Shell size Ø A max B max C+6 0 D+2 0 J max H+2 0 K+6 0 8 19.00 21.44 84 77 14.80 80 84 10 21.80 21.44 84 77 17.90 80 84 12 26.10 21.44 100 89 22.70 90 100 14 29.30 21.44 100 89 25.90 90 100 16 32.50 21.44 100 89 29.00 90 100 18 35.30 21.44 100 89 32.20 90 100 20 38.80 21.44 116 102 35.40 110 116 22 42.00 21.44 116 102 38.60 110 116 24 45.10 22.22 116 102 41.70 110 116 Note : toutes les dimensions sont en mm / all dimensions are in mm 46 851 Références des raccords / Backshell ordering information Pour les types de protection voir références page 11 / For plating types see part numbers page 11 24 8500-5890 LP 8500-5890 110 8500-5890 202 8500-2477 900 8500-2477 902 8500-2477 903 8500-1567 LP 8500-474 8500-690 8500-456 LP - - 8500-4029 LP 8500-4029 110 - 8500-4053 900 - - 8500-8982 900 - 8500-8982 903 851 T 24-38 851 T 24-42 8500-5881 8500-5908 LP 22 8500-5889 LP 8500-5889 110 8500-5889 202 8500-2476 900 8500-2476 902 8500-2476 903 8500-1566 LP 8500-473 8500-689 8500-3186 LP - - 8500-4028 LP 8500-4028 110 - 8500-4052 900 - - 8500-8981 900 - 8500-8981 903 851 T 22-38 851 T 22-42 8500-5880 8500-5907 LP 20 8500-5888 LP 8500-5888 110 8500-5888 202 8500-2475 900 8500-2475 902 8500-2475 903 8500-1565 LP 8500-472 8500-688 8500-3185 LP - - 8500-4027 LP 8500-4027 110 - 8500-4051 900 - - 8500-8980 900 - 8500-8980 903 851 T 20-38 851 T 20-42 8500-5879 8500-5906 LP 18 8500-5887 LP 8500-5887 110 8500-5887 202 8500-2474 900 8500-2474 902 8500-2474 903 8500-1564 LP 8500-471 8500-687 8500-453 LP - - 8500-4026 LP 8500-4026 110 - 8500-4050 900 - - 8500-8979 900 - 8500-8979 903 851 T 18-38 851 T 18-42 8500-5878 8500-5905 LP 16 8500-5886 LP 8500-5886 110 8500-5886 202 8500-2473 900 8500-2473 902 8500-2473 903 8500-1563 LP 8500-470 8500-686 8500-452 LP - - 8500-4025 LP 8500-4025 110 - 8500-4049 900 - - 8501-0190 900 - 8501-0190 903 851 T 16-38 851 T 16-42 8500-5877 8500-5904 LP 14 8500-5885 LP 8500-5885 110 8500-5885 202 8500-2472 900 8500-2472 902 8500-2472 903 8500-1562 LP 8500-469 8500-685 8500-451 LP - - 8500-4024 LP 8500-4024 110 - 8500-4048 900 - - 8500-8978 900 - 8500-8978 903 851 T 14-38 851 T 14-42 8500-5876 8500-5903 LP 12 8500-5884 LP 8500-5884 110 8500-5884 202 8500-2471 900 8500-2471 902 8500-2471 903 8500-1561 LP 8500-468 8500-684 8500-450 LP - - 8500-4023 LP 8500-4023 110 - 8500-4047 900 - - 8501-0189 900 - 8501-0189 903 851 T 12-38 851 T 12-42 8500-5875 8500-5902 LP 10 8500-5883 LP 8500-5883 110 8500-5883 202 8500-2470 900 8500-2470 902 8500-2470 903 8500-1560 LP 8500-467 8500-683 8500-449 LP - - 8500-4022 LP 8500-4022 110 - 8500-4046 900 - - 8500-8977 900 - 8500-8977 903 851 T 10-38 851 T 10-42 8500-5874 8500-5901 LP 8 8500-5882 LP 8500-5882 110 8500-5882 202 8500-2469 900 8500-2469 902 8500-2469 903 8500-1559 LP 8500-466 8500-682 8500-448 LP - - 8500-4021 LP 8500-4021 110 - 8500-4045 900 - - 8501-0188 900 - 8501-0188 903 851 T 08-38 851 T 08-42 8500-5873 8500-5900 LP taille de boîtier shell size protection plating - 29 ou/or 031 44 - 29 ou/or 031 44 - - - 29 ou/or 031 44 - 29 ou/or 031 44 - 29 ou/or 031 44 - 29 ou/or 031 44 38 42 - E/R /RC écrou nut P/RP P RP A/RA T/RT M/RM G/RG T/RT specification 38 & 42 presseétoupe sealing gland écrou nut désignation designation raccord simple backnut raccord droit à serre-câbles straight cable clamp raccord droit pour potting straight backshell for potting raccord droit intermédiaire straight adaptor raccord droit pour gaine thermorétractable straight backshell for heatshrink sleeving raccord droit démontable pour gaine thermorétractable removable straight backshell for heatshrink sleeving raccord droit démontable pour reprise de tresse et gaine thermorétractable removable straight backshell for screen termination and heatshrink sleeving raccord droit démontable pour reprise de tresse et gaine thermorétractable removable straight backshell for screen termination and heatshrink sleeving J raccord droit à presse-étoupe straight sealing gland backshell EC AC Raccords droits / Straight backshells Potting 47 851 Références des raccords / Backshell ordering information Pour les types de protection voir références page 11 / For plating types see part numbers page 11 Raccords droits / Straight backshells 24 8500-5881 8500-5997 900 - - - 8500-8191A LP - - 22 8500-5880 8500-5996 900 - - - 8500-8190 LP - - 20 8500-5879 8500-5995 900 - - - 8500-8189 LP - - 18 8500-5878 8500-5994 900 - - - 8500-8188 LP - - 16 8500-5877 8500-5993 900 8500-8476 900 - - 8500-8187 LP - - 14 8500-5876 8500-5992 900 8500-8475 900 - - 8500-8186 LP - - 12 8500-5875 8500-5991 900 8500-8474 900 - - 8500-8185 LP - - 10 8500-5874 8500-5990 900 - - - - - - 8 8500-5873 8500-5989 900 - - - - - - taille de boîtier shell size protection plating - 29 ou/or 031 44 - 29 ou/or 031 44 presseétoupe sealing gland écrou nut U/RU Z/RZ désignation designation JC raccord droit court pour reprise de tresse et gaine thermorétractable short backshell for screen termination and heatshrink sleeving raccord pour adaptation d’accessoire au pas électrique straight adaptor for electrical pitch access raccord droit à presse-étoupe et serrecâbles straight sealing gland and cable clamp backshell Raccords droits pour embase 07 / Straight backshells for receptacle 07 8500-381 LP 8500-381 110 8500-381 202 8500-1797 900 - - 8500-474 8500-690 8500-4784 LP 8500-4784 110 - 8500-380 LP 8500-380 110 8500-380 202 8500-1796 900 - - 8500-473 8500-689 8500-4783 LP 8500-4783 110 - 8500-379 LP 8500-379 110 8500-379 202 8500-1795 900 - - 8500-472 8500-688 8500-4782 LP 8500-4782 110 - 8500-378 LP 8500-378 110 8500-378 202 8500-1794 900 - - 8500-471 8500-687 8500-4781 LP 8500-4781 110 - 8500-377 LP 8500-377 110 8500-377 202 8500-1793 900 - - 8500-470 8500-686 8500-4780 LP 8500-4780 110 - 8500-376 LP 8500-376 110 8500-376 202 8500-1792 900 - - 8500-469 8500-685 8500-4779 LP 8500-4779 110 - 8500-375 LP 8500-375 110 8500-375 202 8500-1791 900 - - 8500-468 8500-684 8500-4778 LP 8500-4778 110 - 8500-374 LP 8500-374 110 8500-374 202 8500-1790 900 - - 8500-467 8500-683 8500-4777 LP 8500-4777 110 - 8500-8347 LP 8500-8347 110 8500-8347 202 8500-8351 900 - - 8500-466 8500-682 8500-4776 LP 8500-4776 110 - - 29 ou/or 031 44 - 29 ou/or 031 44 - 29 ou/or 031 44 E/R /RC P RP T/RT raccord simple backnut raccord droit à serre-câbles straight cable clamp raccord droit pour potting straight backshell for potting raccord droit pour gaine thermorétractable straight backshell for heatshrink sleeving EC AC Raccords coudés / Elbow backshells 8500-799 900 8500-799 902 - 8500-3225 900 8500-3225 902 - 8500-3224 900 8500-3224 902 - 8500-796 900 8500-796 902 - 8500-795 900 8500-795 902 - 8500-794 900 8500-794 902 - 8500-793 900 8500-793 902 - 8500-792 900 8500-792 902 - 8500-791 900 8500-791 902 - - 29 ou/or 031 44 EC/RC raccord coudé à serre-câbles elbow cable clamp backshell 48 851 Outillages / Tools Outillage de sertissage Crimping pliers Tailles de contacts Contact sizes Section de câbles / Wire sizes Références / Part numbers mm² AWG pince à sertir / crimping tool positionneur / locator 20 0.93 0.60 0.38 0.21 18 20 22 24 8476-01 (M 22520/2-01) 8365 (M 22520/1-01) 8476-02 (M 22520/2-02) 8365-02 (M 22520/1-02) 16 1.91 1.34 0.93 14 16 18 8365 (M 22520/1-01) 8365-02 (M 22520/1-02) ] ] Outillage d’insertion et d’extraction Insertion and extraction tools Type de contacts Contact types Tailles de contacts Contact sizes Références / Part numbers outil d’insertion / insertion tools outil d’extraction / extraction tools à sertir crimp 20 8500-29B* 8500-36A 16 8500-39 8500-38A pour connexion enroulée for wire-wrap 20 8500-31 8500-31 16 8500-39 ou/or 8500-37 8500-37 Tube de rechange pour outil / Square tube for tool : • 8500-36A : ref. 8500-1163 • 8500-38A : ref. 8500-1486 021 * Sauf arrangements 8-2, 8-3, 8-4, 12-14 : outil 8500-93B * Except 8-2, 8-3, 8-4, 12-14 contact layouts : insertion tool 8500-93B Obturateurs Filler plugs Tailles de contacts Contact sizes Références / part numbers Couleur / Colour Profil / Profile 20 8500-4144 gris / grey 16 8500-479 bleu / blue 20 8500-4144 A (MS 3187 A 20) rouge / red 16 8500-4267 (MS 3187-16) bleu / blue 49 851 Outils de sertissage Crimping pliers 8476-01 (M 22520/2-01) avec / with 8476-02 (M 22520/2-02) 8365 (M 22520/1-01) avec / with 8365-02 (M 22520/1-02) Outils de d’insertion Insertion tools 8500-39 8500-29B 50 851 Outils d’extraction Extraction tools 8500-36 A (Contact à sertir #20 / Crimp contact #20) 8500-38 A (Contact à sertir #16 / Crimp contact #16) 8500-31 (pour connexion enroulée #20 / for wire-wrap #20) 8500-37 (pour connexion enroulée #16 / for wire-wrap #16) Accessoires Accessories 8498-04 Clé à sangle pour serrage des accessoires arrière Strap backshell tightening spanner 8500-30 Support de serrage Tightening support 51 851 Notice de câblage / Wiring instructions Préparation des câbles / cable preparation Contacts à sertir Crimp contacts Dénudage Stripping • Apporter le plus grand soin à cette opération. Utiliser une pince à dénuder appropriée à la section du câble et en parfait état. • Afin de conserver toutes les caractéristiques d’étanchéité du connecteur et permettre un câblage rationnel, les fils doivent avoir les dimensions ci-dessous : • Taux de remplissage conseillé : - 050 % Ø maxi - 050 % Ø mini - 100 % Ø moyen • Contacts de taille 20 pour les câbles de : - Ø sur gaine ≤ à 2 mm, dénuder sur une longueur de 4,5 mm - Ø sur gaine > à 2 mm, dénuder sur une longueur de 7 mm. • Contacts de taille 16, dénuder le câble sur 6 mm. Raccordement câblescontacts • Enfiler le câble dans le fût du contact et s’assurer que les brins du câble sont apparents dans le trou de visite. Utilisation de l’embout réducteur • Contacts de taille 20, si le câble a une section inférieure à 0,21 mm2, il est indispensable d’intercaler un embout réducteur : réf. 8500-781. • Contacts de taille 16, embout réducteur : réf. 8500-1985, si le câble a une section égale à 0,60 mm2. contact / contact embout / sleeve câble / cable • This operation should be carried out with great care. Use stripping pliers which are in good condition and which are designed for use with the size of wire being stripped. • In order to maintain the connector’s excellent sealing characteristics and, at the same time, meet the highest cabling standards the wires should have the following external sheath dimensions : • Recommended loading : - 050 % with max. diam. wires - 050 % with min. diam. wires - 100 % with medium size wires. • Size 20 contacts for cables : - when Ø over insulation ≤ 2 mm strip to a 4.5 mm length - when Ø over insulation > 2 mm strip to a 7‑mm length. • Size 16 contacts, strip the cable to a length of 6 mm. Cable-contact assembly • Insert the wire into the crimp barrel and ensure that it has penetrated correctly by checking that it may be seen through the lateral hole in the barrel. Reducing sleeve • If a wire with a cross sectional area of less than 0.21 mm2 is used with a size 20 contact, it will be necessary to use a reducing sleeve : ref. 8500-781. • Wires of cross sectional area of 0.6 mm2 may be used with size 16 contacts by using a reducing sleeve, ref. 8500-1985. Taille des contacts Ø sur gaine min. max. 20 16 1.20 1.60 2.11 2.80 Contacts size Ø over sheath min. max. 20 16 1.20 1.60 2.11 2.80 52 851 Sertissage des contacts / Contact crimping • Avec pince à sertir MS 22520/1-01 référence Souriau 8365 et tourelle MS 22520/1-02 8365-02: - position «rouge» pour contact taille 20 - position «bleue» pour contact taille 16. • Avec pince à sertir MS 22520/2-01 référence Souriau 8476-01 et positionneur MS 22520/2-02 8476- 02 : - contact taille 20 uniquement. Nota : ne pas utiliser avec embout réducteur. Les pinces doivent être utilisées côté poinçons. • Presser sur les poignées de la pince jusqu’au déclic final, relâcher ; la pince doit s’ouvrir d’elle-même. • Introduire l’ensemble fil et contact, ou fil embout réducteur et contact entre les 4 poinçons jusqu’à venir en butée dans le positionneur. • Presser à fond jusqu’au déclic final, la pince doit s’ouvrir une fois le sertissage effectué. • Extraire fil et contact serti et contrôler l’aspect du sertissage. • With crimping pliers MS 22520/1-01 Souriau part number 8365 and turret MS 22520/1-02 8365-02 : - «red» position for size 20 contacts - «blue» position for size 16 contacts. • With crimping pliers MS 22520/2-01 Souriau part number 8476-01 and locator MS 22520/2-02 8476-02 : - for size 20 contacts only. Note : not be used with reducing sleeve. Squeeze pliers firmly until a click is heard, the pliers should spring open when the ratched mechanism is released. • Hold indentor side up-insert the wire-contact assembly or mire-reducing sleeve-contact assembly between the four indentors, ensuring that the contact bottoms in the locator. • Fully close the jaws, once the contact is crimped the pliers must spring open remove wire + crimped contact, check crimp aspect. 8365 8476-01 53 851 Insertion des contacts / Crimp contact insertion Avant les opérations suivantes, démonter et enfiler sur les câbles l’accessoire arrière du connecteur. Outils d’insertion • Contacts taille 20* : pince 8500-29B • Contacts taille 16 : outil 8500-39. Utilisation des outils d’insertion Engager manuellement le contact dans l’alvéole de l’isolant. • Contacts de taille 20 : prendre le fil entre les 2 becs de la pince en butée sur l’arrière de la jupe du contact. • Contacts de taille 16 : mettre la partie sertie du contact dans le bec de l’outil, l’extrémité de celui-ci venant en butée sur la collerette principale du contact. Introduire chaque contact dans le logement de l’isolant en poussant dans l’axe jusqu’à l’accrochage du contact dans le clip. Obturateurs Lorsque certains contacts ne sont pas câblés, afin de conserver les caractéristiques d’étanchéité, il est indispensable de prévoir un obturateur à l’arrière du contact : le contact doit être monté dans son alvéole avant l’obturateur. * Sauf arrangements 8-2, 8-3, 8-4, 12-14 : outil 8500-93B First disassemble and slide connector rear accessory over cables. Insertion tools • Size 20 contacts* : pliers 8500-29B • Size 16 contacts : tool 8500-39. Use of insertion tools Manually insert the contact into the desired insert cavity. • Size 20 contacts : insert the wire between the pliers jaws, the tip of the jaws butting the contact shoulder. • Size 16 contacts : introduce the contact crimped section in the tool jaws, the tip of the tool butting against the contact main flange. Introduce contacts one by one in insert cavities pushing straight in until the contact snaps into position and the clip ensures contact retention. Filler plugs Where certain contacts are unwired and where it is necessary to fully maintain the connector’s sealing characteristics, a filler plug must be used. Note that the contact must be inserted before the filler plug. * Except 8-2, 8-3, 8-4, 12-14 contact layouts : tool 8500-93B contact / contact fil / wire outil / tool Mise en place du contact dans l’outil Contact position in the tool sens du montage direction of filler plug insertion 54 851 Extraction des contacts à sertir / Crimp contact extraction Outils d’extraction Tous les contacts pour isolants à clips sont démontables à l’aide d’un outil semi-automatique : • contacts taille 20 : outil référence 8500-36A • contacts taille 16 : outil référence 8500-38A. Avant les opérations suivantes, démonter et faire glisser sur les câbles l’accessoire arrière du conducteur. • Ne pas agir sur le poussoir de l’outil. • Introduire par l’avant du connecteur (côté accouplement) le tube de l’outil sur le contact mâle ou femelle jusqu’au 1er repère pour les contacts mâles et au 2ème repère pour les contacts femelles. • Cette opération doit être effectuée délicatement, dans l’axe du contact à l’aide d’un léger mouvement rotatif. • Extraire le contact en actionnant le poussoir, retirer l’outil avec précaution et tirer sur le fil pour dégager l’ensemble fil-contact. Nota : les outils possèdent un système à ressort réglable (par le bouton moleté arrière), permettant ainsi le décrochage automatique du contact. Extraction tools All contacts for use in insulators with clips are extracted using a semi-automatic tool : • size 20 contacts : tool type 8500-36A • size 16 contacts : tool type 8500-38A. First dissassemble and slide connector rear accessory over cables. • Do not operate the tool slide button. • Bring the tool tip over the male or female contact to be removed from connector front (mating face) as far as the first mark for male contacts and the second mark for female contacts. • This operation, should be carried out delicately in a direction parallel to the contact centre line with a light turning action. • Extract contact pushing the slide button fully forward, carefully remove tool and pull wire to release the wire-contact assembly. Note : tools have an adjustable spring system (rear knurled knob) also for automatic contact disengagement. 1er repère first mark 2ème repère second mark 55 851 Schémas d’implantations pour circuits imprimés / Co-ordinates for PC tail contacts Isolant mâle, vue face arrière (côté soudure) Terminations viewed from male rear face (soldering side) Ø trous de perçage 0,90 mm min. (# 20) + trous de perçage 1,3 mm min. (# 16) tolérance de positionnement des trous sur carte Hole size : 0.90 mm min. (# 20) + Hole sizes : 1.3 mm min. (# 16) hole position tolerance. O Ø 0.10 14-5 12-3 12-8 12-10 14-12 14-15 14-18 10-6 10-7 10-98 12-2 8-2 8-4 8-3 8-3A/8-98 8-33 12-14 56 851 16-8 16-23 16-26 18-11 14-19 18-30 18-32 57 851 20-16 20-24 20-25 20-27 20-39 20-41 58 851 22-21 22-32 22-34 22-36 22-55 59 851 24-61 60 851 Prise largable push-pull / Push-pull locking plug Caractéristiques générales • Verrouillage : en poussant sur la bague • Déverrouillage : par traction sur la tirette de largage • Montage : sur toutes les embases 851 • Arrangements et contacts à sertir et à souder : (voir pages 10 et 14/15) • Autres caractéristiques : (voir page 9) Racine / Basic series version à sertir - crimp version 856 version à souder - solder version 856 06 06 R E • • • • • • • • P P • • 50 50 • • • • Type de boîtier / Shell type 06 08 Type de raccord / Backshell type R/E RC/EC RA/A RP/P RT/T RM/M *RT/*T RC/EC Taille de boîtier / Shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Arrangements / Contact layouts Voir tableau des arrangements page 14/15 - See table page 14/15 Type de contact/ Contact type P = mâle / male - S = femelle / female Positionnement / Orientation Normal (n’apparaît pas dans la référence) w, x, y, z - voir tableau page 16 Normal (not included in part number) w, x, y, z - see table page 16 Indice obligatoire / Obligatory suffix Spécification / Specification 07 08 09 General characteristics • Locking : by pushing on the coupling nut • Unlocking : by pulling a lanyard • Mounted : on all 851 receptacles • Layouts and crimp solder contacts : (see pages 10 and 14/15) • Other characteristics : (see page 9) Références / Ordering information fiche droite - plug for use with straight backshell fiche coudée - plug for use with 90° backshell raccord simple / backnut raccord droit à serre-câbles / straight cable clamp raccord droit intermédiaire / straight adaptor raccord droit pour potting / straight backshell for potting raccord droit pour gaine thermorétractable / straight backshell for heatshrink sleeving raccord droit démontable pour gaine thermorétractable straight removable backshell for heatshrink sleeving spécification 38 ou/or 42: raccord droit démontable pour reprise de tresse et gaine thermorétractable / straight removable backshell for screen termination and heatshrink sleeving raccord coudé à serre-câbles / 90° cable clamp protection cadmié vert olive (version à souder) olive-green cadmium plating (solder version) protection cadmié vert olive (version à sertir) olive green cadmium plating (crimp version) protection cadmié blanc (version à sertir et à souder) white cadmium plating (crimp and solder version) 61 851 Taille de boîtier Shell size Dimensions 8 10 12 14 16 18 20 22 24 A 19.50 22.80 27.30 30.80 34.00 37.00 41.00 44.50 49.20 B 24.95 28.25 32.55 36.05 39.05 42.05 45.80 49.20 53.45 06 R E 32.00 32.00 32.00 32.00 32.00 32.00 31.80 31.80 31.80 06 RC E 47.30 47.30 47.30 47.30 50.50 50.50 49.90 49.90 49.90 06 RP E 42.10 42.10 42.10 42.10 42.10 45.40 49.80 49.80 49.80 06 RA E 41.00 41.00 41.00 41.00 41.00 41.00 43.00 43.00 43.20 06 RM E 50.00 50.00 50.00 50.00 50.00 50.00 51.70 51.70 51.70 06 RT spécifications 38 ou/or 42 E 50.00 50.00 50.00 50.00 50.00 50.00 51.70 51.70 51.70 08RC E 50.10 52.60 54.90 58.50 60.80 65.00 68.80 71.20 76.20 D max 16.00 18.00 19.50 22.00 23.50 25.00 26.50 28.00 31.00 Nota : Encombrements des raccords, se reporter aux dimensions des pages précédentes Note : For backshells dimensioning, refer to values given in preceding pages Note : toutes les dimensions sont en mm / all dimensions are in mm 62 851 Connecteurs filtres 8F51 / 8F51 filter connectors Généralités Ces connecteurs sont dérivés des spécifications standards MIL-DTL-26482 G série 1 - NFC 93422 (HE 301 B) - VG 95328. Ils sont interchangeables en fixation et intermariables avec les connecteurs standards. Différents types de filtres peuvent équiper ces connecteurs et permettent ainsi de supprimer les interférences RFI/EMI dans différentes gammes de fréquences. L’utilisation de ces connecteurs à filtres performants incorporés offre les avantages suivants : • Filtrage efficace des parasites à l’entrée ou à la sortie d’un équipement électronique, • Ecran de blindage du coffret conservé, • Encombrement et coût plus réduit par rapport à l’utilisation de filtres individuels câblés à l’arrière du connecteur, • Choix de 4 types de contacts standards - merci de nous consulter pour tout autre valeur de capacitance et type de filtre, • Possibilité de mixage de filtres dans le même arrangement : contacts filtrés, non filtrés et liés à la masse. La version adaptateur, également disponible, permet d’équiper simplement les systèmes existants non filtrés. Caractéristiques électriques • Intensité max. par contact 7.5 A (#20); 13 A (#16) • Tension max. de service 200 Vdc / 120 Vac • Types de filtre standard C, Pi • Valeur de capacitance typ. de 500 pF à 200 nF • Performance filtre Jusqu’à -60dB / -80dB Consulter pour ce produit notre département CONNECTEURS FILTRES. General information These connectors are derived from standard specifications MIL-DTL-26482 G series 1 - NFC 93422 (HE 301 B) - VG 95328. They are intermountable and intermateable with standard connectors. Different types of filters may be fitted in these connectors to eliminate RFI/EMI in different frequency ranges. Using built-in High Performance EMI filters offers the following advantages : • Efficient filtering on interferences at electronic equipment input or output, • Case screen-shielding efficiency is maintained, • Cost and volume saving as compared with the use of discrete filters wired down the line, • 4 types of standard filters are available - Please consult us for other capacitance and filter types, • Combinations of mixed filter in the same layout: filtered, non-filtered and grounded contacts available. An adaptor version is also a simple technique to equip existing systems which do not incorporate filters. Electrical characteristics • Max. current rating per contact 7.5 A (#20); 13 A (#16) • Max. operating voltage 200 Vdc / 120 Vac • Standard filter types C, Pi • Capacitance range typically 500 pF - 200 nF • Filter performance up to -60dB / -80dB For this product, consult our FILTER CONNECTOR department. 63 851 Connecteurs spécifiques et accessoires de connexion SNC SNC specific connectors and connection accessories Désignations Designations Références Part numbers • Traversée de cloison à collerette carrée, broches, douilles Boîtiers 8 à 24 : arrangements 8.03 / 10.06 / 12.10 / 14.19 / 16.26 / 18.32 / 20.41 / 22.55 / 24.61 Positionnements : N & W Protections : 085 cadmiage vert / 112 oxydation anodique noire brillante • Square flange through bulkhead, pins, sockets Shell sizes 8 to 24 : layouts 8.03 / 10.06 / 12.10 / 14.19 / 16.26 / 18.32 / 20.41 / 22.55 / 24.61 Insert rotations : N & W Plating : 085 green cadmium / 112 black anodized EC 52 B • Raccord coudé à serre-câbles à encombrement réduit, pour fiche 08RC Boîtiers 12, 14, 16, 18 et 22 • Short profile 90° backshell with cable clamp for 08 RC plug Shell sizes 12, 14, 16, 18 and 22 SN 556 • Connecteur fiche et embase Boîtier 24 équipé de 3 contacts # 16 - 7 contacts # 20 - 1 contact coaxial 50 Ω (pour câble KX 15) • Plug and receptacle connector Shell size 24 : contact layout = 3 contacts # 16, 7 contacts # 20, 1 coaxial contact 50 Ω (for KX15 cable) SN 775 P SN 775 S • Fiche shunt • Shunt plug SN 901 • Raccord droit en deux parties avec presse-étoupe et brides de serrage Boîtiers 8, 10 et 16 • Straight two-piece backshell with sealing gland and cable strap Shell sizes 8, 10 and 16 SN 946 • Fiche équipée d’une bague de verrouillage à oreilles Boîtiers 20, 22 et 24 • Plug with flanged coupling nut Shell sizes 20, 22 and 24 SN 1167 • Prolongateur de test, broches, douilles Boîtiers 8 à 24, arrangements avec contacts de # 20 • Cable connecting test connector, pins, sockets Shell sizes 8 to 24, arrangements with size contacts # 20 SN 1206 • Bague à oreilles avec vis pointeau adaptable sur fiche 851 Boîtiers 8 à 24 • Ring with lugs with cone-pointed grub screws fitting 851 plug Shell sizes 8 to 24 SN 1277 • Raccord coudé fermé avec cheminée pour reprise de tresse par magnétostriction Boîtiers 8 à 24 • Elbow backshell with closing sleeve for shield termination by magnaforming Shell sizes 8 to 24 SN 1533 • Embase type 07A à picots droits, démontage par l’avant Arrangements : 14.19 (N) / 16.26 (N) / 18.32 (N, X) / 20.41 (N, W, X, Y) / 22.55 (N, W, X, Y, Z) / 24.61 (N) Protection : cadmiage passivé vert • Jam nut receptacle with front release straight PC tails Layouts : 14.19 (N) / 16.26 (N) / 18.32 (N, X) / 20.41 (N, W, X, Y) / 22.55 (N, W, X, Y, Z) / 24.61 (N) Plating : passivated green cadmium SN 0378 Autres arrangements, nous consulter / Other layouts, please consult us 64 Notes / Notes 65 851 RJ45 Présentation / Presentation Le connecteur SOURIAU 851 RJ45 est une solution renforcée pour les applications de téléchargement / chargement de données en environnements sévères. Disponible en taille 18, ce connecteur existe en divers types de boîtiers et avec différentes terminaisons: Fiche avec cordon RJ45, traversée de cloison ou à souder pour les embases à collerette carrée et à fixation par écrou. Les principaux avantages de ce produit : • Une solution Ethernet cat5e - 10 Base T, 100 Base TX, ou 1000 Base T • Excellente résistance aux impacts & aux chocs - Boîtier renforcé • Connexion facile, fiable & sécurisée • Idéal pour les applications intérieures / extérieures - niveau d’étanchéité IP67 SOURIAU 851 RJ45 connector is a ruggedized solution for downloading / uploading data applications in harsh environments. Available in shell size 18, this connector offers multiple configurations and terminations: Cable pig tail for plug, feed through and solder out for both square flange and jam nut receptacle. Main advantages of this product : • A cat5e Ethernet solution - 10 Base T, 100 Base TX, or 1000 Base T capable • High impact & shock resistance - Ruggedized housing • Easy, reliable & secure mating • Suitable for Indoor / Outdoor applications - IP67 sealing level 66 851 RJ45 Mécaniques Matières • Boîtier Alliage d’aluminium • Insert Thermoplastique • Contacts Alliage cuivre Protection • Boîtier Cadmié vert olive Oxydation anodique noire Nickelé • Contacts Or Mécanique • Selon MIL-DTL-26482, 500 manoeuvres Mechanical Material • Shell Aluminium alloy • Insert Thermoplastic • Contacts Copper alloy Plating • Shell Olive drab cadmium Black anodized Nickel • Contacts Gold Mechanical • per MIL-DTL-26482, 500 mating cycles Electriques 10 BaseT, 100 Base TX et 1000 BaseT Cat 5e selon TIA/EIA 568A/B Electrical 10 BaseT, 100 Base TX and 1000 BaseT Cat 5e per TIA/EIA 568A/B Climatiques • Etanchéité IP67 avec un bouchon • Température -40°C à +85°C • Résistance aux fluides : selon MIL-DTL-26482 avec un bouchon Climatic • Sealing IP67 with protective cap • Temperature -40°C to +85°C • Fluid resistance : per MIL-DTL-26482 with protective cap Caractéristiques techniques / Technical characteristics Références / Ordering information Racine / Basic series 851 Ruggedized Receptacle connectors 00 00 8 J C S N OD - - - Type de boîtier / Shell type 00 01 07 06 Type de raccord / Backshell type 00 RC RT Taille de boîtier / Shell size 8 Insert / Insert J Arrangements / Layouts F S CP Style de contact / Contact style SP Orientation / Polarization N Normal W, X, Y, Z autre orientations / other polarizations Protection / Plating OD 031 44 Spécification / Specification Nous consulter pour une configuration personnalisée / Consult factory for custom configuration Embase à collerette carrée (acceptant un raccord) Square flange receptacle (accepting backshell) Prolongateur / Cable connecting receptacle Embase à fixation par écrou / Jam nut receptacle Fiche (acceptant un raccord) / Plug (accepting backshell) Pas de raccord / no backshell Serre câbles droit / Straight cable clamp Raccord droit pour gaine thermorétractable / Straight backshell for heat shrink tubing RJ45 (size 18) RJ45 Traversée de cloison / Feedthrough A souder / Solder Embase avec cordon RJ45 / Pig tail receptacle Fiche avec cordon RJ45 / Pig tail plug Embase / Receptacle Fiche / Plug Protection vert olive cadmiée / Olive drab cadmium Oxydation anodique noire / Black anodized Nickelé / Nicke 67 851 RJ45 Embase RJ45 à collerette carrée à souder Square flange RJ45 feedthrough solder out Shell type ‘A’ ‘B’ Aluminium 22.98 1.32 Encombrements / Dimensions Embase RJ45 à collerette carrée Square flange RJ45 feedthrough Shell type ‘A’ ‘B’ Aluminium 30.91 1.32 Embase RJ45 à fixation par écrou Jam nut RJ45 feedthrough Shell type ‘A’ ‘B’ Aluminium 23.39 2.64 PIN I □ 27.0 44.1 ‘A’ ‘B’ PIN I □ 32.3 PIN I 44.1 ‘A’ ‘B’ PIN I ø 44.2 PIN I □ 27.0 10.7 ‘A’ ‘B’ 30.8 ø 1.4 □ 32.3 Note : toutes les dimensions sont en mm / all dimensions are in mm Fiche avec cordon RJ45 Cable plug RJ45 Shell type ‘A’ Aluminium 304.8 PIN I 76.0±6 ‘A’ 52.4 PIN I 25.4±6.3 Master key Livrée en standard avec un câble de dimension ‘A’ / Come with a cable - dimension ‘A’ - in standard. 68 851 RJ45 Embase à collerette carrée avec cordon RJ45 Square flange RJ45 feedthrough Pig tail Embase à fixation par écrou avec cordon RJ45 Jam nut RJ45 feedthrough Pig tail Shell type ‘A’ ‘B’ ‘C’ Aluminium 30.91 1.32 304.8±25.4 Shell type ‘A’ ‘B’ ‘C’ Aluminium 23.39 2.64 304.8±25.4 PIN I 25.4 ‘A’ ‘B’ End ‘B’ PIN I ‘C’* 25.4 End ‘A’ PIN I 25.4 ‘A’ ‘B’ End ‘B’ PIN I ‘C’* 25.4 End ‘A’ Note : toutes les dimensions sont en mm / all dimensions are in mm * Longueur du câble mesurée à partir de l’avant de la collerette / Cable length is measured from the front face of the flange. Embase RJ45 à fixation par écrou à souder Jam nut RJ45 feedthrough solder out Shell type ‘A’ ‘B’ Aluminium 15.27 2.64 PIN I 10.7 ‘A’ ‘B’ 24.6 ø 44.2 ø 1.4 Livrée en standard avec un câble de dimension ‘C’ Come with a cable - dimension ‘C’ - in standard. Livrée en standard avec un câble de dimension ‘C’ Come with a cable - dimension ‘C’ - in standard. Perçage de cloison Panel cut-out Embase à collerette carrée Square flange receptacle Embase à fixation par écrou Jam nut receptacle Epaisseur maximum du panneau : 4.75 mm Maximum panel thickness : 4.75 mm Epaisseur maximum du panneau : 0.41mm min / 3.18 mm max Maximum panel thickness : 0.41 mm min / 3.18 mm max ø 30.5 □ 27.9 4 x 2.5 Rear mounting ø 32.1 30.55 69 851 USB Présentation / Presentation Le connecteur SOURIAU 851 USB est une solution renforcée pour les applications de téléchargement / chargement de données en environnements sévères. Disponible en taille 16, ce connecteur existe en divers types de boîtiers et avec différentes terminaisons: Fiche avec cordon USB, traversée de cloison ou à souder pour les embases à collerette carrée et à fixation par écrou. Les principaux avantages de ce produit : • Excellente résistance aux impacts & aux chocs - Boîtier renforcé • Connexion facile, fiable & sécurisée • Idéal pour les applications intérieures / extérieures - niveau d’étanchéité IP67 SOURIAU 851 USB connector is a ruggedized solution for downloading / uploading data applications in harsh environments. Available in shell size 16, this connector offers multiple configurations and terminations: Cable pig tail for plug, feed through and solder out for both square flange and jam nut receptacle. Main advantages of this product : • High impact & shock resistance - Ruggedized housing • Easy, reliable & secure mating • Suitable for Indoor / Outdoor applications - IP67 sealing level 70 851 USB Mécaniques Matières • Boîtier Alliage d’aluminium • Insert Thermoplastique • Contacts Alliage cuivre Protection • Boîtier Cadmié vert olive Oxydation anodique noire Nickelé • Contacts Or Mécanique • Selon MIL-C-26484, 500 manoeuvres Mechanical Material • Shell Aluminium alloy • Insert Thermoplastic • Contacts Copper alloy Plating • Shell Olive drab cadmium Black anodized Nickel • Contacts Gold Mechanical • per MIL-C-26484, 500 mating cycles Electriques 10 BaseT, 100 Base TX Cat 5e selon TIA/EIA 568A/B Electrical 10 BaseT, 100 Base TX Cat 5e per TIA/EIA 568A/B Climatiques • Etanchéité IP67 avec bouchon • Température de -40°C à +85°C • Résistance aux fluides : selon MIL-C-26484 avec bouchon Climatic • Sealing IP67 with protective cap • Temperature range : -40°C to +85°C • Fluid resistance : per MIL-C-26484 with protective cap Caractéristiques techniques / Technical characteristics Références / Ordering information Racine / Basic series 851 Ruggedized Receptacle connectors 00 00 6 A C S N OD - - - Type de boîtier / Shell type 00 01 07 06 Type de raccord / Backshell type 00 RC RT Taille de boîtier / Shell size 6 Insert / Insert A B Arrangements / Layouts F S CP Style de contact / Contacts style SP Orientation / Polarization N Normal W, X, Y, Z autres orientations / other polarizations Protection / Plating OD 031 44 Spécification / Specification Nous consulter pour une configuration personnalisée / Consult factory for custom configuration Embase à collerette carrée (acceptant un raccord) Square flange receptacle (accepting backshell) Prolongateur / Cable connecting receptacle Embase à fixation par écrou / Jam nut receptacle Fiche (acceptant un raccord) / Plug (accepting backshell) Pas de raccord / no backshell Serre câbles droit / Straight cable clamp Raccord droit pour gaine thermorétractable / Straight backshell for heat shrink tubing USB (size 16) USB Type A USB Type B Traversée de cloison / Feedthrough A souder / Solder Embase avec cordon USB / Pig tail receptacle Fiche avec cordon USB / Pig tail plug Embase / Receptacle Fiche / Plug Protection vert olive cadmiée / Olive drab cadmium Oxydation anodique noire / Black anodized Nickelé / Nickel 71 851 USB Embase USB à collerette carrée à souder Square flange USB feedthrough solder out Shell type ‘A’ ‘B’ Aluminium 15.16 1.32 Encombrements / Dimensions Embase USB à collerette carrée Square flange USB feedthrough Shell type ‘A’ ‘B’ Aluminium 24.82 1.32 Embase USB à fixation par écrou Jam nut USB feedthrough Shell type ‘A’ ‘B’ Aluminium 17.30 2.64 PIN I □ 24.6 37.8 ‘A’ ‘B’ □ 30.9 PIN I PIN I 37.8 ‘A’ ‘B’ ø 41.0 PIN I PIN I □ 30.9 10.7 ‘A’ ‘B’ 24.5 ø 1.6 □ 24.6 Note : toutes les dimensions sont en mm / all dimensions are in mm Fiche avec cordon USB USB cable plug Shell type ‘A’ Aluminium 304.8 PIN I 12.7±6.35 ‘A’ 38.2 50.8 Master key La fiche USB standard est livrée avec un câble de dimesion ‘A’. Standard USB plug come with a cable - dimension ‘A’. 65.5 USB-A plug USB-A receptacle 72 851 USB Embase USB à fixation par écrou à souder Jam nut USB feedthrough solder out Shell type ‘A’ ‘B’ Aluminium 7.65 2.64 PIN I ø 41.0 ‘A’ ‘B’ 18.3 10.7 Embase à collerette carrée avec cordon USB Square flange USB feedthrough Pig tail Embase à fixation par écrou avec cordon USB Jam nut USB feedthrough Pig tail Shell type ‘A’ ‘B’ ‘C’ Aluminium 24.82 1.32 304.8±25.4 Shell type ‘A’ ‘B’ ‘C’ Aluminium 17.30 2.64 304.8±25.4 PIN I 25.4 ‘A’ ‘B’ PIN I ‘C’* 25.4 □ 30.9 □ 24.6 PIN I 25.4 ‘A’ ‘B’ PIN I ‘C’* 25.4 ø 41.0 Note : toutes les dimensions sont en mm / all dimensions are in mm *Longueur du câble mesurée à partir de l’avant de la collerette / Cable length is measured from the front face of the flange. Perçage de cloison Panel cut-out Embase à collerette carrée Square flange receptacle Embase à fixation par écrou Jam nut receptacle Epaisseur maximum du panneau / Maximum panel thickness : - Montage par l’avant / Front mounting: 3.20 mm - Montage par l’arrière / Rear mounting : 2.49 mm Epaisseur maximum du panneau : 3.20 mm Maximum panel thickness : 2.49 mm ø 28.45 ø 4 x 3.15 □ 24.6 Panel mounting ø 32.1 □ 30.4 Livrée en standard avec un câble de dimension ‘C’ Come with a cable - dimension ‘C’ - in standard. Livrée en standard avec un câble de dimension ‘C’ Come with a cable - dimension ‘C’ - in standard. 73 8XE Présentation / Presentation SOURIAU overmolded 851 connector utilises high impact glass filled plastic offering a great impact & shock resistance as well as an ergonomic shape of the coupling ring. Suitable backshell in same plastic material allows IP68 sealing level. • High impact & shock resistance (drop & crush resistance • Easy, reliable & secure mating • Excellent sealing performance : IP68 (120 hours under 15 m water ) /IP69K • High salt spray resistance • Enhanced cable sealing • Intermateable & interchangeable with MIL-DTL-26482 • Design flexibility Le connecteur 851 surmoulé SOURIAU est en plastique, chargé verre, haute performance offrant une excellente résistance aux impacts & chocs ainsi qu’une forme ergonomique de la bague de verrouillage. Le raccord, utilisant la même matière plastique permet d’obtenir un niveau d’étanchéité IP68. • Excellente résistance aux impacts & aux chocs (aux chutes & à l’écrasement) • Connexion facile, fiable & sécurisée • Excellentes performances d’étanchéité IP68 (120 heures sous 15 m d’eau) / IP69K • Excellente résistance au brouillard salin • Excellente étanchéité sur le câble • Intermariable & interchangeable avec les connecteurs MIL-DTL-26482 • Flexibilité de configuration 74 8XE Mécaniques • Endurance • Boîtier • Insert • Contacts • Enveloppe extérieure Plastique chargé verre haute résistance • Joint bague de verrouillage Teflon sur silicone Mechanical • Durability • Shell • Insert • Contacts • Housing • Coupling ring seal Electriques • Résistance d’isolement 5000 MΩ • Tension de tenue 2300 V • Résistance contact 3 MΩ • Intensité admissible par contact Taille16 : 13 A / Taille 20 : 7.5 A Electrical • Insulation resistance 5000 MΩ • Dielectric withstanding voltage 2300 V • Contact resistance 3 MΩ • Current rating per contact Size 16: 13 A / Size 20: 7.5 A Climatiques • Température d’utilisation -55°C à +125°C • Etanchéité Interface IP68 (jusqu’à 120 heures sous 15 mètres d’eau) • Résistance aux produits chimiques selon MIL-DTL-26482 Série 1 Climatic • Working temperature -55°C to +125°C • Sealing Interfacial IP68 (up to 120 hours under 15 meters of water) • Resistance to chemicals in accordance with MIL-DTL-26482 Series 1 Acceptance câbles • Câble Gauge 14 max. • Diamètre gaine extérieure: Toutes tailles jusqu’à 11.17 mm Cable acceptance • Primaries wire Gauge 14 max. • Outer jacket all popular sizes up to 11.17 mm 500 manoeuvres min. Alliage d’aluminium - anodisé dur Elastomer néoprène Alliage de cuivre - protection or 500 mating min. Aluminium alloy - hard anodized Neoprene elastomer Copper alloy with gold plating High impact glass filled plastic Teflon over silicone Références / Ordering information Racine / Basic series 8XE Connecteur pour environnment EXTREME / connector for EXTREME environment 06 - 16 8 P - BL V8 - - - Type de boîtier / Connector type 01 Prolongateur / Cable connecting receptacle 06 Fiche / Plug Type de contact / Contact type Pas de digit / No digit à souder / to solder R à sertir / to crimp Taille de boîtier / Shell size 10, 12, 14, 16, 20, 22 Arrangements / Layouts Voir page suivante / See next page Sexe du contact / Contact gender P Mâle / male S Femelle / female Orientations / Insert orientations Pas de digit / No digit Normal (n’apparaît pas dans lé référence) / Standard (not included in part number) W, X, Y, Z autres orientations / other orientations Couleur / Color Pas de digit / No digit Gris / Mink (standard) BL Bleu / Blue YE Jaune / Yellow RE Rouge / Red Autres couleurs disponibles / Others available Specification / Design variation V8 Boîtier renforcé en taille 16 & 20 / ruggedized shells in size 16 & 20 AA Boîtier inox renforcé en taille 16 & 20 (Ø câble 8 mm) / ruggedized stainless steel shells in size 16 & 20 (cable Ø 8 mm) Diamètre du câble / Cable diameter Personnalisation possible / Custom available Caractéristiques techniques / Technical characteristics 75 8XE 10 6 6 Ø 1 (#20) 7 7 Ø 1 (#20) 98 6 Ø 1 (#20) 12 3 3 Ø 1.6 (#16) 8 8 Ø 1 (#20) 10 10 Ø 1 (#20) 14 14 Ø 1 (#20) 2 2 Ø 1.6 (#16) 12 8 Ø 1 (#20) 4 Ø 1.6 (#16) 15 14 Ø 1 (#20) 1 Ø 1.6 (#16) 18 18 Ø 1 (#20) 19 19 Ø 1 (#20) 5 5 Ø 1.6 (#16) 16 8 8 Ø 1.6 (#16) 23 22 Ø 1 (#20) 1 Ø 1.6 (#16) 26 26 Ø 1 (#20) 16 16 Ø 1.6 (#16) 39 37 Ø 1 (#20) 2 Ø 1.6 (#1.6) 41 41 Ø 1 (#20) 24 24 Ø 1 (#20) 25 25 Ø 1 (#20) 36 36 Ø 1 (#20) 55 55 Ø 1 (#20) 32 32 Ø 1 (#20) 34 34 Ø 1 (#20) 21 21 Ø 1.6 (#16) 27 27 Ø 1 (#20) 14 20 Arrangements / Contact layouts Vue de face avant isolant mâle / Viewed from front face of male insulator 22 76 8XE Note : toutes les dimensions sont en mm / all dimensions are in mm Encombrements / Dimensions Fiche / Plug Shell sizes Ø A B C 10 24.9 51.2 104.5 12 27.9 51.2 103.7 14 33.0 57.6 110.8 16 36.2 63.9 122.2 20 43.7 108.4 197.1 22 48.8 91.4 184.1 16 specif.V8 41.9 83.4 172 20 specif. V8 47 91.4 184.2 Orientations Viewed from front face of male insulator (receptacle or plug) Shell sizes Layouts Angle in degrees W X Y Z 10 6 90 - - - 7* 90 - - - 98 90 180 240 270 12 3 - - 180 - 8 90 112 203 292 10 60 155 270 295 2 - - - - 14* 45 14 5 40 92 184 273 12 43 90 - - 15 17 110 155 234 18 15 90 180 270 19 30 165 315 - 16 8 54 152 180 331 23 158 270 - - 26 60 - 275 338 20 16 238 318 333 347 39 63 144 252 333 41 45 126 225 - 24 70 145 215 290 25 72 144 216 288 27 72 144 216 288 22 21 16 135 175 349 36 72 144 216 288 55 30 142 226 314 32 72 145 215 288 34 62 142 218 298 Normal W X Y * 10-7 & 12-14 layouts, W non standard orientation C B Ø A Z 77 851 Protection non cadmiée Cadmium free plating SOURIAU propose des connecteurs 851 avec une protection noire non cadmiée. Cette protection zinc-nickel a été développée pour répondre aux nouvelles exigences en matière de respect de l’environnement (directive Européenne 76/769 EEC). Raison : • Réduire le niveau de pollution par métaux lourds produit par le cadmium • Réduire les risques de santé engendrés par les produits cadmiés. Caractéristiques : • Mécaniques - boîtiers : aluminium - protection : zinc-nickel • Electriques - continuité électrique des boîtiers : ≤ 2,5 mΩ • Climatiques - tenue au brouillard salin : 500 heures Références : Exemples* : • Version à souder 851 00 E 8-3A P.54 protection zinc-nickel • Version à sertir 851 00 R 8-3A P.54 protection zinc-nickel * Voir système de référence - page 11 (version à souder et à sertir) - page 13 (version à picots et connexions enroulées) Cette protection est disponible pour les boîtiers de type : - 00: embase à collerette carrée avec possibilité de raccord - 02: embase à collerette carrée sans possibilité de raccord - 07: embase à fixation par écrou avec possibilité de raccord - 07A: embase à fixation par écrou sans possibilité de raccord - 01: prolongateur - 06: fiche droite sans bague de blindage - 36: fiche droite avec bague de blindage Raccords, nous consulter. SOURIAU propose a 851 connector with cadmium free plating black. This zinc-nickel plating has been introduced in accordance with European Herth and Safety requirements (European directive 76/769 EEC). Reason : • Reduction in level of heavy metal pollutants produced by cadmium. • Reduction in health associated with the corrosive by products of cadmium. Characteristics : • Mechanical - shell : aluminium alloy - plating : zinc-nickel • Electrical - shell continuity : ≤ 2.5 mΩ • Climatic - salt spray : 500 hours Part numbers : Examples* : • Solder version 851 00 E 8-3A P.54 zinc-nickel plating • Crimp version 851 00 R 8-3A P.54 zinc-nickel plating * See part numbers system - page 11 (solder and crimp version) - page 13 (straight PC tails and wire-wrap versions) This plating is available for shell type : - 00: square flange receptacle accepting backshells - 02: square flange receptacle not accepting backshells - 07: jam nut receptacle accepting backshells - 07A: jam nut receptacle not accepting backshells - 01: cable connecting receptacle - 06: plug for use without straight backshell - 36: screened plug for use with straight backshells Backshells, please consult us. 78 Notes / Notes IND851CA03ENFRW © SOURIAU - April 2009 - All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. www.souriau.com www.souriau-industrial.com contactindustry@souriau.com 21 UT0 Metal circular connector Description “UT0” industrial circular connectors are a range of multiway connectors available in 8 shell sizes and 8 insert arrangements all intermateable, interchangeable and intermountable with the TRIM TRIO “UTG” and “UTP industrial connector families. “UT0” is equipped with identical shells from military connectors complying to MIL-C-26482 spec. Strong and rugged built to resist every environmental and mechanical requirement for indoor and outdoor applications. Amongst several characteristics, “UT0” offers possibilities on: Shielding, High levels on sealing and salt spray. UT0 is also the perfect solution to connect cat5e Ethernet applications in combination with other signals, using the same TRIM TRIO contacts (consult factory for more info). Features and benefits (see p2) • Suitable for shielding applications • Available in 8 shell sizes and 8 insert arrangements. • Available in plug and receptacle versions for both male and female contacts. • Different insert orientations possible. • Plastic inserts with flammability rating: UL94-V0. • 2 levels of water protection: Dynamic IP67 and IP68 both versions are IP69K • 2 levels of salt spray: 48h and 96h Higher salt spray resistance (200/500h) upon request • Cat5e Ethernet compatible. Can be combined with other signals offering the advantage to use same contacts (consult factory). • UL recognition in process. • Metal bayonet ring: - Metal wave spring loaded - Locks with audible positive “click” - Assures 500 matings and unmatings • RoHS compliant Performance characteristics Operating temp: -40°C to +105°C Insulation resistance: 5000 MΩ min. Test potential: 2000 VAC Durability: 500 matings and unmatings. Vibration Per MIL-STD202 resistance: method 204 Thermal shock: Per MIL-STD202 method 207 Corrosion: Salt spray per MIL-STD 202 method 101 48h (standard version) 96h (black anodised coupling ring) Higher salt spray resistance (200/500h) upon request Shielding effectiveness: 95 dB at 1 Mhz Degree of water protection per DIN 40050: Dynamic IP67 / IP68 / IP69K in mated condition and in combination with sealed back shell. How to order H or H6 – – – – H –– PS 12 12 14 14 06 UT0 UT0 Body variation: 0 : Wall mounting receptacle 6 : Cable plug 7 : Jam nut receptacle for rear panel mounting Shell size: Insert arrangement: Type of contacts: P : Pin contacts S : Socket contacts Insert polarisation: No letter : Standard version W, X, Y, Z: Different orientations (consult factory) Application: H : Standard version, water protected IP 67 & IP 69K H6 : Water protected IP 68 & IP 69K (only needed for wall mounting & jam nut receptacles) Design variation: No letter : Standard version Others : Special versions Plating: No letter : Standard is nickel plating (48h salt spray) 01: Black anodised jam nut (96h salt spray) 02: Black anodised coupling ring (96h salt spray) new Construction Shells: Zinc alloy Backshells and cable glands: Brass Coupling ring: Aluminium alloy Coupling spring: Spring stainless steel Insert: Glass-filled thermoplast UL94-V0 RoHS compliant Contact accommodation • “UT0” connectors accept TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contacts section) • Contacts to be ordered seperately. Dynamic IP68 / IP69K High salt spray resistance RoHS compliant 2 New UT0 - UT0W series New UT0 – UT0W series: • The exclusive new product range in the TRIM TRIO broadline. • Aesthetic and top class performances UT0 – UT0W series major technical features & benefits For detailed information on UT0 and UT0W series offering see pages 21 to 31 • Full metal bayonet connector – Enabling 500 mating-unmating without wear out – Secure locking device: audible “click” when mating • In accordance with following standards – UT0 is Ethernet Cat5e compatible (consult factory) – UTO-UTOW ranges are upgradeable to highspeed solutions • RoHS compliant – Cadmium and lead free materials are used • High salt spray resistance* – Can be used in severe environment * Exists in 48 and 96 hours salt spray version * Higher salt spray resistance (e.g. 200 or 500 hours) upon request • Dynamic IP68* Connector will remain IP68 even when: – Pulling on the cable – Bending the cable * With appropriate back shell * Exists also in IP67 version • Dynamic IP69K* Connector withstands high pressure water cleaning. * With appropriate back shell New UT0-UT0W series 22 UT0 Cable plug for pin contacts (UT06- - - -PH) Part number Shell Ø A ±0.2 B max. Ø C ±0.15 Ø D ±0.15 E ±0.25 size UT06104PH 10 21.80 10.2 20.00 UT06128PH 12 26.10 13.4 23.60 UT061412PH 14 29.30 16.7 26.80 23.25 UT061619PH 16 32.45 33.00 19.7 30.00 UT061823PH 18 35.25 21.7 33.30 UT062028PH 20 38.80 24.9 36.55 UT062235PH 22 42.00 28.1 39.50 25.20 UT062448PH 24 45.05 31.2 42.60 Cable plug for socket contacts (UT06- - - -SH) Part number Shell Ø A ±0.2 B max. Ø C ±0.15 Ø D ±0.15 E ±0.25 size UT06104SH 10 21.80 10.2 20.00 UT06128SH 12 26.10 13.4 23.60 UT061412SH 14 29.30 33.00 16.7 26.80 23.25 UT061619SH 16 32.45 19.7 30.00 UT061823SH 18 35.25 21.7 33.30 UT062028SH 20 38.80 24.9 36.55 UT062235SH 22 42.00 27.30 28.1 39.50 25.20 UT062448SH 24 45.05 31.2 42.60 Part numbers are suitable for both IP67 and IP68 water protection For 96h salt spray version add ”02” behind “H” e.g. UT061412PH02 (only bayonet ring will be black anodised) Part numbers are suitable for both IP67 and IP68 water protection For 96h salt spray version add ”02” behind “H” e.g. UT061412SH02 (only bayonet ring will be black anodised) new E ± 0,25 E ± 0,25 Dynamic IP68 / IP69K High salt spray resistance RoHS compliant 23 UT0 Wall mounting receptacle for pin contacts (UT00----PH/PH6) Wall mounting receptacle for socket contacts (UT00----SH/SH6) Part number IP67 IP68 Shell size A max. B ± 0.3 C ± 0.2 Ø D ± 0.15 E ± 0.25 F ± 0.25 Ø G ± 0.1 Ø H ± 0.1 Ø J ± 0.1 UT00104PH UT00104PH6 10 33.23 1.6 11.35 15.0 18.3 23.8 3.2 17.3 14.2 UT00128PH UT00128PH6 12 19.0 20.6 26.2 21.8 18.4 UT001412PH UT001412PH6 14 22.2 23.0 28.6 25.0 21.5 UT001619PH UT001619PH6 16 25.3 24.6 31.0 28.1 24.6 UT001823PH UT001823PH6 18 28.5 26.9 33.3 31.3 27.8 UT002028PH UT002028PH6 20 34.75 2.4 14.55 31.7 29.4 36.5 34.5 30.9 UT002235PH UT002235PH6 22 34.9 31.8 39.7 37.7 34.1 UT002448PH UT002448PH6 24 15.35 38.0 34.9 42.9 3.9 40.9 37.3 Part numbers are suitable for both 48h and 96h salt spray. A square sealing has to be ordered separately to guarantee a sealing with equipment. Refer to “Circular accessories” section (UTFD--). Part numbers are suitable for both 48h and 96h salt spray. A square sealing has to be ordered separately to guarantee a sealing with equipment. Refer to “Circular accessories” section (UTFD--). Part number IP67 IP68 Shell size A max. B ± 0.3 C ± 0.2 Ø D ± 0.15 E ± 0.25 F ± 0.25 Ø G ± 0.1 Ø H ± 0.1 Ø J ± 0.1 UT00104SH UT00104SH6 10 25.20 1.6 11.35 15.0 18.3 23.8 3.2 17.3 14.2 UT00128SH UT00128SH6 12 19.0 20.6 26.2 21.8 18.4 UT001412SH UT001412SH6 14 22.2 23.0 28.6 25.0 21.5 UT001619SH UT001619SH6 16 25.3 24.6 31.0 28.1 24.6 UT001823SH UT001823SH6 18 28.5 26.9 33.3 31.3 27.8 UT002028SH UT002028SH6 20 29.00 2.4 14.55 31.7 29.4 36.5 34.5 30.9 UT002235SH UT002235SH6 22 34.9 31.8 39.7 37.7 34.1 UT002448SH UT002448SH6 24 15.35 38.0 34.9 42.9 3.9 40.9 37.3 new B ± 0,3 B ± 0,3 Ø G ± 0,1 Dynamic IP68 / IP69K High salt spray resistance RoHS compliant 24 UT0 Jam nut receptacle for pin contacts (UT07----PH/PH6) - suitable for rear panel mounting Jam nut receptacle for socket contacts (UT07---SH/SH6) - suitable for rear panel mounting Part number IP67 IP68 Shell size Ø A ± 0.15 B ± 0.2 D Max. F Max. G ± 0.25 H ± 0.3 K ± 0.25 L ± 0.2 Ø M ± 0.2 UT07104PH UT07104PH6 10 14.9 19.30 33.90 3.2 27.0 22.2 16.6 17.0 17.7 UT07128PH UT07128PH6 12 19.0 31.8 27.0 20.8 21.2 22.5 UT071412PH UT071412PH6 14 22.2 34.9 30.2 23.9 24.3 25.7 UT071619PH UT071619PH6 16 25.3 38.1 33.3 27.1 27.5 28.7 UT071823PH UT071823PH6 18 28.5 41.3 36.5 30.3 30.6 32.0 UT072028PH UT072028PH6 20 31.7 24.70 39.00 6.4 46.1 39.7 33.4 33.8 35.2 UT072235PH UT072235PH6 22 34.9 49.2 42.9 36.6 37.0 38.4 UT072448PH UT072448PH6 24 38.0 25.50 40.50 53.4 46.0 39.8 40.1 41.5 For 96h salt spray version add ”01” at the end of the part number e.g. UT071412PH601 (only jam nut will be black anodised) For 96h salt spray version add ”01” at the end of the part number e.g. UT071412PH601 (only jam nut will be black anodised) Part number IP67 IP68 Shell size Ø A ± 0.15 B ± 0.2 D Max. F Max. G ± 0.25 H ± 0.3 K ± 0.25 L ± 0.2 Ø M ± 0.2 UT07104SH UT07104SH6 10 14.9 19.30 33.00 3.2 27.0 22.2 16.6 17.0 17.7 UT07128SH UT07128SH6 12 19.0 31.8 27.0 20.8 21.2 22.5 UT071412SH UT071412SH6 14 22.2 34.9 30.2 23.9 24.3 25.7 UT071619SH UT071619SH6 16 25.3 38.1 33.3 27.1 27.5 28.7 UT071823SH UT071823SH6 18 28.5 41.3 36.5 30.3 30.6 32.0 UT072028SH UT072028SH6 20 31.7 24.70 39.00 6.4 46.1 39.7 33.4 33.8 35.2 UT072235SH UT072235SH6 22 34.9 49.2 42.9 36.6 37.0 38.4 UT072448SH UT072448SH6 24 38.0 25.50 40.50 53.4 46.0 39.8 40.1 41.5 new Dynamic IP68 / IP69K High salt spray resistance RoHS compliant connectors on request on request on request 41 Circular accessories Plastic cable clamp with strain relief (UTG--AC) Part number Shell Cable range Ø A ± 0.4 L ± 0.5 size Ø UTG10AC 10 3.0 - 8.70 21.0 40.0 UTG12AC 12 3.0 - 12.8 24.0 40.0 UTG14AC 14 4.0 - 13.8 27.0 46.0 UTG16AC 16 5.0 - 17.0 30.2 46.0 UTG18AC 18 5.0 - 19.0 33.3 50.0 UTG20AC 20 5.0 - 21.0 36.5 55.0 UTG22AC 22 5.0 - 23.0 39.7 60.0 UTG24AC 24 8.0 - 27.0 42.9 65.0 Plastic cable clamp with strain relief nut for waterprotected (IP65) applications (UTG--PG) Part number Shell Sealing* L ± 1 A ± 0.5 size outer dia x inner dia’s UTG10PG 10 13.5 x 5 x 8 54 21.0 UTG12PG 12 16 x 7 x 10.5 x 13 x 16 57 24.0 UTG14PG 14 18.5 x 7 x 105 x 13 x 16 62 27.0 UTG16PG 16 20.5 x 8 x 10.5 x 13 x 16 68 30.2 UTG18PG 18 20.5 x 8 x 10.5 x 13 x 16 71 33.3 UTG20PG 20 26 x 11 x 15 x 18 x 22 82 36.5 UTG22PG 22 26 x 11 x 15 x 18 x 22 88 39.7 UTG24PG 24 35 x 19 x 23 x 27 x 31 103 42.9 *In order to accommodate different cable dia’s, the sealing exisits of different layers which can be pulled out easily. Cable clamp has a PG style cable gland. For threading specifications see last page of this section “Circular accessories” For threading specifications see last page of this section “Circular accessories” Suitable for UTP-UTG Suitable for UTP-UTG 42 Circular accessories Plastic cable clamp with strain relief nut for waterprotected (IP65) applications (UTG--ST) Part number Shell Cable range Dia. A ± 0.5 L ± 1 size UTG10ST 10 2 - 6 21.0 64 UTG12ST 12 3 - 7 24.0 64 UTG14ST 14 6 - 9 27.0 69 UTG16ST 16 7 - 12 30.2 72 UTG18ST 18 33.3 76 UTG20ST 20 9 - 16 36.5 80 UTG22ST 22 39.7 86 UTG24ST 24 13 - 20 42.9 91 Metal cable clamp with strain relief (UT0--AC) Cable clamp has a PG style cable gland. For threading specifications see last page of this section “Circular Part number Shell size Max cable dia. Excl. sealing Ø A±0.2 B maxi C maxi UT010AC 10 5.0 16.3 21.6 31.0 UT012AC 12 8.2 19.4 25.0 31.5 UT014AC 14 10.0 22.5 27.4 34.0 UT016AC 16 13.0 25.8 29.4 34.0 UT018AC 18 16.0 29.2 35.2 31.4 UT020AC 20 16.0 32.5 35.2 32.0 UT022AC 22 19.3 35.7 41.1 31.0 UT024AC 24 20.6 38.8 42.4 31.0 For threading specifications see last page of this section “Circular accessories” Suitable for UTP-UTG Suitable for UT0-UT0W 43 Circular accessories Short cable clamp with strain relief nut for waterprotected applications (IP68). (UT0--JCS) Long cable clamp with strain relief nut for waterprotected applications (IP68). (UT0--JC) Part number Shell size Clamping range (Ø en mm) min / max L± 1 Short Thread A version Long version Short version Long version UT010JCS UT010JC 10 03 / 06 48.5 60.5 9/16 – 24 UNEF Class 2A UT012JCS UT012JC 12 06 / 10 49.5 61.5 11/16 – 24 UNEF Class 2A UT014JCS UT014JC 14 06 / 10 53.5 67.5 13/16 – 20 UNEF Class 2A UT016JCS UT016JC 16 9.5 / 14 62.5 73.5 15/16 – 20 UNEF Class 2A UT018JCS UT018JC 18 9.5 / 14 65.5 76.0 1’’ 1/16 – 18 UNEF Class 2A UT020JCS UT020JC 20 11.5 / 18 70.5 84.0 1’’ 3/16 – 18 UNEF Class 2A UT022JCS UT022JC 22 11.5 / 18 76.5 88.0 1’’ 5/16 – 18 UNEF Class 2A UT024JCS UT024JC 24 11.5 / 18 82.0 92.0 1’’ 7/16 – 18 UNEF Class 2A Short cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0--JCSL) Long cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0--JCL) Part number Shell size Clamping range (Ø en mm) min / max L± 1 Short Thread A version Long version Short version Long version UT010JCSL UT010JCL 10 05 / 08 49.5 61.5 9/16 – 24 UNEF Class 2A UT012JCSL UT012JCL 12 08 / 12 49.5 62.5 11/16 – 24 UNEF Class 2A UT014JCSL UT014JCL 14 08 / 12 54.5 68.5 13/16 – 20 UNEF Class 2A UT016JCSL UT016JCL 16 11.5 / 18 68.5 79.5 15/16 – 20 UNEF Class 2A UT018JCSL UT018JCL 18 11.5 / 18 71.5 82.0 1’’ 1/16 – 18 UNEF Class 2A UT020JCSL UT020JCL 20 15 / 24 77.5 91.0 1’’ 3/16 – 18 UNEF Class 2A UT022JCSL UT022JCL 22 15 / 24 83.5 95.0 1’’ 5/16 – 18 UNEF Class 2A UT024JCSL UT024JCL 24 15 / 24 89.0 99.0 1’’ 7/16 – 18 UNEF Class 2A Cable clamp has a Metric style cable gland. For threading specifications see last page of this section “Circular accessories” Cable clamp has a Metric style cable gland. For threading specifications see last page of this section “Circular accessories” Suitable for UT0-UT0W Suitable for UT0-UT0W 44 Circular accessories Short shielded cable clamp with strain relief nut for waterprotected applications (IP68). (UT0S----JCS) Long shielded cable clamp with strain relief nut for waterprotected applications (IP68). (UT0S----JC) Part number Shell size Clamping range (Ø en mm) min / max L± 1 Short Thread A version Long version Short version Long version UT0S10JCS UT0S10JC 10 04 / 6.5 58.5 70.5 9/16 – 24 UNEF Class 2A UT0S12JCS UT0S12JC 12 07 / 10.5 61.5 74.5 11/16 – 24 UNEF Class 2A UT0S14JCS UT0S14JC 14 07 / 10.5 66.5 80.5 13/16 – 20 UNEF Class 2A UT0S16JCS UT0S16JC 16 10 / 14.5 72.5 83.5 15/16 – 20 UNEF Class 2A UT0S18JCS UT0S18JC 18 10 / 14.5 75.5 86.0 1’’ 1/16 – 18 UNEF Class 2A UT0S20JCS UT0S20JC 20 13.5 / 18 84.5 97.5 1’’ 3/16 – 18 UNEF Class 2A UT0S22JCS UT0S22JC 22 13.5 / 18 90.0 101.5 1’’ 5/16 – 18 UNEF Class 2A UT0S24JCS UT0S24JC 24 13.5 / 18 95.5 105.5 1’’ 7/16 – 18 UNEF Class 2A Short shielded cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0S----JCSL) Long shielded cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0S----JCL) Part number Shell size Clamping range (Ø en mm) min / max L± 1 Short Thread A version Long version Short version Long version UT0S10JCSL UT0S10JCL 10 05 / 8.5 59.5 71.5 9/16 – 24 UNEF Class 2A UT0S12JCSL UT0S12JCL 12 08 / 12.5 61.5 74.5 11/16 – 24 UNEF Class 2A UT0S14JCSL UT0S14JCL 14 08 / 12.5 66.5 80.5 13/16 – 20 UNEF Class 2A UT0S16JCSL UT0S16JCL 16 13.5 / 18 82.5 93.5 15/16 – 20 UNEF Class 2A UT0S18JCSL UT0S18JCL 18 13.5 / 18 85.5 96.0 1’’ 1/16 – 18 UNEF Class 2A UT0S20JCSL UT0S20JCL 20 17 / 24 93.0 106.5 1’’ 3/16 – 18 UNEF Class 2A UT0S22JCSL UT0S22JCL 22 17 / 24 99.0 110.5 1’’ 5/16 – 18 UNEF Class 2A UT0S24JCSL UT0S24JCL 24 17 / 24 104.5 114.5 1’’ 7/16 – 18 UNEF Class 2A Cable clamp has a Metric style cable gland. For threading specifications see last page of this section “Circular accessories” Cable clamp has a Metric style cable gland. For threading specifications see last page of this section “Circular accessories” Suitable for UT0-UT0W Suitable for UT0-UT0W 45 Circular accessories Metal right angle cable clamp with strain relief nut (UTG--LPGN / UTO--LPGN) Part number Part number Shell A max B max Cable range For UTP / UTG For UT0 / UT0W size UTG10LPGN UT010LPGN 10 48.0 30.0 13.5 x 5 x 8 UTG12LPGN UT012LPGN 12 50.0 33.5 16 x 7 x 10.5 x 13 UTG14LPGN UT014LPGN 14 52.0 36.5 18.5 x 7 x 10.5 x 13 x 16 UTG16LPGN UT016LPGN 16 55.0 39.5 20.5 x 8 x 10.5 x 13 x 16 UTG18LPGN UT018LPGN 18 60.0 46.0 20.5 x 8 x 10.5 x 13 x 16 UTG20LPGN UT020LPGN 20 58.0 47.0 26 x 11 x 15 x 18 x 22 UTG22LPGN UT022LPGN 22 58.0 48.5 26 x 11 x 15 x 18 x 22 UTG24LPGN UT024LPGN 24 67.0 54.5 35 x 19 x 23 x 27 x 31 Cable clamp has a PG style cable gland. For threading specifications see last page of this section “Circular accessories” Metal shrink boot adaptor (UTG--AD) for UTP and UTG Part number Shell size Ø A±0.2 B UTG10AD 10 21.0 UTG12AD 12 24.0 19.2 UTG14AD 14 27.0 UTG16AD 16 30.0 21.5 UTG18AD 18 33.3 UTG20AD 20 36.5 22.8 UTG22AD 22 39.7 UTG24AD 24 42.9 21.9 Standard plating is anodised black. For tin plating add “T” at the end of the part number e.g. UTG12ADT For threading specifications see last page of this section “Circular accessories” 46 Circular accessories Environmental dustcap for plugs (UTG6--DCG) Part number Shell size A max. B UTG610DCG 10 20.0 UTG612DCG 12 24.0 UTG614DCG 14 27.5 20.8 UTG616DCG 16 30.5 UTG618DCG 18 33.5 UTG620DCG 20 36.5 UTG622DCG 22 40.0 22.5 UTG624DCG 24 43.0 For dustcap without chain skip “G” e.g. UTG612DC Metal shrink boot adaptor for UTO and UTOW Part number Shell size Ø A±0.2 B For threading specifications see last page of this section “Circular accessories” UT010AD 10 21 UT012AD 12 24 24.7 UT014AD 14 27 UT016AD 16 30 UT018AD 18 33.3 UT020AD 20 36.5 27 UT022AD 22 39.7 UT024AD 24 42.9 Suitable for UTP-UTG-UT0-UT0W 47 Circular accessories Plastic environmental dustcap for receptacles (UTP--DCG) Part number Shell size Ø A ±0.2 B max. UTP10DCG 10 26.7 19.3 UTP12DCG 12 31.4 20.0 UTP14DCG 14 34.5 UTP16DCG 16 37.8 20.2 UTP18DCG 18 40.8 UTP20DCG 20 43.9 UTP22DCG 22 47.0 21.8 UTP24DCG 24 50.1 For dustcap without chain skip “G” e.g. UTP12DC For jam dustcap consult factory Metal environmental dustcap for receptacles (UT0--DCG) Part number Shell size A max. UT010DCG 10 20.8 UT012DCG 12 24.9 UT014DCG 14 28.1 UT016DCG 16 31.3 UT018DCG 18 34.4 UT020DCG 20 37.6 UT022DCG 22 40.8 UT024DCG 24 43.9 For dustcap without chain skip “G” e.g. UTG12DC For jam dustcap consult factory Suitable for UTP-UTG-UT0-UT0W Suitable for UTP-UTG-UT0-UT0W 48 Sealing for wall mounting receptacle (UTFD1-B) Part number Shell size Ø F ±0.1 R ±0.25 S ±0.25 Ø V UTFD12B 10 15.9 18.3 23.8 UTFD13B 12 19.0 20.6 26.2 UTFD14B 14 22.2 23.0 28.6 UTFD15B 16 25.4 24.6 31.0 3.3 UTFD16B 18 28.6 27.0 33.3 UTFD17B 20 31.8 29.4 36.5 UTFD18B 22 34.9 31.8 39.7 UTFD19B 24 38.1 34.9 42.9 4.0 Cable gland threadings used on cable clamps Shell size Thread size on connectors PG threading Metric threading 10 9/16 - 24 UNEF PG9 M16 x 1.5 12 11/16 - 24 UNEF PG11 M20 x 1.5 14 13/16 - 20 UNEF PG13.5 M20 x 1.5 16 15/16 - 20 UNEF PG16 M25 x 1.5 18 1-1/16 - 18 UNEF PG16 M25 x 1.5 20 1-3/16 - 18 UNEF PG21 M32 x 1.5 22 1-5/16 - 18 UNEF PG21 M32 x 1.5 24 1-7/16 - 18 UNEF PG29 M32 x 1.5 Circular accessories Adaptors for flexible cable protection systems (conduits) Adaptors for flexible cable protections systems that fit to the TRIM TRIO circular connectors are available from cable protection systems manufacturers (e.g. PMA). 2 solutions are offered: • UNEF Adaptors that fit directly onto the connectors (left picture) • METRIC Adaptors that fit onto the metal cable clamp tubes as indicated on pages 43 and 44 (right picture) These types of adaptors offer extra protection to single wire applications (electrical, coax, Fibre optic … etc.) Note: the adaptors are not available from Souriau. They must be ordered directly from the manufacturers Suitable for UTP-UTG-UT0-UT0W 0,8 ± 0,2 Clipper Industrial Plastic Connectors 2 Clipper Industrial Plastic Connectors Connectors and interconnect systems for harsh environments The company designs, manufactures and markets high performance interconnect solutions for severe environments from industrial broadline and universal ranges to complex system with integrated functions: filtering, high speed data transmission, hermetic seal, separation mechanism, remote handling, underwater mating, … The dedicated end markets for SOURIAU’s products are aeronautical, defense-space and industrial. Industrial Railway Geophysics Manufacturing environment Instrumentation Automation & process Civil & military aircraft Helicopter Weapon delivery system Avionics Military marine Communications Satellites Launcher & missile Aeronautical Equipment & system SOURIAU was established in 1917 and has been created by successive acquisitions of the industrial, aeronautical, defense and space activities of SOURIAU, JUPITER and BURNDY. The Group’s products are engineered and manufactured in the USA and Dominican Republic, Europe and Morocco, Japan and India, and sold by a worldwide sales and marketing organization, and in addition to SOURIAU’s offices, a large network of licensed distributors and agents. SOURIAU complies with most of national and international Quality Assurance Standards, production unit with ISO 14001. 3 Clipper Industrial Plastic Connectors Description/Features/Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Square flange receptacle and in-line receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Plug and backnut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Electrical thread backshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Stamped and formed contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Machined contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 IP68 configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 IP67 configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Mated and unmated connectors (with backshells) overall dimensions . . . . . . . . . . . . . . . . . . . . . . . 16 Dimensions (receptacle and plug) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Manual crimping tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Automatic crimping tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Panel mounting/panel cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Wiring instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Assembly instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 General technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Contents Clipper Industrial Plastic Connectors 4 Presentation CLIPPER is a plastic low cost range of industrial connectors, UL & CSA approved. Complementing SOURIAU product range CLIPPER offers : • a high sealing level : - IP67 for the sealed plug (with o’ring and mating seal) - IP68 for the enhanced sealed plug (with o’ring and a special mating seal). This version allows a permanent waterproof level when immersed at depths down to 30 meters. • a retention plate system allowing insertion/extraction of the contacts without the need for tooling, • facilities to use trade backshells with the electrical thread adaptor (PG). CLIPPER range is composed of : • 4 sizes of shell in molded black thermoplastic material (size 1/2/3/4). • 7 contact layouts (4/9/14/18/26/31/40 contacts). • #20, #16 contacts, machined or stamped and formed, crimp, solder or PC tail termination. • An adaptor with electrical PG thread for PG backshells. • Backnut with grommet facilities. Locked, the retention plate holds the contacts firmly in position Unlocked, the retention plate allows the insertion/extraction of contacts without tooling Locked plate Unlocked plate Description Retention plate principle Features Mechanical • Monobloc shell and insulator in thermoplastic material self-extinguishing to UL 94 V0. • 180° screw coupling with positive audible safety latch. • Scoop proof. • Copper alloy contacts, machined or stamped and formed • plating : gold on active part over nickel. • Mechanical endurance : - connector : 250 cycles mating / unmating, - retention plate : 50 cycles mating / unmating. • Retention force : - # 20 → 70 N - # 16 → 90 N. • Vibration : - frequency range : 10-2000 Hz, 20 g - 10 cycles in accordance with CEI 68-2-6 Electrical • Withstand voltage : 1500 Vrms min or in accordance with DIN 57110b. • Contact resistance < 10 mW. • Current rating per contact : - machined contacts : # 20 (7 Amps), # 16 (13 Amps) - stamped and formed contacts : # 20 (5 Amps), # 16 (10 Amps). Environmental • Sealing : - up to IP68 • Working temperature : -40°C to +125°C. (-40°F to +257°F) • Resistance to salt spray : - 48 h min - > 1000 h (sealed mated connectors). • Resistance to fluids : - oil, - petrol, fuel, - lubricants - other fluids : consult us. Clipper Industrial Plastic Connectors 5 CL1M1100 CL1R1100 CL1R1101 CL1R1102 CL1R2102 CL1R3102 CL1R4202 CL1R2101 CL1R3101 CL1R4201 CL1M1101 CL1M1102 CL1C1100 CL1C1101 CL1C1201 CL1C2101 CL1C2201 CL1C3101 CL1C3201 CL1C4101 CL1C1200 CL1C2100 CL1C2200 CL1C3100 CL1C3200 CL1C4100 CL1C4200 CL1M1202 CL1M2102 CL1M2202 CL1M3102 CL1M3202 CL1M4102 CL1M4202 CL1M1201 CL1M2101 CL1M2201 CL1M3101 CL1M3201 CL1M4101 CL1M4201 CL1R2100 CL1R3100 CL1R4200 CL1M1200 CL1M2100 CL1M2200 CL1M3100 CL1M3200 CL1M4100 CL1M4200 Receptacle types without contacts Contacts layouts Unsealed receptacle (without o’ring) for male contacts for female contacts for male contacts for female contacts for male contacts for female contacts unsealed for male contacts sealed for male contacts Sealed receptacle (with o’ring) for use with backshell Sealed receptacle (with o’ring and panel gasket) In-line receptacle Shell sizes 1 2 3 4 4 cts # 16 9 cts # 20 9 cts # 16 14 cts # 20 18 cts # 16 31 cts # 20 26 cts # 16 40 cts # 16 Available Style Square flange receptacle and in-line receptacle Part number CL1C4201 Clipper Industrial Plastic Connectors 6 Part number Grommet Thrust ring O ring CL1P1100 CL1F1100 CL1F1200 CL1F1101 (IP67) CL1F1103 (IP68) CL1F1201 (IP67) CL1F1203 (IP68) CL111101 CL111201 CL112101 CL113101 CL113201 CL114101 CL114201 CL1F2101 (IP67) CL1F2103 (IP68) CL1F2201 (IP67) CL1F2203 (IP68) CL1F3101 (IP67) CL1F3103 (IP68) CL1F3201 (IP67) CL1F3203 (IP68) CL1F4101 (IP67) CL1F4103 (IP68) CL1F4201 (IP67) CL1F4203 (IP68) CL1P1101 CL111102 CL111000 CL112000 CL113000 CL111202 CL112102 CL113102 CL113202 CL114102 CL114202 CL1P2101 CL1P3101 CL1P4201 CL1F2100 CL1F2200 CL1F3100 CL1F3200 CL1F4100 CL1F4200 CL1P2100 CL1P3100 CL1P4200 Plug types without contacts Contact layouts Unsealed plug (without o’ring and mating seal) for male contacts for female contacts for male contacts for female contacts for male contacts for female contacts for male and female contacts Sealed plug (with o’ring and mating seal) Sealed backnut Unsealed backnut Shell sizes 1 2 3 4 4 cts # 16 9 cts # 20 9 cts # 16 14 cts # 20 18 cts # 16 31 cts # 20 26 cts # 16 40 cts # 16 Plug and backnut CL114000 Unsealed (IP40) Clipper Industrial Plastic Connectors 7 Note : Electrical thread backshells are always supplied complete with the adaptor. Part numbers Description 1 2 3 4 (PG 13,5) (PG 16) (PG 21) (PG 36) (PG 36) Straight backshell for flexible CL101040 CL102040 CL103040 CL124040 CL104040 conduit systems Straight cable CL101030 CL102030 CL103030 CL124030 - clamp Sealed Part numbers Description 1 2 3 4 (PG 13,5) (PG 16) (PG 21) (PG 36) (PG 36) Elbow backshell with sealing CL101051 CL102051 CL103051 CL124051 - gland Straight backshell for flexible CL101041 CL102041 CL103041 CL124041 CL104041 conduit systems Antidecoupling sealing CL101021 CL102021 CL103021 CL124021 CL104021 gland backshell Electrical thread backshells (PG) Clipper Industrial Plastic Connectors Shell Part number 1 CL141001 2 CL142001 3 CL143001 4 CL144001 Dim. (inches) / Shell sizes A B C D E 1 .84 .96 1.52 .13 1.15 2 .97 1.10 1.56 .13 1.21 3 1.12 1.20 1.69 .15 1.40 4 1.44 1.55 1.95 .15 1.87 90° sealed adaptors for receptacles Shell 1 to 4 * with panel gasket Shell Part numbers Sealed* 1 CL131001 2 CL132001 3 CL133001 4 CL134001 IP67 Dust cap for receptacle 90° adaptors for receptacles Accessories 8 90° adaptors for receptacles Panel gasket (for square flange receptacle) Shell sizes 1 2 3 4 Part numbers CL191001 CL192001 CL193001 CL194001 Clipper Industrial Plastic Connectors 9 Assembly male 2 mm to 3 mm (0.08" to 0.12") female 16 0.7 to 1.5 mm2 male female CF16PC10RF CF16SC10RF CF16PC18RF CF16SC18RF Bulk Reel 5,000 pcs. male 1.2 mm to 2.1 mm (0.05" to 0.08") female female 20 0.35 to 0.6 mm2 male CF10PC10RF CF10SC10RF CF10PC18RF CF10SC18RF Bulk Reel 5,000 pcs. Filler plug # 16 Part number : 8500 479 CL (for un-used contact cavities) Polarization Contact Part number : CP16SW9700 (instruction for polarizing connector - see page 23) Filler plug # 20 Part number : 8500 4144 (for un-used contact cavities) 18 to 16 22 to 20 CM16PT10LY CM10PT10LY 16 20 male male Bulk Print Circuit (PC) Tail Machined Contact Admissible section mm2 AWG Ø mm over insulation (inches) Part numbers Size Crimp Contact with strain relief Packaging Plating RF : gold flash on active part for standard version (For other platings, consult FCI) Stamped and formed contacts Clipper Industrial Plastic Connectors 10 CM16PC10MQ CM16PC20MQ* CM16SC10MQ CM16SC20MQ* CM16PS10MQ CM16SS10MQ Part numbers CM16PC10MQ CM16SC10MQ CM16PS10MQ CM16SS10MQ CM10PS10MQ male female male female Plating MQ : 0.4μ mm gold on active part (.016μ inches) * Up to 1.91 mm2 Packaging male female male CM16PC20MQ female CM16SC20MQ male CM10PC20MQ female CM10SC20MQ Bulk solder 8501 9641 8501 9642 CL 16 20 male male Bulk Extended ground contact-crimp (Length + .039 inch = +1 mm) 0.08" to 0.12" 18 to 14 0.05" to 0.08" 24 to 18 2 mm to 3 mm 16 (0.08" to 0.12") 0.93 to 1.91 mm2 16 2 to 3 mm (0.08" to 0.12") 20 0.21 to 0.60 mm2 1.2 to 2.1 mm (0.05" to 0.08") 30 to 24 0.06 to 0.21 mm2 20 Contact types Size Ø mm over insulation (inches) Admissible section mm2 male female CM10PC10MQ CM10SC10MQ 20 1.2 mm to 2.1 mm (0.05" to 0.08") 18 to 14 AWG 0.21 to 0.93 mm2 crimp male female CM16PC00MQ CM16SC00MQ 16 2 mm to 3 mm (0.08" to 0.12") 0.93 to 2.60 mm2 crimp solder crimp CM10SS10MQ 14* Max 24 to 18 18 Max 18 to 13 Machined contacts Clipper Industrial Plastic Connectors 11 IP68 Configuration (temporary water tightness down to 100 feet) IP68 Configuration Clipper Industrial Plastic Connectors Part numbers CL1C2201 CL1C4201 CL1C4101 CL1C3201 CL1C3101 CL1C2101 CL1C1201 CL1C1101 CL101021 (pg 13.5) CL1F1103 CL1F1203 CL1F2103 CL1F2203 CL1F3103 CL1F3203 CL1F4103 CL1F4203 CL1M1102 CL1M1202 CL1M2102 CL1M2202 CL1M3102 CL1M3202 CL1M4102 CL1M4202 for male contacts Sealed receptacle (with o’ring and panel gasket) for female contacts Sealed plug (with o’ring and mating seal) Anti-decoupling sealing gland backshell CL102021 (pg 16) CL103021 (pg 21) CL124021 (pg 29) Shell types (without contacts) and Backshell type Contacts layouts Shell sizes 1 2 3 4 4 cts # 16 9 cts # 20 9 cts # 16 14 cts # 20 18 cts # 16 31 cts # 20 26 cts # 16 40 cts # 16 for male contacts o’ring Sealed In-line receptacle IP68 Configuration CL104021 (pg 36) 12 IP67 Configuration (temporary water tightness) Clipper Industrial Plastic Connectors IP67 Configuration 13 Clipper Industrial Plastic Connectors Part numbers CL1F2201 CL1F4101 CL1F3201 CL1F3101 CL1F2101 CL1F1201 CL1F1101 CL1C1101 CL1C1201 CL1C2101 CL1C2201 CL1C3101 CL1C3201 CL1C4101 CL1M1102 CL1M1202 CL1M2102 CL1M2202 CL1M3102 CL1M3202 CL1M4102 Sealed receptacle (with o’ring and panel gasket) for male contacts Sealed plug (with o’ring and mating seal) o’ring Sealed In-line receptacle CL1M1102 CL1R1102 CL1P1101 CL1P2101 CL1P3101 CL1P4201 CL1R2102 CL1R3102 CL1R4202 CL1F4201 CL1M2102 CL1M3102 CL1M4202 Shell types without contacts Contact layouts for male contacts for female contacts Shell sizes 1 2 3 4 4 cts # 16 9 cts # 20 9 cts # 16 14 cts # 20 18 cts # 16 31 cts # 20 26 cts # 16 40 cts # 16 for male contacts for female contacts IP67 Configuration CL1C4201 14 Part numbers Clipper Industrial Plastic Connectors Grommet Thrust ring O ring CL111102 CL111101 CL111201 CL112101 CL113101 CL113201 CL114101 CL114201 CL101051 (pg 13.5) CL101041 (pg 13.5) CL101021 (pg 13.5) CL102021 (pg 16) CL103021 (pg 21) CL124021 (pg 29) CL124051 (pg 29) CL124041 (pg 29) CL111202 CL112102 CL113102 CL113202 CL114102 CL114202 CL102051 (pg 16) CL102041 (pg 16) CL103051 (pg 21) CL103041 (pg 21) CL104041 (pg 36) Backshell types Contact layouts for male contacts for female contacts Elbow backshell with sealing gland Straight backshell for flexible conduit systems Anti-decoupling sealing gland backshell Sealed backnut Shell sizes 1 2 3 4 4 cts # 16 9 cts # 20 9 cts # 16 14 cts # 20 18 cts # 16 31 cts # 20 26 cts # 16 40 cts # 16 IP67 Configuration CL104021 (pg 36) 15 Clipper Industrial Plastic Connectors LD LV A B ADAPTOR BACKNUT C STRAIGHT CABLE CLAMP D J STRAIGHT BACKSHELL FOR CONDUIT SYSTEM F SEALING GLAND BACKSHELL WITH ANTI-DECOUPLING SYSTEM G ELBOW BACKSHELL WITH SEALING GLAND KL R N Q * For other needs, consult FCI. Dimensions 1 2 3 4 (PG 29)(PG 36) LDA 2.01 2.09 2.09 2.17 2.17 LVA 2.29 2.33 2.33 2.41 2.41 LDB 1.81 1.85 1.85 - 1.85 LVB 2.09 2.09 2.09 - 2.09 LDC 2.68 2.85 3.03 3.41 - LVC 2.97 3.09 3.27 3.60 - LDD 3.41 3.50 3.62 3.70 4.25 LVD 3.70 3.74 3.86 3.94 4.47 LDF 3.15 3.27 3.35 3.74 4.02 LVF 3.43 3.50 3.58 3.98 4.25 LDG 3.31 3.46 3.77 4.29 - LVG 3.58 3.70 4.01 4.52 - R Max. 2.24 2.34 2.87 3.58 - Dim. (inches) Shell Cable acceptance* 1 2 3 4 (PG 29) (PG 36) J .24/.55 .24/.63 .31/.83 .39/ - 1.10 Conduit L .67 .67 .91 1.14 1.42 Pmaflex K Max .63 .63 .85 1.08 1.42 N .24/47 .39/.55 .51/.71 .71/.98 .87/ 1.26 Q .24/.47 .39/.55 .51/.71 .71/.98 - Dim. (inches) Shell Mated and unmated connectors with backshells Overall dimensions in inches 16 Clipper Industrial Plastic Connectors 17 Square flange receptacle Plug Dimensions in inches 1 2 3 4 A .8 .8 .8 .8 B 1.15 1.28 1.46 1.92 C .81 .94 1.12 1.57 D 1.52 1.56 1.56 1.56 Dim. (inches) Shell sizes 1 2 3 4 A 1.67 1.67 1.67 1.67 B .83 .96 1.14 1.59 C .71 .71 .71 .71 D .16 .16 .16 .16 E .81 .94 1.12 1.57 F 1.17 1.23 1.42 1.89 G min. .83 .96 1.11 1.43 Max. .92 .98 1.17 1.57 H .13 .13 .15 .15 Dim. (inches) Shell sizes Clipper Industrial Plastic Connectors • Squeeze the plier handles until a final click sounds, release, the pliers should open by themselves. • Fully insert the contact into the locator (corresponding gauge), the contact crimping lugs should be directed upwards, according to the drawing. • Put the stripped wire in the crimping part until it comes in contact with the stopper plate. Make sure that no strands stick out of the crimping part. • Squeeze the plier handles until a final click sounds, release, the pliers should open by themselves. • Check the overall aspect of the crimping. • Push the cable into the contact barrel and make sure the cable strands stick out of the inspection hole. • The pliers must be used on the jaws side. • Squeeze the plier handles until a final click sounds, release, the pliers should open by themselves. • Insert both wire and contact (or wire, reducing sleeve and contact) between the 4 jaws until stopped by the locator. • Fully squeeze until a final click sounds, the pliers should open once the crimping is performed • Extract the wire and crimped contact, then check the overall aspect of the crimping. Stamped and Formed Contacts (#16 and #20) Y16SCMCL3 Machined Crimping Contacts (#16 and #20) 8365 with locator 8365-02 Manual Crimping Tool 18 Crimping Mechanism (left side miniapplicators) Clipper Industrial Plastic Connectors UTM2 Automatic crimping tool for Clipper Description Electromechanical high speed semi automatic press is designed for mass production and is realized totally in assembled steel parts. Voltage: 115VAC - 60 Hz Power.: 700 Watts Weight: 300 lbs. (including one crimp mechanism) Dimensions: 939.8x533.4x711.2 mm (37.0"x21.0"x28.0") Contacts AWG Contact P/N Crimp Mech. P/N 16 16-18 CF16 PS 18RF CM30-R CF16 SC 18RF 20 20-22 CF10 PS 18RF CM31-R CF10 SC 18RF Press and crimping mechanism are rental. Please contact Customer Service. Automatic crimping tool 19 Clipper Industrial Plastic Connectors 20 Panel mounting There are two types of mounting possible: through the front or through the back of the panel. Panel cut-out • For a sealed mounting, the seal gasket shall be used, making sure the surface is in good condition. • Observe the drilling hole diameters indicated below. • Use the recommended screws : M3 (all shells) or # 4.40 (shells 1 and 2) # 6.32 (shells 3 and 4) • Respect the coupling torques indicated M3 (all shells) : 0.70 N.m Max Rear Mounting .157" max (4 mm max) Front Mounting .157" max (4 mm max) Panel mounting / Panel cut-out 1 2 3 4 H .85 .98 1.22 1.61 I .84 .97 1.13 1.44 J .13 .13 .15 .15 Dim. (inches) Shell sizes Wire Stripping Length • With machined crimping contacts • With stamped and formed crimping contacts Clipper Industrial Plastic Connectors 21 Jacketed Cable Stripping Length Make a 90° cut at the cable end. carefully make an incision in order to remove the cable protection on a length LD as described. Caution : This operation should be realized without deterioration of wires insulation. Then, follow the normal stripping instructions : - single wire with machined crimping contacts, - single wire with stamped and formed crimping contacts Stripping Instructions Use the upmost care with stripping operation : • Use stripping pliers appropriate for the cable gauge and which are in perfect condition. • In order to obtain a correct crimping and to maintain all of the connector sealing characteristics, the wires must have the dimensions described below. l Shell size 1 2 3 4 layouts Indifferent 26 40 LD mm 60 65 65 80 100 (inch) (2.36’) (2.56’) (2.56’) (3.15") (3.94") Contact size I = Wire stripping lenght layouts 6 mm (.236") #20 Ø over insulation > 2 mm l = 5 (> .08" l = .20") Ø over insulation > 2 mm l = 7 (> .08" l = .27") Contact diameter I = Wire stripping lenght #16 4 mm (.157") #20 4 mm (.157") Wiring Instruction Clipper Industrial Plastic Connectors 22 Instruction For Assembly Insertion and extraction of contacts Single wires Contact insertion and extraction is performed without a tool thanks to te retainer plate system. Insertion 1) With the thumb and index finger, squeeze the retainer plate flaps and pull backwards : the plate is then in the unlocked position. 2) Fully insert the wired contact in the cavity. 3) Repeat the same procedure for the other contacts. 4) Once again squeeze the retainer plate flaps and push forwards: the plate is then locked and retains the contacts (90 N of retention force for contacts of 1.6 mm dia.) 5) The plate can only be pushed backed if the contacts are correctly engaged (backup security) Extraction 1) With the thumb and index finger, squeeze the retainer plate flaps and pull backwards : the plate is then in the unlocked position. 2) Pull the contact wire: the the contact comes out of the cavity. 3) Repeat the same procedure for the other contacts. Special case of jacketed cables 1) Locate the first contact and the corresponding cavity. 2) The wire should described a buckle as describe below. 3) Unlock the retainer plate as described above. 4) Fully insert the wired contact in the cavity. 5) Respect the same procedure for the other contacts 6) Once again squeeze the retainer plate flaps and push forwards : the plate is then locked Special case of jacketed cables 7) Manually fully screw the adaptor and the backshell on the connector. Caution : In the sealed version don’t forget the O-ring. 8) Push forwards the cable of 10 mm in the backshell. 9) Fully screw on the backshell with a wrench while keeping the adaptor with another wrench. Note : The plate can only be pushed back if the contacts are correctly engaged (backup- security) Adaptor and PG electrical thread backshells The CLIPPER connector must be equipped with an adaptor in order to use a PG electrical thread backshell (e.g.: cable clamp or sealing gland, or flexible conduits system backshells, etc.) 1) Manually, fully screw the adaptor on the connector, the hexagonal nut towards the rear. 2) In the sealed version, cover the O-ring. 3) Manually, fully screw the PG thread backshell of your choice. Note: In the case of an elbow backshell, it is possible to adjust the position according to the angle desired. 1) Position the O-ring at the bottom of the backnut. 2) Run the backnut around the cable. 3) Unlock the retainer plate. 4) Position the grommet in the thrust ring, resting against the retainer plate. 5) Insert the contacts through the grommet and the retainer plate. 6) Lock the retainer plate. 7) Screw the backshell. Instruction For Assembly Clipper Industrial Plastic Connectors 23 When the insert is partially filled with contacts, place polarization contact into selected hole location in the FEMALE INSERT and push in until seated. • Polarization contacts are used to provide keying capabilities for the CLIPPER series. • Polarization contacts are used in the socket-cavities of standard plugs and reverse receptacles. In order to lock the couple of chosen connectors, you have to let free the cavity in front of the polarization contact. To avoid the connection with other connectors, you have to insert a contact in the cavity in front of the polarization contact. Heat shrink boot Shrink sleeve as follows : 1) Use heat gun with an air deflector nozzle. 2) Adjust air deflector opening to accommodate tubing size. Turn switch ON. Wait until full heat output is reached. 3) Position the air deflector over section of tubing to be shrunk. Start at pre-shrunk section and work towards open end. 4) When tubing begins to shrink, move gun so that air is distributed in a band around the tubing circumference causing it to shrink evenly around the cable. 5) Move nozzle to adjacent section and shrink in the same manner. Repeat process on section at a time until entire length is shrunk. Avoid excessive heat. Direct heat away from connector assembly to prevent damage. Instruction for polarizing connector mounting CP16SW9700 Grommet Backshell Assembly Clipper Industrial Plastic Connectors EXAMPLE : IP66-5 means: - Total protection against dust - Proof against temporary flooding - Proof against impact strength of 2 Joule Degree of protection in accordance with CEI 529, DIN 40050, NF EN 60529 General technical information 24 Clipper Industrial Plastic Connectors Conversion Table (mm) (inches) 8.2 0.32308 8.4 0.33096 8.6 0.33884 8.8 0.34672 9.0 0.35460 9.2 0.36248 9.4 0.37036 9.6 0.37824 9.8 0.38612 10.0 0.39400 10.5 0.41370 11.0 0.43340 11.5 0.45310 12.0 0.47280 12.5 0.49250 13.0 0.51220 13.5 0.53190 14.0 0.55160 14.5 0.57130 15.0 0.59100 15.5 0.61070 16.0 0.63040 16.5 0.65010 17.0 0.66980 17.5 0.68950 18.0 0.70920 18.5 0.72890 19.0 0.74860 19.5 0.76830 20.0 0.78800 20.5 0.80770 21.0 0.82740 21.5 0.84710 22.0 0.86680 22.5 0.88650 23.0 0.90620 23.5 0.92590 24.0 0.94560 24.5 0.96530 25.0 0.98500 25.5 1.00470 26.0 1.02440 26.5 1.04410 27.0 1.06380 27.5 1.08350 28.0 1.10320 28.5 1.12290 29.0 1.14260 29.5 1.16230 30.0 1.18200 30.5 1.20170 31.0 1.22140 31.5 1.24110 32.0 1.26080 32.5 1.28050 33.0 1.30020 33.5 1.31990 34.0 1.33960 34.5 1.35930 35.0 1.37900 35.5 1.39870 36.0 1.41840 36.5 1.43810 37.0 1.45780 37.5 1.47750 (°C) (°F) - 70 - 94 - 65 - 85 - 55 - 67 - 50 - 58 - 40 - 40 0 32 37 98.6 80 176 125 257 150 302 170 338 200 392 250 482 (1) 6145DJ - Câbles multipaires (armés, paires blindées) 250 MZH. (2) 6145DJ - Câbles multipaires (armés, paires non blindées) 250 MZH. (mm) (inches) 0.1 0.00394 0.2 0.00788 0.3 0.01182 0.4 0.01576 0.5 0.01970 0.6 0.02364 0.7 0.02758 0.8 0.03152 0.9 0.03546 1.0 0.03940 1.1 0.04334 1.2 0.04728 1.3 0.05122 1.4 0.05516 1.5 0.05910 1.6 0.06304 1.7 0.06698 1.8 0.07092 1.9 0.07486 2.0 0.07880 2.1 0.08274 2.2 0.08668 2.3 0.09062 2.4 0.09456 2.5 0.09850 2.6 0.10244 2.7 0.10638 2.8 0.11032 2.9 0.11426 3.0 0.11820 3.1 0.12214 3.2 0.12608 3.3 0.13002 3.4 0.13396 3.5 0.13790 3.6 0.14184 3.7 0.14578 3.8 0.14972 3.9 0.15366 4.0 0.15760 4.1 0.16154 4.2 0.16548 4.3 0.16942 4.4 0.17336 4.5 0.17730 4.6 0.18124 4.7 0.18518 4.8 0.18912 4.9 0.19306 5.0 0.19700 5.2 0.20488 5.4 0.21276 5.6 0.22064 5.8 0.22852 6.0 0.23640 6.2 0.24428 6.4 0.25216 6.6 0.26004 6.8 0.26792 7.0 0.27580 7.2 0.28368 7.4 0.29156 7.6 0.29944 7.8 0.30732 8.0 0.31520 (mm) (inches) 38.0 1.49720 38.5 1.51690 39.0 1.53660 39.5 1.55630 40.0 1.57600 40.5 1.59570 41.0 1.61540 41.5 1.63510 42.0 1.65480 42.5 1.67450 43.0 1.69420 43.5 1.71390 44.0 1.73360 44.5 1.75330 45.0 1.77300 45.5 1.79270 46.0 1.81240 46.5 1.83210 47.0 1.85180 47.5 1.87150 48.0 1.89120 48.5 1.91090 49.0 1.93060 49.5 1.95030 50.0 1.97000 51.0 2.00940 52.0 2.04880 53.0 2.08820 54.0 2.12760 55.0 2.16700 56.0 2.20640 57.0 2.24580 58.0 2.28520 59.0 2.32460 60.0 2.36400 61.0 2.40340 62.0 2.44280 63.0 2.48220 64.0 2.52160 65.0 2.56100 66.0 2.60040 67.0 2.63980 68.0 2.67920 69.0 2.71860 70.0 2.75800 71.0 2.79740 72.0 2.83680 73.0 2.87620 74.0 2.91560 75.0 2.95500 80.0 3.15200 85.0 3.34900 90.0 3.54600 100.0 3.94000 200.0 7.88000 400.0 15.76000 600.0 23.64000 800.0 31.52000 1000.0 39.40000 1200.0 47.28000 1600.0 63.04000 2000.0 78.80000 3200.0 126.08000 bar psi mmHg (torr) 10 145.0 7600 5 72.5 3800 2 29.0 1520 1 14.5 760 0.5 7.2 380 0.1 1.4 76 mbar psi torr (mmHg) 10 145.0 7600 5 72.5 3800 2 29.0 1520 1 14.5 760 0.5 7.2 380 0.1 1.4 76 25 Clipper Industrial Plastic Connectors 26 Notes Clipper Industrial Plastic Connectors 27 Notes www.souriau.com FSOURIAUCLIPPERJANVIER2007E © Copyright SOURIAU - Réalisation En Toute Transparence. UTS Series Dynamic IP68/69K • UV Resistant • UL/IEC Compliant © 2011 – SOURIAU 3 How to read our catalogue ........................................ 06 UTS range overview ..................................................... 07 General technical characteristics ............................. 10 Cable assembly ............................................................... 14 2 contacts ....................................................................... 20 2 + ground contacts ................................................... 28 3 contacts ........................................................................ 36 3 + ground contacts .................................................... 52 4 contacts ........................................................................ 60 5 contacts ........................................................................ 72 6 contacts ........................................................................ 76 6 + ground contacts .................................................... 88 7 contacts ........................................................................ 92 8 contacts ........................................................................ 96 10 contacts ..................................................................... 104 12 contacts ...................................................................... 108 14 contacts ...................................................................... 116 15 contacts ...................................................................... 120 18 contacts ..................................................................... 124 19 contacts ..................................................................... 128 23 contacts ..................................................................... 132 32 contacts ..................................................................... 136 Contents UTS Series Overview Mechanics Description ...................................................................... 142 Contact plating selector guide .................................. 143 Contact selector guide ................................................ 144 Packaging ........................................................................ 144 Crimp contacts ............................................................... 145 #16 coaxial contacts ................................................... 147 PCB contacts .................................................................. 148 Fibre optic contacts ...................................................... 149 Contacts Tooling .............................................................................. 154 Assembly instruction .................................................... 156 Dimensions overmoulded harnesses ..................... 162 Extraction tools .............................................................. 162 Rated current & working voltage .............................. 163 UV resistance ................................................................. 164 UL94 + UL1977 ............................................................ 165 IEC 61984 with IP code explanation ...................... 168 What is NEMA rating ? ................................................ 170 Ethernet for the layman ............................................... 171 Technical information #16 coaxial contacts - cabling notices .................. 176 Glossary of terms .......................................................... 183 Discrimination/Keying methods ............................... 184 Part number Index.......................................................... 185 Appendices Appendices Technical information Contacts Mechanics Overview UTS Series © 2011 – SOURIAU 5 Overview UTS Series How to read our catalog .............................................................................................................. 06 UTS range overview ...................................................................................................................... 07 General technical characteristics .............................................................................................. 10 6 © 2011 – SOURIAU UTS Series Overview SOURIAU is pleased to announce the arrival of a brand new catalog containing some signifi cant improvements to simplify the connector selection process and provide easy access to key information. In this version you can see all layouts at a glance, download 2D drawings and 3D models. Then, when your choice is made, you can click on the part number and buy online. Step 3 Step 2 Easy access to supporting material such as prints and CAD models. In just two pages you can gather together details of all accessories, contacts, tools etc required for your application. Interactive zones. Clearer understanding of the range. Step 1 © 2011 – SOURIAU 7 UTS range overview The UTS series is a plastic connector range but rugged enough to withstand industrial applications. The philosophy of the UTS series is built around three key elements: Dynamic IP68/69K UV Resistant UL/IEC Compliant In most applications, our connectors are exposed to extreme climatic conditions; it was therefore key for us to select the materials best able to cope with the targeted environment. Part of our product qualifi cation process involved subjecting connectors to a simulated fi ve years of exposure to various elements including Temperature, UV and Humidity. The results were positive in that there were no visible signs of weakness, such as cracking or crazing. The outmost priority for any electrical installation is to protect personnel from any shock hazard. In North America, Underwriters Laboratories insisted that connector manufacturers, depending of the application, respect their standards. The UTS series had thus been qualifi ed and is certifi ed by this organisation. In Europe and in Asia, IEC standards are better known and trusted by end users. Like its American equivalent, the IEC refers to safety rules. The UTS series was obviously designed to respect these rules. UTS series is rated at IP68/69K… even in dynamic conditions. This means that it remain sealed even when used continuously underwater or cleaned using a high pressure hose and cable is moving. This extreme level of performance is achievable with jacketed cable or discrete wires. If this same level of performance is required even when connectors are not mated, we have UTS Hi Seal; a product designed to remain watertight if an environmental cap is not fi tted or if the equipment is likely to get wet when cables have been disconnected. Screw termination version UTS series is a wide range... Based on multiple power & signal connectors and offers everything from box mounted receptacles and cable mounted plugs to cable mounted in-line and PCB mounted receptacles. Almost all ways to accommodate wires exist: Crimp, Solder, Screw termination. UTS Series Overview The bayonet coupling system makes it simple to use. With only a 1/3 twist of the coupling ring, connectors are mated with an audible and sensitive “click”. Overview 8 © 2011 – SOURIAU Just screw the wires to the connector ! No special tools required, use a standard screwdriver UTS screw termination UTS range UTS discrete wire sealing See page 9 Sealed: IP68/69K UV resistant UL/IEC compliant Corrosion-proof Plastic housing UTS Series Plug Corrosion-proof Plastic housing UTS Hi seal Sealed Unmated Sealed unmated: IP68/69K MIL-C-26482 compatible UV resistant UL/IEC compliant Screw termination contact Solder contact Crimp contact • machined • stamped and formed • coaxial • fibre optics UTS Series Overview © 2011 – SOURIAU 9 overview Metal hold down clips - to lock the connector easily on the PCB and to release stress on solder joints - suitable for soldering in a metalised hole Pre-assembled PCB contacts - machined or stamped versions available - different solder tails lengths possible - different plating options Low profi le housing to limit space between panel and PCB Stand-offs to allow cleaning after soldering UTS PCB contacts Receptacle No fi ller plug needed Grommet Containment ring Backnut or Easy handling backshell UTS discrete wire sealing Double Sealing UTS Series Overview Overview 10 © 2011 – SOURIAU General technical Mechanical • Durability: 250 matings & unmatings per MIL-C-26482 • Vibration resistance (all UTS versions except UTS Screw termination contacts): Sinusoidal vibrations per CEI 60512-4 - from 10 to 2000 Hz • Thermal shock: 5 cycles 30 min. from -40°C to 105°C per MIL-STD1344 method 1003 Environmental • Operating temperature: from -40°C to +105°C 40/100/21 per NFF 61-030 • Flammability rating: UL94-V0 (all UTS except the Hi seal) - see page 165 UL94-HB (UTS Hi seal only) - see page 165 I2F3 according to NFF 16101 and NFF 16102 • Salt spray: 500 hours • UV resistant: No mechanical degradation or important variation of colour after 5 years of exposure in natural environment (equivalence exposure to sun and moisture as per ISO4892) • Sealing: - UTS Standard: IP68/IP69K (mated) - UTS Hi seal: IP68/IP69K (mated and unmated) - UTS Discrete wire sealing: IP67/69K (up to IP68 with easy handling backshell) - UTS Screw termination contacts: IP68/IP69K Note: IPx8: 10m underwater during 1 week • Fluid resistance: - Gasoil - Mineral oil - Acid bath - Basic bath 1 2 3 4 5 1 3 UTS Series Overview © 2011 – SOURIAU 11 characteristics Material • Body connector + Backshell: Thermoplastic • Insert: - UTS Standard, UTS Discrete wire sealing, UTS Screw termination contacts: Thermoplastic - UTS Hi seal handsolder & UTS Hi seal with PC tails contacts: Elastomer • Contacts: See page 140 • Nut: Metal • Halogen free • RoHS compliant & conform to the Chinese standard SJ/T1166-2006 (Chinese RoHS equivalent) • In accordance with: - UL 1977: Certifi cat ECBT2 File number: E169916 - CSA C22.2 n°182.3: Certifi cat ECBT8 File number: E169916 Electrical • See each layout page 1 2 4 5 UTS Series Overview Overview UTS Series © 2011 – SOURIAU 13 UTS Series Mechanics Cable assembly ................................................................................................. 14 2 contacts 8E2/8D2: 7A 32V ............................................................................................. 20 12E2/12D2: 16A 150V ............................................................................................ 24 2 contacts + ground 103: 16A 300V ............................................................................................ 28 142G1: 40A 300V ............................................................................................ 32 3 contacts 8E3/8D3: 7A 32V ............................................................................................. 36 8E3A/8E98 8D3A/8D98: 7A 50V ............................................................................................. 40 8E33/8D3.: 7A 50V ............................................................................................. 44 12E3/12D3: 16A 150V ............................................................................................ 48 3 contacts + ground 124 - 12E4/12D4: 16A 300V ............................................................................................ 52 183G1: 32A 300V ............................................................................................ 56 4 contacts 8E4/8D4: 7A 32V ............................................................................................. 60 102W2: 25A 150V ............................................................................................ 64 104: 13A 150V ............................................................................................ 68 5 contacts 14E5/14D5: 16A 150V ............................................................................................ 72 6 contacts 103W3: 5A 32V ............................................................................................. 76 106 - 10E6/10D6: 7A 32V ............................................................................................. 80 10E98/10D98: 7A 50V ............................................................................................. 84 6 contacts + ground 147 - 14E7: 16A 300V ............................................................................................ 88 7 contacts 10E7/10D7: 7A 50V ............................................................................................. 92 8 contacts 128: 10A 80V ............................................................................................. 96 12E8/12D8: 6A 32V ............................................................................................. 100 10 contacts 1210 - 12E10/12D10: 6A 50V ............................................................................................. 104 12 contacts 1412: 10A 63V ............................................................................................. 108 14E12/14D12: 4A 50V ............................................................................................. 112 14 contacts 12E14/12D14: 5A 32V ............................................................................................. 116 15 contacts 14E15/14D15: 4A 50V ............................................................................................. 120 18 contacts 14E18/14D18: 5A 50V ............................................................................................. 124 19 contacts 1419 - 14E19/14D19: 5A 32V ............................................................................................. 128 23 contacts 1823: 9A 63V ............................................................................................. 132 32 contacts 1832: 4A 32V ............................................................................................. 136 14 © 2011 – SOURIAU OUTDOOR (black outer jacket) INDOOR Cable assembly Souriau provides connectors in various applications for more than 90 years in the most extreme environment. Being conscious about the diffi culty to fi nd a quick and a reliable harness manufacturer, we decided years ago to start in house cable assembly production. It allows customers to reduce the number of suppliers, and to take advantage of the "best in class" quality of the Souriau group. Overmoulding is a process that further enhances the sealing properties of the UTS range, especially over many years of use. Overmoulding provides the opportunity to change the cable exit from straight through 90 degrees and avoid any stress on the cable terminated to the connector. Also, as the wires are encapsulated inside the moulding, a barrier is created which prevents from any liquid from entering the equipment through the connector if the cable jacket is breached. UV resistance Ambient temperature PVC PUR PTFE FEP SILICON TPE 70°C Static installation Static installation Static installation Static installation Static installation Static or dynamic installation Wet Cleaner, Immerged chlorine 90°C 180°C 205°C 260°C Chemical agression How to choose the outer jacket material UTS Series Mechanics © 2011 – SOURIAU 15 Overmolding description Discrete connector Overmoulded connector Compound Thermoplastic insert O ring Overmolding adapter PVC or PUR overmolding ...water ingress unhampered, leading to damage. ...prevents water ingress via capillary action. If cable jacket is breached... If cable jacket is breached... UTS Series Mechanics Mechanics 16 © 2011 – SOURIAU UTS Series Mechanics Harnesses Overmoulded harnesses, straight ending Connector type Number of ways Voltage Current UL Current IEC Harmonised cable part number* Part number (length: 1m.) Male Female UTS standard 2+PE 600 V 44 A 40 A HO5 VV - F 3Gg10 HAUTS0V142G1PST100 HAUTS0V142G1SST100 2+PE 500 V 10 A 16 A HO5 VV - F 3x1.5 HAUTS0V103PST100 HAUTS0V103SST100 3+PE 500 V 10 A 16 A HO5 VV - F 3G1.5 HAUTS0V103PEPST100 HAUTS0V103PESST100 3+PE 250 V 24 A 32 A HO5 VV - F 40G0.5 HAUTS0V183G1PST100 HAUTS0V183G1SST100 3+PE 500 V 10 A 16 A HO5 VV - F 4G1.5 HAUTS0V124PEPST100 HAUTS0V124PESST100 4 500 V 10 A 13 A HO5 VV - F 4x1.5 HAUTS0V104PST100 HAUTS0V104SST100 3 500 V 10 A 5 A HO5 VV - F 7G0.5 HAUTS0V103W3PST100 HAUTS0V103W3SST100 6 250 V 5 A 7 A HO5 VV - F 7x0.5 HAUTS0V106PST100 HAUTS0V106SST100 6+PE 500 V 10 A 16 A HO5 VV - F 7G1.5 HAUTS0V147PEPST100 HAUTS0V147PESST100 8 500 V 10 A 10 A HO5 VV - F 8x1.5 HAUTS0V128PST100 HAUTS0V128SST100 10 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V1210PST100 HAUTS0V1210SST100 12 500 V 10 A 10 A HO5 VV - F 12x1.5 HAUTS0V1412PST100 HAUTS0V1412SST100 19 250 V 5 A 5 A HO5 VV - F 21G0.5 HAUTS0V1419PST100 HAUTS0V1419SST100 23 500 V 10 A 9 A HO5 VV - F 25G1.5 HAUTS0V1823PST100 HAUTS0V1823SST100 32 250 V 5 A 4 A HO5 VV - F 40G0.5 HAUTS0V1832PST100 HAUTS0V1832SST100 UTS Hi seal 2 250 V 7 A 7 A H05 VV - F 2x0.5 HAUTS0V8E2PST100 HAUTS0V8E2SST100 2 650 V 13 A 16 A HO5 VV - F 2x1.5 HAUTS0V12E2PST100 HAUTS0V12E2SST100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E3PST100 HAUTS0V8E3SST100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E3APST100 HAUTS0V8E3ASST100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E33PST100 HAUTS0V8E33SST100 3 650 V 13 A 16 A HO5 VV - F 3x1.5 HAUTS0V12E3PST100 HAUTS0V12E3SST100 4 250 V 7 A 7 A HO5 VV - F 4x0.5 HAUTS0V8E4PST100 HAUTS0V8E4SST100 5 650 V 12 A 16 A HO5 VV - F 4G1.5 HAUTS0V14E5PST100 HAUTS0V14E5SST100 6 250 V 5 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E6PST100 HAUTS0V10E6SST100 6 250 V 6 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E98PST100 HAUTS0V10E98SST100 6+PE 500 V 10 A 16 A HO5 VV - F 7G1.5 HAUTS0V14E7PEPST100 HAUTS0V14E7PESST100 7 250 V 6 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E7PST100 HAUTS0V10E7SST100 8 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V12E8PST100 HAUTS0V12E8SST100 10 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V12E10PST100 HAUTS0V12E10SST100 12 250 V 5 A 4 A HO5 VV - F 12G0.5 HAUTS0V14E12PST100 HAUTS0V14E12SST100 14 250 V 5 A 5 A HO5 VV - F 14G0.5 HAUTS0V12E14PST100 HAUTS0V12E14SST100 15 650 V 12 A 4 A HO5 VV - F 18G0.5 HAUTS0V14E15PST100 HAUTS0V14E15SST100 18 250 V 4 A 4 A HO5 VV - F 18G0.5 HAUTS0V14E18PST100 HAUTS0V14E18SST100 19 250 V 4 A 5 A HO5 VV - F 40G0.5 HAUTS0V14E19PST100 HAUTS0V14E19SST100 * see page 18 3 m & 5 m version available on demand Eg: 3m HAUTS0V...300 5m HAUTS0V...500 © 2011 – SOURIAU 17 UTS Series Mechanics Harnesses Overmoulded harnesses, right angle ending Connector type Number of ways Voltage Current UL Current IEC Harmonised cable part number* Part number (length: 1m.) Male Female UTS standard 2+PE 600 V 44 A 40 A HO5 VV - F 3Gg10 HAUTS0V142G1PRA100 HAUTS0V142G1SRA100 2+PE 500 V 10 A 16 A HO5 VV - F 3x1.5 HAUTS0V103PRA100 HAUTS0V103SRA100 3+PE 500 V 10 A 16 A HO5 VV - F 3G1.5 HAUTS0V183G1PRA100 HAUTS0V183G1SRA100 3+PE 250 V 24 A 32 A HO5 VV - F 40G0.5 HAUTS0V183G1PRA100 HAUTS0V183G1SRA100 3+PE 500 V 10 A 16 A HO5 VV - F 4G1.5 HAUTS0V124PEPRA100 HAUTS0V124PESRA100 4 500 V 10 A 13 A HO5 VV - F 4x1.5 HAUTS0V104PRA100 HAUTS0V104SRA100 3 500 V 10 A 5 A HO5 VV - F 7G0.5 HAUTS0V103W3PRA100 HAUTS0V103W3SRA100 6 250 V 5 A 7 A HO5 VV - F 7x0.5 HAUTS0V106PRA100 HAUTS0V106SRA100 6+PE 500 V 10 A 16 A HO5 VV - F 7G1.5 HAUTS0V147PEPRA100 HAUTS0V147PESRA100 8 500 V 10 A 10 A HO5 VV - F 8x1.5 HAUTS0V128PRA100 HAUTS0V128SRA100 10 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V1210PRA100 HAUTS0V1210SRA100 12 500 V 10 A 10 A HO5 VV - F 12x1.5 HAUTS0V1412PRA100 HAUTS0V1412SRA100 19 250 V 5 A 5 A HO5 VV - F 21G0.5 HAUTS0V1419PRA100 HAUTS0V1419SRA100 23 500 V 10 A 9 A HO5 VV - F 25G1.5 HAUTS0V1823PRA100 HAUTS0V1823SRA100 32 250 V 5 A 4 A HO5 VV - F 40G0.5 HAUTS0V1832PRA100 HAUTS0V1832SRA100 UTS Hi seal 2 250 V 7 A 7 A H05 VV - F 2x0.5 HAUTS0V8E2PRA100 HAUTS0V8E2SRA100 2 650 V 13 A 16 A HO5 VV - F 2x1.5 HAUTS0V12E2PRA100 HAUTS0V12E2SRA100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E3PRA100 HAUTS0V8E3SRA100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E3APRA100 HAUTS0V8E3ASRA100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E33PRA100 HAUTS0V8E33SRA100 3 650 V 13 A 16 A HO5 VV - F 3x1.5 HAUTS0V12E3PRA100 HAUTS0V12E3SRA100 4 250 V 7 A 7 A HO5 VV - F 4x0.5 HAUTS0V8E4PRA100 HAUTS0V8E4SRA100 5 650 V 12 A 16 A HO5 VV - F 4G1.5 HAUTS0V14E5PRA100 HAUTS0V14E5SRA100 6 250 V 5 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E6PRA100 HAUTS0V10E6SRA100 6 250 V 6 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E98PRA100 HAUTS0V10E98SRA100 6+PE 500 V 10 A 16 A HO5 VV - F 7G1.5 HAUTS0V14E7PEPRA100 HAUTS0V14E7PESRA100 7 250 V 6 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E7PRA100 HAUTS0V10E7SRA100 8 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V12E8PRA100 HAUTS0V12E8SRA100 10 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V12E10PRA100 HAUTS0V12E10SRA100 12 250 V 5 A 4 A HO5 VV - F 12G0.5 HAUTS0V14E12PRA100 HAUTS0V14E12SRA100 14 250 V 5 A 5 A HO5 VV - F 14G0.5 HAUTS0V12E14PRA100 HAUTS0V12E14SRA100 15 650 V 12 A 4 A HO5 VV - F 18G0.5 HAUTS0V14E15PRA100 HAUTS0V14E15SRA100 18 250 V 4 A 4 A HO5 VV - F 18G0.5 HAUTS0V14E18PRA100 HAUTS0V14E18SRA100 19 250 V 4 A 5 A HO5 VV - F 40G0.5 HAUTS0V14E19PRA100 HAUTS0V14E19SRA100 * see page 18 3 m & 5 m version available on demand Eg: 3m HAUTS0V...300 5m HAUTS0V...500 Mechanics 18 © 2011 – SOURIAU UTS Series Mechanics Standardization of European cable - DIN VDE 0281/DIN VDE 0282/DIN VDE 0292 1. Basic type 2. Working voltage 3. Insulating 4. Sheathcladding material 5. Special features 6. Conductor types 7. Number of conductors 8. Protective conductor 9. Conductor crosssectional H: Harmonized Type 03: 300/300 V. V: PVC V: PVC H: Ribbon cable, separable U: Single wire X: Without protective conductor Area specifi ed in mm2 A: National Type 05: 300/500 V. R: Rubber R: Rubber H2: Ribbon cable non-separable R: Multi-wire G: With protective conductor 07: 450/750 V. S: Silicone Rubber N: Cloroprene Rubber K: Fine wire (permanently installed) J: Glass-fi lament braiding F: Fine wire (fl exible) T: Textile braiding H: Super fi ne wire Y: Tinsel strand 1 2 3 4 5 6 7 8 9 Harmonized wire coding system Example: Harmonized type, 300/500V, PVC insulating, PVC sheath- cladding, Fine wire, 3x1.5 cross-sectional: H05VVF3x1.5 Cable information Range of temperature: Occasional fl exing: -5°C up to +70°C Fixed installation: -40°C up to +80°C Rated voltage: U0/U: 300/500 V Wire section : Arrangement with #16 contact: wire section 1.5 mm² Arrangement with #20 contact: wire section 0.5 mm² Harmonized reference: H05 VVF XX © 2011 – SOURIAU 19 UTS Series Mechanics Standardization of American cable Nomenclature Key Defi nitions of Cable Types S: Service Grade (also means extra hard service when not followed by J, V, or P) J: Hard Service V: Vacuum cleaner cord (also light duty cable) P: Parallel cord (also known as zip cord) – Always light duty E: Thermoplastic Elastomer (UL/NEC designation ONLY) O: Oil Resistant* T: Thermoplastic W: Outdoor-includes sunlight resistant jacket and wet location rated conductors (formerly "W-A") H: Heater cable VW-1: Flame retardant FT2: Flame retardant SVT: Thermoplastic insulated vacuum cleaner cord, with or without 3rd conductor for grounding purposes; 300V. (PVC) SJT: Junior hard service, thermoplastic insulated conductors and jacket. 300V. (PVC) SJTW: Same as SJT except outdoor rated. (PVC) SJTO: Same as SJT but oil resistant outer jacket. (PVC) SJTOW: Same as SJTO except outdoor rated. (PVC) ST: Hard service cord with all thermoplastic construction, 600V. (PVC) STW: Same as ST except outdoor rated. (PVC) STO: Same as ST but with oil resistant outer jacket. (PVC) STOW: Same as STO except outdoor rated. (PVC) Mechanics 20 © 2011 – SOURIAU OR OR WITH Layout Specifi cations UTS Series 8E2/8D2 Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS08E2P UTS08E2S Plug Without (Fig.6) UTS68E2P UTS68E2S Cable gland (Fig.7) UTS6JC8E2P UTS6JC8E2S Jam nut receptacle Without (Fig.3) UTS78E2P UTS78E2S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS08D2P UTS08D2S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS78D2P32 UTS78D2S32 Jam nut receptacle with stand off and withouthold down clip Without (Fig.4) UTS78D2P UTS78D2S Sealed unmated © 2011 – SOURIAU 21 Dimensions Note: all dimensions are in mm UTS Series 8E2/8D2 Square fl ange receptacle - UTS0 Front view 11.7 11.7 20.7 Ø12 Ø12 15.3 2.4 2.4 Ø3.2 7.5 7.5 7.8 Fig. 1 Fig. 2 Jam nut receptacle - UTS7 Front view 24.2 24.2 18 Ø12 3.5 3.4 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø12 3.5 3.4 18 Ø12 3.5 3.4 Plug - UTS6 25.3 54 Fig. 7 Fig. 6 Ø22.5 Mated connector length 61.1 66.6 UTS7 UTS0 Drilling pattern 1.5 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 1.5 Panel cut out 15.3 15.3 Ø3.3 Square fl ange receptacle - UTS0 Jam nut receptacle - UTS7 13.7 14.6 Front mounting Ø12.5 Rear mounting Ø14.5 Mechanics 2 contacts 7A/32V per IEC 61984 22 © 2011 – SOURIAU Jam nut sealing caps Square fl ange sealing cap Plug protective cap Accessories Electrical characteristics UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 32V 1.5kV 3 UTS 8E2/8D2 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² 0 20 40 60 80 100 120 0 6 10 18 Current (A) Ambient Operating Temperature (°C) 12 14 16 2 4 8 Metal terminal IP40 Part number UTS8DCGE Part number UTS68C Metal terminal Part number UTS8DCG Part number UTS8DCGR UTS Series 8E2/8D2 Part numbers Receptacle cap Plug cap 85005585A 85005594 Plastic protective cap Part numbers / neoprene UTFD11B Gasket Current use Limited use Not recommended use © 2011 – SOURIAU 23 UTS Series 8E2/8D2 Mechanics 24 © 2011 – SOURIAU OR WITH OR Layout UTS Series 12E2/12D2 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS012E2P UTS012E2S Plug Without (Fig.6) UTS612E2P UTS612E2S Cable gland (Fig.7) UTS6JC12E2P UTS6JC12E2S Jam nut receptacle Without (Fig.3) UTS712E2P UTS712E2S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS012D2P UTS012D2S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS712D2P32 UTS712D2S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS712D2P UTS712D2S Sealed unmated © 2011 – SOURIAU 25 UTS Series 12E2/12D2 Dimensions Note: all dimensions are in mm 2 contacts 16A/150V per IEC 61984 Square fl ange receptacle - UTS0 Front view 11.7 11.7 26.4 Ø19 Ø19 20.8 2.4 2.4 Ø3.2 7.5 7.5 7.8 Fig. 1 Fig. 2 Plug - UTS6 Mated connector length 25.3 66.7 75.3 81.7 Fig. 7 Fig. 6 Ø30.1 UTS7 UTS0 Panel cut out Drilling pattern 20.8 15.3 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 2.3 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 2.3 1.4 Square fl ange receptacle - UTS0 22° Front mounting Ø18.3 Rear mounting Ø22.3 Jam nut receptacle - UTS7 Front view 27.2 31.9 18 18 18 Ø19 Ø19 Ø19 3.5 3.5 3.5 3 3 3 4.2 Fig. 3 Fig. 4 Fig. 5 Mechanics 26 © 2011 – SOURIAU Metal terminal UTS Series 12E2/12D2 Accessories Metal terminal 0 20 40 60 80 100 120 0 10 20 30 Current (A) Ambient Operating Temperature (°C) Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG G for Green Y for Yellow R for Red Plug sealing cap Square fl ange sealing cap Part number UTS612DCG Part number UTS12DCGE Jam nut sealing caps Part number UTS12DCG Part number UTS12DCGR Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket Electrical characteristics UL 13A 650V UL94 HB CSA 13A 650V UL94 HB IEC 16A 150V 2.5kV 3 UTS 12E2/12D2 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use © 2011 – SOURIAU 27 UTS Series 12E2/12D2 Mechanics 28 © 2011 – SOURIAU OR OR WITH Layout UTS Series 103 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 31 Free hanging receptacle Cable gland (Fig.1) UTS1JC103P UTS1JC103S Plug Without (Fig.2) UTS6103P UTS6103S Cable gland (Fig.3) UTS6JC103P UTS6JC103S PCB contacts supply separately see page 31 Jam nut receptacle Without (Fig.4) UTS7103P UTS7103S © 2011 – SOURIAU 29 UTS Series 103 Dimensions Note: all dimensions are in mm 2 + ground 16A/300V per IEC 61984 Free hanging - UTS1 70 Ø15.1 Fig. 1 Mated connector length - UTS7 77.3 Jam nut receptacle - UTS7 Fig. 4 18.3 12.3 27.2 22.5 Ø15.1 3.5 Panel cut out Drilling pattern Jam nut receptacle - UTS7 16.7 17.9 2.6 2.6 1.5 3 Plug - UTS6 Female Male Fig. 2 Fig. 3 33 63.2 25.3 Ø26.2 Ø26.2 Mechanics 30 © 2011 – SOURIAU UTS Series 103 Accessories and tooling Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J (1): example of plating, for other plating see UTS catalog page 143 Jam nut sealing caps Metal terminal Part number UTS10DCG Part number UTS10DCGR Plug sealing cap Part number UTS610DCG Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG G for Green Y for Yellow R for Red Handle Tool kit Part number TOOLKIT Part number SHANDLES © 2011 – SOURIAU 31 Contacts UTS Series 103 UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 16A 300V 4kV 3 Temperature elevation: 50°C Electrical characteristics UTS 103 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 120 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 2 + ground 16A/300V per IEC 61984 32 © 2011 – SOURIAU OR WITH OR OR UTS Series 142G1 Specifi cations Layout Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supplied separately see page 35 Square fl ange receptacle Without (Fig. 1) UTS0142G1P Free hanging receptacle Cable gland (Fig. 6) UTS1JC142G1P UTS1JC142G1S Plug Without (Fig. 3) UTS6142G1P UTS6142G1S Cable gland (Fig. 4) UTS6JC142G1P UTS6JC142G1S Jam nut receptacle Without (Fig. 2) UTS7142G1P UTS7142G1S NPT threaded receptacle Without (Fig. 5) UTS7142G1SNPT © 2011 – SOURIAU 33 UTS Series 142G1 NPT threaded receptacle - UTS7 Dimensions Note: all dimensions are in mm Plug - UTS6 Female Male Fig. 3 Fig. 4 33 70 25.3 Ø31.5 Ø35.1 Square fl ange receptacle - UTS0 Free hanging - UTS1 70 Ø31.5 Fig. 6 Jam nut receptacle - UTS7 Fig. 2 18 1.6 35.1 30.4 Ø22.3 3.5 Panel cut out Jam nut receptacle - UTS7 24.15 25.55 Drilling pattern 3.6 3.6 2.1 4.2 Fig. 5 25.4 25.4 35.3 Ø22.3 23.1 NPT - 1/2˝ 11.7 Ø19 2.4 7.5 Fig. 1 20.8 26.4 Ø3.2 Fig. 1 Front view Mechanics 2 + ground 40A/300V per IEC 61984 34 © 2011 – SOURIAU UTS Series 142G1 Accessories and tooling Jam nut sealing caps Metal terminal Part number UTS14DCG Part number UTS14DCGR Hand tool Part number M317 Positioner + locator setting Part number VGE10078A Extraction tool Part number 51060210936 Plug sealing cap Part number UTS614DCG Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG G for Green Y for Yellow R for Red © 2011 – SOURIAU 35 UL 44A 600V UL94 V-0 CSA 30A 600V UL94 V-0 IEC 40A 300V 4kV 3 Electrical characteristics UTS 142G1 derating curves Current use Limited use Not recommended use UTS Series 142G1 Test conditions Contact used: Machined contacts Wires used: 8.37mm² 0 20 40 60 80 100 120 0 10 15 20 25 30 35 40 45 50 Current (A) Ambient Operating Temperature (°C) 5 Contacts #8 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 16 82913601A(1) 82913600A(1) - 6.5 14 82913603A(1) 82913602A(1) - 12 82913605A(1) 82913604A(1) - 10 82913607A(1) 82913606A(1) - 8 82913609A(1) 82913608A(1) - (1): Example of plating, for other plating see page 143 Mechanics 2 + ground 40A/300V per IEC 61984 36 © 2011 – SOURIAU OR WITH OR UTS Series 8E3/8D3 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS08E3P UTS08E3S Plug Without (Fig.6) UTS68E3P UTS68E3S Cable gland (Fig.7) UTS6JC8E3P UTS6JC8E3S Jam nut receptacle Without (Fig.3) UTS78E3P UTS78E3S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS08D3P UTS08D3S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS78D3P32 UTS78D3S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS78D3P UTS78D3S Layout Sealed unmated © 2011 – SOURIAU 37 UTS Series 8E3/8D3 Dimensions Note: all dimensions are in mm 3 contacts 7A/32V per IEC 61984 Square fl ange receptacle - UTS0 Front view 11.7 11.7 20.7 Ø12 Ø12 15.3 2.4 2.4 Ø3.2 7.5 Fig. 1 Fig. 2 7.5 7.8 Plug - UTS6 25.3 54 Fig. 7 Fig. 6 Ø22.5 Mated connector length 61.1 66.6 UTS7 UTS0 Panel cut out Drilling pattern 15.3 15.3 Ø3.3 Jam nut receptacle - UTS7 13.7 14.6 1.6 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 1.6 1.9 0.9 Square fl ange receptacle - UTS0 Front mounting Ø12.5 Rear mounting Ø14.5 Jam nut receptacle - UTS7 Front view 24.2 24.2 18 Ø12 3.5 3.4 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø12 3.5 3.4 18 Ø12 3.5 3.4 Mechanics 38 © 2011 – SOURIAU UTS 8E3/8D3 derating curves UTS Series 8E3/8D3 Test conditions Contact used: Machined contacts Wires used: 0.518mm² 0 20 40 60 80 100 120 0 6 10 18 Current (A) Ambient Operating Temperature (°C) 12 14 16 2 4 8 Jam nut sealing caps Square fl ange sealing cap Plug protective cap Accessories Electrical characteristics Metal terminal IP40 Part number UTS8DCGE Part number UTS68C Metal terminal Part number UTS8DCG Part number UTS8DCGR Part numbers Receptacle cap Plug cap 85005585A 85005594 Plastic protective cap Part numbers / neoprene UTFD11B Gasket UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 32V 1.5kV 3 Current use Limited use Not recommended use © 2011 – SOURIAU 39 UTS Series 8E3/8D3 Mechanics 40 © 2011 – SOURIAU OR WITH OR UTS Series 8E3A/8E98 - 8D3A/8D98 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS08E3AP UTS08E3AS UTS08E98P UTS08E98S Plug Without (Fig.6) UTS68E3AP UTS68E3AS UTS68E98P UTS68E98S Cable gland (Fig.7) UTS6JC8E3AP UTS6JC8E3AS UTS6JC8E98P UTS6JC8E98S Jam nut receptacle Without (Fig.3) UTS78E3AP UTS78E3AS UTS78E98P UTS78E98S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS08D3AP UTS08D3AS UTS08D98P UTS08D98S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS78D3AP32 UTS78D3AS32 UTS78D98P32 UTS78D98S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS78D3AP UTS78D3AS UTS78D98P UTS78D98S Layout Sealed unmated © 2011 – SOURIAU 41 UTS Series 8E3A/8E98 - 8D3A/8D98 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 24.2 24.2 18 Ø12 3.5 3 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø12 3.5 3 18 Ø12 3.5 3 Square fl ange receptacle - UTS0 Front view 11.7 11.7 20.7 Ø12 Ø12 15.3 2.4 2.4 Ø3.2 7.5 Fig. 1 Fig. 2 7.5 7.8 Panel cut out Drilling pattern 15.3 15.3 Ø3.3 Jam nut receptacle - UTS7 13.7 14.6 1.6 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 1.6 1.9 0.9 Square fl ange receptacle - UTS0 Front mounting Ø12.5 Rear mounting Ø14.5 Plug - UTS6 Mated connector length 25.3 54 Fig. 7 Fig. 6 Ø22.5 66.6 UTS7 UTS0 61.1 Mechanics 3 contacts 7A/50V per IEC 61984 42 © 2011 – SOURIAU UTS Series 8E3A/8E98 - 8D3A/8D98 UTS 8E3A/98 - 8D3A/98 derating curves Jam nut sealing caps Square fl ange sealing cap Plug protective cap Accessories Electrical characteristics Metal terminal IP40 Part number UTS8DCGE Part number UTS68C Metal terminal Part number UTS8DCG Part number UTS8DCGR Part numbers Receptacle cap Plug cap 85005585A 85005594 Plastic protective cap Part numbers / neoprene UTFD11B Gasket UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 50V 1.5kV 3 Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 6 10 18 Current (A) Ambient Operating Temperature (°C) 12 14 16 2 4 8 Test conditions Contact used: Machined contacts Wires used: 0.518mm² © 2011 – SOURIAU 43 UTS Series 8E3A/8E98 - 8D3A/8D98 Mechanics 44 © 2011 – SOURIAU OR WITH OR UTS Series 8E33/8D33 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS08E33P UTS08E33S Plug Without (Fig.6) UTS68E33P UTS68E33S Cable gland (Fig.7) UTS6JC8E33P UTS6JC8E33S Jam nut receptacle Without (Fig.3) UTS78E33P UTS78E33S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS08D33P UTS08D33S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS78D33P32 UTS78D33S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS78D33P UTS78D33S Layout Sealed unmated © 2011 – SOURIAU 45 UTS Series 8E33/8D33 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 24.2 24.2 18 Ø12 3.5 3.4 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø12 3.5 3.4 18 Ø12 3.5 3.4 Square fl ange receptacle - UTS0 Front view 11.7 11.7 20.7 Ø12 Ø12 15.3 2.4 2.4 Ø3.2 7.5 Fig. 1 Fig. 2 7.5 7.8 Plug - UTS6 Mated connector length 25.3 54 61.1 66.6 Fig. 7 UTS7 Fig. 6 Ø22.5 UTS0 Panel cut out Drilling pattern 15.3 15.3 Ø3.3 Jam nut receptacle - UTS7 13.7 14.6 1.6 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 1.6 1.9 0.9 Square fl ange receptacle - UTS0 Front mounting Ø12.5 Rear mounting Ø14.5 Mechanics 3 contacts 7A/50V per IEC 61984 46 © 2011 – SOURIAU UTS Series 8E33/8D33 UTS 8E33/8D33 de-rating curves Jam nut sealing caps Square fl ange sealing cap Plug protective cap Accessories Electrical characteristics Metal terminal IP40 Part number UTS8DCGE Part number UTS68C Metal terminal Part number UTS8DCG Part number UTS8DCGR Part numbers Receptacle cap Plug cap 85005585A 85005594 Plastic protective cap Part numbers / neoprene UTFD11B Gasket UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² 0 20 40 60 80 100 120 0 6 10 18 Current (A) Ambient Operating Temperature (°C) 12 14 16 2 4 8 © 2011 – SOURIAU 47 UTS Series 8E33/8D33 Mechanics 48 © 2011 – SOURIAU UTS Series 12E3/12D3 OR WITH Specifi cations OR Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS012E3P UTS012E3S Plug Without (Fig.1) UTS612E3P UTS612E3S Cable gland (Fig.2) UTS6JC12E3P UTS6JC12E3S Jam nut receptacle Without (Fig.3) UTS712E3P UTS712E3S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS012D3P UTS012D3S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS712D3P32 UTS712D3S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS712D3P UTS712D3S Layout Sealed unmated © 2011 – SOURIAU 49 UTS Series 12E3/12D3 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 27.2 31.9 18 Ø19 3.5 3 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø19 3.5 3 18 Ø19 3.5 3 Plug - UTS6 Fig. 1 Fig. 2 66.7 Ø30.1 Ø30.1 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.7 Ø19 2.4 7.5 7.8 20.8 26.4 Ø3.2 Front view 75.3 81.7 UTS7 UTS0 Panel cut out Drilling pattern 20.8 20.8 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 2.3 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 2.3 2.8 1.4 Square fl ange receptacle - UTS0 22° Front mounting Ø18.3 Rear mounting Ø22.3 7 Mechanics 3 contacts 16A/150V per IEC 61984 50 © 2011 – SOURIAU UTS Series 12E3/12D3 Metal terminal Accessories Metal terminal Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG G for Green Y for Yellow R for Red Plug sealing cap Square fl ange sealing cap Part number UTS612DCG Part number UTS12DCGE Jam nut sealing caps Part number UTS12DCG Part number UTS12DCGR Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket Electrical characteristics UL 13A 650V UL94 HB CSA 13A 650V UL94 HB IEC 16A 150V 2.5kV 3 UTS 12E3/12D3 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 10 30 Current (A) Ambient Operating Temperature (°C) 20 © 2011 – SOURIAU 51 UTS Series 12E3/12D3 Mechanics 52 © 2011 – SOURIAU OR OR WITH OR UTS Series 124 - 12E4/12D4 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 55 Square fl ange receptacle Without (Fig.1) UTS0124P Jam nut receptacle Without (Fig.5) UTS7124P UTS7124S Free hanging receptacle Cable gland (Fig.13) UTS1JC124P UTS1JC124S Plug Without (Fig.11) UTS6124P UTS6124S Cable gland (Fig.12) UTS6JC124P UTS6JC124S Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.3) UTS012E4P UTS012E4S Jam nut receptacle Without (Fig.10) UTS712E4P UTS712E4S Plug Without (Fig.11) UTS612E4P UTS612E4S Plug Cable gland (Fig.12) UTS6JC12E4P UTS6JC12E4S Screw contacts loaded Jam nut receptacle Without (Fig.7 & 8) UTS7124PSCR UTS7124SSCR Plug Without (Fig.11) UTS6124PSCR UTS6124SSCR Cable gland (Fig.12) UTS6JC124PSCR UTS6JC124SSCR Free hanging receptacle Cable gland (Fig.13) UTS1JC124PSCR PCB contacts supply separately see page 55 Square fl ange receptacle Without (Fig.4) UTS0124P Jam nut receptacle Without (Fig.6) UTS7124P UTS7124S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS012D4P UTS012D4S Jam nut receptacle with stand off and without hold down clip Without (Fig.9) UTS712D4P UTS712D4S Jam nut receptacle with stand off and with hold down clips Without (Fig.9) UTS712D4P32 UTS712D4S32 Layout Sealed unmated © 2011 – SOURIAU 53 UTS Series 124 - 12E4/12D4 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Hold down clip Male Female Fig. 6 Fig. 8 Fig. 10 Front view Fig. 5 Fig. 7 Fig. 9 31.9 18 18 18 27.2 Ø19 Ø19 Ø19 3.5 3.5 3.5 2.4 2.4 4.2 3 Square fl ange receptacle - UTS0 11.7 11.7 11.7 Ø19 Ø19 Ø19 20.8 26.4 2.4 2.4 4 2.4 7.5 9.1 7.5 Ø3.2 Fig. 3 Fig. 4 Front view Fig. 2 Fig. 1 7.5 7.8 Free hanging - UTS1 / Plug - UTS6 Mated connector length 25.3 74 66.7 Fig. 13 Fig. 11 Fig. 12 Ø30.1 75.3 81.7 UTS7 UTS0 Panel cut out Drilling pattern 20.8 20.8 Front mounting Ø18.3 Ø3.3 Rear mounting Ø22.3 Jam nut receptacle - UTS7 21.4 22.7 3.1 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 3.1 3.1 3.1 Square fl ange receptacle - UTS0 22° Mechanics 3 + ground 16A/300V per IEC 61984 54 © 2011 – SOURIAU Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red UTS Series 124 - 12E4/12D4 Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS12DCG Part number UTS12DCGR Plug sealing cap Square fl ange sealing cap Part number UTS612DCG Part number UTS12DCGE Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket Color coding rings Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 55 UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 16A 300V 4kV 3 Temperature elevation: 50°C UTS Series 124 - 12E4/12D4 0 20 40 60 80 100 120 0 10 30 Current (A) Ambient Operating Temperature (°C) 20 18 15 13 28 25 23 8 5 3 Contacts Electrical characteristics UTS 124 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 3 + ground 16A/300V per IEC 61984 56 © 2011 – SOURIAU WITH Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 59 NPT threaded receptacle Without (Fig.1) UTS7183G1SNPT Plug Without (Fig.2) UTS6183G1P Plug Cable gland (Fig.3) UTS6JC183G1P Layout UTS Series 183G1 © 2011 – SOURIAU 57 Dimensions UTS Series 183G1 Note: all dimensions are in mm NPT threaded receptacle - UTS7 17.3 14.5 31.8 NPT - 3/4˝ Ø28.6 Ø19.6 Fig. 1 Plug - UTS6 Fig. 2 Fig. 3 37.5 81.3 Ø42 Ø42 Mated connector length - UTS6JC 90.5 Drilling pattern 5.1 5.1 5.1 5.1 Mechanics 3 + ground 32A/300V per IEC 61984 58 © 2011 – SOURIAU Accessories and tooling Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red UTS Series 183G1 Jam nut sealing caps Part number UTS14DCG Part number UTS14DCGR Hand tool Part number M317 Positioner + locator setting Part number VGE10078A Extraction tool Part number 51060210936 Part numbers Receptacle cap Plug cap 85005590A 85005599 Plastic protective cap Part numbers / neoprene UTFD14B Gasket Color coding rings Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG Plug sealing cap Part number UTS614DCG © 2011 – SOURIAU 59 UL 23A 600V UL94 V-0 CSA 23A 600V UL94 V-0 IEC 32A 300V 4kV 3 Electrical characteristics UTS 183G1 derating curves Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 8.37mm² UTS Series 183G1 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 50 Current (A) Ambient Operating Temperature (°C) Contacts #8 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 16 82913601A(1) 82913600A(1) - 6.5 14 82913603A(1) 82913602A(1) - 12 82913605A(1) 82913604A(1) - 10 82913607A(1) 82913606A(1) - 8 82913609A(1) 82913608A(1) - (1): Example of plating, for other plating see page 143 Mechanics 3 + ground 32A/300V per IEC 61984 60 © 2011 – SOURIAU OR OR WITH UTS Series 8E4/8D4 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS08E4P UTS08E4S Plug Without (Fig.6) UTS68E4P UTS68E4S Cable gland (Fig.7) UTS6JC8E4P UTS6JC8E4S Jam nut receptacle Without (Fig.3) UTS78E4P UTS78E4S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS08D4P UTS08D4S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS78D4P32 UTS78D4S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS78D4P UTS78D4S Layout Sealed unmated © 2011 – SOURIAU 61 UTS Series 8E4/8D4 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 24.2 24.2 18 Ø12 3.5 3.4 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø12 3.5 3.4 18 Ø12 3.5 3.4 Square fl ange receptacle - UTS0 Front view 11.7 11.7 20.7 Ø12 Ø12 15.3 2.4 2.4 Ø3.2 7.5 Fig. 1 Fig. 2 7.5 7.8 Plug - UTS6 Mated connector length 25.3 54 Fig. 7 Fig. 6 Ø22.5 61.1 66.6 UTS7 UTS0 Panel cut out Drilling pattern 15.3 15.3 Ø3.3 Jam nut receptacle - UTS7 13.7 14.6 1.4 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 1.4 1.4 1.4 Square fl ange receptacle - UTS0 Front mounting Ø12.5 Rear mounting Ø14.5 Mechanics 4 contacts 7A/32V per IEC 61984 62 © 2011 – SOURIAU UTS Series 8E4/8D4 UTS 8E4/8D4 derating curves Jam nut sealing caps Square fl ange sealing cap Plug protective cap Accessories Electrical characteristics Metal terminal IP40 Part number UTS8DCGE Part number UTS68C Metal terminal Part number UTS8DCG Part number UTS8DCGR Part numbers Receptacle cap Plug cap 85005585A 85005594 Plastic protective cap Part numbers / neoprene UTFD11B Gasket UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 32V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 16 18 Current (A) Ambient Operating Temperature (°C) © 2011 – SOURIAU 63 UTS Series 8E4/8D4 Mechanics 64 © 2011 – SOURIAU WITH UTS Series 102W2 (2x#12 + 2x#20) Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 67 Free hanging receptacle Cable gland (Fig.1) UTS1JC102W2P UTS1JC102W2S Plug Without (Fig.2) UTS6102W2P UTS6102W2S Plug Cable gland (Fig.3) UTS6JC102W2P UTS6JC102W2S Jam nut receptacle Without (Fig.4) UTS7102W2P UTS7102W2S Layout © 2011 – SOURIAU 65 UTS Series 102W2 (2x#12 + 2x#20) Dimensions Note: all dimensions are in mm Free hanging - UTS1 70 Ø15.1 Fig. 1 Plug - UTS6 Fig. 2 Male Fig. 2 Female Fig. 3 33 63.2 Ø26.2 Ø26.2 Ø26.2 25.3 Panel cut out Drilling pattern Jam nut receptacle - UTS7 16.7 17.9 3 3 3 3 Jam nut receptacle - UTS7 Mated connector length - UTS7 Fig. 4 18.3 27.2 22.5 Ø15.1 3.5 2.4 77.3 Mechanics 4 contacts 25A/150V per IEC 61984 66 © 2011 – SOURIAU UTS Series 102W2 (2x#12 + 2x#20) Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Jam nut sealing caps Part number UTS10DCG Part number UTS10DCGR Plug sealing cap Part number UTS610DCG Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket Color coding rings Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG Accessories and tooling Crimp tooling #20 Crimp tooling #12 Part number TOOLKIT Part number extraction tool 51060210924 (1): example of plating, for other plating see UTS catalog page 148 (2): contact reeled (3): loose contact Part number SHANDLES Contacts Contact size Part number of head RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RM RM/RC 20W3K(1) S20RM RM/RC 18W3K(1) S20RM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 Part number positioner + locator setting VGE10078A Part number hand tool M317 © 2011 – SOURIAU 67 UTS Series 102W2 (2x#12 + 2x#20) Contacts #20 Contact type AWG Part number Max insulator Ø Male Female Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) 1.58 22-20 RM20W3K(1) RC20W3K(1) 1.58 20-18 RM18W3K(1) RC18W3K(1) 2.1 stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) 0.89-1.58 26-24 SM24W3S26(2) SC24W3S25(2) 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) 1.17-2.08 22-20 SM20W3S26(2) SC20W3S25(2) 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 1) E l f l ti f th l ti #12 Crimp Machined 22 82911457NA 82911456A 4.9 20 82911459NA 82911458A 18 82911461NA 82911460A 16 82911463NA 82911462A 14 82911465NA 82911464A 12 82911467NA 82911466A UL 20A 500V UL94 V-0 CSA 18A 500V UL94 V-0 IEC 25A 150V 2.5kV 3 Temperature elevation: 50°C Electrical characteristics UTS 102W2 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 50 Current (A) Ambient Operating Temperature (°C) Mechanics 4 contacts 25A/150V per IEC 61984 68 © 2011 – SOURIAU OR OR OR WITH OR UTS Series 104 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contact supply separately see next page 71 Square fl ange receptacle Without (Fig.1) UTS0104P UTS0104S Free hanging receptacle Cable gland and grommet (Fig.2) UTS1GJC104P Free hanging receptacle Nut and grommet (Fig.3) UTS1GN104P Free hanging receptacle Cable gland (Fig.2) UTS1JC104P UTS1JC104S Plug Without (Fig.4) UTS6104P UTS6104S Plug Cable gland and grommet (Fig.5) UTS6GJC104S Plug Nut and grommet (Fig.6) UTS6GN104S Plug Cable gland (Fig.5) UTS6JC104P UTS6JC104S Jam nut receptacle Without (Fig.7) UTS7104P UTS7104S Jam nut receptacle Cable gland and grommet (Fig.9) UTS7GJC104P Jam nut receptacle Nut and grommet (Fig.8) UTS7GN104P Layout © 2011 – SOURIAU 69 UTS Series 104 Dimensions Note: all dimensions are in mm Square fl ange receptacle - UTS0 Free hanging - UTS1 11.5 70 40.9 Ø15.1 Ø15.1 20.8 24 2.4 10.5 Ø3.2 Fig. 1 Front view Fig. 3 Fig. 2 Plug - UTS6 Female Male Fig. 4 Fig. 5 Fig. 6 33 63.2 32.5 25.3 Ø26.2 Ø26.2 Ø26.2 Panel cut out Drilling pattern 18.5 18.5 Ø3.3 Jam nut receptacle - UTS7 16.7 17.9 3 3 3 3 Front mounting Ø15.2 Rear mounting Ø17.9 Square fl ange receptacle - UTS0 Jam nut receptacle - UTS7 Mated connector length Fig. 7 Fig. 9 Fig. 8 18.3 18.3 41 70.7 Ø15.1 Ø15.1 3.5 3.5 2.4 70.9 77.3 UTS7 UTS0 Mechanics 4 contacts 13A/150V per IEC 61984 70 © 2011 – SOURIAU UTS Series 104 Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS10DCG Part number UTS10DCGR Plug sealing cap Square fl ange sealing cap Part number UTS610DCG Part number UTS10DCGE Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket Color coding rings Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 71 UTS Series 104 Contacts UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 13A 150V 2.5kV 3 Electrical characteristics UTS 104 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 120 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 4 contacts 13A/150V per IEC 61984 72 © 2011 – SOURIAU OR WITH OR UTS Series 14E5/14D5 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS014E5P UTS014E5S Plug Without (Fig.1) UTS614E5P UTS614E5S Cable gland (Fig.2) UTS6JC14E5P UTS6JC14E5S Jam nut receptacle Without (Fig.3) UTS714E5P UTS714E5S PCB contacts loaded Square fl ange receptacle Without (Fig.6) UTS014D5P UTS014D5S Jam nut receptacle with hold down clips Without (Fig.4) UTS714D5P32 UTS714D5S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS714D5P UTS714D5S Layout Sealed unmated © 2011 – SOURIAU 73 UTS Series 14E5/14D5 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 30.4 35.1 18 Ø22.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø22.3 3.5 3 18 Ø22.3 3.5 3 Plug - UTS6 Fig. 1 Fig. 2 70 Ø35.1 Ø35.1 25.3 Mated connector length 75 82 Square fl ange receptacle - UTS0 Fig. 6 11.3 Ø22.3 2.3 7.5 7.8 23.2 28.8 Ø3.2 Front view UTS7 UTS0 Panel cut out Drilling pattern 23.2 23.2 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 4 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 2.3 3.7 0.6 2.5 22° Front mounting Ø21.5 Rear mounting Ø25.1 Square fl ange receptacle - UTS0 Mechanics 5 contacts 16A/150V per IEC 61984 74 © 2011 – SOURIAU UTS Series 14E5/14D5 UTS 14E5/14D5 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS614DCG Part number UTS14DCGE Metal terminal Part number UTS14DCG Part number UTS14DCGR Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket UL 12A 650V UL94 HB CSA 12A 650V UL94 HB IEC 16A 150V 2.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 1.31mm² 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 16 18 Current (A) Ambient Operating Temperature (°C) Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG G for Green Y for Yellow R for Red © 2011 – SOURIAU 75 UTS Series 14E5/14D5 Mechanics 76 © 2011 – SOURIAU UTS Series 103W3 (3x#16 + 3x#20) Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 79 Free hanging receptacle Cable gland (Fig.1) UTS1JC103W3P UTS1JC103W3S Plug Without (Fig.2) UTS6103W3P UTS6103W3S Plug Cable gland (Fig.3) UTS6JC103W3P UTS6JC103W3S Jam nut receptacle Without (Fig.4) UTS7103W3P UTS7103W3S PCB contacts supply separately see page 79 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS7103W3P UTS7103W3S OR WITH OR Layout © 2011 – SOURIAU 77 UTS Series 103W3 (3x#16 + 3x#20) Dimensions Note: all dimensions are in mm Plug - UTS6 Fig. 2 Male Fig. 2 Female Fig. 3 33 63.2 Ø26.2 Ø26.2 Ø26.2 25.3 Jam nut receptacle - UTS7 Mated connector length - UTS7 Fig. 4 18.3 27.2 22.5 Ø15.1 3.5 2.4 77.3 Panel cut out Drilling pattern 3 2.5 2.5 0.7 0.8 Jam nut receptacle - UTS7 16.7 17.9 Free hanging - UTS1 70 Ø15.1 Fig. 1 Mechanics 6 contacts 5A/32V per IEC 61984 78 © 2011 – SOURIAU UTS Series 103W3 (3x#16 + 3x#20) Accessories and tooling Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Jam nut sealing caps Part number UTS10DCG Part number UTS10DCGR Plug sealing cap Square fl ange sealing cap Part number UTS610DCG Part number UTS10DCGE Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket Color coding rings Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RCM RM/RC 20W3K(1) S20RCM RM/RC 18W3K(1) S20RCM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 (1): example of plating, for other plating see UTS catalog page 143 (2): contact reeled (3): loose contac © 2011 – SOURIAU 79 UTS Series 103W3 (3x#16 + 3x#20) UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 5A 32V 1.5kV 3 Temperature elevation: 50°C Electrical characteristics UTS 103W3 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² 0.518mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) Contacts 120 (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - plating L SM20ML1 #20 Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) - 1.58 22-20 RM20W3K(1) RC20W3K(1) - 1.58 20-18 RM18W3K(1) RC18W3K(1) - 2.1 Stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 26-24 SM24W3S26(2) SC24W3S25(2) - 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 22-20 SM20W3S26(2) SC20W3S25(2) - 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - - Mechanics 6 contacts 5A/32V per IEC 61984 80 © 2011 – SOURIAU UTS Series 106 - 10E6/10D6 Specifi cations OR OR WITH OR Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 83 Free hanging receptacle Cable gland (Fig.1) UTS1JC106P UTS1JC106S Plug Without (Fig.2) UTS6106P UTS6106S Plug Cable gland (Fig.3) UTS6JC106P UTS6JC106S Jam nut receptacle Without (Fig.4) UTS7106P UTS7106S Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.9) UTS010E6P UTS010E6S Plug Without (Fig.2) UTS610E6P UTS610E6S Cable gland (Fig.3) UTS6JC10E6P UTS6JC10E6S Jam nut receptacle Without (Fig.5) UTS710E6P UTS710E6S PCB contacts supply separately see page 83 Jam nut receptacle Without (Fig.4) UTS7106P UTS7106S PCB contacts loaded Square fl ange receptacle Without (Fig.8) UTS010D6P UTS010D6S Jam nut receptacle with stand off and with hold down clips Without (Fig.6) UTS710D6P32 UTS710D6S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.7) UTS710D6P UTS710D6S Layout Sealed unmated © 2011 – SOURIAU 81 UTS Series 106 - 10E6/10D6 Dimensions Note: all dimensions are in mm 6 contacts 7A/32V per IEC 61984 Free hanging - UTS1 70 Ø15.1 Fig. 1 Plug - UTS6 Female Male Fig. 2 Fig. 3 33 63.2 Ø26.2 Ø26.2 25.3 Jam nut receptacle - UTS7 Front view 22.5 27.2 18.3 Ø15.1 3.5 3 12.3 Fig. 5 Fig. 6 Fig. 7 Fig. 4 4.2 18.3 Ø15.1 3.5 3 18.3 Ø15.1 3.5 3 Panel cut out Drilling pattern 18.5 18.5 Ø3.3 Jam nut receptacle - UTS7 16.7 17.9 2.8 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 3.3 1.6 Square fl ange receptacle - UTS0 Front mounting Ø15.2 Rear mounting Ø17.9 Square fl ange receptacle - UTS0 Fig. 9 Fig. 8 11.7 Ø15.1 2.3 16.2 20.8 24 Ø3.2 Front view Mated connector length 70.9 77.3 UTS7 UTS0 7.5 Mechanics 82 © 2011 – SOURIAU UTS Series 106 - 10E6/10D6 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RM RM/RC 20W3K(1) S20RM RM/RC 18W3K(1) S20RM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 Jam nut sealing caps Part number UTS10DCG Part number UTS10DCGR Plug sealing cap Square fl ange sealing cap Part number UTS610DCG Part number UTS10DCGE Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket Color coding rings Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES (1): example of plating, for other plating see UTS catalog page 143 (2): contact reeled (3): loose contact Accessories and tooling Metal terminal © 2011 – SOURIAU 83 UTS Series 106 - 10E6/10D6 Contacts #20 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) - 1.58 22-20 RM20W3K(1) RC20W3K(1) - 1.58 20-18 RM18W3K(1) RC18W3K(1) - 2.1 stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 IEC 7A 32V 1.5kV 3 Electrical characteristics UTS 106 - 10E6/10D6 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 Current (A) Ambient Operating Temperature (°C) UTS 106 UL 5A 250V UL94 V-0 CSA 4A 250V UL94 V-0 UTS 10E6/10D6 UL 6A 250V UL94 HB CSA 6A 250V UL94 HB Mechanics 6 contacts 7A/32V per IEC 61984 84 © 2011 – SOURIAU OR WITH OR Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS010E98P UTS010E98S Plug Without (Fig.1) UTS610E98P UTS610E98S Cable gland (Fig.2) UTS6JC10E98P UTS6JC10E98S Jam nut receptacle Without (Fig.3) UTS710E98P UTS710E98S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS010D98P UTS010D98S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS710D98P32 UTS710D98S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS710D98P UTS710D98S Layout UTS Series 10E98/10D98 Sealed unmated © 2011 – SOURIAU 85 Dimensions Note: all dimensions are in mm UTS Series 10E98/10D98 Plug - UTS6 Fig. 1 Fig. 2 70 Ø26.2 Ø26.2 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 18.3 Ø15.1 2.3 16.2 20.8 24 Ø3.2 Front view 70.9 77.3 UTS7 UTS0 Drilling pattern 3.3 1.6 Ø13.5 Ø22 Ø17.7 Ø4 2.8 3.3 Panel cut out 18.5 18.5 Ø3.3 Jam nut receptacle - UTS7 16.7 17.9 Square fl ange receptacle - UTS0 Front mounting Ø15.2 Rear mounting Ø17.9 Jam nut receptacle - UTS7 Front view 22.4 27.2 18.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18.3 Ø15.1 3.5 3 18.3 Ø15.1 3.5 3 Ø15.1 7.5 30° Ø3.1 68° 22° Mechanics 6 contacts 7A/50V per IEC 61984 86 © 2011 – SOURIAU UTS Series 10E98/10D98 UTS 10E98/10D98 derating curves Jam nut sealing caps Plug protective cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS610DCG Part number UTS10DCGE Metal terminal Part number UTS10DCG Part number UTS10DCGR Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket UL 6A 250V UL94 HB CSA 6A 250V UL94 HB IEC 7A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 Current (A) Ambient Operating Temperature (°C) © 2011 – SOURIAU 87 UTS Series 10E98/10D98 Mechanics 88 © 2011 – SOURIAU OR OR WITH OR OR OR UTS Series 147 - 14E7/14D7 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 91 Square fl ange receptacle Without (Fig.2) UTS0147P Free hanging receptacle Cable gland and grommet (Fig.3) UTS1GJC147P Free hanging receptacle Nut and grommet (Fig.4) UTS1GN147P Free hanging receptacle Cable gland (Fig.3) UTS1JC147P UTS1JC147S Plug Without (Fig.5) UTS6147P UTS6147S Plug Cable gland and grommet (Fig.6) UTS6GJC147S Plug Nut and grommet (Fig.7) UTS6GN147S Plug Cable gland (Fig.6) UTS6JC147P UTS6JC147S Jam nut receptacle Without (Fig.8) UTS7147P UTS7147S Jam nut receptacle Cable gland and grommet (Fig.10) UTS7GJC147P Jam nut receptacle Nut and grommet (Fig.9) UTS7GN147P Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.2) UTS014E7P UTS014E7S Plug Cable gland (Fig.6) UTS6JC14E7P UTS6JC14E7S Jam nut receptacle Without (Fig.11) UTS714E7P UTS714E7S PCB contacts loaded Square fl ange receptacle Without (Fig.1) UTS014D7P UTS014D7S Jam nut receptacle with stand off and hold down clips Without (Fig.11) UTS714D7P32 UTS714D7S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.11) UTS714D7P UTS714D7S Jam nut receptacle With stand off and hold down clip (Fig.11) UTS7147PSEK9 Screw contacts loaded Jam nut receptacle Without (Fig.8) UTS7147PSCR UTS7147SSCR Free hanging receptacle Cable gland (Fig.3) UTS1JC147PSCR Plug Cable gland (Fig.6) UTS6JC147PSCR UTS6JC147SSCR Layout Sealed unmated © 2011 – SOURIAU 89 UTS Series 147 - 14E7/14D7 Dimensions Note: all dimensions are in mm Plug - UTS6 Female Male Fig. 5 Fig. 6 Fig. 7 33 70 32 23.5 Ø35.1 Ø35.1 Ø35.1 Jam nut receptacle - UTS7 Fig. 11 Fig. 10 Fig. 8 Fig. 9 18 18 49 70.7 Ø31.8 Ø22.3 3.5 3.5 1.6 4.2 3 Mated connector length 75 82 UTS7 UTS0 Drilling pattern 6.4 3.2 Ø13.5 Ø22 Ø17.7 Ø4 Ø3.1 5.2 Panel cut out 23.2 23.2 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 Square fl ange receptacle - UTS0 Front mounting Ø21.5 Rear mounting Ø25.1 Square fl ange receptacle - UTS0 Free hanging - UTS1 11.3 Ø22.3 23.2 28.8 2.3 29.1 22 Ø3.2 Fig. 2 Front view Fig. 1 78.5 43 Ø22.3 Fig. 4 Fig. 3 Mechanics 6 + ground 16A/300V per IEC 61984 90 © 2011 – SOURIAU UTS Series 147 - 14E7/14D7 Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS14DCG Part number UTS14DCGR Plug sealing cap Square fl ange sealing cap Part number UTS614DCG Part number UTS14DCGE Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket Color coding rings Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 91 Contacts #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 UTS Series 147 - 14E7/14D7 UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 16A 300V 4kV 3 Temperature elevation: 50°C Electrical characteristics UTS 147 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 5 3 8 10 20 18 15 13 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 6 + ground 16A/300V per IEC 61984 Mechanics 92 © 2011 – SOURIAU OR WITH OR UTS Series 10E7/10D7 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS010E7P UTS010E7S Plug Without (Fig.1) UTS610E7P UTS610E7S Cable gland (Fig.2) UTS6JC10E7P UTS6JC10E7S Jam nut receptacle Without (Fig.3) UTS710E7P UTS710E7S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS010D7P UTS010D7S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS710D7P32 UTS710D7S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS710D7P UTS710D7S Layout Sealed unmated © 2011 – SOURIAU 93 UTS Series 10E7/10D7 Dimensions Note: all dimensions are in mm Plug - UTS6 Fig. 1 Fig. 2 70 Ø26.2 Ø26.2 25.3 Jam nut receptacle - UTS7 Front view 22.4 27.2 18.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18.3 Ø15.1 3.5 3 18.3 Ø15.1 3.5 3 Ø15.1 Square fl ange receptacle - UTS0 Fig. 6 Fig. 7 11.7 Ø15.1 2.3 16.2 7.5 20.8 24 Ø3.2 Front view Mated connector length 70.9 77.3 UTS7 UTS0 Drilling pattern 2.8 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 3.3 1.6 Panel cut out 18.5 18.5 Ø3.3 Jam nut receptacle - UTS7 16.7 17.9 Square fl ange receptacle - UTS0 Front mounting Ø15.2 Rear mounting Ø17.9 Mechanics 7 contacts 7A/50V per IEC 61984 94 © 2011 – SOURIAU UTS Series 10E7/10D7 UTS 10E7/10D7 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS610DCG Part number UTS10DCGE Metal terminal Part number UTS10DCG Part number UTS10DCGR Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket UL 6A 250V UL94 HB CSA 6A 250V UL94 HB IEC 7A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 0 6 10 Current (A) Ambient Operating Temperature (°C) 12 14 2 4 8 © 2011 – SOURIAU 95 UTS Series 10E7/10D7 Mechanics 96 © 2011 – SOURIAU OR OR OR OR WITH OR UTS Series 128 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 99 Square fl ange receptacle Without (Fig.1) UTS0128P UTS0128S Free hanging receptacle Cable gland and grommet (Fig.2) UTS1GJC128P Free hanging receptacle Nut and grommet (Fig.3) UTS1GN128P Free hanging receptacle Cable gland (Fig.2) UTS1JC128P UTS1JC128S Plug Without (Fig.4) UTS6128P UTS6128S Plug Cable gland and grommet (Fig.5) UTS6GJC128S Plug Nut and grommet (Fig.6) UTS6GN128S Plug Cable gland (Fig.5) UTS6JC128P UTS6JC128S Jam nut receptacle Without (Fig.8) UTS7128P UTS7128S Jam nut receptacle Cable gland and grommet (Fig.10) UTS7GJC128P Jam nut receptacle Nut and grommet (Fig.9) UTS7GN128P PCB contacts loaded Jam nut receptacle With stand off and hold down clip (Fig.11) UTS7128PSEK9 Layout © 2011 – SOURIAU 97 UTS Series 128 Dimensions Note: all dimensions are in mm Square fl ange receptacle - UTS0 Free hanging - UTS1 11.7 Ø19.1 20.8 26.4 2.3 10.5 18.1 Ø3.2 Fig. 1 Front view 74.5 40.9 Ø19.1 Fig. 3 Fig. 2 Plug - UTS6 Female Male Fig. 4 Fig. 5 Fig. 6 33 65.7 33 25.3 Ø30.1 Ø30.1 Ø30.1 Drilling pattern 4.4 3.4 2 4.5 4 2.8 0.9 Panel cut out 20.8 20.8 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 Square fl ange receptacle - UTS0 Front mounting Ø18.3 Rear mounting Ø22.3 Mated connector length 75.3 81.7 UTS7 UTS0 Jam nut receptacle - UTS7 Fig. 11 Fig. 10 Fig. 8 Fig. 9 18 18 49.1 74.5 Ø19.1 Ø19.1 3.5 3.5 1.6 4.2 3 Mechanics 8 contacts 10A/80V per IEC 61984 98 © 2011 – SOURIAU UTS Series 128 Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS12DCG Part number UTS12DCGR Plug sealing cap Square fl ange sealing cap Part number UTS612DCG Part number UTS12DCGE Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket Color coding rings Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 99 UTS Series 128 Contacts UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 10A 80V 1.5kV 3 Electrical characteristics UTS 128 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 120 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 8 contacts 10A/80V per IEC 61984 100 © 2011 – SOURIAU OR WITH OR UTS Series 12E8/12D8 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS012E8P UTS012E8S Plug Without (Fig.1) UTS612E8P UTS612E8S Cable gland (Fig.2) UTS6JC12E8P UTS6JC12E8S Jam nut receptacle Without (Fig.3) UTS712E8P UTS712E8S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS012D8P UTS012D8S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS712D8P32 UTS712D8S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS712D8P UTS712D8S Layout Sealed unmated © 2011 – SOURIAU 101 UTS Series 12E8/12D8 Dimensions Note: all dimensions are in mm Plug - UTS6 Jam nut receptacle - UTS7 Front view 27.2 31.9 18 Ø19 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø19 3.5 3 18 Ø19 3.5 3.1 Fig. 1 Fig. 2 66.7 Ø30.1 Ø30.1 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.7 Ø19 2.4 7.5 7.8 20.8 26.4 Ø3.2 Front view 75.3 81.7 UTS7 UTS0 Panel cut out Drilling pattern 20.8 20.8 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 Square fl ange receptacle - UTS0 Front mounting Ø18.3 Rear mounting Ø22.3 4.3 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 3 1.6 3 4.3 1.1 3.9 22° Mechanics 8 contacts 6A/32V per IEC 61984 102 © 2011 – SOURIAU UTS Series 12E8/12D8 UTS 12E8/12D8 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS612DCG Part number UTS12DCGE Metal terminal Part number UTS12DCG Part number UTS12DCGR Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket UL 4.5A 250V UL94 HB CSA 4.5A 250V UL94 HB IEC 6A 32V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 Current (A) Ambient Operating Temperature (°C) © 2011 – SOURIAU 103 UTS Series 12E8/12D8 Mechanics 104 © 2011 – SOURIAU OR OR WITH OR UTS Series 1210 - 12E10/12D10 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page107 Free hanging receptacle Cable gland (Fig.1) UTS1JC1210P UTS1JC1210S Plug Without (Fig.2) UTS61210P UTS61210S Plug Cable gland (Fig.3) UTS6JC1210P UTS6JC1210S Jam nut receptacle Without (Fig.4) UTS71210P UTS71210S Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS012E10P UTS012E10S Plug Without (Fig.2) UTS612E10P UTS612E10S Cable gland (Fig.3) UTS6JC12E10P UTS6JC12E10S Jam nut receptacle Without (Fig.5) UTS712E10P UTS712E10S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS012D10P UTS012D10S Jam nut receptacle with stand off and with hold down clips Without (Fig.6) UTS712D10P32 UTS712D10S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.7) UTS712D10P UTS712D10S Layout Sealed unmated © 2011 – SOURIAU 105 UTS Series 1210 - 12E10/12D10 Dimensions Note: all dimensions are in mm Free hanging - UTS1 Plug - UTS6 74 Ø19.1 Fig. 1 Female Male Fig. 2 Fig. 3 33 66.7 Ø30.1 Ø30.1 25.3 Jam nut receptacle - UTS7 Front view 27.2 31.9 18 Ø19.1 3.5 3 12.3 Fig. 5 Fig. 6 Fig. 7 Fig. 4 4.2 18 Ø19.1 3.5 3 18 Ø19.1 3.5 3.1 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.7 Ø19.1 2.3 7.5 7.8 20.8 26.4 Ø3.2 Front view 75.3 81.7 UTS7 UTS0 Panel cut out Drilling pattern 20.8 20.8 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 3.3 1.6 Ø22 Ø30.5 Ø26.2 22° 30° 68° 10 Ø3.1 4.9 3 Square fl ange receptacle - UTS0 Front mounting Ø18.3 Rear mounting Ø22.3 Mechanics 10 contacts 6A/50V per IEC 61984 106 © 2011 – SOURIAU UTS Series 1210 - 12E10/12D10 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RM RM/RC 20W3K(1) S20RM RM/RC 18W3K(1) S20RM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 Jam nut sealing caps Part number UTS12DCG Part number UTS12DCGR Plug sealing cap Square fl ange sealing cap Part number UTS612DCG Part number UTS12DCGE Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket Color coding rings Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES (1): example of plating, for other plating see UTS catalog page 143 (2): contact reeled (3): loose contact Accessories and tooling Metal terminal © 2011 – SOURIAU 107 UTS Series 1210 - 12E10/12D10 Contacts IEC 6A 50V 1.5kV 3 Electrical characteristics UTS 1210 - 12E10/12D10 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² Current use Limited use Not recommended use UTS 1210 UL 5A 250V UL94 V-0 CSA 4A 250V UL94 V-0 UTS 12E10/12D10 UL 4.5A 250V UL94 HB CSA 4.5A 250V UL94 HB 0 20 40 60 80 100 0 2 4 6 8 10 12 Current (A) Ambient Operating Temperature (°C) 120 #20 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) - 1.58 22-20 RM20W3K(1) RC20W3K(1) - 1.58 20-18 RM18W3K(1) RC18W3K(1) - 2.1 stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 10 contacts 6A/50V per IEC 61984 108 © 2011 – SOURIAU OR OR OR OR WITH OR Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 111 Square fl ange receptacle Without (Fig.1) UTS01412P UTS01412S Free hanging receptacle Cable gland and grommet (Fig.2) UTS1GJC1412P Free hanging receptacle Nut and grommet (Fig.3) UTS1GN1412P Free hanging receptacle Cable gland (Fig.2) UTS1JC1412P UTS1JC1412S Plug Without (Fig.4) UTS61412P UTS61412S Plug Cable gland and grommet (Fig.5) UTS6GJC1412S Plug Nut and grommet (Fig.6) UTS6GN1412S Plug Cable gland (Fig.5) UTS6JC1412P UTS6JC1412S Jam nut receptacle Without (Fig.7) UTS71412P UTS71412S Jam nut receptacle Cable gland and grommet (Fig.9) UTS7GJC1412P Jam nut receptacle Nut and grommet (Fig.8) UTS7GN1412P PCB contacts supply separately see page 111 Square fl ange receptacle Without (Fig.1) UTS01412P UTS01412S Jam nut receptacle Without (Fig.7) UTS71412P UTS71412S Layout UTS Series 1412 © 2011 – SOURIAU 109 Dimensions Note: all dimensions are in mm UTS Series 1412 Plug - UTS6 Female Male Fig. 4 Fig. 5 Fig. 6 33 70 32 25.3 Ø31.5 Ø31.5 Ø31.5 Jam nut receptacle - UTS7 Mated connector length Fig. 7 Fig. 9 Fig. 8 18 18 49 70.7 Ø22.3 Ø22.3 3.5 3.5 1.6 75 82 UTS7 UTS0 Panel cut out Drilling pattern 23.2 23.2 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 2.2 0.7 3.8 5.8 5.1 2 1.4 1 2.2 4.5 5.9 1 0.3 2.9 5.5 Square fl ange receptacle - UTS0 Front mounting Ø21.5 Rear mounting Ø25.1 Square fl ange receptacle - UTS0 Free hanging - UTS1 78.5 43 Ø22.3 Fig. 3 11.3 Fig. 2 Ø22.3 23.2 28.8 2.3 10.5 21.9 Ø3.2 Fig. 1 Front view Female Male Mechanics 12 contacts 10A/63V per IEC 61984 110 © 2011 – SOURIAU UTS Series 1412 Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS14DCG Part number UTS14DCGR Plug sealing cap Square fl ange sealing cap Part number UTS614DCG Part number UTS14DCGE Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket Color coding rings Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 111 UTS Series 1412 Contacts UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 10A 63V 1.5kV 3 Electrical characteristics UTS 1412 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 120 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 12 contacts 10A/63V per IEC 61984 112 © 2011 – SOURIAU OR OR WITH OR UTS Series 14E12/14D12 (4x#16 + 8x#20) Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS014E12P UTS014E12S Plug Without (Fig.1) UTS614E12P UTS614E12S Cable gland (Fig.2) UTS6JC14E12P UTS6JC14E12S Jam nut receptacle Without (Fig.3) UTS714E12P UTS714E12S PCB contacts loaded Square fl ange receptacle Without (Fig.6) UTS014D12P UTS014D12S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS714D12P32 UTS714D12S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS714D12P UTS714D12S Layout Sealed unmated © 2011 – SOURIAU 113 UTS Series 14E12/14D12 (4x#16 + 8x#20) Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 30.4 35.1 18 Ø22.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø22.3 3.5 3 18 Ø22.3 3.5 3 Plug - UTS6 Fig. 1 Fig. 2 70 Ø35.1 Ø35.1 25.3 Square fl ange receptacle - UTS0 Mated connector length 11.3 Ø22.3 2.3 7.5 7.8 23.2 28.8 Ø3.2 Fig. 6 Front view 75 82 UTS7 UTS0 23.2 Panel cut out 23.2 23.2 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 Square fl ange receptacle - UTS0 Front mounting Ø21.5 Rear mounting Ø25.1 Drilling pattern 4.5 4.1 Ø22 Ø30.5 Ø26.2 Ø30.5 30° 68° 10 Ø3.1 1.6 4.5 2.3 6.7 22° 1 Mechanics 12 contacts 4A/50V per IEC 61984 114 © 2011 – SOURIAU UTS Series 14E12/14D12 (4x#16 + 8x#20) UTS 14E12/14D12 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS614DCG Part number UTS14DCGE Metal terminal Part number UTS14DCG Part number UTS14DCGR Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket UL 4.5A 250V UL94 HB CSA 4.5A 250V UL94 HB IEC 4A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 Current (A) Ambient Operating Temperature (°C) © 2011 – SOURIAU 115 UTS Series 14E12/14D12 (4x#16 + 8x#20) Mechanics 116 © 2011 – SOURIAU OR WITH OR UTS Series 12E14/12D14 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS012E14P UTS012E14S Plug Without (Fig.1) UTS612E14P UTS612E14S Cable gland (Fig.2) UTS6JC12E14P UTS6JC12E14S Jam nut receptacle Without (Fig.3) UTS712E14P UTS712E14S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS012D14P UTS012D14S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS712D14P32 UTS712D14S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS712D14P UTS712D14S Layout Sealed unmated © 2011 – SOURIAU 117 UTS Series 12E14/12D14 Dimensions Note: all dimensions are in mm 14 contacts 5A/32V per IEC 61984 Jam nut receptacle - UTS7 Front view 27.2 31.9 18 Ø19 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø19 3.5 3 18 Ø19 3.5 3.1 Plug - UTS6 Fig. 1 Fig. 2 66.7 Ø30.1 Ø30.1 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.7 Ø19 2.4 7.5 7.8 20.8 26.4 Ø3.2 Front view 75.3 81.7 UTS7 UTS0 Panel cut out Drilling pattern 20.8 20.8 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 4.4 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 2.7 2 4.7 3.8 1.8 1.4 Square fl ange receptacle - UTS0 22° Front mounting Ø18.3 Rear mounting Ø22.3 Mechanics 118 © 2011 – SOURIAU UTS Series 12E14/12D14 UTS 12E14/12D14 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS612DCG Part number UTS12DCGE Metal terminal Part number UTS12DCG Part number UTS12DCGR Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket UL 4.5A 250V UL94 HB CSA 4.5A 250V UL94 HB IEC 5A 32V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 0 4 2 6 8 10 Current (A) Ambient Operating Temperature (°C) © 2011 – SOURIAU 119 UTS Series 12E14/12D14 Mechanics 120 © 2011 – SOURIAU OR WITH OR UTS Series 14E15/14D15 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS014E15P UTS014E15S Plug Without (Fig.1) UTS614E15P UTS614E15S Cable gland (Fig.2) UTS6JC14E15P UTS6JC14E15S Jam nut receptacle Without (Fig.3) UTS714E15P UTS714E15S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS014D15P UTS014D15S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS714D15P32 UTS714D15S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS714D15P UTS714D15S Layout Sealed unmated © 2011 – SOURIAU 121 UTS Series 14E15/14D15 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 30.4 35.1 18 Ø22.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø22.3 3.5 3 18 Ø22.3 3.5 3 Plug - UTS6 Fig. 1 Fig. 2 70 Ø35.1 Ø35.1 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.3 Ø22.3 2.3 7.5 23.2 28.8 Ø3.2 Front view 7.8 75 82 UTS7 UTS0 Panel cut out Drilling pattern 23.2 23.2 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 30° 68° 22° 3.2 5.5 2.5 2.7 6.1 5.1 5.3 6.2 2.8 0.3 5.7 1.9 1 3.5 Square fl ange receptacle - UTS0 Front mounting Ø21.5 Rear mounting Ø25.1 Mechanics 15 contacts 4A/50V per IEC 61984 122 © 2011 – SOURIAU UTS Series 14E15/14D15 UTS 14E15/14D15 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS614DCG Part number UTS14DCGE Metal terminal Part number UTS14DCG Part number UTS14DCGR Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket UL 12A 650V UL94 HB CSA 12A 650V UL94 HB IEC 4A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 1.31mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 Current (A) Ambient Operating Temperature (°C) 0 5 3 8 10 20 18 15 13 23 25 28 30 © 2011 – SOURIAU 123 UTS Series 14E15/14D15 Mechanics 124 © 2011 – SOURIAU OR WITH OR UTS Series 14E18/14D18 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS014E18P UTS014E18S Plug Without (Fig.1) UTS614E18P UTS614E18S Cable gland (Fig.2) UTS6JC14E18P UTS6JC14E18S Jam nut receptacle Without (Fig.3) UTS714E18P UTS714E18S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS014D18P UTS014D18S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS714D18P32 UTS714D18S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS714D18P UTS714D18S Layout Sealed unmated © 2011 – SOURIAU 125 UTS Series 14E18/14D18 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 30.4 35.1 18 Ø22.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø22.3 3.5 3 18 Ø22.3 3.5 3 Plug - UTS6 Fig. 1 Fig. 2 70 Ø35.1 Ø35.1 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.3 Ø22.3 2.3 7.5 23.2 28.8 Ø3.2 Front view 7.8 75 82 UTS7 UTS0 Panel cut out Drilling pattern Jam nut receptacle - UTS7 24.5 25.9 23.2 23.2 Ø3.3 1.6 3.3 6.1 Ø22 Ø26.2 Ø30.5 22° 30° 68° 10 Ø3.1 4.9 2.8 5.7 6.4 Square fl ange receptacle - UTS0 Front mounting Ø21.5 Rear mounting Ø25.1 Mechanics 18 contacts 5A/50V per IEC 61984 126 © 2011 – SOURIAU UTS Series 14E18/14D18 UTS 14E18/14D18 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS614DCG Part number UTS14DCGE Metal terminal Part number UTS14DCG Part number UTS14DCGR Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket UL 4A 250V UL94 HB CSA 4A 250V UL94 HB IEC 5A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 Current (A) Ambient Operating Temperature (°C) 0 6 4 2 8 10 © 2011 – SOURIAU 127 UTS Series 14E18/14D18 Mechanics 128 © 2011 – SOURIAU OR OR WITH OR UTS Series 1419 - 14E19/14D19 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 131 Free hanging receptacle Cable gland (Fig.1) UTS1JC1419P UTS1JC1419S Plug Without (Fig.2) UTS61419P UTS61419S Plug Cable gland (Fig.3) UTS6JC1419P UTS6JC1419S Jam nut receptacle Without (Fig.4) UTS71419P UTS71419S PCB contacts supply separately see page 131 Jam nut receptacle Without (Fig.4) UTS71419P UTS71419S Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.8) UTS014E19P UTS014E19S Plug Without (Fig.2) UTS614E19P UTS614E19S Cable gland (Fig.3) UTS6JC14E19P UTS6JC14E19S Jam nut receptacle Without (Fig.5) UTS714E19P UTS714E19S PCB contacts loaded Square fl ange receptacle Without (Fig.9) UTS014D19P UTS014D19S Jam nut receptacle with stand off and with hold down clips Without (Fig.6) UTS714D19P32 UTS714D19S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.7) UTS714D19P UTS714D19S Layout Sealed unmated Square fl ange receptacle © 2011 – SOURIAU 129 UTS Series 1419 - 14E19/14D19 Dimensions Note: all dimensions are in mm Square fl ange receptacle - UTS0 Mated connector length Fig. 8 Fig. 9 11.3 Ø22.3 2.3 7.5 78 23.2 28.8 Ø3.2 Front view 75 82 UTS7 UTS0 Free hanging - UTS1 Plug - UTS6 78.5 Ø22.3 Fig. 1 Female Male Fig. 2 Fig. 3 33 70 Ø35.1 Ø35.1 25.3 Jam nut receptacle - UTS7 Front view 30.4 35.1 18 3.5 3 12.3 Fig. 5 Fig. 6 Fig. 7 Fig. 4 4.2 18 Ø22.3 3.5 3 18 Ø22.3 Ø22.3 3.5 3 Panel cut out Drilling pattern Jam nut receptacle - UTS7 24.5 25.9 23.2 23.2 Ø3.3 1.6 4.9 Ø22 Ø26.2 Ø30.5 30° 68° 10 Ø3.1 3.3 6.6 2.8 5.7 Square fl ange receptacle - UTS0 22° Front mounting Ø21.5 Rear mounting Ø25.1 Mechanics 19 contacts 5A/32V per IEC 61984 130 © 2011 – SOURIAU UTS Series 1419 - 14E19/14D19 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RM RM/RC 20W3K(1) S20RM RM/RC 18W3K(1) S20RM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 Jam nut sealing caps Part number UTS14DCG Part number UTS14DCGR Plug sealing cap Square fl ange sealing cap Part number UTS614DCG Part number UTS14DCGE Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket Color coding rings Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES (1): example of plating, for other plating see UTS catalog page 143 (2): contact reeled (3): loose contact Accessories and tooling Metal terminal © 2011 – SOURIAU 131 UTS Series 1419 - 14E19/14D19 Contacts IEC 5A 32V 1.5kV 3 Electrical characteristics UTS 1419 - 14E19/14D19 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² Current use Limited use Not recommended use UTS 1419 UL 5A 250V UL94 V-0 CSA 4A 250V UL94 V-0 UTS 14E19/14D19 UL 4A 250V UL94 HB CSA 4A 250V UL94 HB 0 20 40 60 80 100 0 2 4 6 8 10 12 Current (A) Ambient Operating Temperature (°C) 120 #20 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) - 1.58 22-20 RM20W3K(1) RC20W3K(1) - 1.58 20-18 RM18W3K(1) RC18W3K(1) - 2.1 stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 19 contacts 5A/32V per IEC 61984 132 © 2011 – SOURIAU OR OR OR WITH UTS Series 1823 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 135 Square fl ange receptacle Without (Fig.1) UTS01823P UTS01823S Free hanging receptacle Cable gland (Fig.2) UTS1JC1823P UTS1JC1823S Plug Without (Fig.3) UTS61823P UTS61823S Plug Cable gland (Fig.4) UTS6JC1823P UTS6JC1823S Jam nut receptacle Without (Fig.5) UTS71823P UTS71823S PCB contacts supply separately see page 135 Square fl ange receptacle Without (Fig.1) UTS01823P UTS01823S Jam nut receptacle Without (Fig.5) UTS71823P UTS71823S Layout 134 © 2011 – SOURIAU UTS Series 1823 Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS18DCG Part number UTS18DCGR Plug sealing cap Square fl ange sealing cap Part number UTS618DCG Part number UTS18DCGE Part numbers Receptacle cap Plug cap 8500-5590A 8500-5599 Plastic protective cap Part numbers / neoprene UTFD16B Gasket Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 135 UTS Series 1823 Contacts 120 UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 9A 63V 1.5kV 3 Electrical characteristics UTS 1823 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 120 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 23 contacts 9A/63V per IEC 61984 136 © 2011 – SOURIAU OR WITH OR UTS Series 1832 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contact supply separately see page 139 Free hanging receptacle Cable gland (Fig.1) UTS1JC1832P UTS1JC1832S Plug Without (Fig.2) UTS61832P UTS61832S Plug Cable gland (Fig.3) UTS6JC1832P UTS6JC1832S Jam nut receptacle Without (Fig.4) UTS71832P UTS71832S PCB contacts supply separately see page 139 Jam nut receptacle Without (Fig.4) UTS71832P UTS71832S Layout 138 © 2011 – SOURIAU UTS Series 1832 Metal terminal Crimp tooling Contacts Contact size Part number of head RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RM RM/RC 20W3K(1) S20RM RM/RC 18W3K(1) S20RM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 Jam nut sealing caps Part number UTS18DCG Part number UTS18DCGR Plug sealing cap Square fl ange sealing cap Part number UTS618DCG Part number UTS18DCGE Part numbers Receptacle cap Plug cap 8500-5590A 8500-5599 Plastic protective cap Part numbers / neoprene UTFD16B Gasket Handle Tool kit Part number TOOLKIT Part number SHANDLES (1): example of plating, for other plating see UTS catalog page 143 (2): contact reeled (3): loose contact Accessories and tooling Metal terminal © 2011 – SOURIAU 139 UTS Series 1832 Contacts UL 5A 250V UL94 V-0 CSA 4A 250V UL94 V-0 IEC 4A 32V 1.5kV 3 Electrical characteristics UTS 1832 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 2 4 6 8 10 Current (A) Ambient Operating Temperature (°C) 120 #20 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) - 1.58 22-20 RM20W3K(1) RC20W3K(1) - 1.58 20-18 RM18W3K(1) RC18W3K(1) - 2.1 stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 32 contacts 4A/32V per IEC 61984 UTS Series © 2011 – SOURIAU 141 Contacts UTS Series Description ....................................................................................................................................... 142 Contact plating selector guide ................................................................................................... 143 Contact selector guide ................................................................................................................. 144 Packaging ......................................................................................................................................... 144 Crimp contacts ................................................................................................................................ 145 #16 coaxial contacts .................................................................................................................... 147 PCB contacts ................................................................................................................................... 148 Fibre optic contacts ....................................................................................................................... 149 142 © 2011 – SOURIAU UTS Series Contacts Contacts Description The UTS series is delivered with (solder and PCB versions) or without contact (crimp version). When contacts are not loaded, this series offers the unique possibility to use the same contact in any layout as long as it receives the same active part size. Thus it is possible to buy only one contact reference and equip all connectors even if housings are different. The main benefit is the standardisation which means reduction of inventory cost. Bearing in mind that any additional tool or complicated assembly process should be avoided, our contacts are based on a snap-in principle which avoid the use of an insertion tool. Crimp contacts are available in different versions: In addition, UTS series can obviously be equipped with solder contacts, PCB contacts, screw termination. • machined • stamped & formed • coaxial • fiber optic © 2011 – SOURIAU 143 UTS Series Contacts Contact plating selector guide As soon as you know what contact size you need, you next have to decide on which type to use. Souriau proposes mainly two different types of electrical contacts: - Machined - Stamped & formed Machined contacts are generally chosen for low quantities purpose as well as a better solution for power applications. Stamped & formed contacts offer the ability to be crimped automatically which makes them more suitable for high volume production applications. Then comes the question: What plating should I choose ? Hereunder is a graph with criteria to guide you: NB: do not mix different plating (e.g. tin plated pin contact with gold plated socket contact). 250 100 0.4μm of gold min Gold fl ash Silver Tin 5mA 5mV Contact size #20 #12 #16 #8 Vibration Number of cycles Current / Voltage Contacts 144 © 2011 – SOURIAU UTS Series Contacts Electrical characteristics: contact resistance #20 Ø1mm Machined < 6m Stamped & formed < 15m #16 Ø1.6mm Machined < 3m Stamped & formed < 6m #12 Ø2.4mm Machined < 5m #8 Ø3.6mm Machined < 5m Available platings (contact supply separately) A 2μ Ni + 2μ Ag J Gold fl ash over 2μ Ni K Min 0.4μ gold over 2μ Ni S31 Active part: Gold fl ash over Ni Crimp area: Nickel S18 Active part: 0.75μ gold min over 2μ Ni Crimp area: 1.3μ tin over Ni Other: Nickel S25 S26 Active part: 0.75μ Au over Ni Crimp area: fl ash Au over Ni T T: 2μm Ni mini all over + 3 to 5 μm Sn all over TK6 2-5μ Sn pre-plated Conscious of the wide variety of applications, contact packaging has been considered for small series (bulk packaging) and high volume production (reeled contacts): Size contacts #20 & #16 • 100 pieces bulk packing (stamped & formed contacts) Electrical characteristics: contact resistance #20 Ø1mm Machined < 4m #16 Ø1.6mm Machined < 3m Available platings (contact preloaded) Min 0.4μ gold over 2μ Ni Contact preloaded Contact supply separately • 50 pieces bulk packing (machined contacts) • 25 pieces bulk packing (stamped & formed contacts) • 1000 pieces bulk packing (machined contacts) • 5000 pieces reeled (machined contacts) • 3000 pieces reeled (stamped & formed contacts) Size contacts #12 & #8 Contact selector guide Packaging © 2011 – SOURIAU 145 UTS Series Contacts Crimp contacts (1) contact reeled (2) loose contact Exemple: RM24W3K - Size #20, Machined, AWG24 wire. Contact size Type Wire size Part number Max wire Ø Max insulator Ø Plating AWG mm² Male Female available #20 Ø1 mm Machined 26-24 0.13-0.20 RM24W3K RC24W3K 1.58 max K Stamped & Formed 26-24 0.13-0.25 SM24W3-(1) SC24W3-(1) 0.89-1.58 TK6 S25 (female) SM24WL3-(2) SC24WL3-(2) S26 (male) Machined 22-20 0.32-0.52 RM20W3K RC20W3K 1.58 max K Stamped & Formed 22-20 0.35-0.5 SM20W3-(1) SC20W3-(1) 1.17-2.08 TK6 S25 (female) SM20WL3-(2) SC20WL3-(2) S26 (male) Machined 20-18 0.50-0.93 RM18W3K RC18W3K 2.10 max K #16 Ø1.6 mm Machined 30-28 0.05-0.08 RM28M1- RC28M1- 0.55 1.1 K, J, T Machined 26-24 0.13-0.2 RM24M9- RC24M9- 0.8 1.6 K, J, T Stamped & Formed 26-24 0.13-0.25 SM24M1-(1) SM24ML1-(2) SC24M1-(1) SC24ML1-(2) 0.89-1.28 Insulation grip S31, S18, TK6 Machined 22-20 0.32-0.52 RM20M13- RC20M13- 1.18 1.8 K, J, T RM20M12- RC20M12- 2.2 Stamped & Formed 22-20 0.35-0.5 SM20M1-(1) SM20ML1-(2) SC20M1-(1) SC20ML1-(2) 1.17-2.08 Insulation grip S31, S18, TK6 Machined 20-16 0.52-1.5 RM16M23- RC16M23- 1.8 3.2 K, J, T Stamped & Formed 18-16 0.8-1.5 SM16M1-(1) SM16ML1-(2) SC16M1-(1) SC16ML1-(2) 3.0 No insulation grip S31, S18, TK6 Stamped & Formed 18-16 0.8-1.5 SM16M11-(1) SM16ML11-(2) SC16M11-(1) SC16ML11-(2) 2.0-3.0 Insulation grip S31, S18, TK6 Machined 16-14 1.5-2.5 RM14M50- RC14M50- 2.05 3.2 K, J, T Machined 16-14 1.5-2.5 RM14M30- RC14M30- 2.28 3.2 K, J, T Stamped & Formed 14 2.0-2.5 SM14M1-(1) SM14ML1-(2) SC14M1-(1) SC14ML1-(2) 3.2 No insulation grip S31, S18, TK6 #12 Ø2.4 mm Machined 22 0.13-0.4 82911457NA 82911456A - 4.9 A, K 20 0.5 82911459NA 82911458A 18 0.75-1.0 82911461NA 82911460A 16 1.5 82911463NA 82911462A 14 2.5 82911465NA 82911464A 12 4 82911467NA 82911466A #8 Ø3.6 mm Machined 16 1.5 82913601A 82913600A - 6.5 A 14 2.5 82913603A 82913602A 12 4 82913605A 82913604A 10 6.0 82913607A 82913606A 8 10.0 82913609A 82913608A Standard version Contacts 146 © 2011 – SOURIAU Contact 1 Contact 2 Standard male contact Standard female contact Longer male contact Standard male contact Standard female contact FMLB Shorter female contact LMFB UTS Series Contacts Crimp contacts Exemple: RM16M3GE1K - Size #16, Machined, Longer male, AWG16 wire. First Mate Last Break contacts should be chosen only if the cavity is not marked with the earth symbol. For cavities marked with the earth symbol, standard contacts will fulfi ll the same role as a fi rst mate, last break contact used in a standard cavity. Ground symbol How to make FMLB / LMFB connection First Mate Last Break contacts Contact size Type Wire size Part number Max wire Ø Max insulator Ø Color band Plating available AWG mm² Male Female Front Rear #16 Ø1.6 mm Longer male contact (+1mm) Machined 30-28 0.05-0.08 RM28M1GE1□ - 0.55 1.1 - Red □ = K, J or T 26-24 0.13-0.2 RM24M9GE1□ 0.8 1.6 Red Red 22-20 0.32-0.52 RM20M13GE1□ 1.18 1.8 Black Red RM20M12GE1□ 2.2 Blue Red 20-16 0.52-1.5 RM16M23GE1□ 1.8 3.2 - Red 16-14 1.5-2.5 RM14M50GE1□ 2.05 - - Red 16-14 1.5-2.5 RM14M30GE1□ 2.28 - - Red #16 Ø1.6 mm Shorter female contact (-0.7mm) Machined 30-28 0.05-0.08 - RC28M1GE7□ 0.55 1.1 - Blue □ = K, J or T 26-24 0.13-0.2 RC24M9GE7□ 0.8 1.6 Red Blue 22-20 0.32-0.52 RC20M13GE7□ 1.18 1.8 Black Blue RC20M12GE7□ 2.2 Blue Blue 20-16 0.52-1.5 RC16M23GE7□ 1.8 3.2 - Blue 16-14 1.5-2.5 RC14M50GE7□ 2.05 - - Blue 16-14 1.5-2.5 RC14M30GE7□ 2.28 - - Blue ont Re © 2011 – SOURIAU 147 UTS Series Contacts #16 coaxial contacts We provide 2 types of coaxial contacts suitable for 50 or 75, coaxial cable or twisted pair cable. Monocrimp coaxial contact • The monocrimp one-piece coaxial contacts offer high reliability plus the economic advantage of a 95% reduction in installation time over conventional assembly methods. • This economy is achieved by simultaneously crimping both the inner conductor and outer braid or drain wire. Multipiece crimp coaxial contact • The inner conductor and outer braid is crimped individually. • The thermoplastic insulating bushing in the outer body is designed to accept and permanently retain the inner contact. • An outer ferrule is used to connect the braid to the outer contact and provide cable support to ensure against bending and vibration. Suitable for Coaxial cable or Twisted cable • For jacket diameter from 1.78 to 3.05mm Inner conductor up to 2.44mm diameter • For jacket diameter from 0.64 to 1.45mm Inner conductor from AWG30 to AWG24 Contacts for coaxial cable summary Contact type Contact range Contact part number with cable combination Cabling notice Male contact Female contact Multipiece RMDXK10D28 RCDXK1D28 See page 176 See pages 180 & 181 Monocrimp RMDX60xxD28 RCDX60xxD28 See page 182 Contacts for twisted pairs cable summary Contact type Contact range Contact part number with cable combination Cabling notice Male contact Female contact Multipiece RMDXK10D28 + YORK090 RCDXK1D28 + YORK090 See page 177 See page 178 Monocrimp RMDX60xxD28 RCDX60xxD28 See page 179 Coaxial contact range Contacts 148 © 2011 – SOURIAU PCB contacts PCB contacts PCB soldering UTS range can be carried out with a wave soldering process, but not refl ow soldering process. All high temperature processes are prohibited. Nominal length (G) Dimension of dipsolder contacts out of connector (contacts to be ordered separately). Contact size Type Part number Plating Male Female #20 Ø1mm Short version RMW50A7K RCW50A7K K Long version RMW5016K RCW5016K #16 Ø1.6mm Short version RM20M12E8□ RC20M12E8□ □=K or T Long version RM20M12E83□ RC20M12E83□ RC20M12E84□ Exemple: RM50A7K - Size #20, Short version, male. UTS Series Contacts G * Plating indication: see plating table Connector size Pin contact Socket contact RM20M12E8*□ RM20M12E83*□ RC20M12E8*□ RC20M12E83*□ RC20M12E84*□ 10 4 9.1 3.3 8.5 12.1 12 4 9.1 3.3 8.5 12.1 14 4 9.1 3.3 8.5 12.1 16 4 9.1 3.3 8.5 12.1 Connector size Pin contact Socket contact RM20M 12E8*□ RM20M 12E83*□ RMW 50A7K RMW 5016K RC20M 12E8*□ RC20M 12E83*□ RCW 50A7K RCW 5016K 10 4.1 9.2 9.51 10.41 4.65 8.5 2.4 3.04 12 4 9.2 9.51 10.41 3.3 8.5 2.4 3.04 14 4 9.2 9.51 10.41 3.3 8.5 2.4 3.04 16 4 9.2 9.51 10.41 3.3 8.5 2.4 3.04 UTS0 UTS7 © 2011 – SOURIAU 149 Fibre optic contacts Size 16 Fibre optic contacts for TRIM TRIO® connectors Size 16 Fibre optic contacts are optical contacts designed for the integration of optical links in all TRIM TRIO® cable connectors. The Fibre optic contacts are designed to accommodate: • Plastic Optical Fibre (POF) 1 mm core and 2.2 mm jacket • Plastic Clad Fibre (PCF) 230μm core and 2.2 mm jacket Typical features and benefits are: • Socket contact is spring loaded to avoid any air gap between the two optical faces. • Low insertion loss is provided by high precision pieces. • Single jumpers, multiway harness and active device housings can be supplied regarding customer requirement. Performance • Fibre type: ................................................................................................................................POF • Wave length: ........................................................................................................................650 nm • Optical insertion loss (typ.): ..........................................................................................2 dB max. • Jacketed external diameter: ............................................................................................2.2mm • Temperature range: ....................................................................................................-25°C to +70°C • Cable retention: ..................................................................................................................... 49N • Mating cycles without cleaning: .........................................................................................50 • Max. mating cycles: ...............................................................................................................500 Construction • Contact body: Copper alloy Connector accommodation Any TRIM TRIO® size 16 contact can be used in any contact position in any connector in the TRIM TRIO® size 16 interconnection system : UTP, UTS, UTG, UTO. UTS Series Contacts Description Technical characteristics Contacts 150 © 2011 – SOURIAU Fibre optic contacts UTS Series Contacts POF Contact (Plastic Optical Fibre) Ordering information Part numbers Descriptions 80WD0005 Stripping tool 80WD0025 Automatic stripping tool for Ø 0.5 mm, 0.6 mm, 0.7 mm & 3.8 mm 80WM0006 Ruler 80WP0005 Polishing plate 80WP0013 Non slip base (to hold the polishing plate) 80WP0014 Polishing disk (grain size 9μm) 80WP0018 Polishing tool 80WP0019 Polishing disk (grain size 30μm) 80WS0002 Crimping plier STANDARD TOOLING KIT - P/N 80MS0004 The standard tooling kit is made of the part numbers below that can be ordered separately as well. Part numbers Descriptions 80WG0010 Needle 80WG0015 Capsule 80WG0016 Syringe 80WN0005 Dry air spray 80WN0006 Optical paper 80WN0012 Dropping bottle 80WN0008 Wiping solvent SPECIFIC TOOLING LIST - can be ordered only separately POF Contacts (Plastic Optical Fibre) Male contact ................................................RMPOF1000 Female contact ......................................... RCPOF1000B © 2011 – SOURIAU 151 UTS Series Contacts Contacts UTS Series © 2011 – SOURIAU 153 Technical information UTS Series Tooling ............................................................................................................................................... 154 Assembly intruction ....................................................................................................................... 156 Dimensions overmoulded harnesses ...................................................................................... 162 Extraction tools ............................................................................................................................... 162 Rated current & working voltage ............................................................................................... 163 UV resistance .................................................................................................................................. 164 UL94 + UL1977 ............................................................................................................................. 165 IEC 61984 & IP codes explained ............................................................................................. 168 What is NEMA rating ? ................................................................................................................. 170 Ethernet for the layman ................................................................................................................ 171 154 © 2011 – SOURIAU UTS Series Technical information Souriau has been working in partnership with Mecal for a good number of years. With sales offi ces located in all major industrial regions of the world, the combined strengths of both organisations has resulted in a truly global solution to all your production tooling needs. Mecal sales network: Mecal is leader in manufacturing tooling for crimping terminals over a stripped wire. Established in 1976, Mecal has become one of the world's leading companies dedicated to the design and manufacture of semi automatic production tools for strip fed, open barrel crimp terminals, serving the Automotive, Telecom and Datacomm industry. The extreme environment interconnect specialist “from deep sea to deep space”. Souriau designs manufactures and markets high performance interconnect solutions for severe environments dedicated to the aerospace, defence, light and heavy industry markets. Mini Applicator Stripper Presses Tooling www.mecal.net/eng/retevendita.php Automatic crimping tools © 2011 – SOURIAU 155 UTS Series Technical information Contact size Part number Head Handles #20 1mm RM/RC 24W3 - S20RCM SHANDLES RM/RC 20W3 - RM/RC 18W3 - SM 24W3S-(1) SC 24W3S-(1) S20SCM20 SM 24WL3S-(2) SC 24WL3S-(2) SM/SC 20W3S-(1) SM/SC 20WL3S-(2) #16 1.6mm RM/RC 28M1- S16RCM20 RM/RC 24M9- RM/RC 20M13- RM/RC 20M12- RM/RC 16M23- S16RCM16 RM/RC 14M50- S16RCM1450 RM/RC 14M30- S16RCM14 SM/SC 24M1- SM/SC 24ML1- S16SCM20 SM/SC 20M1- SM/SC 20ML1- SM/SC 16M1- SM/SC 16ML1- S16SCML1 SM/SC 14M1- SM/SC 14ML1- SM/SC 16M11- SM/SC 16ML11- S16SCML11 Specifi c contacts Contact size Part number Tool with separate locator Extraction tools Hand tool Positioner + locator setting #12 2.4mm 8291 1457N- / 8291 1456- M317 VGE10077A 1-2 5106020924 8291 1459N- / 8291 1458- 2 8291 1461N- / 8291 1460- 2 8291 1463N- / 8291 1462- 3 8291 1465N- / 8291 1464- 3 8291 1467N- / 8291 1466- 4 #8 3.6mm 8291 3601A / 8291 3600A M317 VGE10078A 3 51060210936 8291 3603A / 8291 3602A 3 8291 3605A / 8291 3604A 4 8291 3607A / 8291 3606A 5 8291 3609A / 8291 3608A 6/7 Contact size Part number Hand tools (SHANDLES) head Tool with separate locator Extraction tools Hand tool Positioner + locator setting #16 Ø 1.6mm Longer RM contact RM28M1GE1- S16RCM20 RX2025GE1 RM24M9GE1- RM20M13GE1- RM16M23 GE1- S16RCM16 MH860 MH86186 6/8 RM14M50 GE1- S16RCM1450 M317 UH25 3 RM14M30 GE1- S16RCM14 #16 Ø 1.6mm Shorter RC contact RC28M1GE7- S16RCM20 MH860 MH86164G 4/6 RC24M9GE7- 5/6 RC20M13GE7- RC20M12GE7- 5/7 RC16M23GE7- S16RCM16 6/8 RC14M50GE7- S16RCM1450 M317 UH25 3 RC14M30GE7- S16RCM14 Standard contacts Coaxial contacts See cabling notice chapter Appendices, pages 178 to 182. (1) contact reeled (2) loose contact Note: endurance of SHANDLES tool = 5 000 cycles. 51060210924 51060210936 SHANDLES Crimptooling table Technical information 156 © 2011 – SOURIAU Assembly instruction Part number Stripping length L Male Female (mm) Machined contact #16 RM28M1- / RM24M9- RM20M13- / RM20M12- RC28M1- / RC24M9- RC20M13- / RC20M12- 4.8 RM16M23- / RM14M50- RM14M30- RC16M23- / RC14M50- RC14M30- 7.1 #20 RM24W3- / RM20W3- RM18W3- RC24W3- / RC20W3- RC18W3- 4.8 Stamped & formed #16 SM24M1- / SM24ML1- SM20M1- / SM20ML1 SC24M1- / SC24ML1- SC20M1- / SC20ML1- 4 SM16M11- / SM16ML11- SC16M11- / SC16ML11- 4.65 SM16M1- / SM16ML1- SC16M1- / SC16ML1- 6.35 SM14M1- / SM14ML1- SC16M11- / SC16ML11- 6.35 Screw contacts Power contacts #12 8291 1457- / 8291 1459- / 8291 1461- / 8291 1463- / 8291 1465- / 8291 1467- 8291 1456- / 8291 1458- / 8291 1460- /8291 1462- / 8291 1464- / 8291 1466 - 7 to 8 Power contacts #8 8291 3601- / 8291 3603- / 8291 3605- 8291 3607- / 8291 3609- 8291 3600- / 8291 3602- / 8291 3604- / 8291 3606- / 8291 3608- 6.5 to 7.5 Contact delivered with connector 5.8 Part number Stripping length L Male Female (mm) Machined contact #16 & #20 5 L L L L Without insulation support With insulation support L UTS Series Technical information Wire stripping crimp version Wire stripping solder version © 2011 – SOURIAU 157 One of the key factors which affects the performance of a connector, is the way contacts are terminated. Crimped connections are nowadays seen as the best solution to ensure quality throughout the lifetime of the product. Here are some reasons why we recommend this method of termination for UTS connectors: Advantages (Extract from the IEC 60352-2): - Effi cient processing of connections at each production level - Processing by fully-automatic or semi- automatic crimping machines, or with hand operated tools - No cold-soldered joints - No degradation of the spring characteristic of female contacts by the soldering temperature - No health risk from heavy metal and fl ux steam - Preservation of conductor fl exibility behind the crimped connection - No burnt, discolored and overheated wire insulation - Good connections with reproducible electrical and mechanical performances - Easy production control. To ensure that the crimp tooling is performing according tooriginal specifi cations, it is important to carry out regular checks. A common way to check the performance of tooling is with a simple pull test, ideally using a dedicated electric pull tester. Minimum recommended full forces are indicated in the tables below: Active contact part Contact type Die location on heads Wire section range Section (mm²) Tensile straight test (mini) Height (Mm) H (±0.075) Width (Mm) W (±0.075) Head's P/N Machined contacts size 20 RM/RC 24W3* 26/24 AWG 26 0.12 min 15 N 0.95 1.27 S20RCM AWG 24 0.25 max 32 N RM/RC 20W3* 22/20 AWG 22 0.32 min 40 N 1.26 1.78 AWG 20 0.50 max 60 N RM/RC 18W3* 20/18 AWG 20 0.50 max 60 N 1.35 1.86 AWG 18 0.82 max 90 N S & F contacts size 20 SM/SC 24WL3TK6* 26/24 AWG 26 0.12 min 15 N 0.80 1.49 S20SCM20 AWG 24 0.25 max 32 N SM/SC 20WL3TK6* 22/20 AWG 22 0.32 min 40 N 1.01 1.53 AWG 20 0.50 max 60 N Machined contacts size 16 RM/RC 28M1K* 30/28 AWG 30 0.05 min 11 N 1.14 1.41 S16RCM20 AWG 28 0.08 max 11 N RM/RC 24M9K* 26/24 AWG 26 0.12 min 15 N 1.15 1.41 AWG 24 0.25 max 32 N RM/RC 20M13K* 22/20 AWG 22 0.32 min 40 N 1.26 1.76 AWG 20 0.50 max 60 N RM/RC 20M12K* AWG 22 0.32 min 40 N AWG 20 0.50 max 60 N RM/RC 16M23K* 20 AWG 20 0.50 max 60 N 1.66 2.18 18 AWG 18 0.82 max 90 N 1.80 2.28 S16RCM16 16 AWG 16 1.50 max 150 N 1.96 2.43 RM/RC 14M30K* 16 AWG 16 1.50 min 150 N 2.10 2.68 S16RCM14 14 AWG 14 2.50 min 230 N 2.30 2.78 RM/RC 14M50K* 16 AWG 16 1.50 min 150 N 2.09 2.59 S16RCM1450 14 AWG 14 2.50 max 230 N 2.26 2.71 S & F contacts size 16 SM/SC 24ML1TK6* 26/24 AWG 26 0.12 min 15 N 0.84 1.50 S16SCM20 AWG 24 0.25 max 32 N SM/SC 20ML1TK6* 22/20 AWG 22 0.32 min 40 N 1.02 1.54 AWG 20 0.50 max 60 N SM/SC 16ML11TK6* 18 AWG 18 0.82 min 90 N 1.32 2.09 S16SCML11 16 AWG 16 1.50 max 150 N 1.36 2.10 SM/SC 16ML1TK6* 18 AWG 18 0.82 min 90 N 1.49 2.02 16 AWG 16 1.50 max 150 N 1.7 2.05 S16SCML1 SM/SC14ML1TK6* 14 AWG 14 2.50 max 230 N 1.79 2.58 (1): example of plating, for other plating see page 143 W W H H Machined contact Stamped & Formed contact UTS Series Technical information Crimping Technical information 158 © 2011 – SOURIAU • Strip wires, crimp or solder contacts • Insert contacts into connector cavities (insert manually or use tool RTM205 crimp contacts only) • Place receptacle in the panel cut-out, with optional gasket • Secure receptacle with screws (not supplied) Gasket (optional) Gasket (optional) Front mounting : Crimp version Rear mounting : Crimp version Optional coding ring Optional coding ring Panel thickness: 2.5mm max Panel Receptacle fl ange Receptacle fl ange 3mm max 3mm max Pa Gasket (optional) Optional coding ring Optional coding ring Front mounting : Solder version Rear mounting : Solder version Gasket (optional) UTS Series Technical information UTS 0 assembly (mounting suggestion) © 2011 – SOURIAU 159 Shell size Nut tightening torque (Nm) Ø Wire 10 1 from 1.7 mm to 3.0 mm 12 1.5 14 1.5 Nut Grommet + Compression ring Optional coding ring • Slide accessories on the cable (make sure to keep compression ring on the grommet) • Strip wires and crimp contacts • Insert fi rst contact into the grommet (fi rst contact in cavity A, use male contact to pierce the grommet, no tool is required), then insert the contact in the connector cavity A (insert manually or use tool RTM205) • Place the grommet and compression ring on the insulator • Insert the other contacts • Tighten nut (recommended torque: see note) Shell size Jam nut torque (Nm) Tool tightening Ø Wire Standard version Discrete wire sealing 8 1.5 19.05 3.2 mm max. from 1.7 mm to 3.0 mm 10 3 22.25 12 4 27.15 14 5 30.19 18 5 36.5 • Strip wires, crimp or solder contacts • Insert contacts into connector cavities (insert manually or use tool RTM205 crimp contacts only) • Seat o-ring, place receptacle in the panel cut-out • Tighten jam nut O-ring O-ring Jam nut Jam nut Panel thickness: 3.2mm max Panel thickness: 3.2mm max Optional coding ring Optional coding ring Crimp version Solder version Finally UTS Series Technical information UTS 7 assembly (mounting suggestion) UTS 6 GN / UTS 7 GN assembly Technical information 160 © 2011 – SOURIAU • Slide accessories on the cable • Strip external cable jacket • Strip wires and crimp contacts • Insert contacts into connector cavities (insert manually or use tool RTM205) • Tight adapter with plug, choose right seal (waste the other seal), tight nut with adapter (recommended torque values to be applied according to the table - right) • Caution: only one of both delivered gasket should be used ! Shell size Recommended jacket strip length (mm) Adapter tightening torque (Nm) Nut tightening torque (Nm) Ø Cable range Standard seal Ø Cable range Reducing seal Ø Wire Male Female 10 21 29 1.5 2 2.5/8.0 1.5/5.0 3.2 mm max. 12 25 33 2 2.5 5.0/12.0 3.0/9.0 14 29 36 3 2.5 7.0/14.0 5.0/12.0 18 37 45 4 3.5 9.0/18.0 7.0/16.0 Coding ring Nut Adapter + mounted gasket Make sure the seal is positioned as shown. • Slide accessories on the cable • Strip external cable jacket • Strip wires and solder contacts • Tight adapter with plug, choose right seal (waste the other seal), tight nut with adapter (recommended torque values to be applied according to the table - right) • Caution: only one of both delivered gasket should be used ! Shell size Recommended jacket strip length (mm) Adapter tightening torque (Nm) Nut tightening torque (Nm) Ø Cable range Standard seal Ø Cable range Reducing seal Ø Wire Male 8 17 1 0.75 2.5/6.5 1.5/5.0 3.2 mm max. 10 21 1.5 2 2.5/8.0 1.5/5.0 12 25 2 2.5 5.0/12.0 3.0/9.0 14 29 3 2.5 7.0/14.0 5.0/12.0 Make sure the seal is positioned as shown. Assembly instruction Coding ring Nut Adapter + mounted gasket UTS Series Technical information UTS 1 JC / UTS 6 JC assembly: Crimp version UTS 6 JC assembly: Solder version © 2011 – SOURIAU 161 Shell size UTS0 + UTS6 EN JC & CJC UTS0 + UTS6 EN GN UTS7 + UTS6 EN JC & CJC UTS7 + UTS6 EN GN A max B max C max D max 8 61.1 - 66.6 - 10 73.2 39.6 77.3 43.7 12 77.6 39.4 81.7 43.5 14 83.5 40 87.6 44.1 18 93.1 - 97.2 - UTS0 + UTS6 A B UTS7 + UTS6 C D • Slide accessories on the cable (make sure to keep compression ring on the grommet) • Strip external cable jacket • Strip wires and crimp contacts • Insert fi rst contact into the grommet (fi rst contact in cavity A, the contact pierces the grommet, no tool is required), then insert the contact in the connector cavity A (insert manually or use tool RTM205) • Place the grommet and compression ring on the insulator • Insert the other contacts • Tight adapter with plug, choose right seal (waste the other seal), tight nut with adapter (recommended torque values to be applied according to the table - right). Nut Adapter + mounted gasket Grommet + Compression ring Optional coding ring Shell size Recommended jacket strip length (mm) Adapter tightening torque (Nm) Nut tightening torque (Nm) Ø Cable range Standard seal Ø Cable range Reducing seal Ø Wire Male Female 10 21 29 1.5 2 2.5/8.0 1.5/5.0 from 1.7 mm to 3.0 mm 12 25 33 2 2.5 5.0/12.0 3.0/9.0 14 29 36 3 2.5 7.0/14.0 5.0/12.0 UTS Series Technical information UTS 1 GJC / UTS 6 GJC assembly Mated connector length Note: all dimensions are in mm Technical information 162 © 2011 – SOURIAU Extraction: Place the tool into the cavity from front face of the connector, push on the handle, then remove the contact.. Special case with the tool RX2025GE1: A - When setting up in the cell, keep fi rmly the tool by the hexagonal metallic part and insert tool in cavity. B - Push the tool by the handle to extract the contact. UTS Series Technical information 51060210924 51060210936 RX2025GE1 Contact size Extractor #20 RX20D44 #16 RX2025GE1 #12 51060210924 #8 51060210936 L L1 Shell size UTS0 UTS7 L max L1 max L2 max L3 max L max L1 max L2 max L3 max 8 42.8 36.8 80.7 57.2 46.8 36.8 85.8 57.2 10 55.8 50.3 98.6 92 60.5 50.3 102.7 92 12 57.1 51.4 99.3 93.7 61.4 51.4 106.4 93.7 14 62.5 56.3 100.3 94.6 67.6 56.3 104.8 94.6 L2 L3 Dimensions overmoulded harnesses Extraction tools Extraction tools instruction for size 16 RX20D44 © 2011 – SOURIAU 163 Rated current & working voltage The current carrying capacity of a connector is limited by the thermal properties of materials used in it's construction. The amount of current that can be handled depends on the size of cable used, the ambient temperature and the heat that is generated inside the connector. Part 3 of the IEC 60512 standard determines through a derating curve, the maximum current permissible, which varies from one layout to another (Fig.1 & Fig.2). Wire size plays an important role as well, since they help to dissipate heat and avoid overheating (Fig.1 & Fig.3). Please note that the curve should be adjusted when dealing with potential hot spots, which can occur as a result of unequal loading of current across a number of contacts. As a general rule, it is best to avoid locating power handling contacts in the middle of the connector; try to locate them towards the edge where heat can be dissipated more effectively. Eventually you should fi nd a level which represents the permissible operating range: The rated current is defi ned as uninterrupted continuous current that a connector can take when all contacts are energized simultaneously without exceeding the maximum limit of temperature. The earth contact is never loaded. 0 20 40 60 80 100 120 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) Fig.1: UTS 12-4 – 1.5mm² wires 0 20 40 60 80 100 120 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) Fig.2: UTS 12-8 – 1.5mm² wires Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) Fig.3: UTS 12-4 – 2.5mm² wires 33 35 UTS Series Technical information Current carrying capacity Technical information 164 © 2011 – SOURIAU Solar radiation affects all materials, but plastics can be susceptible to extreme degradation over time. The choice of materials for the UTS series was therefore a critical consideration. All over the world we are not exposed to the same amount of energy given by the sun. The chart shown here clearly illustrates this. So we performed test according to the ISO 4892-2 and simulated 5 years exposure to outdoor environments (temperature, humidity, etc...) After this period there was no signifi cant colour variation, no crazing, no cracking and no major variation of mechanical properties. Yearly mean of daily irradiation in UV (280-400 nm) on horizontal plane (J/cm²) (1990-2004) 90° 60° 30° 0° - 30° - 90° - 60° - 180° - 150° - 120° - 90° - 60° - 30° 0° 30° 60° 90° 120° 150° 180° J/cm² 0 10 20 30 50 60 70 80 90 100 110 120 130 150 160 170 180 190 40 140 UTS Series Technical information UV resistance © 2011 – SOURIAU 165 There are two main standards for industrial connectors: UL94 & UL1977 UL94 This standard is dedicated to plastics fl ammability. It characterises how the material burns in various orientation and thicknesses. The UTS series has been rated at V-0 & HB. Procedure: A specimen is supported in a vertical or horizontal position and a fl ame is applied to the bottom of the specimen. The fl ame is applied for ten seconds and then removed until fl aming stops, at which time the fl ame is reapplied for another ten seconds and then removed. Two sets of fi ve specimens are tested. The two sets are conditioned under different conditions. V-0 Vertical burning: • Specimens must not burn with fl aming combustion for more than 10 seconds after either test fl ame application. • Total fl aming combustion time must not exceed 50 seconds for each set of 5 specimens. • Specimens must not burn with fl aming or glowing combustion up to the specimen holding clamp. • Specimens must not drip fl aming particles that ignite the cotton. • No specimen can have glowing combustion remain for longer than 30 seconds after removal of the test fl ame. ~~ 5’’ 12’’ 45° Cotton Material Underwriter Laboratories HB Horizontal burning: • A material classed HB shall not have a burning rate exceeding 40 mm per minute over a 75 mm span for specimens having a thickness of 3.0 to 13 mm. • A material classed HB shall not have a burning rate exceeding 75 mm per minute over a 75 mm span for specimens having a thickness less than 3.0 mm. • A material classed HB shall cease to burn before the 100 mm reference mark. 45° 45° Material 100±1mm 25±1mm 10±1mm Wire gauze Wire gauze UTS Series Technical information Technical information 166 © 2011 – SOURIAU Underwriter Laboratories UL1977 There are several standards which deal with plug and receptacle. Each of them is only for a small area of applications. It could be telecommunication, Etc. The UL 1977 covers single and multipole connectors intended for factory assembly. Requirements apply to devices in taking into account intensity and voltage. There a categories as follows: Type 0 Type 1A Tybe 1B Type 2 Type 3 Type 4 0 0 8.3 A 31 A 200 A 1000 A 600 V 30 V (42 V peak) According to above table, the level of performance that has to be reached could be different. Most of them are explained in the following page. Assembly: Connector has to be keyed to prevent any mismating that can damage the machine or hurt the user. In the same way, plugs and sockets have to be equipped to protect persons against contact with live parts. Finally the identifi ed grounding contact shall be located so that the corresponding electrical continuity has to be completed before any other contact. Insulating materials: Material uses for electrical insulation, as a minimum, have to comply with the characteristics shown below: • Minimum ratings for polymeric materials Type Flame rating Relative thermal index (RTI) Electrical/mechanical w/o impact */** 0 - 50/50 1A HB 50/50 1B HB 50/50 2 HB 50/50 3 HB 50/50 4 HB 50/50 * The RTI of the material shall not be lower than the temperature measured during the Temperature Test. ** For a thickness less than that for which a value has been established, the RTI of the minimum thickness with an established value shall be used. UTS Series Technical information © 2011 – SOURIAU 167 Underwriter Laboratories UL1977 Spacing: For a 250V max connector, distance through air or over material shall be 1.2mm whereas from 250V to 600V connector the spacing is 3.2 minimum. These distances have to be taken between uninsulated live parts as shown in the matrix below: An alternative way to determine voltage rating is with the Dielectric-Withstand test. If during one minute there is no arc-over or breakdown the rated voltage is given as given below: a) 500 volts for a type 1B device b) 1000 volts plus twice rated voltage for types 1A, 2, 3 and 4 devices. • Applicability of spacing requirements Type Uninsulated live part - uninsulated live part of opposite polarity Uninsulated live part - uninsulated grounded metal part Uninsulated live part - exposed dead metal part 0 No No No 1A Yes Yes Yes 1B Yes Yes No 2 Yes Yes Yes 3 Yes Yes Yes 4 Yes Yes Yes Marking: A device shall be legibly marked with the manufacturer's trade name, trade mark, or other descriptive marking by which the organisation responsible for the product may be identifi ed. (Exception: If the device is too small, or where the legibility would be diffi cult to attain, the manufacturer’s name, trademark, or other descriptive marking may appear on the smallest unit container or carton) The following shall be marked on the device or on the smallest unit container or carton or on a stuffer sheet in the smallest unit container or carton: a) The catalogue number or an equivalent designation b) The electrical rating in both volts and amperes, if assigned c) Whether ac or dc, if restricted d) Flammability class, if identifi ed Example - Marking for the arrangement 10-3: 10A 500V UL94 V-0 UTS Series Technical information Technical information 168 © 2011 – SOURIAU The norm is dedicated to connectors with rated voltage above 50V and up to 1000V and rated currents up to 125A per contact. But depending of your application connectors should be compliant with another standard. This has to be double checked with the customer. There are lot of constructional requirements and performances specifi ed in that standard. Most of them are illustrated in greater details hereafter. Provisions for earthing: The UTS connector is intended to be used on Class II systems. Even if the purpose of our connector is not to interrupt current, we often see a need to add a protective earth contact. Then this one shall be a “First mate, last break” style. Critically, among all of the normal assumptions we make in designing a connector, this contact has to be considered as a live part and must be protected against electric shock by double or reinforced insulation. IP Code: IP is a coding system defi ned by the IEC 60529 to indicate the degrees of protection provided by an enclosure. The aim of this is to give information regarding the accessibility of live parts against ingress of water and other foreign bodies. 1st digit Degree of protection 2nd digit Degree of protection 0 No protection against accidental contact. No protection against solid foreign bodies. 0 No protection against water. 1 Protection against contacts with any large area by hand and against large solid foreign bodies with a diameter bigger than 50 mm. 1 Drip-proof. Protection against vertical water drips. 2 Protection against contacts with the fi ngers. Protection against solid foreign bodies with a diameter bigger than 12 mm. 2 Drip-proof. Protection against water drips up to a 15° angle. 3 Protection against tools, wires or similar objects with a diameter bigger than 2.5 mm. Protection against small solid bodies with a diameter bigger than 2.5 mm. 3 Spray-proof. Protection against diagonal water drips up to a 60° angle. 4 As 3 however diameter is bigger than 1 mm. 4 Splash-proof. Protection against splashed water from all directions. 5 Full protection against contacts. Protection against interior injurious dust deposits. 5 Hose-proof. Protection against water (out of a nozzle) from all directions. 6 Total protection against contacts. Protection against penetration of dust. 6 Protection against temporary fl ooding. 7 Protection against temporary immersions. 8 Protection against water pressure. Pressure to be specifi ed by supplier. 9K High pressure hose-proof. Protection against high pressure water (out of a nozzle) from all directions. IP 6 8 First digit (foreign bodies protection) Second digit (water protection) Code letters (international Protection) UTS offers high sealing performance IP68 / 69K… Even in dynamic situations. In addition to the IEC 60529 we conjointly use the DIN 40050 part 9 which are dedicated to road vehicles. The main differences are: • First digit: 5 replaced by 5K, 6 by 6K. In the DIN the tested equipment is not depressurized as it is in the IEC. • Second digit: 5K and 6K has been added and are equivalent respectively to 5 and 6 but with higher pressure. 9K which represents the High pressure cleaning. IEC 61984 ed.2.0 “Copyright © 2008 IEC Geneva, Switzerland.www.iec.ch" IEC 60664-1 ed.2.0 “Copyright © 2007 IEC Geneva, Switzerland.www.iec.ch” UTS Series Technical information IEC 61984 © 2011 – SOURIAU 169 Overvoltage UTS connectors are qualifi ed to be used on systems rated at Overvoltage category III Per the IEC 60664-1 (formely VDE 0110) each category is linked to the end application and where the device will be implemented: • Category IV (primary overcurrent protection equipment): Origin of the installation • Category III (Any fi xed installation with a permanent connection) Fixed installation and equipment and for cases where the reliability and the availability is subject to special requirements • Category II (Domestic applicances): Energy consuming equipment to be supplied from the fi xed installation • Category I (Protected electronic circuit): For connection to circuit in which measures are taken to limit transient overvoltage. Pollution degree Per the IEC 60664-1 (formerly VDE 0110) the environment affects the performance of the insulation. Particles can build a bridge between two metal parts. As a rule dust mixed with water can be conductive and more generally speaking metal dust is conductive. Finally, the standard defi nes 4 levels of pollution: • Degree 1 (Air conditioned dry room): No pollution or only dry, non conductive pollution occurs. The pollution has no infl uence. • Degree 2 (Personal computer in a residential area): Only non conductive pollution occurs except that occasionally a temporary conductivity caused by condensation is to be expected. • Degree 3 (Machine tools): Conductive pollution occurs or dry non-conductive pollution occurs which becomes conductive due to condensation which is to be expected. • Degree 4 (Equipments on roof, locomotives): Continuous conductivity occurs due to conductive dust, rain or other wet conditions. Finally, the harsher the environment is, the longer clearance and creepage distances should be. Nonetheless, according the IEC 61984, enclosure rated at IP54 or higher can be dimensioned for a lower pollution degree. This applies to mated connectors disengaged for test and maintenance. Marking The marking should give enough details to the user to know what the main characteristics are and without going deep in technical documentation. Below examples identify the suitability of the connector: • Example 1: Marking of a connector with rated current 16A, rated voltage 400V, rated impulse voltage 6kV and pollution degree 3, 2 and 1 for use in any system, preferably unearthed or delta-earthed systems: 16A 400V 6kV 3 • Example 2: Marking of a connector with rated current 16A, rated insulation voltages line-to-earth 250V, line-to-line 400V, rated impulse voltage 4kV and pollution degree 3, 2 and 1 for use in earthed systems: 1166AA 225500VV 440000VV 44kkVV 33 16A 400V 6kV 3 UTS Series Technical information IEC 61984 Technical information 170 © 2011 – SOURIAU Enclosure rating IP20 IP22 IP55 IP64 IP65 IP66 IP67 Type 1 • Type 3 • Type 3R • Type 3S • Type 4 • Type 4X • Type 6 • Type 12 • Type 13 • • indicates compliance 6 IP67 Enclosures constructed for either indoor or outdoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment, falling dirt, hosedirected water, the entry of water during occasional temporary submersion at a limited depth and damage from external ice formation. 6P IP67 Enclosures constructed for either indoor or outdoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment, falling dirt, hose-directed water, the entry of water during prolonged submersion at a limited depth and damage from external ice formation. Type 6 rating can be either Type 6 or Type 6P - please see below: • NEMA ratings vs IP ratings Whereas IP ratings only consider protection against ingress of foreign bodies - first digit - and ingress of water (second digit), NEMA ratings consider these but also verify protection from external ice, corrosive materials, oil immersion, etc. The correlation between NEMA & IP being limited only to dust and water, we can state that a NEMA type is equivalent to an IP rating but it is not possible to say the contrary. Below a list of some NEMA standards: UTS Series Technical information What is NEMA rating ? © 2011 – SOURIAU 171 Ethernet Basics Ethernet is a widely used communications protocol that is used to transmit data packets (datagrams) between network devices. Imagine a highway in a large metropolitan area six lanes wide at rush hour. The vehicles on the highway need rules to follow so that they get to their destination without crashing into each other. In an Ethernet network link, there could be 100 million bits of information transmitted in one second. In the Ethernet standard, there exist rules to govern packet structure, transmission requirements, error correction, communication with end equipment, etc. Examining the differences between 100Mhz, 100 Base TX, Cat5e; what does it all mean? When discussing connectors and Ethernet, there are a few key details to be aware of: • 100Mhz is a measurement of Frequency for the signal - Comparable to the Speed Limit of a highway • 100BaseTX (or Fast Ethernet) is an Ethernet link standard and identifi es available link bandwidth The bandwidth is measured in units of MBits/S (megabits per second) - Comparable to the number of cars that pass a point in one second • Cat5e is an EIA/TIA standard for performance and physical characteristics for cables and connectors - Comparable to performance specifi cations of the car and highway In connectors and cables, Fast Ethernet uses 2 pairs, one for transmit, one for receive. This, way data traffi c can fl ow in both directions simultaneously. In order to explain basic Ethernet theory, we can use a functional comparison to a busy city with highways, buildings, and cars. To illustrate this, the table below provides correlation between the different components/pieces/links that encompass Ethernet network connectivity, and the larger scale infrastructure of a metropolitan city. • City: The network itself • Buildings: End equipment, PC, server, etc. • Roads: Ethernet cabling • Cars: Data packets, datagrams, bits, bytes, etc. • Tolls: Firewalls • Bridges: Connectors • Traffi c laws: Protocol/communication specifi cations UTS Series Technical information Ethernet for the layman Technical information 172 © 2011 – SOURIAU Souriau offering: UTS Hi seal size 8, 4 contacts 1 (Pair 1) ‹ A 2 (Pair 1) ‹ C 3 (Pair 2) ‹ B 4 (Pair 2) ‹ D UTS size 10, 6 contacts 1 (Pair 1) ‹ A 2 (Pair 1) ‹ B 3 (Pair 2) ‹ E 4 (Pair 2) ‹ D UTS size 12, 10 contacts 1 (Pair 1) ‹ C 2 (Pair 1) ‹ B 3 (Pair 2) ‹ G 4 (Pair 2) ‹ H Standard solutions. 8E4/8D4 4 Ø 1 (#20) 106/10E6/10D6 6 Ø 1 (#20) 1210/12E10/12D10 10 Ø 1 (#20) What about using coax contacts ? Ethernet twisted pairs carry a symmetrical (balanced) signal. Once terminated into a coax contact, the inner core will be protected by a shield - but not the outer contact. Because of EMI issues, the signal will no longer be balanced. Conclusion - it does not work and is not recommended. Conclusion To carry 100Mb/s data signal, 100BaseTX or Fast Ethernet recommends the use of Cat5e connectors as well as Cat5e cable with the support of a 100MHz signal. Nevertheless, a 100Mb/s signal can be transmitted in certain conditions (short distance, only one connector, lower frequency but a different code) thru many other connection materials - not necessarily Cat5e rated. What about using Quadrax contacts ? The Quadrax contact is used in railway applications because of the use of quad cable. In this specifi c market, the standard Ethernet twisted pairs wires cannot be offered, they are too thin and often solid (not stranded). In the rest of industry, UTP (Unshielded Twisted Pairs) cables are widely used. The Quadrax contact is not designed to terminate them. And thus, are not advised for industrial applications. Shielding continuity done in cavity C&F. Note: Shielding can be replaced by DC power. UTS Series Technical information Ethernet for the layman © 2011 – SOURIAU 173 UTS Series Technical information Technical information UTS Series © 2011 – SOURIAU 175 Appendices UTS Series #16 coaxial contacts - cabling notices ................................................................................... 176 Glossary of terms ........................................................................................................................... 183 Discrimination/Keying methods ................................................................................................ 184 Part number Index ......................................................................................................................... 185 176 © 2011 – SOURIAU UTS Series Appendices #16 coaxial contacts Cable type Impedance Contact type Ø over jacket Ø over dielectric Inner cond size Ø outer braid Male contact kit for coaxial cable Female contact kit for coaxial cable inch mm inch mm Ext. Ø mm inch mm RG161/U 75 Multi piece 0.09 2.29 0.057 1.45 RMDXK10D28 RCDXK1D28 RG179A/U 75 0.105 2.67 0.063 1.6 0.3 0.084 2.13 max RG179B/U 75 0.105 2.67 0.063 1.6 0.3 0.084 2.13 max RG187/U 75 0.11 2.79 max 0.06 1.52 0.3 RG188/U 50 0.11 2.79 max 0.06 1.52 0.51 0.078 1.98 max RG174/U 50 0.11 2.92 0.06 1.52 0.48 0.088 2.24 max AMPHENOL 21-598 50 0.105 2.67 0.06 1.52 0.48 RG196/U 50 0.08 2.03 max 0.034 0.086 0.3 RG178A/U 50 0.075 1.91 0.034 0.86 0.3 0.054 1.37 max RG/188A/U 50 Mono crimp 0.110 2.79 0.06 1.52 0.51 0.078 1.98 max RMDX6036D28 RCDX6036D28 KX21TVT (europe) RG178 B/U 50 0.075 1.91 0.034 0.86 0.3 0.054 1.37 max RMDX6034D28 RCDX6034D28 RG178 / BU 50 0.075 1.91 0.034 0.86 0.3 0.054 1.37 max RMDX6050D28 RCDX6016D28 RG174/U 50 0.115 2.92 0.06 1.52 0.48 0.088 2.24 max RMDX6032D28 RCDX6032D28 RG188A/U 50 0.11 2.79 0.06 1.52 0.51 0.078 1.98 max RMDX6036D28 RCDX6036D28 RG316/U 50 0.107 2.72 0.6 1.52 0.51 0.078 2.05 max RMDX6036D28 RCDX6036D28 raychem 5024A3111 50 0.12 3.05 0.083 2.11 0.64 0.097 2.46 RMDX6052D28 RCDX6052D28 raychem 5026e1614 50 0.083 2.11 0.05 1.27 0.48 0.067 1.7 RMDX6036D28 RCDX6036D28 surprenant pn 8134 - Multi piece 0.1 2.54 0.058 1.47 0.3 RMDXK10D28 RCDXK1D28 PRD PN 247ASC1123- 001 - Mono crimp 0.103 2.62 0.06 1.52 0.51 0.078 1.98 RMDX6018D28 RCDX6018D28 PRD PN 247AS-C1251 - 0.092 2.34 0.05 1.27 0.64 0.067 1.7 RMDX6018D28 RCDX6018D28 JUDD C15013010902 - 0.087 2.13 0.05 1.27 0.48 0.066 1.67 RMDX6036D28 RCDX6036D28 CDC PIN22939200 - 0.09 2.29 0.048 1.22 0.3 0.064 1.63 RMDX6046D28 RCDX6016D28 CDC PIN22939200 - 0.09 2.29 0.048 1.22 0.3 0.064 1.63 RMDX6050D28 RCDX6016D28 CDC PIN245670000 - 0.104 2.64 0.067 1.7 0.3 0.083 2.11 RMDX6050D28 RCDX6016D28 ampex - 0.114 2.9 0.075 1.91 0.38 0.09 1.29 RMDX6032D28 RCDX6032D28 TI PN 920580 - 0.7 1.78 0.038 0.96 0.48 0.054 1.37 RMDX6024D28 RCDX6024D28 Honeywell PN 58000062 - 0.12 3.05 0.077 1.96 0.41 solid 0.096 2.44 RMDX6026D28 RCDX6026D28 - - 0.104 2.64 0.067 1.7 0.3 2.11 RMDX6050D28 - - - 0.09 2.29 0.048 1.22 0.3 1.63 RMDX6050D28 - - - 0.114 2.9 0.075 1.91 0.38 1.29 RMDX6032D28 RCDX6032D28 - - 0.07 1.78 0.038 0.96 0.48 1.37 RMDX6024D28 RCDX6024D28 - - 0.12 3.05 0.077 1.96 0.41 2.44 RMDX6026D28 RCDX6026D28 Coaxial cable - Contact monocrimp and multipiece © 2011 – SOURIAU 177 UTS Series Appendices Cable type Contact type Inner AWG cond Ø over jacket (single wire) Inner cond size Ø outer braid Male contact kit for coaxial cable Female contact kit for coaxial cable inch mm Stranded defi nition Ext. Ø mm inch mm 2#24 stranded mil w 16878 type B Multi piece 24 0.049 1.24 max 7/.008 - - RMDXK10D28 RCDXK1D28 2 #24 solid mil-w-76 type LW 24 0.047 1.12 max 1/.0201 - - RMDXK10D28 RCDXK1D28 2 #26 stranded mil w 76 type LW or mil w16878 type b&e 26 0.043 1.09 max 7/.0063 0.16 - - RMDXK10D28 RCDXK1D28 2 #28 solid mil-w-81822/3 28 0.028 0.71 max - - RMDXK10D28 RCDXK1D28 TWISTED PAIR 1/.201 SOLID MIL w 76 TYPE lw or MIL W 16878 26 0.044 1.12 max 1/.0201 0.511 - - RMDXK10D28 RCDXK1D28 twisted pair solid mil w 81822/3 28 0.028 0.71 max 1/.0126 0.32 - - RMDXK10D28 RCDXK1D28 #28 7/.0036 per Hitachi spec ec-711 (13-2820) Mono crimp - 0.046 1.17 7/.0036 - - - RMDX6031D28 + YORX090 RCDX6031D28 + YORX090 20218201 - 0.028 0.71 - - - - RMDX6031D28 + YORX090 RCDX6031D28 + YORX090 #30 solid - 0.025 0.64 - - - - RMDX6015D28 + YORX090 RCDX6015D28 + YORX090 #26 7/.0063 26 0.028 0.71 7/.063 0.16 - - RMDX6031D28 + YORX090 RCDX6031D28 + YORX090 #26 19/.004 26 0.049 1.24 19/.004 - - - RMDX6019D28 + YORX090 RCDX6019D28 + YORX090 #24 7/.008 24 0.049 1.24 7/.008 - - - RMDX6019D28 + YORX090 RCDX6019D28 + YORX090 #24 19/.005 24 0.057 1.45 19/.005 - - - RMDX6019D28 + YORX090 RCDX6019D28 + YORX090 - 26 - 1.25 - - - 19x0.1 RMDX6019D28 + YORX090 RCDX6019D28 + YORX090 - 24 - 1.25 - - - 7x0.2 RMDX6019D28 + YORX090 RCDX6019D28 + YORX090 - 24 - 1.45 - - - 19x0.13 RMDX6019D28 + YORX090 RCDX6019D28 + YORX090 - 26 - 0.7 - - - 7x0.16 RMDX6031D28 + YORX090 RCDX6031D28 + YORX090 Twisted cable - Contact monocrimp and multipiece Appendices 178 © 2011 – SOURIAU Twisted pair cable multipiece contact cabling UTS Series Appendices #16 coaxial contacts Cable reference Contact type Male contact Female contact Crimp tool Die set Stop bushing Cable strip length Inner conductor crimp Braid crimp A B C g dim t dim g dim t dim 2#24 stranded mil w 16878 type B Multi piece RMDXK10D28 RCDXK1D28 M10S1J - - See assembly notice 2 #24 solid mil-w-76 type LW 2 #26 stranded mil w 76 type LW or mil w16878 type B & E 2 #28 solid mil-w-81822/3 twisted pair 1/.201 solid mil w 76 type LW or mil w 16878 twisted pair solid mil w 81822/3 Male contact Outer male contact RMDX60-2 Inner socket RFD26L-1 Outer hyring YOC074 Inner supporting sleeve RMDXB-055-3 Twisted pair adapter YORK-090 Conductor "Y" Conductor "Z" Strip lengths of cable 7.95±0.41 15.54±0.41 7.95±0.41 Inner supporting Outer hyring sleeve Twisted pair adapter Locking louver typical Grounding louver typical Step 1: Step 2: Step 3: 7.54 0.25±0.05 5.94±0.41 7.54±0.41 15.54±0.41 7.95±0.41 When using solid wire fl atten conductor "X" and "Z" using N24FL-1 die as shown Female contact Step 1: Step 2: Step 3: Outer hyring Supporting sleeve Twisted pair adapter Conductor "W" Conductor "X" Strip lengths of cable 6.35±0.41 13.49±0.41 7.95±0.41 Outer female contact RCDX60-2 Inner pin RMD26L-1 Outer hyring YOC074 Inner supporting sleeve RCDXB-055-1 Twisted pair adapter YORK-090 Note : all dimensions are in mm © 2011 – SOURIAU 179 Twisted pair cable monocrimp contact cabling UTS Series Appendices Cable reference Contact type Male contact Female contact Crimp tool Die set Stop bushing Cable strip length Inner conductor crimp Braid crimp A B C g dim t dim g dim t dim #28 7/.0036 per Hitachi spec ec-711 (13-2820) Mono crimp RMDX6031D28 + YORX090 RCDX6031D28 + YORX090 M10S1J S80 SL105 4.7 6.1 4.32 1.30 to 1.12 1.4 to 1.22 2.97 to 2.84 3.07 to 2.9 20218204 S80 SL105 3.94 6.1 3.16 1.30 to 1.17 1.4 to 1.22 2.97 to 2.84 3.07 to 2.79 #30 solid S83 SL105 4.7 6.1 4.06 1.22 to 1.12 1.35 to 1.22 2.97 to 2.84 3.12 to 2.95 #26 7/.0063 S80 SL105 4.7 6.1 4.06 1.30 to 1.17 1.4 to 1.22 2.97 to 2.84 3.07 to 2.9 #26 19/.004 M10SG8 ASSY'Y TOOL DIE SET STOP BUSHING M10S1J TOOL 4.7 6.1 4.06 1.22 to 1.17 1.35 to 1.22 2.84 to 2.79 3.12 to 2.97 #24 7/.008 4.7 6.1 4.06 1.22 to 1.17 1.35 to 1.22 2.84 to 2.79 3.12 to 2.97 #24 19/.005 4.7 6.1 4.06 1.22 to 1.17 1.35 to 1.22 2.84 to 2.79 3.12 to 2.97 AWG26 (19x0.1) M10SG8 crimping kit 4.7 6 4 AWG24 (7x0.2) AWG24 (19x0.13) AWG26 (7x0.16) S80 SL150 G G Braid crimp (G) to be measured with die set fully closed Inner conductor crimp (G) to be measured with die set fully closed RCDX60 Female coax contact RMDX60 Male coax contact See cable strip lengths Cable strip length A B C 16 min. • Select appropriate monocrimp coax twisted pair contact and cable combination. • Select appropriate crimp tooling (hand tool, S-die set, stop bushing). • Strip the twisted pair cable to the designated wire strip lengths. • Insert the stripped cable into the contact. One cable is to be inserted into the inside diameter of hyring, and pushed forwaerd into the inner contact. The second cable is to be inserted between the outside diameter of hyring and the inside diameter of the outer contact body. • Crimp the contact. Note : all dimensions are in mm Appendices 180 © 2011 – SOURIAU Multipiece male contact with coax cable UTS Series Appendices Multipiece kit details RMDXK10D28 includes RMDX602D28 Outer contact RFD26L1D28 Inner contact YOC074 Outer hyring RMDXB0553 Inner supporting sleeve Cable stip length A B C Dielectric diameter Contact assembly with dielectric diameter over 1.4mm - without inner supporting sleeve Outer male contact RMDX60-2 Inner socket RFD26L-1 Outer hyring YOC074 Strip lengths of cable 15.88±0.41 4.37±0.41 7.95±0.41 Step 1: - Assemble outer hyring onto cable - Assemble inner socket to inner conductor and crimp Step 2: - Insert the assembly into the outer male contact until the inner socket snaps into place - The cable braid (shield) should now cover the barrel of the outer male contact as shown Step 3: - Slide outer hyring forward against spring and crimp in place as shown Locking louver typical Grounding louver typical Contact assembly with dielectric diameter under 1.4mm - with inner supporting sleeve Outer male contact RMDX60-2 Inner socket RFD26L-1 Outer hyring YOC074 Strip lengths of cable 17.53±0.41 7.54±0.41 Inner supporting 9.12±0.41 sleeve RMDXB-055-3 Step 1: - Assemble outer hyring onto cable - Assemble supporting sleeve over dielectric and under braid - Assemble inner socket to inner conductor, push back against sleeve and crimp Supporting sleeve Outer hyring Step 2: - Insert the assembly into the outer male contact until the inner socket snaps into place - The cable braid (shield) should now cover the barrel of the outer male contact as shown Step 3: - Slide outer hyring forward against spring and crimp in place as shown Locking louver typical Grounding louver typical Note : all dimensions are in mm #16 coaxial contacts Cable reference Contact Hyring complementary compoments Outer contact crimp tool Inner contact crimp tool Crimp tool M10S1J Crimp tool M10S1J Cable strip length Die set Stop bushing Die set Stop bushing A B C RG161U Male: RMDXK10D28 YOC074 S221 SL471 S23D2 SL46D2 4.37 7.95 15.88 RG179 4.37 7.95 15.88 RG187U 4.37 7.95 15.88 RG188/U S26D2 4.37 7.95 15.88 RG174/U 4.37 7.95 15.88 RG178A/U YOC074 + RMDXB0553 S23D2 7.54 9.12 17.53 RG196U 7.54 9.12 17.53 AMPHENOL 21-598 YOC074 - 4.37 7.95 15.88 surprenant pn 8134 - 4.37 7.95 15.88 © 2011 – SOURIAU 181 Multipiece female contact with coax cable UTS Series Appendices Contact assembly with dielectric diameter over 1.4mm - without inner supporting sleeve Outer female contact RCDX60-2 Inner pin RMD26L-1 Outer hyring YOC074 Strip lengths of cable 11.13±0.41 4.37±0.41 Step 1: - Assemble outer hyring onto cable - Assemble inner pin to inner conductor and crimp Step 2: - Insert the assembly into the outer female contact until the inner pin snaps into place - The cable braid (shield) should now cover the barrel of the outer female contact as shown Step 3: - Slide outer hyring forward against spring and crimp in place as shown Contact assembly with dielectric diameter under 1.4mm - with inner supporting sleeve Outer female contact RCDX60-2028 Inner pin RMD26L-1 Outer hyring YOC074 Strip lengths of cable 11.13±0.41 6.35±0.41 Supporting sleeve RCDXB-055-1 Supporting Outer hyring sleeve Step 1: - Assemble outer hyring onto cable - Assemble supporting sleeve over dielectric and under braid - Assemble inner pin to inner conductor, push back against sleeve and crimp Step 2: - Insert the assembly into the outer female contact until the inner pin snaps into place - The cable braid (shield) should now cover the barrel of the outer female contact as shown Step 3: - Slide outer hyring forward against spring and crimp in place as shown RCDXK1D28 includes RCDX602D28 Outer contact RMD26L1D28 Inner contact YOC074 Outer hyring RCDXB0553 Inner supporting sleeve Multipiece kit details Cable stip length A B C Dielectric diameter Cable reference Contact Hyring complementary compoments Outer contact crimp tool Inner contact crimp tool Crimp tool M10S1J Crimp tool M10S1J Cable strip length Die set Stop bushing Die set Stop bushing A B C RG161U Female: RCDXK1D28 YOC074 S221 SL471 S23D2 SL46D2 4.37 - 11.13 RG179 4.37 11.13 RG187U 4.37 11.13 RG188/U S26D2 4.37 11.13 RG174/U 4.37 11.13 RG178A/U YOC074 + RMDXB0553 S23D2 6.35 11.13 RG196U 6.35 11.13 AMPHENOL 21-598 YOC074 - 4.37 11.13 surprenant pn 8134 - 4.37 11.13 Note : all dimensions are in mm Appendices 182 © 2011 – SOURIAU Coax cable with monocrimp contact cabling UTS Series Appendices RCDX60 Female coax contact RMDX60 Male coax contact See cable strip lengths Cable strip length A B C • Select appropriate cable and contact combination. • Select appropriate crimp tooling (hand tool, S-die set, stop bushing). • Strip coax cable to the designated wire strip lengths. • Insert the stripped coax into the rear of the contact. • Crimp the contact. #16 coaxial contacts Cable reference Male contact Female contact Crimp tool Die set Stop bushing Cable strip length Inner conductor crimp Braid crimp A B C g dim t dim g dim t dim CDC PIN22939200 RMDX6046D28 RCDX6016D28 M10S1J S80 SL105 4.19 5.97 8.51 1.30/1.17 1.40/1.22 2.77/2.64 3.02/2.84 CDC PIN22939200 RMDX6046D28 RCDX6016D28 S87 SL105 5.08 6.35 8.89 1.30/1.17 1.40/1.22 2.77/2.64 3.02/2.84 CDC PIN245670000 RMDX6050D28 RCDX6016D28 S80 SL105 5.08 6.35 8.89 1.30/1.17 1.40/1.22 2.97/2.84 3.12/2.95 KX21TVT (europe) RG178 B/U RMDX6034D28 RCDX6034D28 S82 SL105 5.08 6.35 8.89 1.30/1.17 1.32/1.17 2.84/2.74 3.07/2.9 RG178 / BU RMDX6050D28 RCDX6016D28 S87 SL105 5.08 6.35 8.89 1.30/1.17 1.40/1.22 2.77/2.64 3.02/2.84 ampex RMDX6032D28 RCDX6032D28 S80 SL105 5.08 6.35 11.68 1.30/1.17 1.40/1.22 2.97/2.84 3.12/2.95 TI PN 920580 RMDX6024D28 RCDX6024D28 S82 SL105 5.08 6.35 8.89 1.35/1.19 1.42/1.27 2.87/2.74 3.07/2.9 RG174/U RMDX6032D28 RCDX6032D28 S80 SL105 5.08 6.35 11.68 1.30/1.17 1.40/1.22 2.97/2.84 3.12/2.95 Honeywell PN 58000062 RMDX6026D28 RCDX6026D28 S82 SL105 5.08 6.35 8.89 1.35/1.19 1.42/1.27 2.87/2.74 3.07/2.9 RG188A/U RMDX6036D28 RCDX6036D28 S80 SL105 5.08 6.35 11.68 1.30/1.17 1.40/1.22 2.97/2.84 3.12/2.95 RG316/U RMDX6036D28 RCDX6036D28 S80 SL105 5.08 6.35 11.68 1.30/1.17 1.40/1.22 2.97/2.84 3.12/2.95 PRD PN 247AS-C1123-001 RMDX6018D28 RCDX6018D28 M10SG8 ASSY'Y TOOL DIE SET STOP BUSHING M10S1J TOOL 5.08 6.35 8.89 1.22/1.17 1.35/1.22 2.92/2.79 3.12/2.97 PRD PN 247AS-C1251 RMDX6018D28 RCDX6018D28 5.08 6.35 8.89 1.22/1.17 1.35/1.22 2.92/2.79 3.12/2.97 raychem 5024A3111 RMDX6052D28 RCDX6052D28 S88 SL105 5.08 6.35 11.68 1.37/1.27 1.45/1.32 2.92/2.79 raychem 5026e1614 RMDX6036D28 RCDX6036D28 M10SG8 ASSY'Y TOOL DIE SET STOP BUSHING M10S1J TOOL 5.08 6.35 8.89 1.22/1.17 1.35/1.22 2.92/2.79 3.12/2.97 JUDD C15013010902 RMDX6036D28 RCDX6036D28 5.08 6.35 8.89 1.22/1.17 1.35/1.22 2.92/2.79 3.12/2.97 inner cond. #30, braid diam 2.64 RMDX6050D28 - S80 SL105 5.1 6.35 8.9 - - - - inner cond. #30, braid diam 2.29 RMDX6050D28 - S87 SL105 4.2 6.35 8.5 - - - - inner cond. #28, braid diam 2.9 RMDX6032D28 RCDX6032D28 S80 SL105 5.1 6.35 11.7 - - - - inner cond. #26, braid diam 1.78 RMDX6024D28 RCDX6024D28 S82 SL105 5.1 6.35 8.9 - - - - inner cond. #26, braid diam 3.05 RMDX6026D28 RCDX6026D28 S82 SL105 5.1 6.35 8.9 - - - - Note : all dimensions are in mm © 2011 – SOURIAU 183 Glossary of terms UTS Series Appendices • Clearance Per the IEC 60664-1 it is the shortest distance between two conductive parts even over the air. • Creepage distance Per the IEC 60664-1 it represents the shortest distance along the surface of the insulating material between two conductive parts. • Working voltage Per the IEC 60664-1 it is the highest r.m.s. value of A.C. or D.C. voltage across any particular insulation which can occur when the equipment is supplied at rated voltage. • Rated impulse voltage Impulse withstands voltage value assigned by the manufacturer to the equipment or to a part of it characterizing the specifi ed withstand capability of its insulation against transient overvoltage. • Working current It is the maximum continuous and not interrupted current able to be carried by all contacts without exceeding the maximum temperature of the insulating material. • Transient voltage Extract from the IEC 60664-1: Short duration overvoltage of a few millisecond or less, oscillatory or non-oscillatory, usually highly damped. • CTI (Comparative Tracking Index) The CTI value is commonly used to characterize the electrical breakdown properties of an insulating material. It allows users to know the tendency to create creepage paths. This value represents the maximum voltage after 50 drops of ammonium chloride solution without any breakdown. • RTI (Relative temperature Index): Extract from ULs website: “Maximum service temperature for a material, where a class of critical property will not be unacceptably compromised through chemical thermal degradation, over the reasonable life of an electrical product, relative to a reference material having a confi rmed, acceptable corresponding performance defi ned RTI. - RTI Elec: Electrical RTI, associated with critical electrical insulating properties. - RTI Mech Imp: Mechanical Impact RTI, associated with critical impact resistance, resilience and fl exibility properties. - RTI Mech Str: Mechanical Strength (Mechanical without Impact) RTI, associated with critical mechanical strength where impact resistance, resilience and fl exibility are not essential” Air gap Creepage distance Appendices 184 © 2011 – SOURIAU Discrimination/Keying methods UTS Series Appendices N (Normal) Note: Insert rotated in body (viewed from front face of male insert) In applications where similar connectors are used next to each other, mismatching can be a reason for disturbances, system failure or even danger to operating personnel. To eliminate mismatching, all TRIM TRIO® connectors can be equipped with discrimination keys, which offer unlimited possibilities for an error avoiding interconnection system. The other way around is to rotate the insert into the shell. Connectors with rotated inserts can be ordered by adding the suffix W, X, Y or Z to the standard part number. e.g. UTS6JC104S (N key) UTS6JC104SW (W key) Other keys Shell size Layout Discrimination keys degrees W X Y Z 8 8E2 58° 122° 8E3 8E3A 60° 210° 8E4 45° 8E33 90° 10 102W2 103 104 106 10E6 10E7 90° 10E98 90° 180° 240° 270° 12 12E2 12E3 180° 124 128 12E8 90° 112° 203° 292° 1210 12E10 60° 155° 270° 295° 12E14 45° 14 14E5 40° 92° 184° 273° 142G1 147 1412 60° 14E12 43° 90° 14E15 17° 110° 155° 234° 14E18 15° 90° 180° 270° 1419 30° 165° 315° 14E19 30° 165° 315° 18 18E11 62° 119° 241° 340° 1823 158° 270° 18E30 180° 193° 285° 350° 1832 18E32 85° 138° 222° 265° © 2011 – SOURIAU 185 UTS Series Appendices Part number Index Mechanics UTS0104P................... P. 68 UTS0104S................... P. 68 UTS010D6P.................. P. 68 UTS010D6S.................. P. 68 UTS010D7P.................. P. 68 UTS010D7S.................. P. 68 UTS010D98P................. P. 84 UTS010D98S................. P. 84 UTS010E6P.................. P. 80 UTS010E6S.................. P. 80 UTS010E7P.................. P. 92 UTS010E7S.................. P. 92 UTS010E98P................. P. 84 UTS010E98S................. P. 84 UTS0124P................... P. 52 UTS0128P................... P. 96 UTS0128S................... P. 96 UTS012D10P................. P. 104 UTS012D10S................. P. 104 UTS012D14P................. P. 116 UTS012D14S................. P. 116 UTS012D2P.................. P. 24 UTS012D2S.................. P. 24 UTS012D3P.................. P. 48 UTS012D3S.................. P. 48 UTS012D4P.................. P. 68 UTS012D4S.................. P. 68 UTS012D8P.................. P. 100 UTS012D8S.................. P. 100 UTS012E10P................. P. 104 UTS012E10S................. P. 104 UTS012E14P................. P. 116 UTS012E14S................. P. 116 UTS012E2P.................. P. 24 UTS012E2S.................. P. 24 UTS012E3P.................. P. 48 UTS012E3S.................. P. 48 UTS012E4P.................. P. 52 UTS012E4S.................. P. 52 UTS012E8P.................. P. 100 UTS012E8S.................. P. 100 UTS01412P.................. P. 108 UTS01412S.................. P. 108 UTS0147P................... P. 88 UTS014D12P................. P. 112 UTS014D12S................. P. 112 UTS014D15P................. P. 120 UTS014D15S................. P. 120 UTS014D18P................. P. 124 UTS014D18S................. P. 124 UTS014D5P.................. P. 120 UTS014D5S.................. P. 120 UTS014E12P................. P. 112 UTS014E12S................. P. 112 UTS014E15P................. P. 120 UTS014E15S................. P. 120 UTS014E18P................. P. 124 UTS014E18S................. P. 124 UTS014E19P................. P. 128 UTS014E19S................. P. 128 UTS014E5P.................. P. 120 UTS014E5S.................. P. 120 UTS014E7P.................. P. 88 UTS014E7S.................. P. 88 UTS01823P.................. P. 132 UTS01823S.................. P. 132 UTS08D2P................... P. 20 UTS08D2P................... P. 20 UTS08D2S................... P. 20 UTS08D2S................... P. 20 UTS08D33P.................. P. 44 UTS08D33P.................. P. 44 UTS08D33S.................. P. 44 UTS08D33S.................. P. 44 UTS08D3AP.................. P. 36 UTS08D3AS.................. P. 36 UTS08D3P................... P. 36 UTS08D3P................... P. 36 UTS08D3S................... P. 36 UTS08D3S................... P. 36 UTS08D4P................... P. 60 UTS08D4P................... P. 60 UTS08D4S................... P. 60 UTS08D4S................... P. 60 UTS08D98P.................. P. 40 UTS08D98S.................. P. 40 UTS08E2P................... P. 20 UTS08E2S................... P. 20 UTS08E33P.................. P. 44 UTS08E33S.................. P. 44 UTS08E3AP.................. P. 40 UTS08E3AS.................. P. 40 UTS08E3P................... P. 36 UTS08E3S................... P. 36 UTS08E4P................... P. 60 UTS08E4S................... P. 60 UTS08E98P.................. P. 40 UTS08E98S.................. P. 40 UTS1GJC104P................ P. 68 UTS1GJC128P................ P. 96 UTS1GJC1412P............... P. 108 UTS1GJC147P................ P. 88 UTS1GN104P................. P. 68 UTS1GN128P................. P. 96 UTS1GN1412P................ P. 108 UTS1GN147P................. P. 88 UTS1JC102W2P............... P. 64 UTS1JC102W2S............... P. 64 UTS1JC103P................. P. 40 UTS1JC103S................. P. 40 UTS1JC103W3P............... P. 40 UTS1JC103W3S............... P. 40 UTS1JC104P................. P. 68 UTS1JC104S................. P. 68 UTS1JC106P................. P. 80 UTS1JC106S................. P. 80 UTS1JC1210P................ P. 104 UTS1JC1210S................ P. 104 UTS1JC124P................. P. 52 UTS1JC124PSCR.............. P. 52 UTS1JC124S................. P. 52 UTS1JC128P................. P. 96 UTS1JC128S................. P. 96 UTS1JC1412P................ P. 108 UTS1JC1412S................ P. 108 UTS1JC1419P................ P. 128 UTS1JC1419S................ P. 128 UTS1JC142G1P............... P. 32 UTS1JC142G1S............... P. 32 UTS1JC147P................. P. 88 UTS1JC147PSCR.............. P. 88 UTS1JC147S................. P. 88 UTS1JC1823P................ P. 132 UTS1JC1823S................ P. 132 UTS1JC1832P................ P. 136 UTS1JC1832S................ P. 136 UTS6102W2P................. P. 64 UTS6102W2S................. P. 64 UTS6103P................... P. 40 UTS6103S................... P. 40 UTS6103W3P................. P. 40 UTS6103W3S................. P. 40 UTS6104P................... P. 68 UTS6104S................... P. 68 UTS6106P................... P. 80 UTS6106S................... P. 80 UTS610E6P.................. P. 80 UTS610E6S.................. P. 80 UTS610E7P.................. P. 92 UTS610E7S.................. P. 92 UTS610E98P................. P. 84 UTS610E98S................. P. 84 Appendices 186 © 2011 – SOURIAU UTS Series Appendices UTS61210P.................. P. 104 UTS61210S.................. P. 104 UTS6124P................... P. 52 UTS6124S................... P. 52 UTS6128P................... P. 96 UTS6128S................... P. 96 UTS612E10P................. P. 104 UTS612E10S................. P. 104 UTS612E14P................. P. 116 UTS612E14S................. P. 116 UTS612E2P.................. P. 24 UTS612E2S.................. P. 24 UTS612E3P.................. P. 48 UTS612E3S.................. P. 48 UTS612E4P.................. P. 52 UTS612E4S.................. P. 52 UTS612E8P.................. P. 100 UTS612E8S.................. P. 100 UTS61412P.................. P. 108 UTS61412S.................. P. 108 UTS61419P.................. P. 128 UTS61419S.................. P. 128 UTS6142G1P................. P. 32 UTS6142G1S................. P. 32 UTS6147P................... P. 88 UTS6147S................... P. 88 UTS614E12P................. P. 112 UTS614E12S................. P. 112 UTS614E15P................. P. 120 UTS614E15S................. P. 120 UTS614E18P................. P. 124 UTS614E18S................. P. 124 UTS614E19P................. P. 128 UTS614E19S................. P. 128 UTS614E5P.................. P. 72 UTS614E5S.................. P. 72 UTS61823P.................. P. 132 UTS61823S.................. P. 132 UTS61832P.................. P. 136 UTS61832S.................. P. 136 UTS6183G1P................. P. 56 UTS68E2P................... P. 20 UTS68E2S................... P. 20 UTS68E33P.................. P. 44 UTS68E33S.................. P. 44 UTS68E3AP.................. P. 40 UTS68E3AS.................. P. 40 UTS68E3P................... P. 36 UTS68E3S................... P. 36 UTS68E4P................... P. 60 UTS68E4S................... P. 60 UTS68E98P.................. P. 40 UTS68E98S.................. P. 40 UTS6GJC104S................ P. 68 UTS6GJC128S................ P. 96 UTS6GJC1412S............... P. 108 UTS6GJC147S................ P. 88 UTS6GN104S................. P. 68 UTS6GN128S................. P. 96 UTS6GN1412S................ P. 108 UTS6GN147S................. P. 88 UTS6JC102W2P............... P. 64 UTS6JC102W2S............... P. 64 UTS6JC103P................. P. 40 UTS6JC103S................. P. 40 UTS6JC103W3P............... P. 40 UTS6JC103W3S............... P. 40 UTS6JC104P................. P. 68 UTS6JC104S................. P. 68 UTS6JC106P................. P. 80 UTS6JC106S................. P. 80 UTS6JC10E6P................ P. 80 UTS6JC10E6S................ P. 80 UTS6JC10E7P................ P. 92 UTS6JC10E7S................ P. 92 UTS6JC10E98P............... P. 84 UTS6JC10E98S............... P. 84 UTS6JC1210P................ P. 104 UTS6JC1210S................ P. 104 UTS6JC124P................. P. 52 UTS6JC124PSCR.............. P. 52 UTS6JC124S................. P. 52 UTS6JC124SSCR.............. P. 52 UTS6JC128P................. P. 96 UTS6JC128S................. P. 96 UTS6JC12E10P............... P. 104 UTS6JC12E10S............... P. 104 UTS6JC12E14P............... P. 116 UTS6JC12E14S............... P. 116 UTS6JC12E2P................ P. 24 UTS6JC12E2S................ P. 24 UTS6JC12E3P................ P. 48 UTS6JC12E3S................ P. 48 UTS6JC12E4P................ P. 52 UTS6JC12E4S................ P. 52 UTS6JC12E8P................ P. 100 UTS6JC12E8S................ P. 100 UTS6JC1412P................ P. 108 UTS6JC1412S................ P. 108 UTS6JC1419P................ P. 128 UTS6JC1419S................ P. 128 UTS6JC142G1P............... P. 32 UTS6JC142G1S............... P. 32 UTS6JC147P................. P. 88 UTS6JC147PSCR.............. P. 88 UTS6JC147S................. P. 88 UTS6JC147SSCR.............. P. 88 UTS6JC14E12P............... P. 112 UTS6JC14E12S............... P. 112 UTS6JC14E15P............... P. 120 UTS6JC14E15S............... P. 120 UTS6JC14E18P............... P. 124 UTS6JC14E18S............... P. 124 UTS6JC14E19P............... P. 128 UTS6JC14E19S............... P. 128 UTS6JC14E5P................ P. 72 UTS6JC14E5S................ P. 72 UTS6JC14E7P................ P. 88 UTS6JC14E7S................ P. 88 UTS6JC1823P................ P. 132 UTS6JC1823S................ P. 132 UTS6JC1832P................ P. 136 UTS6JC1832S................ P. 136 UTS6JC183G1P............... P. 56 UTS6JC8E2P................. P. 20 UTS6JC8E2S................. P. 20 UTS6JC8E33P................ P. 44 UTS6JC8E33S................ P. 44 UTS6JC8E3AP................ P. 40 UTS6JC8E3AS................ P. 40 UTS6JC8E3P................. P. 36 UTS6JC8E3S................. P. 36 UTS6JC8E4P................. P. 60 UTS6JC8E4S................. P. 60 UTS6JC8E98P................ P. 40 UTS6JC8E98S................ P. 40 UTS7102W2P................. P. 64 UTS7102W2S................. P. 64 UTS7103P................... P. 40 UTS7103S................... P. 40 UTS7103W3P................. P. 40 UTS7103W3S................. P. 40 UTS7104P................... P. 68 UTS7104S................... P. 68 UTS7106P................... P. 80 UTS7106S................... P. 80 UTS710D6P.................. P. 80 UTS710D6P32................ P. 80 UTS710D6S.................. P. 80 UTS710D6S32................ P. 80 UTS710D7P.................. P. 92 UTS710D7P32................ P. 92 UTS710D7S.................. P. 92 © 2011 – SOURIAU 187 UTS Series Appendices UTS710D7S32................ P. 92 UTS710D98P................. P. 84 UTS710D98P32............... P. 84 UTS710D98S................. P. 84 UTS710D98S32............... P. 84 UTS710E6P.................. P. 80 UTS710E6S.................. P. 80 UTS710E7P.................. P. 92 UTS710E7S.................. P. 92 UTS710E98P................. P. 84 UTS710E98S................. P. 84 UTS71210P.................. P. 104 UTS71210S.................. P. 104 UTS7124P................... P. 52 UTS7124PSCR................ P. 52 UTS7124S................... P. 52 UTS7124SSCR................ P. 52 UTS7128P................... P. 96 UTS7128PSEK9............... P. 96 UTS7128S................... P. 96 UTS712CCRG................. P. 26 UTS712CCRR................. P. 26 UTS712CCRY................. P. 26 UTS712D10P................. P. 104 UTS712D10P32............... P. 104 UTS712D10S................. P. 104 UTS712D10S32............... P. 104 UTS712D14P................. P. 116 UTS712D14P32............... P. 116 UTS712D14S................. P. 116 UTS712D14S32............... P. 116 UTS712D2P.................. P. 24 UTS712D2P32................ P. 24 UTS712D2S.................. P. 24 UTS712D2S32................ P. 24 UTS712D3P.................. P. 48 UTS712D3P32................ P. 48 UTS712D3S.................. P. 48 UTS712D3S32................ P. 48 UTS712D4P.................. P. 52 UTS712D4P32................ P. 52 UTS712D4S.................. P. 52 UTS712D4S32................ P. 52 UTS712D8P.................. P. 100 UTS712D8P32................ P. 100 UTS712D8S.................. P. 100 UTS712D8S32................ P. 100 UTS712E10P................. P. 104 UTS712E10S................. P. 104 UTS712E14P................. P. 116 UTS712E14S................. P. 116 UTS712E2P.................. P. 24 UTS712E2S.................. P. 24 UTS712E3P.................. P. 48 UTS712E3S.................. P. 48 UTS712E4P.................. P. 52 UTS712E4S.................. P. 52 UTS712E8P.................. P. 100 UTS712E8S.................. P. 100 UTS71412P.................. P. 108 UTS71412S.................. P. 108 UTS71419P.................. P. 128 UTS71419S.................. P. 128 UTS7142G1P................. P. 32 UTS7142G1S................. P. 32 UTS7142G1SNPT.............. P. 32 UTS7147P................... P. 88 UTS7147PSCR................ P. 88 UTS7147PSEK9............... P. 88 UTS7147S................... P. 88 UTS7147SSCR................ P. 88 UTS714D12P................. P. 112 UTS714D12P32............... P. 112 UTS714D12S................. P. 112 UTS714D12S32............... P. 112 UTS714D15P................. P. 120 UTS714D15P32............... P. 120 UTS714D15S................. P. 120 UTS714D15S32............... P. 120 UTS714D18P................. P. 124 UTS714D18P32............... P. 124 UTS714D18S................. P. 124 UTS714D18S32............... P. 124 UTS714D19P................. P. 128 UTS714D19P32............... P. 128 UTS714D19S................. P. 128 UTS714D19S32............... P. 128 UTS714D5P.................. P. 120 UTS714D5P32................ P. 120 UTS714D5S.................. P. 120 UTS714D5S32................ P. 120 UTS714E12P................. P. 112 UTS714E12S................. P. 112 UTS714E15P................. P. 120 UTS714E15S................. P. 120 UTS714E18P................. P. 124 UTS714E18S................. P. 124 UTS714E19P................. P. 128 UTS714E19S................. P. 128 UTS714E5P.................. P. 72 UTS714E5S.................. P. 72 UTS714E7P.................. P. 88 UTS714E7S.................. P. 88 UTS71823P.................. P. 132 UTS71823S.................. P. 132 UTS71832P.................. P. 136 UTS71832S.................. P. 136 UTS7183G1SNPT.............. P. 56 UTS78D2P................... P. 20 UTS78D2P32................. P. 20 UTS78D2S................... P. 20 UTS78D2S32................. P. 20 UTS78D33P.................. P. 44 UTS78D33P32................ P. 44 UTS78D33S.................. P. 44 UTS78D33S32................ P. 44 UTS78D3AP.................. P. 40 UTS78D3AP32................ P. 40 UTS78D3AS.................. P. 40 UTS78D3AS32................ P. 40 UTS78D3P................... P. 36 UTS78D3P32................. P. 36 UTS78D3S................... P. 36 UTS78D3S32................. P. 36 UTS78D4P................... P. 60 UTS78D4P32................. P. 60 UTS78D4S................... P. 60 UTS78D4S32................. P. 60 UTS78D98P.................. P. 40 UTS78D98P32................ P. 40 UTS78D98S.................. P. 40 UTS78D98S32................ P. 40 UTS78E2P................... P. 20 UTS78E2S................... P. 20 UTS78E33P.................. P. 44 UTS78E33S.................. P. 44 UTS78E3AP.................. P. 40 UTS78E3AS.................. P. 40 UTS78E3P................... P. 36 UTS78E3S................... P. 36 UTS78E4P................... P. 60 UTS78E4S................... P. 60 UTS78E98P.................. P. 40 UTS78E98S.................. P. 40 UTS7GJC104P................ P. 68 UTS7GJC128P................ P. 96 UTS7GJC1412P............... P. 108 UTS7GJC147P................ P. 88 UTS7GN104P................. P. 68 UTS7GN128P................. P. 96 UTS7GN1412P................ P. 108 UTS7GN147P................. P. 88 Appendices 188 © 2011 – SOURIAU UTS Series Appendices Accessories 85005585A.................. P. 22 85005586A.................. P. 30 85005587A.................. P. 26 85005588A.................. P. 34 85005590A.................. P. 134 85005594................... P. 22 85005595................... P. 30 85005596................... P. 26 85005597................... P. 34 85005599................... P. 134 UT610CCRG.................. P. 30 UT610CCRR.................. P. 30 UT610CCRY.................. P. 30 UT612CCRG.................. P. 26 UT612CCRR.................. P. 26 UT612CCRY.................. P. 26 UT614CCRG.................. P. 34 UT614CCRR.................. P. 34 UT614CCRY.................. P. 34 UTFD11B.................... P. 22 UTFD12B.................... P. 30 UTFD13B.................... P. 26 UTFD14B.................... P. 34 UTFD16B.................... P. 134 UTS10DCG................... P. 30 UTS10DCGE.................. P. 30 UTS10DCGR.................. P. 30 UTS12DCG................... P. 26 UTS12DCGE.................. P. 26 UTS12DCGR.................. P. 26 UTS14DCG................... P. 34 UTS14DCGE.................. P. 34 UTS14DCGR.................. P. 34 UTS18DCG................... P. 134 UTS18DCGE.................. P. 134 UTS18DCGR.................. P. 134 UTS610DCG.................. P. 30 UTS612DCG.................. P. 26 UTS614DCG.................. P. 34 UTS618DCG.................. P. 134 UTS68C..................... P. 22 UTS710CCRG................. P. 30 UTS710CCRR................. P. 30 UTS710CCRY................. P. 30 UTS712CCRG................. P. 26 UTS712CCRR................. P. 26 UTS712CCRY................. P. 26 UTS714CCRG................. P. 34 UTS714CCRR................. P. 34 UTS714CCRY................. P. 34 UTS8DCG.................... P. 22 UTS8DCGE................... P. 22 UTS8DCGR................... P. 22 Contacts 82911456K.................. P. 145 82911457NK................. P. 145 82911458K.................. P. 145 82911459NK................. P. 145 82911460K.................. P. 145 82911461NK................. P. 145 82911462K.................. P. 145 82911463NK................. P. 145 82911464K.................. P. 145 82911465NK................. P. 145 82911466K.................. P. 145 82911467NK................. P. 145 82913600A.................. P. 145 82913601A.................. P. 145 82913602A.................. P. 145 82913603A.................. P. 145 82913604A.................. P. 145 82913605A.................. P. 145 82913606A.................. P. 145 82913607A.................. P. 145 82913608A.................. P. 145 82913609A.................. P. 145 RC14M30GE7K................ P. 146 RC14M30K................... P. 145 RC14M50GE7K................ P. 146 RC14M50K................... P. 145 RC16M23GE7K................ P. 146 RC16M23K................... P. 145 RC18W3K.................... P. 145 RC20M12E83K................ P. 148 RC20M12E84K................ P. 145 RC20M12E8K................. P. 145 RC20M12GE7K................ P. 146 RC20M12K................... P. 145 RC20M13GE7K................ P. 146 RC20M13K................... P. 145 RC20W3K.................... P. 145 RC24M9GE7K................. P. 146 RC24M9K.................... P. 145 RC24W3K.................... P. 145 RC28M1GE7K................. P. 146 RC28M1K.................... P. 145 RCDX6016D28................ P. 182 RCDX6019D28................ P. 182 RCDX6024D28................ P. 182 RCDX6026D28................ P. 182 RCDX602D28................. P. 181 RCDX6032D28................ P. 182 RCDX6036D28................ P. 182 RCDX6052D28................ P. 182 RCDXK1D28.................. P. 181 RCPOF1000B................. P. 150 RCW5016K................... P. 145 RCW50A7K................... P. 148 RM14M30GE1K................ P. 146 RM14M30K................... P. 145 RM14M50GE1K................ P. 146 RM14M50K................... P. 148 RM16M23GE1K................ P. 146 RM16M23K................... P. 145 RM18W3K.................... P. 145 RM20M12E83K................ P. 145 RM20M12E8K................. P. 145 RM20M12GE1k................ P. 146 RM20M12K................... P. 145 RM20M13GE1k................ P. 146 RM20M13K................... P. 145 RM20W3K.................... P. 145 RM24M9GE1k................. P. 146 RM24M9K.................... P. 145 RM24W3K.................... P. 145 RM28M1GE1k................. P. 146 RM28M1K.................... P. 145 RMDX6019D28................ P. 177 RMDX6024D28................ P. 176 RMDX6026D28................ P. 176 RMDX602D28................. P. 182 RMDX6031D28................ P. 179 RMDX6032D28................ P. 182 RMDX6036D28................ P. 182 RMDX6050D28................ P. 182 RMDXK10D28................. P. 178 RMPOF1000.................. P. 150 RMW5016K................... P. 148 RMW50A7K................... P. 148 SC14M1TK6.................. P. 145 SC14ML1TK6................. P. 145 SC16M11TK6................. P. 145 SC16M1TK6.................. P. 145 SC16ML11TK6................ P. 145 SC16ML1TK6................. P. 145 SC20M1TK6.................. P. 145 SC20ML1TK6................. P. 145 SC20W3TK6.................. P. 145 SC20WL3TK6................. P. 145 © 2011 – SOURIAU 189 UTS Series Appendices SC24M1TK6.................. P. 145 SC24ML1TK6................. P. 145 SC24W3TK6.................. P. 145 SC24WL3TK6................. P. 145 SM14M1TK6.................. P. 145 SM14ML1TK6................. P. 145 SM16M11TK6................. P. 145 SM16M1TK6.................. P. 145 SM16ML11TK6................ P. 145 SM16ML1TK6................. P. 145 SM20M1TK6.................. P. 145 SM20ML1TK6................. P. 145 SM20W3TK6.................. P. 145 SM20WL3TK6................. P. 145 SM24M1TK6.................. P. 145 SM24ML1TK6................. P. 145 SM24W3TK6.................. P. 145 SM24WL3TK6................. P. 145 Tooling 51060210924................ P. 155 51060210936................ P. 155 M10S1J..................... P. 178 M10SG8..................... P. 179 M317....................... P. 155 MH860...................... P. 155 MH86164G................... P. 155 MH86186.................... P. 155 RX2025GE1.................. P. 155 RX20D44.................... P.162 S16RCM14................... P. 155 S16RCM1450................. P. 155 S16RCM16................... P. 155 S16SCM20................... P. 155 S16SCML1................... P. 155 S16SCML11.................. P. 155 S20RCM..................... P. 155 S16SCM20................... P. 155 S20SCM20................... P. 155 S221....................... P. 180 S23D2...................... P. 180 S80........................ P. 179 S82........................ P. 182 S83........................ P. 179 S87........................ P. 182 S88........................ P. 182 SHANDLES................... P. 155 SL105...................... P. 179 sl46D2..................... P. 180 sl471...................... P. 180 UH25....................... P. 155 VGE10077A.................. P. 155 VGE10078A.................. P. 155 Appendices INDUTSCA07EN © Copyright SOURIAU June 2011 - All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notifi cation or public announcement. Any duplication is prohibited, unless approved in writing. www.souriau.com www.souriau-industrial.com contactindustry@souriau.com Tiva™ C Series TM4C1294 Connected LaunchPad Evaluation Kit EK-TM4C1294XL User's Guide Literature Number: SPMU365A March 2014–Revised March 2014 Contents 1 Board Overview ................................................................................................................... 4 1.1 Kit Contents................................................................................................................... 5 1.2 Using the Connected LaunchPad ......................................................................................... 5 1.3 Features....................................................................................................................... 5 1.4 BoosterPacks................................................................................................................. 6 1.5 Energīa........................................................................................................................ 6 1.6 Specifications................................................................................................................. 6 2 Hardware Description ........................................................................................................... 7 2.1 Functional Description ...................................................................................................... 7 2.1.1 Microcontroller....................................................................................................... 7 2.1.2 Ethernet Connectivity............................................................................................... 8 2.1.3 USB Connectivity ................................................................................................... 8 2.1.4 Motion Control....................................................................................................... 8 2.1.5 User Switches and LED's.......................................................................................... 8 2.1.6 BoosterPacks and Headers ....................................................................................... 9 2.2 Power Management........................................................................................................ 17 2.2.1 Power Supplies .................................................................................................... 17 2.2.2 Low Power Modes ................................................................................................ 18 2.2.3 Clocking ............................................................................................................ 18 2.2.4 Reset................................................................................................................ 18 2.3 Debug Interface............................................................................................................. 18 2.3.1 In-Circuit Debug Interface (ICDI) ................................................................................ 18 2.3.2 External Debugger ................................................................................................ 19 2.3.3 Virtual COM Port .................................................................................................. 19 3 Software Development ........................................................................................................ 20 3.1 Software Description....................................................................................................... 20 3.2 Source Code ................................................................................................................ 20 3.3 Tool Options ................................................................................................................ 20 3.4 Programming the Connected LaunchPad............................................................................... 21 4 References, PCB Layout, and Bill of Materials ....................................................................... 22 4.1 References .................................................................................................................. 22 4.2 Component Locations ..................................................................................................... 23 4.3 Bill of Materials ............................................................................................................. 24 5 Schematic ......................................................................................................................... 26 6 Revision History................................................................................................................. 27 2 Contents SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com List of Figures 1-1. Tiva C Series Connected LaunchPad Evaluation Board ............................................................... 4 2-1. Tiva Connected LaunchPad Evaluation Board Block Diagram ........................................................ 7 2-2. Default Jumper Locations ................................................................................................. 17 4-1. Connected LaunchPad Dimensions and Component Locations ..................................................... 23 List of Tables 1-1. EK-TM4C1294XL Specifications........................................................................................... 6 2-1. BoosterPack 1 GPIO and Signal Muxing ................................................................................. 9 2-2. BoosterPack 2 GPIO and Signal Muxing ............................................................................... 11 2-3. X11 Breadboard Adapter Odd-Numbered Pad GPIO and Signal Muxing .......................................... 13 2-4. X11 Breadboard Adapter Even-Numbered Pad GPIO and Signal Muxing ......................................... 15 4-1. Connected LaunchPad Bill of Materials ................................................................................. 24 6-1. Revision History ............................................................................................................ 27 SPMU365A–March 2014–Revised March 2014 List of Figures 3 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Chapter 1 SPMU365A–March 2014–Revised March 2014 Board Overview The Tiva™ C Series TM4C1294 Connected LaunchPad Evaluation Board (EK-TM4C1294XL) is a low-cost evaluation platform for ARM® Cortex™-M4F-based microcontrollers. The Connected LaunchPad design highlights the TM4C1294NCPDT microcontroller with its on-chip 10/100 Ethernet MAC and PHY, USB 2.0, hibernation module, motion control pulse-width modulation and a multitude of simultaneous serial connectivity. The Connected LaunchPad also features two user switches, four user LEDs, dedicated reset and wake switches, a breadboard expansion option and two independent BoosterPack XL expansion connectors. The pre-programmed quickstart application on the Connected LaunchPad also enables remote monitoring and control of the evaluation board from an internet browser anywhere in the world. The web interface is provided by 3rd party, Exosite. Each Connected LaunchPad is enabled on the Exosite platform allowing users to create and customize their own Internet-of-Things applications. Figure 1-1 shows a photo of the Connected LaunchPad with key features highlighted. Figure 1-1. Tiva C Series Connected LaunchPad Evaluation Board Tiva is a trademark of Texas Instruments. All other trademarks are the property of their respective owners. 4 Board Overview SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com Kit Contents 1.1 Kit Contents The Connected LaunchPad Evaluation Kit contains the following items: • Tiva™ C Series TM4C1294 Evaluation Board (EK-TM4C1294XL) • Retractable Ethernet cable • USB Micro-B plug to USB-A plug cable • README First document 1.2 Using the Connected LaunchPad The recommended steps for using the Connected LaunchPad Evaluation Kit are: 1. Follow the README First document included in the kit. The README First helps you get the Connected LaunchPad up and running in minutes. Within just a few minutes you can be controlling and monitoring the Connected LaunchPad through the internet using Exosite and the pre-programmed quickstart application. 2. Experiment with BoosterPacks. This evaluation kit conforms to the latest revision of the BoosterPack pinout standard. It has two independent BoosterPack connections to enable a multitude of expansion opportunities. 3. Take the first step towards developing your own applications. The Connected LaunchPad is supported by TivaWare for C Series. After installing TivaWare, look in the installation directory for examples\boards\ek-tm4c1294xl. You can find pre-configured example applications for this board as well as for this board with selected BoosterPacks. Alternately, use Energīa for a wiring frameworkbased cross-platform, fast-prototyping environment that works with this and other TI LaunchPads. See Chapter 3 of this document for more details about software development. TivaWare can be downloaded from the TI website at http://www.ti.com/tool/sw-tm4c. Energīa can be found at http://energia.nu. 4. Customize and integrate the hardware to suit your end application. This evaluation kit can be used as a reference for building your own custom circuits based on Tiva C microcontrollers or as a foundation for expansion with your custom BoosterPack or other circuit. This manual can serve as a starting point for this endeavor. 5. Get Trained. You can also download hours of written and video training materials on this and related LaunchPads. Visit the Tiva C Series LaunchPad Workshop Wiki for more information. 6. More Resources. See the TI MCU LaunchPad web page for more information and available BoosterPacks. (http://www.ti.com/tiva-c-launchpad) 1.3 Features Your Connected LaunchPad includes the following features: • Tiva TM4C1294NCPDTI microcontroller • Ethernet connectivity with fully integrated 10/100 Ethernet MAC and PHY Motion Control PWM • USB 2.0 Micro A/B connector • 4 user LEDs • 2 user buttons • 1 independent hibernate wake switch • 1 independent microcontroller reset switch • Jumper for selecting power source: – ICDI USB – USB Device – BoosterPack • Preloaded Internet-of-Things Exosite quickstart application • I/O brought to board edge for breadboard expansion • Two independent BoosterPack XL standard connectors featuring stackable headers to maximize expansion through BoosterPack ecosystem SPMU365A–March 2014–Revised March 2014 Board Overview 5 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated BoosterPacks www.ti.com – For a complete list of BoosterPacks, see the TI MCU LaunchPad web page: http://www.ti.com/launchpad 1.4 BoosterPacks The Connected LaunchPad provides an easy and inexpensive way to develop applications with the TM4C1294NCPDTI microcontroller. BoosterPacks are add-on boards that follow a pin-out standard created by Texas Instruments. The TI and third-party ecosystem of BoosterPacks greatly expands the peripherals and potential applications that you can easily explore with the Connected LaunchPad. You can also build your own BoosterPack by following the design guidelines on TI’s website. Texas Instruments even helps you promote your BoosterPack to other members of the community. TI offers a variety of avenues for you to reach potential customers with your solutions. 1.5 Energīa Energīa is an open-source electronics prototyping platform started in January of 2012 with the goal of bringing the Wiring and Arduino framework to the TI LaunchPad community. Energīa includes an integrated development environment (IDE) that is based on Processing. Together with Energīa, LaunchPads can be used to develop interactive objects, taking inputs from a variety of switches or sensors, and controlling a variety of lights, motors, and other physical outputs. LaunchPad projects can be stand-alone (only run on the target board, i.e. your LaunchPad), or they can communicate with software running on your computer (Host PC). Energīa projects are highly portable between supported LaunchPad platforms. Projects written for your Connected LaunchPad can be run on other LaunchPads with little or no modifications. More information is available at http://energia.nu. 1.6 Specifications Table 1-1 summarizes the specifications for the Connected LaunchPad. Table 1-1. EK-TM4C1294XL Specifications Parameter Value 4.75 VDC to 5.25 VDC from one of the following sources: • Debug USB U22 (ICDI) USB Micro-B cable connected to PC or other compatible power source. • Target USB (U7) USB Micro-B cable connected to PC or other compatible power Board Supply Voltage source. • BoosterPack 1 (X8-4) • BoosterPack 2 (X6-4) • Breadboard expansion header (X11-2 or X11-97). See schematic symbol JP1 for power input selection. Dimensions 4.9 in x 2.2 in x .425 in (12.45 cm x 5.59 cm x 10.8 mm) (L x W x H) • 5 VDC to BoosterPacks, current limited by TPS2052B. Nominal rating 1 Amp. Board input power supply limitations may also apply. Break-out Power Output • 3.3 VDC to BoosterPacks, limited by output of TPS73733 LDO. This 3.3-V plane is shared with on-board components. Total output power limit of TPS73733 is 1 Amp. RoHS Status Compliant 6 Board Overview SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Chapter 2 SPMU365A–March 2014–Revised March 2014 Hardware Description The Connected LaunchPad includes a TM4C1294NCPDTI microcontroller with an integrated 10/100 Ethernet MAC and PHY. This advanced ARM® Cortex™ M4F MCU has a wide range of peripherals that are made available to users via the on-board accessories and the BoosterPack connectors. This chapter explains how those peripherals operate and interface to the microcontroller. Figure 2-1 provides a high-level block diagram of the Connected LaunchPad. Figure 2-1. Tiva Connected LaunchPad Evaluation Board Block Diagram 2.1 Functional Description 2.1.1 Microcontroller The TM4C1294NCPDTI is a 32-bit ARM Cortex-M4F based microcontroller with 1024-kB Flash memory, 256-kB SRAM, 6-kB EEPROM, and 120 MHz operation; integrated 10/100 Ethernet MAC and PHY; integrated USB 2.0 connectivity with external high-speed USB 3.0 PHY capability; a hibernation module, a multitude of serial connectivity and motion control PWM; as well as a wide range of other peripherals. See the TM4C1294NCPDTI microcontroller data sheet for more complete details. Most of the microcontroller’s signals are routed to 0.1-in (2.54-mm) pitch headers or through-hole solder pads. An internal multiplexor allows different peripheral functions to be assigned to each of these GPIO pads. When adding external circuitry, consider the additional load on the evaluation board power rails. The TM4C1294NCPDTI microcontroller is factory-programmed with a quickstart demo program. The quickstart program resides in on-chip Flash memory and runs each time power is applied, unless the quickstart application has been replaced with a user program. The quickstart application automatically connects to http://ti.exosite.com when an internet connection is provided through the RJ45 Ethernet jack on the evaluation board. SPMU365A–March 2014–Revised March 2014 Hardware Description 7 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Functional Description www.ti.com 2.1.2 Ethernet Connectivity The Connected LaunchPad is designed to connect directly to an Ethernet network using RJ45 style connectors. The microcontroller contains a fully integrated Ethernet MAC and PHY. This integration creates a simple, elegant and cost-saving Ethernet circuit design. Example code is available for both the uIP and LwIP TCP/IP protocol stacks. The embedded Ethernet on this device can be programmed to act as an HTTP server, client or both. The design and integration of the circuit and microcontroller also enable users to synchronize events over the network using the IEEE1588 precision time protocol. When configured for Ethernet operation, it is recommended that the user configure LED D3 and D4 to be controlled by the Ethernet MAC to indicate connection and transmit/receive status. 2.1.3 USB Connectivity The Connected LaunchPad is designed to be USB 2.0 ready. A TPS2052B load switch is connected to and controlled by the microcontroller USB peripheral, which manages power to the USB micro A/B connector when functioning in a USB host. When functioning as a USB device, the entire Connected LaunchPad can be powered directly from the USB micro A/B connector. Use JP1 to select the desired power source. USB 2.0 functionality is provided and supported directly out of the box with the target USB micro A/B connector. High-speed USB 3.0 functionality can be enabled by adding an external USB PHY. The USB external PHY control and data signals are provided on the breadboard expansion header X11. 2.1.4 Motion Control The Connected LaunchPad includes the Tiva C Series Motion Control PWM technology, featuring a PWM module capable of generating eight PWM outputs. The PWM module provides a great deal of flexibility and can generate simple PWM signals – for example, those required by a simple charge pump – as well as paired PWM signals with dead-band delays, such as those required by a half-H bridge driver. Three generator blocks can also generate the full six channels of gate controls required by a 3-phase inverter bridge. A quadrature encoder interface (QEI) is also available to provide motion control feedback. See the BoosterPacks and Headers section of this document for details about the availability of these signals on the BoosterPack interfaces. 2.1.5 User Switches and LED's Two user switches are provided for input and control of the TM4C1294NCPDTI software. The switches are connected to GPIO pins PJ0 and PJ1. A reset switch and a wake switch are also provided. The reset switch initiates a system reset of the microcontroller whenever it is pressed and released. Pressing the reset switch also asserts the reset signal to the BoosterPack and Breadboard headers. The wake switch is one way to bring the device out of hibernate mode. Four user LEDs are provided on the board. D1 and D2 are connected to GPIOs PN1 and PN0. These LEDs are dedicated for use by the software application. D3 and D4 are connected to GPIOs PF4 and PF0, which can be controlled by user’s software or the integrated Ethernet module of the microcontroller. A power LED is also provided to indicate that 3.3 volt power is present on the board. 8 Hardware Description SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com Functional Description 2.1.6 BoosterPacks and Headers 2.1.6.1 BoosterPack 1 The Connected LaunchPad features two fully independent BoosterPack XL connectors. BoosterPack 1, located around the ICDI portion of the board, is fully compliant with the BoosterPack standard with the single exception of GPIO pin PA6 (X8-16), which does not provide analog capability. PA6 is located near the bottom of the inner left BoosterPack XL header. I2C is provided in both the original BoosterPack standard configuration as well as the updated standard location. Use of I2C on the bottom left of the BoosterPack connections per the updated standard is highly encouraged whenever possible. Motion control advanced PWM connections are provided on the inner right connector for motion control applications. Table 2-1 provides a complete listing of the BoosterPack pins and the GPIO alternate functions available on each pin. The TM4C1294NCPDTI GPIO register GPIOPCTL values are shown for each configuration. The headers in this table are labeled from left to right in ten pin columns. ‘A’ and ‘D’ make up the outer BoosterPack standard pins, ‘B’ and ‘C’ make up the inner BoosterPack XL standard pins. Table 2-1. BoosterPack 1 GPIO and Signal Muxing Standard MCU Digital Function (GPIOPCTL Bit Encoding) Header Pin Function GPIO Pin Analog 1 2 3 5 6 7 8 11 13 14 15 A1 1 +3.3 volts 3.3V A1 2 Analog PE4 123 AIN9 U1RI - - - - - - - - - SSI1XDAT0 A1 3 UART RX PC4 25 C1- U7Rx - - - - - - - - - EPI0S7 A1 4 UART TX PC5 24 C1+ U7Tx - - - - RTCCLK - - - - EPI0S6 A1 5 GPIO PC6 23 C0+ U5Rx - - - - - - - - - EPI0S5 A1 6 Analog PE5 124 AIN8 - - - - - - - - - - SSIXDAT1 A1 7 SPI CLK PD3 4 AIN12 - I2C8SDA T1CCP1 - - - - - - - SSI2CLk A1 8 GPIO PC7 22 C0- U5Tx - - - - - - - - - EPI0S4 A1 9 I2C SCL PB2 91 - - I2C0SCL T5CCP0 - - - - - - USB0STP EPI0S27 A1 10 I2C SDA PB3 92 - - I2C0SDA T5CCP1 - - - - - - USB0CLK EPI0S28 B1 1 +5 volts 5V B1 2 ground GND B1 3 Analog PE0 15 AIN3 U1RTS - - - - - - - - - - B1 4 Analog PE1 14 AIN2 U1DSR - - - - - - - - - - B1 5 Analog PE2 13 AIN1 U1DCD - - - - - - - - - - B1 6 Analog PE3 12 AIN0 U1DTR - - - - - - - - - - B1 7 Analog PD7 128 AIN4 U2CTS - T4CCP1 USB0PFLT - - NMI - - - SSI2XDAT2 B1 8 Analog PA6 40 - U2Rx I2C6SCL T3CCP0 USB0EPEN - - - - SSI0XDAT2 - EPI0S8 B1 9 A out PM4 74 TMPR3 U0CTS - T4CCP0 - - - - - - - - B1 10 A out PM5 73 TMPR2 U0DCD - T4CCP1 - - - - - - - - SPMU365A–March 2014–Revised March 2014 Hardware Description 9 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Functional Description www.ti.com Table 2-1. BoosterPack 1 GPIO and Signal Muxing (continued) Standard MCU Digital Function (GPIOPCTL Bit Encoding) Header Pin Function GPIO Pin Analog 1 2 3 5 6 7 8 11 13 14 15 C1 1 PWM PF1 43 - - - - EN0LED2 M0PWM1 - - - - SSI3XDAT0 TRD1 C1 2 PWM PF2 44 - - - - - M0PWM2 - - - - SSI3Fss TRD0 C1 3 PWM PF3 45 - - - - - M0PWM3 - - - - SSI3Clk TRCLK C1 4 PWM PG0 49 - - I2C1SCL - EN0PPS M0PWM4 - - - - - EPI0S11 C1 5 Capture PL4 85 - - - T0CCP0 - - - - - - USB0D4 EPI0S26 C1 6 Capture PL5 86 - - - T0CCP1 - - - - - - USB0D5 EPI0S33 C1 7 GPIO PL0 81 - - I2C2SDA - - M0FAULT3 - - - - USB0D0 EPI0S16 C1 8 GPIO PL1 82 - - I2C2SCL - - PhA0 - - - - USB0D1 EPI0S17 C1 9 GPIO PL2 83 - - - - C0o PhB0 - - - - USB0D2 EPI0S18 C1 10 GPIO PL3 84 - - - - C1o IDX0 - - - - USB0D3 EPI0S19 D1 1 ground GND D1 2 PWM PM3 75 - - - T3CCP1 - - - - - - - EPI0S12 D1 3 GPIO PH2 31 - U0DCD - - - - - - - - - EPI0S2 D1 4 GPIO PH3 32 - U0DSR - - - - - - - - - EPI0S3 D1 5 reset RESET D1 6 SPI MOSI PD1 2 AIN14 - I2C7SDA T0CCP1 C1o - - - - - - SSI2XDAT0 D1 7 SPI MISO PD0 1 AIN15 - I2C7SCL T0CCP0 C0o - - - - - - SSI2XDAT1 D1 8 GPIO PN2 109 - U1DCD U2RTS - - - - - - - - EPI0S29 D1 9 GPIO PN3 110 - U1DSR U2CTS - - - - - - - - EPI0S30 D1 10 GPIO PP2 103 - U0DTR - - - - - - - - USB0NXT EPI0S29 10 Hardware Description SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com Functional Description 2.1.6.2 BoosterPack 2 The second BoosterPack XL interface is located near the middle of the board. This interface is fully compliant with the BoosterPack standard, and adds features not covered by the BoosterPack standard that enable operation with additional BoosterPacks. An additional analog signal is provided on the outer left header (X6-9). This signal can be used to monitor the touch panel on the popular Kentec EB-LM4F120-L35 BoosterPack. Using the jumpers JP4 and JP5, Controller Area Network (CAN) digital receive and transmit signals can be optionally routed to the BoosterPack 2 interface. The location of these signals is consistent with the CAN interface on the Tiva C Series TM4C123G LaunchPad and the Stellaris LM4F120 LaunchPad. In the default configuration, UART0 is used for the ICDI virtual UART and CAN is not present on the BoosterPack headers. In this configuration, the ROM serial bootloader can be used over the ICDI virtual UART. When the jumpers are configured for CAN on the BoosterPack, then UART4 must be used for the ICDI virtual UART. To comply with both the original and the new BoosterPack standard, I2C is provided on both sides of the BoosterPack connection. Use of I2C on the bottom left of the BoosterPack connection is highly encouraged where possible, to be in compliance with the new BoosterPack standard. To provide I2C capability on the right side of the connector, per the original standard, two zero-ohm resistors (R19 and R20) are used to combine the SPI and I2C signals. These signals are not shared with any other pins on the LaunchPad and therefore removal of these zero-ohm resistors should not be required. Software should be certain that unused GPIO signals are configured as inputs. Table 2-2 provides a complete listing of the BoosterPack pins and the GPIO alternate functions available at each pin. The TM4C1294NCPDT GPIO register GPIOPCTL values are shown for each configuration. The headers in this table are labeled from left to right in ten pin columns. ‘A’ and ‘D’ make up the outer BoosterPack standard pins, ‘B’ and ‘C’ make up the inner BoosterPack XL standard pins. Table 2-2. BoosterPack 2 GPIO and Signal Muxing Standard MCU Digital Function (FPIOPCTL Bit Encoding) Header Pin Function GPIO Pin Analog 1 2 3 5 6 7 8 11 13 14 15 A2 1 3.3V A2 2 Analog PD2 3 AIN13 - I2C8SCL T1CCP0 C2o - - - - - - SSI2Fss A2 3 UART RX PP0 118 C2+ U6Rx - - - - - - - - - SSI3XDAT2 A2 4 UART TX PP1 119 C2- U6Tx - - - - - - - - - SSI3XDAT3 GPIO PD4 125 AIN7 U2Rx - T3CCP0 - - - - - - - SSI1XDAT2 A2 5 (See JP4) PA0 33 - U0Rx I2C9SCL T0CCP0 - - CANORx - - - - - Analog PD5 126 AIN6 U2Tx - T3CCP1 - - - - - - - SSI1XDAT3 A2 6 (See JP5) PA1 34 - U0Tx I2C9SDA T0CCP1 - - CAN0Tx - - - - - A2 7 SPI CLK PQ0 5 - - - - - - - - - - SSI3Clk EPI0S20 A2 8 GPIO PP4 105 - U3RTS U0DSR - - - - - - - USB0D7 - A2 9 I2C SCL PN5 112 - U1RI U3CTS I2C2SCL - - - - - - - EPIO0S35 A2 10 I2C SDA PN4 111 - U1DTR U3RTS I2C2SDA - - - - - - - EPIO0S34 B2 1 5V B2 2 GND B2 3 Analog PB4 121 AIN10 U0CTS I2C5SCL - - - - - - - - SSI1Fss SPMU365A–March 2014–Revised March 2014 Hardware Description 11 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Functional Description www.ti.com Table 2-2. BoosterPack 2 GPIO and Signal Muxing (continued) Standard MCU Digital Function (FPIOPCTL Bit Encoding) Header Pin Function GPIO Pin Analog 1 2 3 5 6 7 8 11 13 14 15 B2 4 Analog PB5 120 AIN11 U0RTS I2C5SDA - - - - - - - - SSI1Clk B2 5 Analog PK0 18 AIN16 U4Rx - - - - - - - - - EPI0S0 B2 6 Analog PK1 19 AIN17 U4Tx - - - - - - - - - EPI0S1 B2 7 Analog PK2 20 AIN18 U4RTS - - - - - - - - - EPI0S2 B2 8 Analog PK3 21 AIN19 u4CTS - - - - - - - - - EPI0S3 B2 9 A out PA4 37 - U3Rx I2C7SCL T2CCP0 - - - - - - - SSI0XDAT0 B2 10 A out PA5 38 - U3Tx I2C7SDA T2CCP1 - - - - - - - SSI0XDAT1 C2 1 PWM PG1 50 - - I2C1SDA - - M0PWM5 - - - - - EPI0S10 C2 2 PWM PK4 63 - - I2C3SCL - EN0LED0 M0PWM6 - - - - - EPI0S32 C2 3 PWM PK5 62 - - I2C3SDA - EN0LED2 M0PWM7 - - - - - EPI0S31 C2 4 PWM PM0 78 - - - T2CCP0 - - - - - - - EPI0S15 C2 5 Capture PM1 77 - - - T2CCP1 - - - - - - - EPI0S14 C2 6 Capture PM2 76 - - - T3CCP0 - - - - - - - EPI0S13 C2 7 GPIO PH0 29 - U0RTS - - - - - - - - - EPI0S0 C2 8 GPIO PH1 30 - U0CTS - - - - - - - - - EPI0S1 C2 9 GPIO PK6 61 - - I2C4SCL - EN0LED1 M0FAULT1 - - - - - EPI0S25 C2 10 GPIO PK7 60 - U0RI I2C4SDA - RTCCLK M0FAULT2 - - - - - EPI0S24 D2 1 GND D2 2 PWM PM7 71 TMPR0 U0RI - T5CCP1 - - - - - - - - D2 3 GPIO PP5 106 - U3CTS I2C2SDL - - - - - - - USB0D6 - D2 4 GPIO PA7 41 - U2Tx I2C6SDA T3CCP1 USB0PFLT - - - USB0EPEN SSI0XDAT3 - EPI0S9 D2 5 RESET SPI MOSI PQ2 11 - - - - - - - - - - SSI3XDAT0 EPI0S22 D2 6 I2C PA3 36 - U4Tx I2C8SDA T1CCP1 - - - - - - - SSI0Fss SPI MISO PQ3 27 - - - - - - - - - - SSI3XDAT1 EPI0S23 D2 7 I2C PA2 35 - U4Rx I2C8SCL T1CCP0 - - - - - - - SSI0Clk D2 8 GPIO PP3 104 - U1CTS U0DCD - - - - - - - USB0DIR EPI0S30 D2 9 GPIO PQ1 6 - - - - - - - - - - SSI3Fss EPI0S21 D2 10 GPIO PM6 72 TMPR1 U0DSR - T5CCP0 - - - - - - - - 12 Hardware Description SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com Functional Description 2.1.6.3 Breadboard Connection The breadboard adapter section of the board is a set of 98 holes on a 0.1 inch grid. Properly combined with a pair of right angle headers, the entire Connected LaunchPad can be plugged directly into a standard 300 mil (0.3 inch) wide solder-less breadboard. The right angle headers and breadboard are not provided with this kit. Suggested part numbers are Samtec TSW-149-09-L-S-RE and TSW-149-08-L-S-RA right angle pin headers and Twin industries TW-E40-1020 solder-less breadboard. Samtec TSW-149-09-F-S-RE and TSW-149-09-F-S-RA may be substituted. A detailed explanation of how to install the headers is available on the TI LaunchPad Wiki or at http://users.ece.utexas.edu/~valvano/EE345L/Labs/Fall2011/LM3S1968soldering.pdf. Nearly all microcontroller signals are made available at the breadboard adapter holes (X11). These signals are grouped by function where possible. For example, all EPI signals are grouped on one side of the connector. Many of the analog signals are grouped near VREF, and UART, SSI and I2C signals are grouped by peripheral to make expansion and customization simpler. Table 2-3 and Table 2-4 show the GPIO pin and signal muxing for the X11 breadboard adapter pads. Table 2-3. X11 Breadboard Adapter Odd-Numbered Pad GPIO and Signal Muxing MCU Digital Function (GPIOPCTL Bit Encoding) Pin Port PIN Analog 1 2 3 5 6 7 8 11 13 14 15 1 3V3 3 GND 5 PB4 121 AIN10 U0CTS I2C5SCL - - - - - - - - SSI1Fss 7 PB5 120 AIN11 U0RTS I2C5SDA - - - - - - - - SSI1Clk 9 PH0 29 - U0RTS - - - - - - - - - EPI0S0 11 PH1 30 - U0CTS - - - - - - - - - EPI0S1 13 PH2 31 - U0DCD - - - - - - - - - EPI0S2 15 PH3 32 - U0DSR - - - - - - - - - EPI0S3 17 PC7 22 C0- U5Tx - - - - - - - - - EPI0S4 19 PC6 23 C0+ U5Rx - - - - - - - - - EPI0S5 21 PC5 24 C1+ U7Tx - - - - RTCCLK - - - - EPI0S6 23 PC4 25 C1- U7Rx - - - - - - - - - EPI0S7 25 PA6 40 - U2Rx I2C6SCL T3CCP0 USB0EPEN - - - - SSI0XDAT2 - EPI0S8 27 PA7 41 - U2Tx I2C6SDA T3CCP1 USB0PFLT - - - USB0EPEN SSI0XDAT3 - EPI0S9 29 PG1 50 - - I2C1SDA - - M0PWM5 - - - - - EPI0S10 31 PG0 49 - - I2C1SCL - EN0PPS M0PWM4 - - - - - EPI0S11 33 PM3 75 - - - T3CCP1 - - - - - - - EPI0S12 35 GND 37 PM2 76 - - - T3CCP0 - - - - - - - EPI0S13 39 PM1 77 - - - T2CCP1 - - - - - - - EPI0S14 41 PM0 78 - - - T2CCP0 - - - - - - - EPI0S15 SPMU365A–March 2014–Revised March 2014 Hardware Description 13 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Functional Description www.ti.com Table 2-3. X11 Breadboard Adapter Odd-Numbered Pad GPIO and Signal Muxing (continued) MCU Digital Function (GPIOPCTL Bit Encoding) Pin Port PIN Analog 1 2 3 5 6 7 8 11 13 14 15 43 PL0 81 - - I2C2SDA - - M0FAULT3 - - - - USB0D0 EPI0S16 45 PL1 82 - - I2C2SCL - - PhA0 - - - - USB0D1 EPI0S17 47 PL2 83 - - - - C0o PhB0 - - - - USB0D2 EPI0S18 49 PL3 84 - - - - C1o IDX0 - - - - USB0D3 EPI0S19 51 PQ0 5 - - - - - - - - - - SSI3Clk EPI0S20 53 PQ1 6 - - - - - - - - - - SSI3Fss EPI0S21 55 PQ2 11 - - - - - - - - - - SSI3XDAT0 EPI0S22 57 PQ3 27 - - - - - - - - - - SSI3XDAT1 EPI0S23 59 PK7 60 - U0RI I2C4SDA - - - - - - EPI0S24 61 GND 63 PK6 61 - - I2C4SCL - EN0LED1 M0FAULT1 - - - - - EPI0S25 65 PL4 85 - - - T0CCP0 - - - - - - USB0D4 EPI0S26 67 PB2 91 - - I2C0SCL T5CCP0 - - - - - - USB0STP EPI0S27 69 PB3 92 - - I2C0SDA T5CCP1 - - - - - - USB0CLK EPI0S28 71 PP2 103 - U0DTR - - - - - - - - USB0NXT EPI0S29 73 PP3 104 - U1CTS U0DCD - - - RTCCLK - - - USB0DIR EPI0S30 75 PK5 62 - - I2C3SDA - EN0LED2 M0PWM7 - - - - - EPI0S31 77 PK4 63 - - I2C3SCL - EN0LED0 M0PWM6 - - - - - EPI0S32 79 PL5 86 - - - T0CCP1 - - - - - - USB0D5 EPI0S33 81 PN4 111 - U1DTR U3RTS I2C2SDA - - - - - - - EPI0S34 83 PN5 112 - U1RI U3CTS I2C2SCL - - - - - - - EPI0S35 85 PN0 107 - U1RTS - - - - - - - - - - 87 PN1 108 - U1CTS - - - - - - - - - - 89 PN2 109 - U1DCD U2RTS - - - - - - - - EPI0S29 91 PN3 110 - U1DSR U2CTS - - - - - - - - EPI0S30 93 PQ4 102 - U1Rx - - - - - DIVSCLK - - - - 95 WAKE 97 5V 14 Hardware Description SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com Functional Description Table 2-4. X11 Breadboard Adapter Even-Numbered Pad GPIO and Signal Muxing MCU Digital Function (GPIOPCTL Bit Encoding) Pin Port PIN Analog 1 2 3 5 6 7 8 11 13 14 15 2 5V 4 GND 6 PA2 35 - U4Rx I2C8SCL T1CCP0 - - - - - - - SSI0Clk 8 PA3 36 - U4Tx I2C8SDA T1CCP1 - - - - - - - SSI0Fss 10 PA4 37 - U3Rx I2C7SCL T2CCP0 - - - - - - - SSI0XDAT0 12 PA5 38 - U3Tx I2C7SDA T2CCP1 - - - - - - - SSI0XDAT1 14 PE0 15 AIN3 U1RTS - - - - - - - - - - 16 PE1 14 AIN2 U1DSR - - - - - - - - - - 18 PE2 13 AIN1 U1DCD - - - - - - - - - - 20 PE3 12 AIN0 U1DTR - - - - - - - - - - 22 PE4 123 AIN9 U1RI - - - - - - - - - SSI1XDAT0 24 PE5 124 AIN8 - - - - - - - - - - SSI1XDAT1 26 PK0 18 AIN16 U4Rx - - - - - - - - - EPI0S0 28 PK1 19 AIN17 U4Tx - - - - - - - - - EPI0S1 30 PK2 20 AIN18 U4RTS - - - - - - - - - EPI0S2 32 PK3 21 AIN19 U4CTS - - - - - - - - - EPI0S3 34 VREF 36 GND 38 PD5 126 AIN6 U2Tx - T3CCP1 - - - - - - - SSI1XDAT3 40 PD4 125 AIN7 U2Rx - T3CCP0 - - - - - - - SSI1XDAT2 42 PD7 128 AIN4 U2CTS - T4CCP1 USB0PFLT - - NMI - - - SSI1XDAT2 44 PD6 127 AIN5 U2RTS - T4CCP0 USB0EPEN - - - - - - SSI1XDAT3 46 PD3 4 AIN12 - I2C8SDA T1CCP1 - - - - - - - SSI2Clk 48 PD1 2 AIN14 - I2C7SDA T0CCP1 C1o - - - - - - SSI1XDAT0 50 PD0 1 AIN15 - I2C7SCL T0CCP0 C0o - - - - - - SSI1XDAT1 52 PD2 3 AIN13 - I2C8SCL T1CCP0 C2o - - - - - - SSI2Fss 54 PP0 118 C2+ U6Rx - - - - - - - - - SSI1XDAT2 56 PP1 119 C2- U6Tx - - - - - - - - - SSI1XDAT3 58 PB0 95 USB0ID U1Rx I2C5SCL T4CCP0 - - CAN1Rx - - - - - 60 PB1 96 USB0VBUS U1Tx I2C5SDA T4CCP1 - - CAN1Tx - - - - - 62 GND 64 PF4 46 - - - - EN0LED1 M0FAULT0 - - - - SSI3XDAT2 TRD3 66 PF0 42 - - - - EN0LED0 M0PWM0 - - - - SSI3XDAT1 TRD2 SPMU365A–March 2014–Revised March 2014 Hardware Description 15 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Functional Description www.ti.com Table 2-4. X11 Breadboard Adapter Even-Numbered Pad GPIO and Signal Muxing (continued) MCU Digital Function (GPIOPCTL Bit Encoding) Pin Port PIN Analog 1 2 3 5 6 7 8 11 13 14 15 68 PF1 43 - - - - EN0LED2 M0PWM1 - - - - SSI3XDAT0 TRD1 70 PF2 44 - - - - - M0PWM2 - - - - SSI3Fss TRD0 72 PF3 45 - - - - - M0PWM3 - - - - SSI3Clk TRCLK 74 PA0 33 - U0Rx I2C9SCL T0CCP0 - - CAN0Rx - - - - - 76 PA1 34 - U0Tx I2C9SDA T0CCP1 - - CAN0Tx - - - - - 78 PP4 105 - U3RTS U0DSR - - - - - - - USB0D7 - 80 PP5 106 - U3CTS I2C2SCL - - - - - - - USB0D6 - 82 PJ0 116 - U3Rx - - - - - - - - - 84 PJ1 117 - U3Tx - - - - - - - - - - 86 PM7 71 TMPR0 U0RI - T5CCP1 - - - - - - - - 88 PM6 72 TMPR1 U0DSR - T5CCP0 - - - - - - - - 90 PM5 73 TMPR2 U0DCD - T4CCP1 - - - - - - - - 92 PM4 74 TMPR3 U0CTS - T4CCP0 - - - - - - - - 94 RESET 96 GND 98 3V3 16 Hardware Description SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com Power Management 2.1.6.4 Other Headers and Jumpers JP1 is provided to select the power input source for the Connected LaunchPad. The top position is for BoosterPack power; this position also disconnects both USB voltages from the board’s primary 5-volt input. In the top position, the TPS2052B does not limit current so additional care should be exercised. The middle position draws power from the USB connector on the left side of the board near the Ethernet jack. The bottom position is the default, in which power is drawn from the ICDI (Debug) USB connection. JP2 separates the MCU 3.3-volt power domain from the rest of the 3.3-volt power on the board allowing an ammeter to be used to obtain more accurate measurements of microcontroller power consumption. JP3 isolates the output of the TPS73733 LDO from the board’s 3.3-V power domain. JP4 and JP5 are used to configure CAN signals to the BoosterPack 2 interface. In the default horizontal configuration, CAN is not present on the BoosterPack. UART 4 goes to the BoosterPack and UART 0 goes to the ICDI virtual serial port to provide ROM serial bootloader capability. In the vertical CAN-enabled configuration, UART 4 goes to the ICDI virtual serial port and CAN signals are available on the BoosterPack. The ROM serial bootloader is not available to the ICDI virtual serial port while the jumpers are in the CAN position. Figure 2-2 shows the default configuration and relative location of the jumpers on the board. Figure 2-2. Default Jumper Locations 2.2 Power Management 2.2.1 Power Supplies The Connected LaunchPad can be powered from three different input options: • On-board ICDI USB cable (Debug, Default) • Target USB cable • BoosterPack or Breadboard adapter connection The JP1 power-select jumper is used to select one of the power sources. In addition, the JP3 power jumper can be used to isolate the 3.3-volt output of the TPS73733 from the board’s 3.3-volt rail. A TPS2052B load switch is used to regulate and control power to the Target USB connector when the microcontroller is acting in USB host mode. This load switch also limits current to the BoosterPack and Breadboard adapter headers when the JP1 jumper is in the ICDI position. SPMU365A–March 2014–Revised March 2014 Hardware Description 17 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Power Management www.ti.com 2.2.2 Low Power Modes The Connected LaunchPad demonstrates several low power microcontroller modes. In run mode, the microcontroller can be clocked from several sources such as the internal precision oscillator or an external crystal oscillator. Either of these sources can then optionally drive an internal PLL to increase the effective frequency of the system up to 120 MHz. In this way, the run mode clock speed can be used to manage run mode current consumption. The microcontroller also provides sleep and deep sleep modes and internal voltage adjustments to the flash and SRAM to further refine power consumption when the processor is not in use but peripherals must remain active. Each peripheral can be individually clock gated in these modes so that current consumption by unused peripherals is minimized. A wide variety of conditions from internal and external sources can trigger a return to run mode. The lowest power setting of the microcontroller is hibernation, which requires a small amount of supporting external circuitry available on the Connected LaunchPad. The Connected LaunchPad can achieve microcontroller current consumption modes under 2 micro-Amps using hibernate VDD3ON mode. Hibernation with VDD3ON mode is not supported on this board. The Connected LaunchPad can be woken from hibernate by several triggers including the dedicated wake button, the reset button, an internal RTC timer and a subset of the device GPIO pins. The hibernation module provides a small area of internal SRAM that can preserve data through a hibernate cycle. 2.2.3 Clocking The Connected LaunchPad uses a 25 MHz crystal (Y1) to drive the main TM4C1294NCPDTI internal clock circuit. Most software examples use the internal PLL to multiply this clock to higher frequencies up to 120 MHz for core and peripheral timing. The 25-MHz crystal is required when using the integrated Ethernet MAC and PHY. The Hibernation module is clocked from an external 32.768-KHz crystal (Y3). 2.2.4 Reset The RESET signal to the TM4C1294NCPDTI microcontroller connects to the RESET switch, BoosterPack connectors, Breadboard adapter and to the ICDI circuit for a debugger-controller reset. External reset is asserted (active low) under the following conditions: • Power-on reset (filtered by and R-C network) • RESET switch is held down. • By the ICDI circuit when instructed by the debugger (this capability is optional, and may not be supported by all debuggers) • By an external circuit attached to the BoosterPack or Breadboard connectors. 2.3 Debug Interface 2.3.1 In-Circuit Debug Interface (ICDI) The Connected LaunchPad comes with an on-board ICDI. The ICDI allows for the programming and debugging of the TM4C1294NCPDTI using LM Flash Programmer and/or any of the supported tool chains. Note that ICDI only supports JTAG debugging at this time. It is possible to use other JTAG emulators instead of the on board ICDI, by connecting to U6. When the ICDI detects an external debug adapter connection on the JTAG connector U6 and disables the ICDI outputs to allow the external debug adapter to drive the debug circuit. For more information, see Section 2.3.2. Debug out of the ICDI is possible by removing resistors R6, R7, R8, R10, R11, R15, R16 and R40 from the Connected LaunchPad and use the ICDI to drive JTAG signals out on U6 for the purpose of programming or debugging other boards. To restore the connection to the on-board TM4C1294NCPDTI microcontroller, install jumpers from the odd to even pins of X1 or re-install the resistors. Removal of R40 disables the detection of an attached external debugger. R40 must be installed to use an external debug adapter to program or debug the Connected LaunchPad. 18 Hardware Description SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com Debug Interface 2.3.2 External Debugger The connector U6 is provided for the attachment of an external debug adapter such as the IAR J-Link or Keil ULINK. This connector follows the ARM standard 10-pin JTAG pinout. This interface can use either JTAG or SWD if supported by the external debug adapter. 2.3.3 Virtual COM Port When plugged into a USB host, the ICDI enumerates as both a debugger and a virtual COM port. JP4 and JP5 control the selection of which UART from the TM4C1294NCPDTI is connected to the virtual COM port. In the default configuration, UART0 maps to the virtual COM port of the ICDI. In the CAN jumper configuration, UART4 maps to the virtual COM port of the ICDI. SPMU365A–March 2014–Revised March 2014 Hardware Description 19 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Chapter 3 SPMU365A–March 2014–Revised March 2014 Software Development This chapter provides general information on software development as well as instructions for flash memory programming. 3.1 Software Description The TivaWare software provides drivers for all of the peripheral devices supplied in the design. The Tiva C Series Peripheral Driver Library is used to operate the on-chip peripherals as part of TivaWare. TivaWare includes a set of example applications that use the TivaWare Peripheral Driver Library. These applications demonstrate the capabilities of the TM4C1294NCPDTI microcontroller, as well as provide a starting point for the development of the final application for use on the Connected LaunchPad evaluation board. Example applications are also provided for the Connected LaunchPad when paired with selected BoosterPacks. 3.2 Source Code The complete source code including the source code installation instructions are provided at http://www.ti.com/tool/sw-tm4c. The source code and binary files are installed in the TivaWare software tree. 3.3 Tool Options The source code installation includes directories containing projects, makefiles, and binaries for the following tool-chains: • Keil ARM RealView® Microcontroller Development System • IAR Embedded Workbench for ARM • Sourcery Codebench • Generic GNU C Compiler • Texas Instruments' Code Composer Studio™ IDE Download evaluation versions of these tools from the Tools & Software section of www.ti.com/tiva. Due to code size restrictions, the evaluation tools may not build all example programs. A full license is necessary to re-build or debug all examples. For detailed information on using the tools, see the documentation included in the tool chain installation or visit the website of the tools supplier. 20 Software Development SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com Programming the Connected LaunchPad 3.4 Programming the Connected LaunchPad The Connected LaunchPad software package includes pre-built binaries for each of the example applications. If you installed the TivaWare™ software to the default installation path of C:\ti\TivaWare_C_Series_, you can find the example applications in C:\ti\TivaWare_C_Series- \examples\boards\ek-tm4c129xl. The on-board ICDI is used with the LM Flash Programmer tool to program applications on the Connected LaunchPad. Follow these steps to program example applications into the Connected LaunchPad evaulation board using the ICDI: 1. Install LM Flash Programmer on a PC running Microsoft Windows. 2. Place JP1 into the ICDI position on the Connected LaunchPad. 3. Connect the USB-A cable plug in to an available USB port on the PC and plug the Micro-B plug to the Debug USB port (U22) on the Connected LaunchPad. 4. Verify that LED D0 at the top of the board is illuminated. 5. Install Windows ICDI and Virtual COM Port drivers if prompted. Installation instructions can be found at http://www.ti.com/lit/pdf/spmu287. 6. Run the LM Flash Programmer application on the PC. 7. In the Configuration tap, use the Quick Set control to select “TM4C1294XL LaunchPad”. 8. Move to the Program tab and click the Browse button. Navigate to the example applications directory (the default location is C:\ti\TivaWare_C_Series_\examples\boards\ek-tm4c1294xl\) 9. Each example application has its own directory. Navigate to the example directory that you want to load and then into the sub-directory for one of the supported tool chains which contains the binary (*.bin) file. Select the binary file and click Open. 10. Set the Erase Method to Erase Necessary Pages, check the Verify After Program box, and check Reset MCU After Program. The example program starts execution once the verify process is complete. SPMU365A–March 2014–Revised March 2014 Software Development 21 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Chapter 4 SPMU365A–March 2014–Revised March 2014 References, PCB Layout, and Bill of Materials 4.1 References In addition to this document the following references are available for download at www.ti.com. • TivaWare for C Series (http://www.ti.com/tool/sw-tm4c) • TivaWare Peripheral Driver Library Users' Guide (literature number SPMU298) • EK-TM4C1294XL Getting Started Guide (literature number SPMZ858) • LM Flash Programmer Tool (http://www.ti.com/lmflashprogrammer) • TPS73733 Low-Dropout Regulator with Reverse Current Protection (http://www.ti.com/product/tps79733) • Texas Instruments Code Composer Studio website (http://www.ti.com/ccs) • Tiva C Series TM4C1294NCPDT Microcontroller Data Sheet (http://www.ti.com/lit/gpn/tm4c1294ncpdt) • Build Your Own BoosterPack information regarding the BoosterPack standard (http://www.ti.com/byob) • ICDI Driver Installation Guide (literature number SPMU287) Additional Support: • Keil RealView MDK-ARM (http://www.keil.com/arm/mdk.asp) • IAR Embedded Workbench for ARM (http://iar.com/ewarm/) • Sourcery CodeBench development tools (http://www.mentor.com/embedded-software/sourcerytools/ sourcery-codebench/overview) • Exosite (http://ti.exosite.com) 22 References, PCB Layout, and Bill of Materials SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com Component Locations 4.2 Component Locations Figure 4-1 is a dimensioned drawing of the Connected LaunchPad. This figure shows the location of selected features of the board as well as the component locations. Figure 4-1. Connected LaunchPad Dimensions and Component Locations SPMU365A–March 2014–Revised March 2014 References, PCB Layout, and Bill of Materials 23 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Bill of Materials www.ti.com 4.3 Bill of Materials Table 4-1 is the Connected LaunchPad bill of materials list. Table 4-1. Connected LaunchPad Bill of Materials Item Ref Qty Description Mfg Part Number 1 C1 1 Capacitor, 1000pF, 2kV, Kemet C1210C102MGRACTU 20%, X7R, 1210 C3, C4, C5, C10, C11, C12, C13, C16, C17, C18, C19, Capacitor, 0.1uF 16V, 2 C21, C22, C23, C24, C25, 26 10%,0402 X7R Taiyo Yuden EMK105B7104KV-F C26, C27, C28, C29, C30, C40, C41, C42, C43, C46 3 C31 1 Capacitor, 4700pF, 2kV, AVX 1812GC472KAT1A 10%,X7R, 1812 4 C32, C33 2 Capacitor, 3300pF, 50V, TDK C1608X7R1H332K 10%, X7R, 0603 5 C6, C14 2 Capacitor, 1uF , X5R, 10V, Johanson 100R07X105KV4T Low ESR, 0402 Dielectrics Inc 6 C7, C15, C20 3 Capacitor, 2.2uF, 16V, Murata GRM188R61C225KE15D 10%, 0603, X5R 7 C8, C9, C44, 6 Capacitor, 12pF, 50V, Murata GRM1555C1H120JZ01D C45, C47, C48 5%, 0402, COG 8 D0, D1, D2, D3, D4 5 Green LED 0603 Everlight 19-217/G7C-AL1M2B/3T J1, J2, J3, Jumper, 0.100, Gold, 3M 969102-0000-DA 9 J4, J5, J6, J7 7 Black, Open Kobiconn 151-8000-E Header, 2x3, 0.100, T-Hole, 10 JP1 1 Vertical Unshrouded, FCI 67996-206HLF 0.230 Mate, gold Header, 1x2, 0.100, T-Hole, 3M 961102-6404-AR 11 JP2, JP3 2 Vertical Unshrouded, 0.220 FCI 68001-102HLF Mate Anyone 1x2-head Header, 2x2, 0.100, T-Hole, FCI 67997-104HLF 12 JP4, JP5 2 Vertical Unshrouded, 0.230 Mate 4UCON 00998 13 R1, R2, R3, R4, 8 Resistor, 10k ohm, 1/10W, Yageo RC0402FR-0710KL R5, R29, R35, R44 5%, 0402 Thick Film 14 R17, R26, R36 3 100k 5% 0402 resistor smd Rohm MCR01MRTJ104 15 R18, R51 2 Resistor 0402 100 ohm 5% Rohm MCR1MRTJ101 16 R23, R21, R22, R24 4 Resistor 49.9 ohm 0402. 1 % Rohm MCR01MRTF49R9 17 R25 1 Resistor 4.87k 1% 0402 smd Rohm MCR01MRTF4871 18 R28 1 Resistor, 5.6k ohm, Panasonic ERJ-2GEJ562X 1/10W, 5%, 0402 19 R32, R43, R45, R46 4 resistor 75 ohm 0402 5% Rohm MCR01MRTJ750 20 R34, R52 2 Resistor, 1M OH, Panasonic ERJ-3GEYJ105V 1/10W, 5% 0603 SMD 21 R38 1 Resistor, 51 ohm, Panasonic ERJ-2GEJ510X 1/10W, 5%, 0402 22 R42 1 Resistor, 1M Ohm, Rohm MCR01MRTF1004 1/10W, 5%, 0402 23 R47 1 RES 1M OHM 5% 1206 TF Panasonic ERJ-8GEYJ105V 24 R49, R50 2 Resistor, 2.0k ohm, Panasonic ERJ-3GEYJ202V 1/10W, 5%, 0402 R6, R7, R8, R10, R11, Resistor, 0 ohm, 25 R15, R16, R19, R20, R39, 12 1/10W, 5%, 0402 Panasonic ERJ-2GE0R00X R40, R41 26 R9, R27, R30, R31, R33 5 Resistor, 330 ohm, Yageo RC0402FR-07330RL 1/10W, 5%, 0402 24 References, PCB Layout, and Bill of Materials SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated www.ti.com Bill of Materials Table 4-1. Connected LaunchPad Bill of Materials (continued) Item Ref Qty Description Mfg Part Number 27 RESET, USR_SW1, 4 Switch, Tact 6mm SMT, Omron B3S-1000 USR_SW2, WAKE 160gf Tiva, MCU TM4C1294NCPDT Texas Instruments TM4C1294NCPDT 28 U1 1 128 QFP with Ethernet MAC + PHY Texas Instruments XM4C1294NCPDT 29 U10 1 Transformer, ethernet, 1 to 1. Pulse Electronics HX1198FNL SOIC 16 30 U13 1 Diode, 8 chan, +/-15KV, ESD Semtech SLVU2.8-4.TBT Protection Array, SO-8 31 U14 1 Connector, RJ45 NO MAG, TE Connectivity 1-406541-5 shielded THRU HOLE 32 U2, U3 2 IC 4CH ESD SOLUTION Texas Instruments TPD4S012DRYR W/CLAMP 6SON 33 U20 1 Stellaris TIVA MCU Texas Instruments TM4C123GH6PMI TM4C123GH6PMI 34 U22 1 USB Micro B receptacle FCI 10118194-0001LF right angle with guides 35 U4 1 Fault protected power switch, Texas Instruments TPS2052BDRBR dual channel, 8-SON 36 U5 1 3.3V LDO TI TPS73733DRV Texas Instruments TPS73733DRV fixed out 5V in Samtec SHF-105-01-S-D-SM 37 U6 1 Header 2x5, 0.050, SM, Vertical Shrouded Don Connex C44-10BSA1-G Electronics USB Micro AB receptacle. 38 U7 1 Right angle with through Hirose ZX62D-AB-5P8 guides Samtec SSW-110-23-S-D 39 X6, X7, X8, X9 4 Header, 2x10, T-Hole Vertical unshrouded stacking Major League SSHQ-110-D-08-F-LF Electronics 40 Y1 1 Crystal 25 MHz 3.2 x 2.5 mm NDK nx3225ga-25.000m-std-crg-2 41 Y2 1 Crystal 16 MHz 3.2 x 2.5 mm NDK NX3225GA-16.000M-STD-CRG-2 4 pin 42 Y3 1 Crystal, 32.768 KHz Radial Citizen Finetech CMR200T-32.768KDZY-UT Can Miyota PCB Do Not Populate List (Shown for information only) 43 C2 1 Capacitor, 0.1uF 16V, Taiyo Yuden EMK105B7104KV-F 10%, 0402 X7R Screw, #4 x 0.625" Pan 44 H1, H4, H6 3 Head, Sheet Metal, McMaster 90077A112 Phillips/Slotted (for fan) 45 R12, R13, R14 3 Resistor, 5.6k ohm, Panasonic ERJ-2GEJ562X 1/10W, 5%, 0402 46 R48 1 Resistor 0402 1% 52.3k Rohm TRR01MZPF5232 TP1, TP2, TP3, TP4, TP5, 47 TP6, TP7, TP8, TP9, 17 Terminal, Test Point Miniature Keystone 5000 TP10, TP11, TP12, TP13, Loop, Red, T-Hole TP14, TP15, TP16, TP17 Header, 2x7, 0.100, T-Hole, 48 X1 1 Vertical, Unshrouded, 0.230 FCI 67997-114HLF Mate Valvano style bread board 49 X11A 1 connect. Right Angle Samtec TSW-149-09-F-S-RE extended, 1 x 49 0.100 pitch. 50 X11B 1 valvano style breadboard Samtec TSW-149-08-F-S-RA header. SPMU365A–March 2014–Revised March 2014 References, PCB Layout, and Bill of Materials 25 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated Chapter 5 SPMU365A–March 2014–Revised March 2014 Schematic This section contains the complete schematics for the Tiva C Series TM4C1294 Connected LaunchPad. • Microcontroller, USB, Buttons, and LED's • BoosterPack connectors • Breadboard connector • Ethernet and Ethernet LED's • Power • In-Circuit Debug Interface 26 Schematic SPMU365A–March 2014–Revised March 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated GND 330 GND GND SWITCH_TACTILE SWITCH_TACTILE GND 330 GND TPD4S012_DRY_6 GND GND 100 1M 3300pF TP4 TP5 TP6 TP7 D1 R33 USR_SW1 USR_SW2 D2 R27 D+ 1 D- 2 GND 4 ID 3 N.C. 5 VBUS 6 U2 R18 DM P2 DP P3 GND P5 ID P4 VBUS P1 TP14 TP15 TP16 TP17 PA0 P$33 PA1 P$34 PA2 P$35 PA3 P$36 PA4 P$37 PA5 P$38 PA6 P$40 PA7 P$41 PB0 P$95 PB1 P$96 PB2 P$91 PB3 P$92 PB4 P$121 PB5 P$120 PC0 P$100 PC1 P$99 PC2 P$98 PC3 P$97 PC4 P$25 PC5 P$24 PC6 P$23 PC7 P$22 PD0 P$1 PD1 P$2 PD2 P$3 PD3 P$4 PD4 P$125 PD5 P$126 PD6 P$127 PD7 P$128 PE0 P$15 PE1 P$14 PE2 P$13 PE3 P$12 PE4 P$123 PE5 P$124 PF0 P$42 PF1 P$43 PF2 P$44 PF3 P$45 PF4 P$46 PG0 P$49 PG1 P$50 PH0 P$29 PH1 P$30 PH2 P$31 PH3 P$32 PJ0 P$116 PJ1 P$117 PK0 P$18 PK1 P$19 PK2 P$20 PK3 P$21 PK4 P$63 PK5 P$62 PK6 P$61 PK7 P$60 PL0 P$81 PL1 P$82 PL2 P$83 PL3 P$84 PL4 P$85 PL5 P$86 PL6 P$94 PL7 P$93 PM0 P$78 PM1 P$77 PM2 P$76 PM3 P$75 PM4 P$74 PM5 P$73 PM6 P$72 PM7 P$71 PN0 P$107 PN1 P$108 PN2 P$109 PN3 P$110 PN4 P$111 PN5 P$112 PP0 P$118 PP1 P$119 PP2 P$103 PP3 P$104 PP4 P$105 PP5 P$106 PQ0 P$5 PQ1 P$6 PQ2 P$11 PQ3 P$27 PQ4 P$102 R52 C32 GPIO PA0 PA1 PA2 PA3 PA5 PA6 PA7 PA4 PB0 PB0/3.2C TARGET_VBUS/3.2C TARGET_VBUS/3.2C TARGET_VBUS/3.2C PB2 PB3 PB4 PB5 PC4 PC5 PC6 PC7 PD0 PD1 PD2 PD3 PD4 PD5 PD6 PD7 PF0 PF1 PF2 PF3 PF4 PE0 PE1 PE2 PE3 PE4 PE5 PG0 PG1 PH0 PH1 PH2 PJ0 PH3 PJ0/3.2D PJ1 PJ1/3.2D PK0 PK1 PK2 PK3 PK4 PK5 PK6 PK7 PL0 PL1 PL2 PL3 PL4 PL5 USBD_P USBD_P USBD_P USBD_N USBD_N USBD_N PM0 PM1 PM2 PM3 PM4 PM5 PM6 PM7 PP0 PP1 PP2 PP3 PP4 PP5 PN0 PN0/3.4D PN1 PN1/3.4D PN2 PN3 PN4 PN5 PQ0 PQ1 PQ2 PQ3 PQ4 TARGET_TCK/SWCLK/6.1A TARGET_TMS/SWDIO/6.1A TARGET_TDI/6.1E TARGET_TDO/SWO/6.1E TARGET_ID TARGET_ID A B C D E A B C D E 1 2 3 4 5 6 U7G$1 U1G$1 TM4C1294NCPDT See PF0 and PF4 for additional LED's used for Ethernet or user application NOTE: TPD4S012 all protection circuits are identical. Connections chosen for simple routing. convienence test points for ground TSW-110-02-S-D TSW-110-02-S-D TSW-110-02-S-D TSW-110-02-S-D 0 0 +3V3 +3V3 +5V +5V 0.1uF 0.1uF 0.1uF 0.1uF GND GND GND GND X6-1 X6-2 X6-3 X6-4 X6-5 X6-6 X6-7 X6-8 X6-9 X6-10 X6-11 X6-12 X6-13 X6-14 X6-15 X6-16 X6-17 X6-18 X6-19 X6-20 X7-1 X7-2 X7-3 X7-4 X7-5 X7-6 X7-7 X7-8 X7-9 X7-10 X7-11 X7-12 X7-13 X7-14 X7-15 X7-17 X7-16 X7-19 X7-18 X7-20 X8-1 X8-2 X8-3 X8-4 X8-5 X8-6 X8-7 X8-8 X8-9 X8-10 X8-11 X8-12 X8-13 X8-14 X8-15 X8-16 X8-17 X8-18 X8-19 X8-20 X9-1 X9-2 X9-3 X9-4 X9-5 X9-6 X9-7 X9-8 X9-9 X9-10 X9-11 X9-13 X9-12 X9-15 X9-14 X9-17 X9-16 X9-19 X9-18 X9-20 R19 R20 JP4 1 2 3 4 JP5 1 2 3 4 C23 C24 C25 C26 PB2 PB3 PL0 PP2 PH2 GND/1.6B GND/1.6B GND/1.6B GND/1.6B TARGET_RESET/3.2D TARGET_RESET/3.2D PA0/3.2C BP2_A2.5 BP2_A2.5 TARGET_RXD/6.1D TARGET_TXD/6.1D PA1/3.2C BP2_A2.6 BP2_A2.6 PE4 PE5 PC5 PC4 PM3 PM4 PM5 PL4 PD5/1.4B PC6 PD3 PC7 PE0 PE1 PE2 PE3 PD4/1.4B PD7 PF1 PF2 PF3 PG0 PL5 PL1 PL2 PL3 PH3 PD1 PD0 PN2 PN3 PD2 PP0 PP1 PQ0 PP4 PN5 PN4 PB4 PB5 PK0 PK1 PK2 PK3 PA4 PA5 PG1 PK4 PK5 PM0 PM1 PM2 PH0 PH1 PK6 PK7 PM7 PA7 PA3 PA2 PQ3 PQ2 PP3 PQ1 PM6 PP5 PA6 BoosterPack 2 Interface BoosterPack 1 Interface A B C D E A B C D E 1 2 3 4 5 6 JP4 and JP5 CAN and ICDI UART Selection: Populate Jumpers from 1-2 and 3-4 for Default Mode This enables ROM UART boot loader. UART 0 to ICDI Populate from 1-3 and 2-4 for controller area network on the boosterpack. UART2 is then availabe to ICDI. R19 and R20 can be populated to enable I2C on Right side of BP2 interface. This is for legacy support and the Sensor Hub BoosterPack. I2C and SSI are available on the corresponding BoosterPack 1 interface pins without modification to the board. PA6 and PA7 are also used by the onboard radio. Configure the radio to tri-state these GPIO before using them on the boosterpack interface. TSW-149-02-S-D +3V3 +3V3 +5V +5V 0.1uF 0.1uF 0.1uF 0.1uF GND GND GND GND X11-2 X11-1 X11-4 X11-3 X11-6 X11-5 X11-8 X11-7 X11-10 X11-9 X11-12 X11-11 X11-14 X11-13 X11-16 X11-15 X11-18 X11-17 X11-20 X11-19 X11-22 X11-21 X11-24 X11-23 X11-26 X11-25 X11-28 X11-27 X11-30 X11-29 X11-32 X11-31 X11-34 X11-33 X11-36 X11-35 X11-38 X11-37 X11-40 X11-39 X11-42 X11-41 X11-44 X11-43 X11-46 X11-45 X11-48 X11-47 X11-50 X11-49 X11-52 X11-51 X11-54 X11-53 X11-56 X11-55 X11-58 X11-57 X11-60 X11-59 X11-62 X11-61 X11-64 X11-63 X11-66 X11-65 X11-68 X11-67 X11-70 X11-69 X11-72 X11-71 X11-74 X11-73 X11-76 X11-75 X11-78 X11-77 X11-80 X11-79 X11-82 X11-81 X11-84 X11-83 X11-86 X11-85 X11-88 X11-87 X11-90 X11-89 X11-92 X11-91 X11-94 X11-93 X11-96 X11-95 X11-98 X11-97 C28 C27 C29 C30 VREF+/5.5B TARGET_RESET/2.4D GND/2.3C GND/2.3C GND/4.1A GND/2.3C GND/4.1A PB4 PB5 PH0 PH1 PH2 PH3 PC7 PC6 PC5 PC4 PA6 PA7 PG1 PM3 PM2 PM1 PM0 PL0 PL2 PL3 PQ0 PQ1 PK7 PK6 PL4 PB2 PB3 PP2 PP3 PK5 PK4 PL5 PN4 PN5 PG0 PL1 PQ2 PQ3 PN0 PN1 PN2 PN3 PQ4 WAKE/5.5A PA2 PA3 PA4 PA5 PE0 PE1 PE2 PE3 PE4 PE5 PK0 PK1 PK2 PK3 PD5 PD4 PD7 PD6 PD3 PD1 PD0 PD2 PP0 PP1 PB0 TARGET_VBUS/1.6B PF4 PF0 PF1 PF2 PF3 PA0 PA1 PP4 PP5 PJ0 PJ1 PM7 PM6 PM5 PM4 A B C D E A B C D E 1 2 3 4 5 6 NOTE: PB0 and PB1 are used in some configurations with 5V signals especially in USB Host or OTG mode. Be aware the 5V may be present on these pins depending on system jumper configuration These pins are only 5V tolerant when configured for USB mode applications. This is the breadboard connection header. Samtec TSW-149-08-F-S-RA and TSW-149-09-F-S-RE can be used together to create a breadboard connector see the Users Manual for more information. 49.9 49.9 49.4 49.9 330 GND 330 GND 0.1uF 0.1uF GND GND 0.1uF 0.1uF 75 75 GND GND 75 75 GND 4700pF 1M 1000pF R21 R22 R23 R24 D4 R30 D3 R31 C17 C16 C22 C18 P$1 P$1 P$2 P$2 P$3 P$3 P$6 P$6 P$7 P$7 P$8 P$8 P$9 P$9 P$10 P$10 P$11 P$11 P$14 P$14 P$15 P$15 P$16 P$16 P$1 1 P$2 2 P$3 3 P$4 4 P$5 5 P$6 6 P$7 7 P$8 8 R32 R43 CHASSIS 9 CHASSIS 10 RX+ 3 RX- 6 TERM1A 4 TERM1B 5 TERM2A 7 TERM2B 8 TX+ 1 TX- 2 R45 R46 C31 R47 C1 EN0RXI_N/5.3B EN0RXI_P/5.3B EN0TXO_N/5.3B EN0TXO_P/5.3B PF4/3.2C PF0/3.2C MCU_3V3/5.2A A B C D E A B C D E 1 2 3 4 5 6 U10 U13 U14 For Ethernet example Applications: LED4 is default configured as Ethernet Link OK LED3 is default configured as Ethernet TX/RX activity User may re-configure these pins / LED's for any application usage. Place pull up resistors and C16-C17 near TM4C MCU. Place C18 and C22 near pin 2 and pin 7 of U$10 U10 May be populated with either HX1188FNL or HX1198FNL. HX1198FNL preferred for best Ethernet performance. +3V3 +5V GND 0.1uF 2.2uF 0.1uF GND 330 GND 100k 4.87k 1% GND GND 0.1uF 1.0uF 2.2uF 0.1uF 0.1uF 0.1uF 0.1uF GND 0 0 GND 1M SWITCH_TACTILE 12pF 12pF 10k 0.1uF 12pF 12pF SWITCH_TACTILE GND MOUNT-HOLE3.2 MOUNT-HOLE3.2 GND GND GND GND GND TPS2052B_DRB_8 +5V 10k 100k GND 51 0.1uF GND +3V3 100k TPS73733_DRV_6 OMIT 2k MOUNT-HOLE3.2 100 CRYATL_32K_SMD C19 C20 C21 D0 R9 R17 TP3 R25 C4 C14 C15 C40 C41 C42 C43 TP9 TP10 TP11 TP12 R39 TP13 R41 R42 RESET C44 C45 NC2 P$2 NC4 P$4 OSC0 P$1 OSC1 P$3 R44 C46 C47 C48 WAKE H4 H6 *EN1 3 *EN2 4 *OC1 8 *OC2 5 EPAD 9 GND 1 IN 2 OUT1 7 OUT2 6 VIA V VIA V_2 VIA V_3 VIA V_4 VIA V_5 VIA V_6 U4 JP1 1 2 3 4 5 6 JP2 1 2 JP3 1 2 R35 R36 TP8 R38 C3 R26 EN 4 EPAD 7 GND 3 IN 6 NC 5 NR/FB 2 OUT 1 VIA V VIA V_2 U5 R48 R49 H1 R51 HIB P$65 RESET P$70 WAKE P$64 EN0RXIN P$53 EN0RXIP P$54 EN0TXON P$56 EN0TXOP P$57 GND P$17 GND P$48 GND P$55 GND P$58 GND P$80 GND P$114 GNDA P$10 OSC0 P$88 OSC1 P$89 RBIAS P$59 VBAT P$68 VDD P$7 VDD P$16 VDD P$26 VDD P$28 VDD P$39 VDD P$47 VDD P$51 VDD P$52 VDD P$69 VDD P$79 VDD P$90 VDD P$101 VDD P$113 VDD P$122 VDDA P$8 VDDC P$87 VDDC P$115 VREFA+ P$9 XOSC0 P$66 XOSC1 P$67 P$1 P$1 P$2 P$2 Y3 TARGET_VBUS/3.2C TARGET_VBUS/3.2C DEBUG_VBUS/6.4A EN0RXI_N EN0RXI_P EN0TXO_N EN0TXO_P RBIAS WAKE/3.3D MCU_3V3/6.2A MCU_3V3/4.1A VBUS VBUS VBUS PQ4/3.4D PD6/3.2B TARGET_RESET/3.2D A B C D E A B C D E 1 2 3 4 5 6 Y1 25Mhz U1G$2 Power Control Jumper: 1) To power from Debug install jumper on pins 5 - 6 2) To power from Target USB install jumper on pins 3 - 4 3) To power from BoosterPack 5V install jumper on pins 1 - 2 This is also the off position if BoosterPack does not supply power When powered from BoosterPack TPS2052B does not provide current limit protection. When powered by BoosterPack, USB host mode does not supply power to connected devices Primary 3.3V regulator Disconnect JP3 to power device from 3V3 BoosterPack JP2 can be used to measure MCU current consumption with a multi-meter. TPS2052B provides current limit for main 5V power. Also provides power switching for USB host/OTG modes For Host/OTG: PD6 configured as USB0EPEN peripheral function. PQ4 configure as individual pin interrupt. Indicates power fault on the USB bus. USB0PFLT peipheral pin not available due to pin mux and use on BoosterPacks. USB Host mode does not supply power to devices when powered from a BoosterPack For Applications that do not use USB: Configure PD6 as input with internal pull-down enabled. Turns off power to TARGET_VBUS R38 and C3 Used to meet VBAT rise time requirements R41 may be removed and precision reference applied to TP13 OMIT TSW-107-02-S-D OMIT +3V3 10k 0.1uF OMIT 0.1uF 1.0uF 12pF 12pF 0.1uF 0.1uF 0.1uF 0.1uF +3V3 +3V3 2.2uF 5.6k OMIT 5.6k OMIT 5.6k OMIT 10k 10k 10k 10k +3V3 0 0 0 0 0 0 0 GND GND GND GND GND GND GND GND GND GND GND GND 0 +3V3 TPD4S012_DRY_6 5.6k 10k GND 2k GND 1M 3300pF GND TRST 9 GND 3 NC 5 RESET 10 RTCK 7 TCK 4 TDI 8 TDO 6 TMS 2 VTREF 1 U21 X1-2 X1-1 X1-4 X1-3 X1-6 X1-5 X1-8 X1-7 X1-10 X1-9 X1-12 X1-11 X1-14 X1-13 R3 C2 C5 C6 C8 C9 C10 C11 C12 C13 NC2 P$2 NC4 P$4 OSC0 P$1 OSC1 P$3 C7 R12 R13 R14 R1 R2 R4 R5 TP2 TP1 R6 R7 R8 R10 R11 R15 R16 EXTDBG P3 RESET P10 GND P5 GND1 P9 P$7 P7 TCK P4 TDI P8 TDO P6 TMS P2 VTARGET P1 R40 HIB P$33 RESET P$38 WAKE P$32 GND0 P$12 GND1 P$27 GND2 P$39 GND3 P$55 GNDA P$3 GNDX P$35 OSC0 P$40 OSC1 P$41 PA0 P$17 PA1 P$18 PA2 P$19 PA3 P$20 PA4 P$21 PA5 P$22 PA6 P$23 PA7 P$24 PB0 P$45 PB1 P$46 PB2 P$47 PB3 P$48 PB4 P$58 PB5 P$57 PB6 P$1 PB7 P$4 PC0/TCK P$52 PC1/TMS P$51 PC2/TDI P$50 PC3/TDO P$49 PC4 P$16 PC5 P$15 PC6 P$14 PC7 P$13 PD0 P$61 PD1 P$62 PD2 P$63 PD3 P$64 PD4 P$43 PD5 P$44 PD6 P$53 PD7 P$10 PE0 P$9 PE1 P$8 PE2 P$7 PE3 P$6 PE4 P$59 PE5 P$60 PF0 P$28 PF1 P$29 PF2 P$30 PF3 P$31 PF4 P$5 VBAT P$37 VDD0 P$11 VDD1 P$26 VDD2 P$42 VDD3 P$54 VDDA P$2 VDDC0 P$25 VDDC1 P$56 XOSC0 P$34 XOSC1 P$36 DM P2 DP P3 GND P5 ID P4 VBUS P1 D+ 1 D- 2 GND 4 ID 3 N.C. 5 VBUS 6 U3 R28 R29 R50 R34 C33 ICDI_TDI ICDI_TMS ICDI_TMS ICDI_TCK ICDI_TCK ICDI_TDO ICDI_TDO ICDI_RESET ICDI_RESET VCP_RXD VCP_RXD VCP_RXD VCP_TXD VCP_TXD VCP_TXD DEBUG_PC1/TMS/SWDIO DEBUG_PC1/TMS/SWDIO DEBUG_PC1/TMS/SWDIO DEBUG_PC1/TMS/SWDIO DEBUG_PC1/TMS/SWDIO DEBUG_PC3/TDO/SWO DEBUG_PC3/TDO/SWO DEBUG_PC3/TDO/SWO DEBUG_PC3/TDO/SWO DEBUG_PC3/TDO/SWO DEBUG_PC2/TDI DEBUG_PC2/TDI DEBUG_PC2/TDI DEBUG_PC2/TDI DEBUG_RESET_OUT DEBUG_RESET_OUT DEBUG_RESET_OUT DEBUG_RESET_OUT EXTERNAL_DEBUG EXTERNAL_DEBUG ICDI_VDDC VERSION_1 VERSION_1 VERSION_2 VERSION_2 VERSION_0 VERSION_0 DEBUG_ACTIVE ICDI_USBD_N ICDI_USBD_N ICDI_USBD_P TARGET_TXD/2.5D ICDI_USBD_P TARGET_TXD/2.5D TARGET_RXD/2.5D TARGET_RXD/2.5D TARGET_TCK/SWCLK/1.2A TARGET_TCK/SWCLK/1.2A TARGET_TCK/SWCLK/1.2A TARGET_TMS/SWDIO/1.2B TARGET_TMS/SWDIO/1.2B TARGET_TMS/SWDIO/1.2B TARGET_TDI/1.2B TARGET_TDI/1.2B TARGET_TDO/SWO/1.2B TARGET_TDO/SWO/1.2B TARGET_RESET/5.2A TARGET_RESET/5.2A DEBUG_VBUS/5.1B DEBUG_VBUS/5.1B DEBUG_VBUS/5.1B DEBUG_PC0/TCK/SWCLK DEBUG_PC0/TCK/SWCLK DEBUG_PC0/TCK/SWCLK DEBUG_PC0/TCK/SWCLK DEBUG_PC0/TCK/SWCLK MCU_3V3/5.6B A B C D E A B C D E 1 2 3 4 5 6 Y2 16M U6 JTAG_ARM_10PIN U20 TM4C123GH6PMI TM4C123xH6PMI U22G$1 PE4 ETM_ENn Leave Open use GPIO Internal weak pullup. PE5 LS_PRESENTn Leave Open use GPIO internal weak pullup VERSION RESISTOR TABLE: *use internal GPIO weak pullups. ALL OMITTED: Legacy mode. (Stellaris ICDI) ALL POPULATED: Everything enabled Version 0 populated: UART CTS/RTS and Analog inputs JTAG PULL-UPS Jumpers to bridge from ICDI to Target portion of LaunchPad EXTERNAL_DEBUG pull low to use external debugger to debug the target. Causes ICDI chip to tri-state the JTAG lines Use this for JTAG IN from external debugger. See X1 jumpers for information about debug out to an external target. R40 must be removed for debug out. R40 must be instaled for debug in. X1 omitted by default To debug out from ICDI to off board MCU remove 0 ohm jumper resistors. To go back from debug out to debugging the target MCU install X1 and place jumpers on all pins. Chapter 6 SPMU365A–March 2014–Revised March 2014 Revision History This history highlights the changes made to the SPMU365 user's guide to make it an SPMU365A revision. Table 6-1. Revision History SEE ADDITIONS/MODIFICATIONS/DELETIONS Table 2-3, X11 Breadboard Adapter Odd-Numbered Pad GPIO and Signal Muxing: • Updated/Changed Pin 1 from "5V" to "3V3" • Updated/Changed Pin 25 from "PC4" to "PA6" Section 2.1.6.3 • Updated/Changed Pin 27 from "PA6" to "PA7" Breadboard Connection • Updated/Changed Pin 29 from "PA7" to "PG1" • Updated/Changed Pin 61 from "EPI0S12" to "GND" Table 2-4, X11 Breadboard Adapter Even-Numbered Pad GPIO and Signal Muxing: • Updated/Changed Pin 2 from "3V3" to "5V" SPMU365A–March 2014–Revised March 2014 Revision History 27 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2014, Texas Instruments Incorporated UTS Series Dynamic IP68/69K • UV Resistant • UL/IEC Compliant © 2011 – SOURIAU 3 How to read our catalogue ........................................ 06 UTS range overview ..................................................... 07 General technical characteristics ............................. 10 Cable assembly ............................................................... 14 2 contacts ....................................................................... 20 2 + ground contacts ................................................... 28 3 contacts ........................................................................ 36 3 + ground contacts .................................................... 52 4 contacts ........................................................................ 60 5 contacts ........................................................................ 72 6 contacts ........................................................................ 76 6 + ground contacts .................................................... 88 7 contacts ........................................................................ 92 8 contacts ........................................................................ 96 10 contacts ..................................................................... 104 12 contacts ...................................................................... 108 14 contacts ...................................................................... 116 15 contacts ...................................................................... 120 18 contacts ..................................................................... 124 19 contacts ..................................................................... 128 23 contacts ..................................................................... 132 32 contacts ..................................................................... 136 Contents UTS Series Overview Mechanics Description ...................................................................... 142 Contact plating selector guide .................................. 143 Contact selector guide ................................................ 144 Packaging ........................................................................ 144 Crimp contacts ............................................................... 145 #16 coaxial contacts ................................................... 147 PCB contacts .................................................................. 148 Fibre optic contacts ...................................................... 149 Contacts Tooling .............................................................................. 154 Assembly instruction .................................................... 156 Dimensions overmoulded harnesses ..................... 162 Extraction tools .............................................................. 162 Rated current & working voltage .............................. 163 UV resistance ................................................................. 164 UL94 + UL1977 ............................................................ 165 IEC 61984 with IP code explanation ...................... 168 What is NEMA rating ? ................................................ 170 Ethernet for the layman ............................................... 171 Technical information #16 coaxial contacts - cabling notices .................. 176 Glossary of terms .......................................................... 183 Discrimination/Keying methods ............................... 184 Part number Index.......................................................... 185 Appendices Appendices Technical information Contacts Mechanics Overview UTS Series © 2011 – SOURIAU 5 Overview UTS Series How to read our catalog .............................................................................................................. 06 UTS range overview ...................................................................................................................... 07 General technical characteristics .............................................................................................. 10 6 © 2011 – SOURIAU UTS Series Overview SOURIAU is pleased to announce the arrival of a brand new catalog containing some signifi cant improvements to simplify the connector selection process and provide easy access to key information. In this version you can see all layouts at a glance, download 2D drawings and 3D models. Then, when your choice is made, you can click on the part number and buy online. Step 3 Step 2 Easy access to supporting material such as prints and CAD models. In just two pages you can gather together details of all accessories, contacts, tools etc required for your application. Interactive zones. Clearer understanding of the range. Step 1 © 2011 – SOURIAU 7 UTS range overview The UTS series is a plastic connector range but rugged enough to withstand industrial applications. The philosophy of the UTS series is built around three key elements: Dynamic IP68/69K UV Resistant UL/IEC Compliant In most applications, our connectors are exposed to extreme climatic conditions; it was therefore key for us to select the materials best able to cope with the targeted environment. Part of our product qualifi cation process involved subjecting connectors to a simulated fi ve years of exposure to various elements including Temperature, UV and Humidity. The results were positive in that there were no visible signs of weakness, such as cracking or crazing. The outmost priority for any electrical installation is to protect personnel from any shock hazard. In North America, Underwriters Laboratories insisted that connector manufacturers, depending of the application, respect their standards. The UTS series had thus been qualifi ed and is certifi ed by this organisation. In Europe and in Asia, IEC standards are better known and trusted by end users. Like its American equivalent, the IEC refers to safety rules. The UTS series was obviously designed to respect these rules. UTS series is rated at IP68/69K… even in dynamic conditions. This means that it remain sealed even when used continuously underwater or cleaned using a high pressure hose and cable is moving. This extreme level of performance is achievable with jacketed cable or discrete wires. If this same level of performance is required even when connectors are not mated, we have UTS Hi Seal; a product designed to remain watertight if an environmental cap is not fi tted or if the equipment is likely to get wet when cables have been disconnected. Screw termination version UTS series is a wide range... Based on multiple power & signal connectors and offers everything from box mounted receptacles and cable mounted plugs to cable mounted in-line and PCB mounted receptacles. Almost all ways to accommodate wires exist: Crimp, Solder, Screw termination. UTS Series Overview The bayonet coupling system makes it simple to use. With only a 1/3 twist of the coupling ring, connectors are mated with an audible and sensitive “click”. Overview 8 © 2011 – SOURIAU Just screw the wires to the connector ! No special tools required, use a standard screwdriver UTS screw termination UTS range UTS discrete wire sealing See page 9 Sealed: IP68/69K UV resistant UL/IEC compliant Corrosion-proof Plastic housing UTS Series Plug Corrosion-proof Plastic housing UTS Hi seal Sealed Unmated Sealed unmated: IP68/69K MIL-C-26482 compatible UV resistant UL/IEC compliant Screw termination contact Solder contact Crimp contact • machined • stamped and formed • coaxial • fibre optics UTS Series Overview © 2011 – SOURIAU 9 overview Metal hold down clips - to lock the connector easily on the PCB and to release stress on solder joints - suitable for soldering in a metalised hole Pre-assembled PCB contacts - machined or stamped versions available - different solder tails lengths possible - different plating options Low profi le housing to limit space between panel and PCB Stand-offs to allow cleaning after soldering UTS PCB contacts Receptacle No fi ller plug needed Grommet Containment ring Backnut or Easy handling backshell UTS discrete wire sealing Double Sealing UTS Series Overview Overview 10 © 2011 – SOURIAU General technical Mechanical • Durability: 250 matings & unmatings per MIL-C-26482 • Vibration resistance (all UTS versions except UTS Screw termination contacts): Sinusoidal vibrations per CEI 60512-4 - from 10 to 2000 Hz • Thermal shock: 5 cycles 30 min. from -40°C to 105°C per MIL-STD1344 method 1003 Environmental • Operating temperature: from -40°C to +105°C 40/100/21 per NFF 61-030 • Flammability rating: UL94-V0 (all UTS except the Hi seal) - see page 165 UL94-HB (UTS Hi seal only) - see page 165 I2F3 according to NFF 16101 and NFF 16102 • Salt spray: 500 hours • UV resistant: No mechanical degradation or important variation of colour after 5 years of exposure in natural environment (equivalence exposure to sun and moisture as per ISO4892) • Sealing: - UTS Standard: IP68/IP69K (mated) - UTS Hi seal: IP68/IP69K (mated and unmated) - UTS Discrete wire sealing: IP67/69K (up to IP68 with easy handling backshell) - UTS Screw termination contacts: IP68/IP69K Note: IPx8: 10m underwater during 1 week • Fluid resistance: - Gasoil - Mineral oil - Acid bath - Basic bath 1 2 3 4 5 1 3 UTS Series Overview © 2011 – SOURIAU 11 characteristics Material • Body connector + Backshell: Thermoplastic • Insert: - UTS Standard, UTS Discrete wire sealing, UTS Screw termination contacts: Thermoplastic - UTS Hi seal handsolder & UTS Hi seal with PC tails contacts: Elastomer • Contacts: See page 140 • Nut: Metal • Halogen free • RoHS compliant & conform to the Chinese standard SJ/T1166-2006 (Chinese RoHS equivalent) • In accordance with: - UL 1977: Certifi cat ECBT2 File number: E169916 - CSA C22.2 n°182.3: Certifi cat ECBT8 File number: E169916 Electrical • See each layout page 1 2 4 5 UTS Series Overview Overview UTS Series © 2011 – SOURIAU 13 UTS Series Mechanics Cable assembly ................................................................................................. 14 2 contacts 8E2/8D2: 7A 32V ............................................................................................. 20 12E2/12D2: 16A 150V ............................................................................................ 24 2 contacts + ground 103: 16A 300V ............................................................................................ 28 142G1: 40A 300V ............................................................................................ 32 3 contacts 8E3/8D3: 7A 32V ............................................................................................. 36 8E3A/8E98 8D3A/8D98: 7A 50V ............................................................................................. 40 8E33/8D3.: 7A 50V ............................................................................................. 44 12E3/12D3: 16A 150V ............................................................................................ 48 3 contacts + ground 124 - 12E4/12D4: 16A 300V ............................................................................................ 52 183G1: 32A 300V ............................................................................................ 56 4 contacts 8E4/8D4: 7A 32V ............................................................................................. 60 102W2: 25A 150V ............................................................................................ 64 104: 13A 150V ............................................................................................ 68 5 contacts 14E5/14D5: 16A 150V ............................................................................................ 72 6 contacts 103W3: 5A 32V ............................................................................................. 76 106 - 10E6/10D6: 7A 32V ............................................................................................. 80 10E98/10D98: 7A 50V ............................................................................................. 84 6 contacts + ground 147 - 14E7: 16A 300V ............................................................................................ 88 7 contacts 10E7/10D7: 7A 50V ............................................................................................. 92 8 contacts 128: 10A 80V ............................................................................................. 96 12E8/12D8: 6A 32V ............................................................................................. 100 10 contacts 1210 - 12E10/12D10: 6A 50V ............................................................................................. 104 12 contacts 1412: 10A 63V ............................................................................................. 108 14E12/14D12: 4A 50V ............................................................................................. 112 14 contacts 12E14/12D14: 5A 32V ............................................................................................. 116 15 contacts 14E15/14D15: 4A 50V ............................................................................................. 120 18 contacts 14E18/14D18: 5A 50V ............................................................................................. 124 19 contacts 1419 - 14E19/14D19: 5A 32V ............................................................................................. 128 23 contacts 1823: 9A 63V ............................................................................................. 132 32 contacts 1832: 4A 32V ............................................................................................. 136 14 © 2011 – SOURIAU OUTDOOR (black outer jacket) INDOOR Cable assembly Souriau provides connectors in various applications for more than 90 years in the most extreme environment. Being conscious about the diffi culty to fi nd a quick and a reliable harness manufacturer, we decided years ago to start in house cable assembly production. It allows customers to reduce the number of suppliers, and to take advantage of the "best in class" quality of the Souriau group. Overmoulding is a process that further enhances the sealing properties of the UTS range, especially over many years of use. Overmoulding provides the opportunity to change the cable exit from straight through 90 degrees and avoid any stress on the cable terminated to the connector. Also, as the wires are encapsulated inside the moulding, a barrier is created which prevents from any liquid from entering the equipment through the connector if the cable jacket is breached. UV resistance Ambient temperature PVC PUR PTFE FEP SILICON TPE 70°C Static installation Static installation Static installation Static installation Static installation Static or dynamic installation Wet Cleaner, Immerged chlorine 90°C 180°C 205°C 260°C Chemical agression How to choose the outer jacket material UTS Series Mechanics © 2011 – SOURIAU 15 Overmolding description Discrete connector Overmoulded connector Compound Thermoplastic insert O ring Overmolding adapter PVC or PUR overmolding ...water ingress unhampered, leading to damage. ...prevents water ingress via capillary action. If cable jacket is breached... If cable jacket is breached... UTS Series Mechanics Mechanics 16 © 2011 – SOURIAU UTS Series Mechanics Harnesses Overmoulded harnesses, straight ending Connector type Number of ways Voltage Current UL Current IEC Harmonised cable part number* Part number (length: 1m.) Male Female UTS standard 2+PE 600 V 44 A 40 A HO5 VV - F 3Gg10 HAUTS0V142G1PST100 HAUTS0V142G1SST100 2+PE 500 V 10 A 16 A HO5 VV - F 3x1.5 HAUTS0V103PST100 HAUTS0V103SST100 3+PE 500 V 10 A 16 A HO5 VV - F 3G1.5 HAUTS0V103PEPST100 HAUTS0V103PESST100 3+PE 250 V 24 A 32 A HO5 VV - F 40G0.5 HAUTS0V183G1PST100 HAUTS0V183G1SST100 3+PE 500 V 10 A 16 A HO5 VV - F 4G1.5 HAUTS0V124PEPST100 HAUTS0V124PESST100 4 500 V 10 A 13 A HO5 VV - F 4x1.5 HAUTS0V104PST100 HAUTS0V104SST100 3 500 V 10 A 5 A HO5 VV - F 7G0.5 HAUTS0V103W3PST100 HAUTS0V103W3SST100 6 250 V 5 A 7 A HO5 VV - F 7x0.5 HAUTS0V106PST100 HAUTS0V106SST100 6+PE 500 V 10 A 16 A HO5 VV - F 7G1.5 HAUTS0V147PEPST100 HAUTS0V147PESST100 8 500 V 10 A 10 A HO5 VV - F 8x1.5 HAUTS0V128PST100 HAUTS0V128SST100 10 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V1210PST100 HAUTS0V1210SST100 12 500 V 10 A 10 A HO5 VV - F 12x1.5 HAUTS0V1412PST100 HAUTS0V1412SST100 19 250 V 5 A 5 A HO5 VV - F 21G0.5 HAUTS0V1419PST100 HAUTS0V1419SST100 23 500 V 10 A 9 A HO5 VV - F 25G1.5 HAUTS0V1823PST100 HAUTS0V1823SST100 32 250 V 5 A 4 A HO5 VV - F 40G0.5 HAUTS0V1832PST100 HAUTS0V1832SST100 UTS Hi seal 2 250 V 7 A 7 A H05 VV - F 2x0.5 HAUTS0V8E2PST100 HAUTS0V8E2SST100 2 650 V 13 A 16 A HO5 VV - F 2x1.5 HAUTS0V12E2PST100 HAUTS0V12E2SST100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E3PST100 HAUTS0V8E3SST100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E3APST100 HAUTS0V8E3ASST100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E33PST100 HAUTS0V8E33SST100 3 650 V 13 A 16 A HO5 VV - F 3x1.5 HAUTS0V12E3PST100 HAUTS0V12E3SST100 4 250 V 7 A 7 A HO5 VV - F 4x0.5 HAUTS0V8E4PST100 HAUTS0V8E4SST100 5 650 V 12 A 16 A HO5 VV - F 4G1.5 HAUTS0V14E5PST100 HAUTS0V14E5SST100 6 250 V 5 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E6PST100 HAUTS0V10E6SST100 6 250 V 6 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E98PST100 HAUTS0V10E98SST100 6+PE 500 V 10 A 16 A HO5 VV - F 7G1.5 HAUTS0V14E7PEPST100 HAUTS0V14E7PESST100 7 250 V 6 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E7PST100 HAUTS0V10E7SST100 8 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V12E8PST100 HAUTS0V12E8SST100 10 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V12E10PST100 HAUTS0V12E10SST100 12 250 V 5 A 4 A HO5 VV - F 12G0.5 HAUTS0V14E12PST100 HAUTS0V14E12SST100 14 250 V 5 A 5 A HO5 VV - F 14G0.5 HAUTS0V12E14PST100 HAUTS0V12E14SST100 15 650 V 12 A 4 A HO5 VV - F 18G0.5 HAUTS0V14E15PST100 HAUTS0V14E15SST100 18 250 V 4 A 4 A HO5 VV - F 18G0.5 HAUTS0V14E18PST100 HAUTS0V14E18SST100 19 250 V 4 A 5 A HO5 VV - F 40G0.5 HAUTS0V14E19PST100 HAUTS0V14E19SST100 * see page 18 3 m & 5 m version available on demand Eg: 3m HAUTS0V...300 5m HAUTS0V...500 © 2011 – SOURIAU 17 UTS Series Mechanics Harnesses Overmoulded harnesses, right angle ending Connector type Number of ways Voltage Current UL Current IEC Harmonised cable part number* Part number (length: 1m.) Male Female UTS standard 2+PE 600 V 44 A 40 A HO5 VV - F 3Gg10 HAUTS0V142G1PRA100 HAUTS0V142G1SRA100 2+PE 500 V 10 A 16 A HO5 VV - F 3x1.5 HAUTS0V103PRA100 HAUTS0V103SRA100 3+PE 500 V 10 A 16 A HO5 VV - F 3G1.5 HAUTS0V183G1PRA100 HAUTS0V183G1SRA100 3+PE 250 V 24 A 32 A HO5 VV - F 40G0.5 HAUTS0V183G1PRA100 HAUTS0V183G1SRA100 3+PE 500 V 10 A 16 A HO5 VV - F 4G1.5 HAUTS0V124PEPRA100 HAUTS0V124PESRA100 4 500 V 10 A 13 A HO5 VV - F 4x1.5 HAUTS0V104PRA100 HAUTS0V104SRA100 3 500 V 10 A 5 A HO5 VV - F 7G0.5 HAUTS0V103W3PRA100 HAUTS0V103W3SRA100 6 250 V 5 A 7 A HO5 VV - F 7x0.5 HAUTS0V106PRA100 HAUTS0V106SRA100 6+PE 500 V 10 A 16 A HO5 VV - F 7G1.5 HAUTS0V147PEPRA100 HAUTS0V147PESRA100 8 500 V 10 A 10 A HO5 VV - F 8x1.5 HAUTS0V128PRA100 HAUTS0V128SRA100 10 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V1210PRA100 HAUTS0V1210SRA100 12 500 V 10 A 10 A HO5 VV - F 12x1.5 HAUTS0V1412PRA100 HAUTS0V1412SRA100 19 250 V 5 A 5 A HO5 VV - F 21G0.5 HAUTS0V1419PRA100 HAUTS0V1419SRA100 23 500 V 10 A 9 A HO5 VV - F 25G1.5 HAUTS0V1823PRA100 HAUTS0V1823SRA100 32 250 V 5 A 4 A HO5 VV - F 40G0.5 HAUTS0V1832PRA100 HAUTS0V1832SRA100 UTS Hi seal 2 250 V 7 A 7 A H05 VV - F 2x0.5 HAUTS0V8E2PRA100 HAUTS0V8E2SRA100 2 650 V 13 A 16 A HO5 VV - F 2x1.5 HAUTS0V12E2PRA100 HAUTS0V12E2SRA100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E3PRA100 HAUTS0V8E3SRA100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E3APRA100 HAUTS0V8E3ASRA100 3 250 V 7 A 7 A HO5 VV - F 3x0.5 HAUTS0V8E33PRA100 HAUTS0V8E33SRA100 3 650 V 13 A 16 A HO5 VV - F 3x1.5 HAUTS0V12E3PRA100 HAUTS0V12E3SRA100 4 250 V 7 A 7 A HO5 VV - F 4x0.5 HAUTS0V8E4PRA100 HAUTS0V8E4SRA100 5 650 V 12 A 16 A HO5 VV - F 4G1.5 HAUTS0V14E5PRA100 HAUTS0V14E5SRA100 6 250 V 5 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E6PRA100 HAUTS0V10E6SRA100 6 250 V 6 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E98PRA100 HAUTS0V10E98SRA100 6+PE 500 V 10 A 16 A HO5 VV - F 7G1.5 HAUTS0V14E7PEPRA100 HAUTS0V14E7PESRA100 7 250 V 6 A 7 A HO5 VV - F 7x0.5 HAUTS0V10E7PRA100 HAUTS0V10E7SRA100 8 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V12E8PRA100 HAUTS0V12E8SRA100 10 250 V 5 A 6 A HO5 VV - F 10G0.5 HAUTS0V12E10PRA100 HAUTS0V12E10SRA100 12 250 V 5 A 4 A HO5 VV - F 12G0.5 HAUTS0V14E12PRA100 HAUTS0V14E12SRA100 14 250 V 5 A 5 A HO5 VV - F 14G0.5 HAUTS0V12E14PRA100 HAUTS0V12E14SRA100 15 650 V 12 A 4 A HO5 VV - F 18G0.5 HAUTS0V14E15PRA100 HAUTS0V14E15SRA100 18 250 V 4 A 4 A HO5 VV - F 18G0.5 HAUTS0V14E18PRA100 HAUTS0V14E18SRA100 19 250 V 4 A 5 A HO5 VV - F 40G0.5 HAUTS0V14E19PRA100 HAUTS0V14E19SRA100 * see page 18 3 m & 5 m version available on demand Eg: 3m HAUTS0V...300 5m HAUTS0V...500 Mechanics 18 © 2011 – SOURIAU UTS Series Mechanics Standardization of European cable - DIN VDE 0281/DIN VDE 0282/DIN VDE 0292 1. Basic type 2. Working voltage 3. Insulating 4. Sheathcladding material 5. Special features 6. Conductor types 7. Number of conductors 8. Protective conductor 9. Conductor crosssectional H: Harmonized Type 03: 300/300 V. V: PVC V: PVC H: Ribbon cable, separable U: Single wire X: Without protective conductor Area specifi ed in mm2 A: National Type 05: 300/500 V. R: Rubber R: Rubber H2: Ribbon cable non-separable R: Multi-wire G: With protective conductor 07: 450/750 V. S: Silicone Rubber N: Cloroprene Rubber K: Fine wire (permanently installed) J: Glass-fi lament braiding F: Fine wire (fl exible) T: Textile braiding H: Super fi ne wire Y: Tinsel strand 1 2 3 4 5 6 7 8 9 Harmonized wire coding system Example: Harmonized type, 300/500V, PVC insulating, PVC sheath- cladding, Fine wire, 3x1.5 cross-sectional: H05VVF3x1.5 Cable information Range of temperature: Occasional fl exing: -5°C up to +70°C Fixed installation: -40°C up to +80°C Rated voltage: U0/U: 300/500 V Wire section : Arrangement with #16 contact: wire section 1.5 mm² Arrangement with #20 contact: wire section 0.5 mm² Harmonized reference: H05 VVF XX © 2011 – SOURIAU 19 UTS Series Mechanics Standardization of American cable Nomenclature Key Defi nitions of Cable Types S: Service Grade (also means extra hard service when not followed by J, V, or P) J: Hard Service V: Vacuum cleaner cord (also light duty cable) P: Parallel cord (also known as zip cord) – Always light duty E: Thermoplastic Elastomer (UL/NEC designation ONLY) O: Oil Resistant* T: Thermoplastic W: Outdoor-includes sunlight resistant jacket and wet location rated conductors (formerly "W-A") H: Heater cable VW-1: Flame retardant FT2: Flame retardant SVT: Thermoplastic insulated vacuum cleaner cord, with or without 3rd conductor for grounding purposes; 300V. (PVC) SJT: Junior hard service, thermoplastic insulated conductors and jacket. 300V. (PVC) SJTW: Same as SJT except outdoor rated. (PVC) SJTO: Same as SJT but oil resistant outer jacket. (PVC) SJTOW: Same as SJTO except outdoor rated. (PVC) ST: Hard service cord with all thermoplastic construction, 600V. (PVC) STW: Same as ST except outdoor rated. (PVC) STO: Same as ST but with oil resistant outer jacket. (PVC) STOW: Same as STO except outdoor rated. (PVC) Mechanics 20 © 2011 – SOURIAU OR OR WITH Layout Specifi cations UTS Series 8E2/8D2 Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS08E2P UTS08E2S Plug Without (Fig.6) UTS68E2P UTS68E2S Cable gland (Fig.7) UTS6JC8E2P UTS6JC8E2S Jam nut receptacle Without (Fig.3) UTS78E2P UTS78E2S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS08D2P UTS08D2S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS78D2P32 UTS78D2S32 Jam nut receptacle with stand off and withouthold down clip Without (Fig.4) UTS78D2P UTS78D2S Sealed unmated © 2011 – SOURIAU 21 Dimensions Note: all dimensions are in mm UTS Series 8E2/8D2 Square fl ange receptacle - UTS0 Front view 11.7 11.7 20.7 Ø12 Ø12 15.3 2.4 2.4 Ø3.2 7.5 7.5 7.8 Fig. 1 Fig. 2 Jam nut receptacle - UTS7 Front view 24.2 24.2 18 Ø12 3.5 3.4 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø12 3.5 3.4 18 Ø12 3.5 3.4 Plug - UTS6 25.3 54 Fig. 7 Fig. 6 Ø22.5 Mated connector length 61.1 66.6 UTS7 UTS0 Drilling pattern 1.5 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 1.5 Panel cut out 15.3 15.3 Ø3.3 Square fl ange receptacle - UTS0 Jam nut receptacle - UTS7 13.7 14.6 Front mounting Ø12.5 Rear mounting Ø14.5 Mechanics 2 contacts 7A/32V per IEC 61984 22 © 2011 – SOURIAU Jam nut sealing caps Square fl ange sealing cap Plug protective cap Accessories Electrical characteristics UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 32V 1.5kV 3 UTS 8E2/8D2 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² 0 20 40 60 80 100 120 0 6 10 18 Current (A) Ambient Operating Temperature (°C) 12 14 16 2 4 8 Metal terminal IP40 Part number UTS8DCGE Part number UTS68C Metal terminal Part number UTS8DCG Part number UTS8DCGR UTS Series 8E2/8D2 Part numbers Receptacle cap Plug cap 85005585A 85005594 Plastic protective cap Part numbers / neoprene UTFD11B Gasket Current use Limited use Not recommended use © 2011 – SOURIAU 23 UTS Series 8E2/8D2 Mechanics 24 © 2011 – SOURIAU OR WITH OR Layout UTS Series 12E2/12D2 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS012E2P UTS012E2S Plug Without (Fig.6) UTS612E2P UTS612E2S Cable gland (Fig.7) UTS6JC12E2P UTS6JC12E2S Jam nut receptacle Without (Fig.3) UTS712E2P UTS712E2S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS012D2P UTS012D2S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS712D2P32 UTS712D2S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS712D2P UTS712D2S Sealed unmated © 2011 – SOURIAU 25 UTS Series 12E2/12D2 Dimensions Note: all dimensions are in mm 2 contacts 16A/150V per IEC 61984 Square fl ange receptacle - UTS0 Front view 11.7 11.7 26.4 Ø19 Ø19 20.8 2.4 2.4 Ø3.2 7.5 7.5 7.8 Fig. 1 Fig. 2 Plug - UTS6 Mated connector length 25.3 66.7 75.3 81.7 Fig. 7 Fig. 6 Ø30.1 UTS7 UTS0 Panel cut out Drilling pattern 20.8 15.3 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 2.3 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 2.3 1.4 Square fl ange receptacle - UTS0 22° Front mounting Ø18.3 Rear mounting Ø22.3 Jam nut receptacle - UTS7 Front view 27.2 31.9 18 18 18 Ø19 Ø19 Ø19 3.5 3.5 3.5 3 3 3 4.2 Fig. 3 Fig. 4 Fig. 5 Mechanics 26 © 2011 – SOURIAU Metal terminal UTS Series 12E2/12D2 Accessories Metal terminal 0 20 40 60 80 100 120 0 10 20 30 Current (A) Ambient Operating Temperature (°C) Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG G for Green Y for Yellow R for Red Plug sealing cap Square fl ange sealing cap Part number UTS612DCG Part number UTS12DCGE Jam nut sealing caps Part number UTS12DCG Part number UTS12DCGR Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket Electrical characteristics UL 13A 650V UL94 HB CSA 13A 650V UL94 HB IEC 16A 150V 2.5kV 3 UTS 12E2/12D2 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use © 2011 – SOURIAU 27 UTS Series 12E2/12D2 Mechanics 28 © 2011 – SOURIAU OR OR WITH Layout UTS Series 103 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 31 Free hanging receptacle Cable gland (Fig.1) UTS1JC103P UTS1JC103S Plug Without (Fig.2) UTS6103P UTS6103S Cable gland (Fig.3) UTS6JC103P UTS6JC103S PCB contacts supply separately see page 31 Jam nut receptacle Without (Fig.4) UTS7103P UTS7103S © 2011 – SOURIAU 29 UTS Series 103 Dimensions Note: all dimensions are in mm 2 + ground 16A/300V per IEC 61984 Free hanging - UTS1 70 Ø15.1 Fig. 1 Mated connector length - UTS7 77.3 Jam nut receptacle - UTS7 Fig. 4 18.3 12.3 27.2 22.5 Ø15.1 3.5 Panel cut out Drilling pattern Jam nut receptacle - UTS7 16.7 17.9 2.6 2.6 1.5 3 Plug - UTS6 Female Male Fig. 2 Fig. 3 33 63.2 25.3 Ø26.2 Ø26.2 Mechanics 30 © 2011 – SOURIAU UTS Series 103 Accessories and tooling Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J (1): example of plating, for other plating see UTS catalog page 143 Jam nut sealing caps Metal terminal Part number UTS10DCG Part number UTS10DCGR Plug sealing cap Part number UTS610DCG Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG G for Green Y for Yellow R for Red Handle Tool kit Part number TOOLKIT Part number SHANDLES © 2011 – SOURIAU 31 Contacts UTS Series 103 UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 16A 300V 4kV 3 Temperature elevation: 50°C Electrical characteristics UTS 103 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 120 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 2 + ground 16A/300V per IEC 61984 32 © 2011 – SOURIAU OR WITH OR UTS Series 142G1 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 35 Free hanging receptacle Cable gland (Fig.1) UTS1JC142G1P UTS1JC142G1S Plug Without (Fig.3) UTS6142G1P UTS6142G1S Cable gland (Fig.4) UTS6JC142G1P UTS6JC142G1S Jam nut receptacle Without (Fig.2) UTS7142G1P UTS7142G1S NPT threaded receptacle Without (Fig.5) UTS7142G1SNPT Layout © 2011 – SOURIAU 33 UTS Series 142G1 Dimensions Note: all dimensions are in mm Plug - UTS6 Female Male Fig. 3 Fig. 4 33 70 25.3 Ø31.5 Ø35.1 Free hanging - UTS1 70 Ø31.5 Fig. 1 Jam nut receptacle - UTS7 Fig. 2 18 1.6 35.1 30.4 Ø22.3 3.5 Panel cut out Jam nut receptacle - UTS7 24.5 25.9 Drilling pattern 3.6 3.6 2.1 4.2 NPT threaded receptacle - UTS7 Fig. 5 35.3 25.4 25.4 Ø22.3 23.1 Mechanics 2 + ground 40A/300V per IEC 61984 34 © 2011 – SOURIAU UTS Series 142G1 Accessories and tooling Jam nut sealing caps Metal terminal Part number UTS14DCG Part number UTS14DCGR Hand tool Part number M317 Positioner + locator setting Part number VGE10078A Extraction tool Part number 51060210936 Plug sealing cap Part number UTS614DCG Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG G for Green Y for Yellow R for Red © 2011 – SOURIAU 35 UL 44A 600V UL94 V-0 CSA 30A 600V UL94 V-0 IEC 40A 300V 4kV 3 Electrical characteristics UTS 142G1 derating curves Current use Limited use Not recommended use UTS Series 142G1 Test conditions Contact used: Machined contacts Wires used: 8.37mm² 0 20 40 60 80 100 120 0 10 15 20 25 30 35 40 45 50 Current (A) Ambient Operating Temperature (°C) 5 Contacts #8 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 16 82913601A(1) 82913600A(1) - 6.5 14 82913603A(1) 82913602A(1) - 12 82913605A(1) 82913604A(1) - 10 82913607A(1) 82913606A(1) - 8 82913609A(1) 82913608A(1) - (1): Example of plating, for other plating see page 143 Mechanics 2 + ground 40A/300V per IEC 61984 36 © 2011 – SOURIAU OR WITH OR UTS Series 8E3/8D3 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS08E3P UTS08E3S Plug Without (Fig.6) UTS68E3P UTS68E3S Cable gland (Fig.7) UTS6JC8E3P UTS6JC8E3S Jam nut receptacle Without (Fig.3) UTS78E3P UTS78E3S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS08D3P UTS08D3S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS78D3P32 UTS78D3S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS78D3P UTS78D3S Layout Sealed unmated © 2011 – SOURIAU 37 UTS Series 8E3/8D3 Dimensions Note: all dimensions are in mm 3 contacts 7A/32V per IEC 61984 Square fl ange receptacle - UTS0 Front view 11.7 11.7 20.7 Ø12 Ø12 15.3 2.4 2.4 Ø3.2 7.5 Fig. 1 Fig. 2 7.5 7.8 Plug - UTS6 25.3 54 Fig. 7 Fig. 6 Ø22.5 Mated connector length 61.1 66.6 UTS7 UTS0 Panel cut out Drilling pattern 15.3 15.3 Ø3.3 Jam nut receptacle - UTS7 13.7 14.6 1.6 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 1.6 1.9 0.9 Square fl ange receptacle - UTS0 Front mounting Ø12.5 Rear mounting Ø14.5 Jam nut receptacle - UTS7 Front view 24.2 24.2 18 Ø12 3.5 3.4 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø12 3.5 3.4 18 Ø12 3.5 3.4 Mechanics 38 © 2011 – SOURIAU UTS 8E3/8D3 derating curves UTS Series 8E3/8D3 Test conditions Contact used: Machined contacts Wires used: 0.518mm² 0 20 40 60 80 100 120 0 6 10 18 Current (A) Ambient Operating Temperature (°C) 12 14 16 2 4 8 Jam nut sealing caps Square fl ange sealing cap Plug protective cap Accessories Electrical characteristics Metal terminal IP40 Part number UTS8DCGE Part number UTS68C Metal terminal Part number UTS8DCG Part number UTS8DCGR Part numbers Receptacle cap Plug cap 85005585A 85005594 Plastic protective cap Part numbers / neoprene UTFD11B Gasket UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 32V 1.5kV 3 Current use Limited use Not recommended use © 2011 – SOURIAU 39 UTS Series 8E3/8D3 Mechanics 40 © 2011 – SOURIAU OR WITH OR UTS Series 8E3A/8E98 - 8D3A/8D98 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS08E3AP UTS08E3AS UTS08E98P UTS08E98S Plug Without (Fig.6) UTS68E3AP UTS68E3AS UTS68E98P UTS68E98S Cable gland (Fig.7) UTS6JC8E3AP UTS6JC8E3AS UTS6JC8E98P UTS6JC8E98S Jam nut receptacle Without (Fig.3) UTS78E3AP UTS78E3AS UTS78E98P UTS78E98S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS08D3AP UTS08D3AS UTS08D98P UTS08D98S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS78D3AP32 UTS78D3AS32 UTS78D98P32 UTS78D98S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS78D3AP UTS78D3AS UTS78D98P UTS78D98S Layout Sealed unmated © 2011 – SOURIAU 41 UTS Series 8E3A/8E98 - 8D3A/8D98 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 24.2 24.2 18 Ø12 3.5 3 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø12 3.5 3 18 Ø12 3.5 3 Square fl ange receptacle - UTS0 Front view 11.7 11.7 20.7 Ø12 Ø12 15.3 2.4 2.4 Ø3.2 7.5 Fig. 1 Fig. 2 7.5 7.8 Panel cut out Drilling pattern 15.3 15.3 Ø3.3 Jam nut receptacle - UTS7 13.7 14.6 1.6 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 1.6 1.9 0.9 Square fl ange receptacle - UTS0 Front mounting Ø12.5 Rear mounting Ø14.5 Plug - UTS6 Mated connector length 25.3 54 Fig. 7 Fig. 6 Ø22.5 66.6 UTS7 UTS0 61.1 Mechanics 3 contacts 7A/50V per IEC 61984 42 © 2011 – SOURIAU UTS Series 8E3A/8E98 - 8D3A/8D98 UTS 8E3A/98 - 8D3A/98 derating curves Jam nut sealing caps Square fl ange sealing cap Plug protective cap Accessories Electrical characteristics Metal terminal IP40 Part number UTS8DCGE Part number UTS68C Metal terminal Part number UTS8DCG Part number UTS8DCGR Part numbers Receptacle cap Plug cap 85005585A 85005594 Plastic protective cap Part numbers / neoprene UTFD11B Gasket UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 50V 1.5kV 3 Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 6 10 18 Current (A) Ambient Operating Temperature (°C) 12 14 16 2 4 8 Test conditions Contact used: Machined contacts Wires used: 0.518mm² © 2011 – SOURIAU 43 UTS Series 8E3A/8E98 - 8D3A/8D98 Mechanics 44 © 2011 – SOURIAU OR WITH OR UTS Series 8E33/8D33 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS08E33P UTS08E33S Plug Without (Fig.6) UTS68E33P UTS68E33S Cable gland (Fig.7) UTS6JC8E33P UTS6JC8E33S Jam nut receptacle Without (Fig.3) UTS78E33P UTS78E33S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS08D33P UTS08D33S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS78D33P32 UTS78D33S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS78D33P UTS78D33S Layout Sealed unmated © 2011 – SOURIAU 45 UTS Series 8E33/8D33 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 24.2 24.2 18 Ø12 3.5 3.4 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø12 3.5 3.4 18 Ø12 3.5 3.4 Square fl ange receptacle - UTS0 Front view 11.7 11.7 20.7 Ø12 Ø12 15.3 2.4 2.4 Ø3.2 7.5 Fig. 1 Fig. 2 7.5 7.8 Plug - UTS6 Mated connector length 25.3 54 61.1 66.6 Fig. 7 UTS7 Fig. 6 Ø22.5 UTS0 Panel cut out Drilling pattern 15.3 15.3 Ø3.3 Jam nut receptacle - UTS7 13.7 14.6 1.6 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 1.6 1.9 0.9 Square fl ange receptacle - UTS0 Front mounting Ø12.5 Rear mounting Ø14.5 Mechanics 3 contacts 7A/50V per IEC 61984 46 © 2011 – SOURIAU UTS Series 8E33/8D33 UTS 8E33/8D33 de-rating curves Jam nut sealing caps Square fl ange sealing cap Plug protective cap Accessories Electrical characteristics Metal terminal IP40 Part number UTS8DCGE Part number UTS68C Metal terminal Part number UTS8DCG Part number UTS8DCGR Part numbers Receptacle cap Plug cap 85005585A 85005594 Plastic protective cap Part numbers / neoprene UTFD11B Gasket UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² 0 20 40 60 80 100 120 0 6 10 18 Current (A) Ambient Operating Temperature (°C) 12 14 16 2 4 8 © 2011 – SOURIAU 47 UTS Series 8E33/8D33 Mechanics 48 © 2011 – SOURIAU UTS Series 12E3/12D3 OR WITH Specifi cations OR Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS012E3P UTS012E3S Plug Without (Fig.1) UTS612E3P UTS612E3S Cable gland (Fig.2) UTS6JC12E3P UTS6JC12E3S Jam nut receptacle Without (Fig.3) UTS712E3P UTS712E3S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS012D3P UTS012D3S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS712D3P32 UTS712D3S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS712D3P UTS712D3S Layout Sealed unmated © 2011 – SOURIAU 49 UTS Series 12E3/12D3 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 27.2 31.9 18 Ø19 3.5 3 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø19 3.5 3 18 Ø19 3.5 3 Plug - UTS6 Fig. 1 Fig. 2 66.7 Ø30.1 Ø30.1 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.7 Ø19 2.4 7.5 7.8 20.8 26.4 Ø3.2 Front view 75.3 81.7 UTS7 UTS0 Panel cut out Drilling pattern 20.8 20.8 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 2.3 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 2.3 2.8 1.4 Square fl ange receptacle - UTS0 22° Front mounting Ø18.3 Rear mounting Ø22.3 7 Mechanics 3 contacts 16A/150V per IEC 61984 50 © 2011 – SOURIAU UTS Series 12E3/12D3 Metal terminal Accessories Metal terminal Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG G for Green Y for Yellow R for Red Plug sealing cap Square fl ange sealing cap Part number UTS612DCG Part number UTS12DCGE Jam nut sealing caps Part number UTS12DCG Part number UTS12DCGR Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket Electrical characteristics UL 13A 650V UL94 HB CSA 13A 650V UL94 HB IEC 16A 150V 2.5kV 3 UTS 12E3/12D3 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 10 30 Current (A) Ambient Operating Temperature (°C) 20 © 2011 – SOURIAU 51 UTS Series 12E3/12D3 Mechanics 52 © 2011 – SOURIAU OR OR WITH OR UTS Series 124 - 12E4/12D4 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 55 Square fl ange receptacle Without (Fig.1) UTS0124P Jam nut receptacle Without (Fig.5) UTS7124P UTS7124S Free hanging receptacle Cable gland (Fig.13) UTS1JC124P UTS1JC124S Plug Without (Fig.11) UTS6124P UTS6124S Cable gland (Fig.12) UTS6JC124P UTS6JC124S Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.3) UTS012E4P UTS012E4S Jam nut receptacle Without (Fig.10) UTS712E4P UTS712E4S Plug Without (Fig.11) UTS612E4P UTS612E4S Plug Cable gland (Fig.12) UTS6JC12E4P UTS6JC12E4S Screw contacts loaded Jam nut receptacle Without (Fig.7 & 8) UTS7124PSCR UTS7124SSCR Plug Without (Fig.11) UTS6124PSCR UTS6124SSCR Cable gland (Fig.12) UTS6JC124PSCR UTS6JC124SSCR Free hanging receptacle Cable gland (Fig.13) UTS1JC124PSCR PCB contacts supply separately see page 55 Square fl ange receptacle Without (Fig.4) UTS0124P Jam nut receptacle Without (Fig.6) UTS7124P UTS7124S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS012D4P UTS012D4S Jam nut receptacle with stand off and without hold down clip Without (Fig.9) UTS712D4P UTS712D4S Jam nut receptacle with stand off and with hold down clips Without (Fig.9) UTS712D4P32 UTS712D4S32 Layout Sealed unmated © 2011 – SOURIAU 53 UTS Series 124 - 12E4/12D4 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Hold down clip Male Female Fig. 6 Fig. 8 Fig. 10 Front view Fig. 5 Fig. 7 Fig. 9 31.9 18 18 18 27.2 Ø19 Ø19 Ø19 3.5 3.5 3.5 2.4 2.4 4.2 3 Square fl ange receptacle - UTS0 11.7 11.7 11.7 Ø19 Ø19 Ø19 20.8 26.4 2.4 2.4 4 2.4 7.5 9.1 7.5 Ø3.2 Fig. 3 Fig. 4 Front view Fig. 2 Fig. 1 7.5 7.8 Free hanging - UTS1 / Plug - UTS6 Mated connector length 25.3 74 66.7 Fig. 13 Fig. 11 Fig. 12 Ø30.1 75.3 81.7 UTS7 UTS0 Panel cut out Drilling pattern 20.8 20.8 Front mounting Ø18.3 Ø3.3 Rear mounting Ø22.3 Jam nut receptacle - UTS7 21.4 22.7 3.1 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 3.1 3.1 3.1 Square fl ange receptacle - UTS0 22° Mechanics 3 + ground 16A/300V per IEC 61984 54 © 2011 – SOURIAU Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red UTS Series 124 - 12E4/12D4 Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS12DCG Part number UTS12DCGR Plug sealing cap Square fl ange sealing cap Part number UTS612DCG Part number UTS12DCGE Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket Color coding rings Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 55 UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 16A 300V 4kV 3 Temperature elevation: 50°C UTS Series 124 - 12E4/12D4 0 20 40 60 80 100 120 0 10 30 Current (A) Ambient Operating Temperature (°C) 20 18 15 13 28 25 23 8 5 3 Contacts Electrical characteristics UTS 124 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 3 + ground 16A/300V per IEC 61984 56 © 2011 – SOURIAU WITH Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 59 NPT threaded receptacle Without (Fig.1) UTS7183G1SNPT Plug Without (Fig.2) UTS6183G1P Plug Cable gland (Fig.3) UTS6JC183G1P Layout UTS Series 183G1 © 2011 – SOURIAU 57 Dimensions UTS Series 183G1 Note: all dimensions are in mm NPT threaded receptacle - UTS7 17.3 14.5 31.8 NPT - 3/4˝ Ø28.6 Ø19.6 Fig. 1 Plug - UTS6 Fig. 2 Fig. 3 37.5 81.3 Ø42 Ø42 Mated connector length - UTS6JC 90.5 Drilling pattern 5.1 5.1 5.1 5.1 Mechanics 3 + ground 32A/300V per IEC 61984 58 © 2011 – SOURIAU Accessories and tooling Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red UTS Series 183G1 Jam nut sealing caps Part number UTS14DCG Part number UTS14DCGR Hand tool Part number M317 Positioner + locator setting Part number VGE10078A Extraction tool Part number 51060210936 Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket Color coding rings Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG Plug sealing cap Part number UTS614DCG © 2011 – SOURIAU 59 UL 23A 600V UL94 V-0 CSA 23A 600V UL94 V-0 IEC 32A 300V 4kV 3 Electrical characteristics UTS 183G1 derating curves Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 8.37mm² UTS Series 183G1 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 50 Current (A) Ambient Operating Temperature (°C) Contacts #8 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 16 82913601A(1) 82913600A(1) - 6.5 14 82913603A(1) 82913602A(1) - 12 82913605A(1) 82913604A(1) - 10 82913607A(1) 82913606A(1) - 8 82913609A(1) 82913608A(1) - (1): Example of plating, for other plating see page 143 Mechanics 3 + ground 32A/300V per IEC 61984 60 © 2011 – SOURIAU OR OR WITH UTS Series 8E4/8D4 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.1) UTS08E4P UTS08E4S Plug Without (Fig.6) UTS68E4P UTS68E4S Cable gland (Fig.7) UTS6JC8E4P UTS6JC8E4S Jam nut receptacle Without (Fig.3) UTS78E4P UTS78E4S PCB contacts loaded Square fl ange receptacle Without (Fig.2) UTS08D4P UTS08D4S Jam nut receptacle with stand off and with hold down clips Without (Fig.5) UTS78D4P32 UTS78D4S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS78D4P UTS78D4S Layout Sealed unmated © 2011 – SOURIAU 61 UTS Series 8E4/8D4 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 24.2 24.2 18 Ø12 3.5 3.4 Fig. 3 Fig. 4 Fig. 5 18 4.2 Ø12 3.5 3.4 18 Ø12 3.5 3.4 Square fl ange receptacle - UTS0 Front view 11.7 11.7 20.7 Ø12 Ø12 15.3 2.4 2.4 Ø3.2 7.5 Fig. 1 Fig. 2 7.5 7.8 Plug - UTS6 Mated connector length 25.3 54 Fig. 7 Fig. 6 Ø22.5 61.1 66.6 UTS7 UTS0 Panel cut out Drilling pattern 15.3 15.3 Ø3.3 Jam nut receptacle - UTS7 13.7 14.6 1.4 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 1.4 1.4 1.4 Square fl ange receptacle - UTS0 Front mounting Ø12.5 Rear mounting Ø14.5 Mechanics 4 contacts 7A/32V per IEC 61984 62 © 2011 – SOURIAU UTS Series 8E4/8D4 UTS 8E4/8D4 derating curves Jam nut sealing caps Square fl ange sealing cap Plug protective cap Accessories Electrical characteristics Metal terminal IP40 Part number UTS8DCGE Part number UTS68C Metal terminal Part number UTS8DCG Part number UTS8DCGR Part numbers Receptacle cap Plug cap 85005585A 85005594 Plastic protective cap Part numbers / neoprene UTFD11B Gasket UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 32V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 16 18 Current (A) Ambient Operating Temperature (°C) © 2011 – SOURIAU 63 UTS Series 8E4/8D4 Mechanics 64 © 2011 – SOURIAU WITH UTS Series 102W2 (2x#12 + 2x#20) Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 67 Free hanging receptacle Cable gland (Fig.1) UTS1JC102W2P UTS1JC102W2S Plug Without (Fig.2) UTS6102W2P UTS6102W2S Plug Cable gland (Fig.3) UTS6JC102W2P UTS6JC102W2S Jam nut receptacle Without (Fig.4) UTS7102W2P UTS7102W2S Layout © 2011 – SOURIAU 65 UTS Series 102W2 (2x#12 + 2x#20) Dimensions Note: all dimensions are in mm Free hanging - UTS1 70 Ø15.1 Fig. 1 Plug - UTS6 Fig. 2 Male Fig. 2 Female Fig. 3 33 63.2 Ø26.2 Ø26.2 Ø26.2 25.3 Panel cut out Drilling pattern Jam nut receptacle - UTS7 16.7 17.9 3 3 3 3 Jam nut receptacle - UTS7 Mated connector length - UTS7 Fig. 4 18.3 27.2 22.5 Ø15.1 3.5 2.4 77.3 Mechanics 4 contacts 25A/150V per IEC 61984 66 © 2011 – SOURIAU UTS Series 102W2 (2x#12 + 2x#20) Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Jam nut sealing caps Part number UTS10DCG Part number UTS10DCGR Plug sealing cap Part number UTS610DCG Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket Color coding rings Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG Accessories and tooling Crimp tooling #20 Crimp tooling #12 Part number TOOLKIT Part number extraction tool 51060210924 (1): example of plating, for other plating see UTS catalog page 148 (2): contact reeled (3): loose contact Part number SHANDLES Contacts Contact size Part number of head RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RM RM/RC 20W3K(1) S20RM RM/RC 18W3K(1) S20RM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 Part number positioner + locator setting VGE10078A Part number hand tool M317 © 2011 – SOURIAU 67 UTS Series 102W2 (2x#12 + 2x#20) Contacts #20 Contact type AWG Part number Max insulator Ø Male Female Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) 1.58 22-20 RM20W3K(1) RC20W3K(1) 1.58 20-18 RM18W3K(1) RC18W3K(1) 2.1 stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) 0.89-1.58 26-24 SM24W3S26(2) SC24W3S25(2) 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) 1.17-2.08 22-20 SM20W3S26(2) SC20W3S25(2) 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 1) E l f l ti f th l ti #12 Crimp Machined 22 82911457NA 82911456A 4.9 20 82911459NA 82911458A 18 82911461NA 82911460A 16 82911463NA 82911462A 14 82911465NA 82911464A 12 82911467NA 82911466A UL 20A 500V UL94 V-0 CSA 18A 500V UL94 V-0 IEC 25A 150V 2.5kV 3 Temperature elevation: 50°C Electrical characteristics UTS 102W2 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 50 Current (A) Ambient Operating Temperature (°C) Mechanics 4 contacts 25A/150V per IEC 61984 68 © 2011 – SOURIAU OR OR OR WITH OR UTS Series 104 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contact supply separately see next page 71 Square fl ange receptacle Without (Fig.1) UTS0104P UTS0104S Free hanging receptacle Cable gland and grommet (Fig.2) UTS1GJC104P Free hanging receptacle Nut and grommet (Fig.3) UTS1GN104P Free hanging receptacle Cable gland (Fig.2) UTS1JC104P UTS1JC104S Plug Without (Fig.4) UTS6104P UTS6104S Plug Cable gland and grommet (Fig.5) UTS6GJC104S Plug Nut and grommet (Fig.6) UTS6GN104S Plug Cable gland (Fig.5) UTS6JC104P UTS6JC104S Jam nut receptacle Without (Fig.7) UTS7104P UTS7104S Jam nut receptacle Cable gland and grommet (Fig.9) UTS7GJC104P Jam nut receptacle Nut and grommet (Fig.8) UTS7GN104P Layout © 2011 – SOURIAU 69 UTS Series 104 Dimensions Note: all dimensions are in mm Square fl ange receptacle - UTS0 Free hanging - UTS1 11.5 70 40.9 Ø15.1 Ø15.1 20.8 24 2.4 10.5 Ø3.2 Fig. 1 Front view Fig. 3 Fig. 2 Plug - UTS6 Female Male Fig. 4 Fig. 5 Fig. 6 33 63.2 32.5 25.3 Ø26.2 Ø26.2 Ø26.2 Panel cut out Drilling pattern 18.5 18.5 Ø3.3 Jam nut receptacle - UTS7 16.7 17.9 3 3 3 3 Front mounting Ø15.2 Rear mounting Ø17.9 Square fl ange receptacle - UTS0 Jam nut receptacle - UTS7 Mated connector length Fig. 7 Fig. 9 Fig. 8 18.3 18.3 41 70.7 Ø15.1 Ø15.1 3.5 3.5 2.4 70.9 77.3 UTS7 UTS0 Mechanics 4 contacts 13A/150V per IEC 61984 70 © 2011 – SOURIAU UTS Series 104 Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS10DCG Part number UTS10DCGR Plug sealing cap Square fl ange sealing cap Part number UTS610DCG Part number UTS10DCGE Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket Color coding rings Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 71 UTS Series 104 Contacts UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 13A 150V 2.5kV 3 Electrical characteristics UTS 104 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 120 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 4 contacts 13A/150V per IEC 61984 72 © 2011 – SOURIAU OR WITH OR UTS Series 14E5/14D5 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS014E5P UTS014E5S Plug Without (Fig.1) UTS614E5P UTS614E5S Cable gland (Fig.2) UTS6JC14E5P UTS6JC14E5S Jam nut receptacle Without (Fig.3) UTS714E5P UTS714E5S PCB contacts loaded Square fl ange receptacle Without (Fig.6) UTS014D5P UTS014D5S Jam nut receptacle with hold down clips Without (Fig.4) UTS714D5P32 UTS714D5S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS714D5P UTS714D5S Layout Sealed unmated © 2011 – SOURIAU 73 UTS Series 14E5/14D5 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 30.4 35.1 18 Ø22.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø22.3 3.5 3 18 Ø22.3 3.5 3 Plug - UTS6 Fig. 1 Fig. 2 70 Ø35.1 Ø35.1 25.3 Mated connector length 75 82 Square fl ange receptacle - UTS0 Fig. 6 11.3 Ø22.3 2.3 7.5 7.8 23.2 28.8 Ø3.2 Front view UTS7 UTS0 Panel cut out Drilling pattern 23.2 23.2 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 4 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 2.3 3.7 0.6 2.5 22° Front mounting Ø21.5 Rear mounting Ø25.1 Square fl ange receptacle - UTS0 Mechanics 5 contacts 16A/150V per IEC 61984 74 © 2011 – SOURIAU UTS Series 14E5/14D5 UTS 14E5/14D5 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS614DCG Part number UTS14DCGE Metal terminal Part number UTS14DCG Part number UTS14DCGR Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket UL 12A 650V UL94 HB CSA 12A 650V UL94 HB IEC 16A 150V 2.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 1.31mm² 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 16 18 Current (A) Ambient Operating Temperature (°C) Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG G for Green Y for Yellow R for Red © 2011 – SOURIAU 75 UTS Series 14E5/14D5 Mechanics 76 © 2011 – SOURIAU UTS Series 103W3 (3x#16 + 3x#20) Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 79 Free hanging receptacle Cable gland (Fig.1) UTS1JC103W3P UTS1JC103W3S Plug Without (Fig.2) UTS6103W3P UTS6103W3S Plug Cable gland (Fig.3) UTS6JC103W3P UTS6JC103W3S Jam nut receptacle Without (Fig.4) UTS7103W3P UTS7103W3S PCB contacts supply separately see page 79 Jam nut receptacle with stand off and without hold down clip Without (Fig.4) UTS7103W3P UTS7103W3S OR WITH OR Layout © 2011 – SOURIAU 77 UTS Series 103W3 (3x#16 + 3x#20) Dimensions Note: all dimensions are in mm Plug - UTS6 Fig. 2 Male Fig. 2 Female Fig. 3 33 63.2 Ø26.2 Ø26.2 Ø26.2 25.3 Jam nut receptacle - UTS7 Mated connector length - UTS7 Fig. 4 18.3 27.2 22.5 Ø15.1 3.5 2.4 77.3 Panel cut out Drilling pattern 3 2.5 2.5 0.7 0.8 Jam nut receptacle - UTS7 16.7 17.9 Free hanging - UTS1 70 Ø15.1 Fig. 1 Mechanics 6 contacts 5A/32V per IEC 61984 78 © 2011 – SOURIAU UTS Series 103W3 (3x#16 + 3x#20) Accessories and tooling Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Jam nut sealing caps Part number UTS10DCG Part number UTS10DCGR Plug sealing cap Square fl ange sealing cap Part number UTS610DCG Part number UTS10DCGE Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket Color coding rings Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RCM RM/RC 20W3K(1) S20RCM RM/RC 18W3K(1) S20RCM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 (1): example of plating, for other plating see UTS catalog page 143 (2): contact reeled (3): loose contac © 2011 – SOURIAU 79 UTS Series 103W3 (3x#16 + 3x#20) UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 5A 32V 1.5kV 3 Temperature elevation: 50°C Electrical characteristics UTS 103W3 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² 0.518mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) Contacts 120 (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - plating L SM20ML1 #20 Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) - 1.58 22-20 RM20W3K(1) RC20W3K(1) - 1.58 20-18 RM18W3K(1) RC18W3K(1) - 2.1 Stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 26-24 SM24W3S26(2) SC24W3S25(2) - 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 22-20 SM20W3S26(2) SC20W3S25(2) - 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - - Mechanics 6 contacts 5A/32V per IEC 61984 80 © 2011 – SOURIAU UTS Series 106 - 10E6/10D6 Specifi cations OR OR WITH OR Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 83 Free hanging receptacle Cable gland (Fig.1) UTS1JC106P UTS1JC106S Plug Without (Fig.2) UTS6106P UTS6106S Plug Cable gland (Fig.3) UTS6JC106P UTS6JC106S Jam nut receptacle Without (Fig.4) UTS7106P UTS7106S Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.9) UTS010E6P UTS010E6S Plug Without (Fig.2) UTS610E6P UTS610E6S Cable gland (Fig.3) UTS6JC10E6P UTS6JC10E6S Jam nut receptacle Without (Fig.5) UTS710E6P UTS710E6S PCB contacts supply separately see page 83 Jam nut receptacle Without (Fig.4) UTS7106P UTS7106S PCB contacts loaded Square fl ange receptacle Without (Fig.8) UTS010D6P UTS010D6S Jam nut receptacle with stand off and with hold down clips Without (Fig.6) UTS710D6P32 UTS710D6S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.7) UTS710D6P UTS710D6S Layout Sealed unmated © 2011 – SOURIAU 81 UTS Series 106 - 10E6/10D6 Dimensions Note: all dimensions are in mm 6 contacts 7A/32V per IEC 61984 Free hanging - UTS1 70 Ø15.1 Fig. 1 Plug - UTS6 Female Male Fig. 2 Fig. 3 33 63.2 Ø26.2 Ø26.2 25.3 Jam nut receptacle - UTS7 Front view 22.5 27.2 18.3 Ø15.1 3.5 3 12.3 Fig. 5 Fig. 6 Fig. 7 Fig. 4 4.2 18.3 Ø15.1 3.5 3 18.3 Ø15.1 3.5 3 Panel cut out Drilling pattern 18.5 18.5 Ø3.3 Jam nut receptacle - UTS7 16.7 17.9 2.8 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 3.3 1.6 Square fl ange receptacle - UTS0 Front mounting Ø15.2 Rear mounting Ø17.9 Square fl ange receptacle - UTS0 Fig. 9 Fig. 8 11.7 Ø15.1 2.3 16.2 20.8 24 Ø3.2 Front view Mated connector length 70.9 77.3 UTS7 UTS0 7.5 Mechanics 82 © 2011 – SOURIAU UTS Series 106 - 10E6/10D6 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RM RM/RC 20W3K(1) S20RM RM/RC 18W3K(1) S20RM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 Jam nut sealing caps Part number UTS10DCG Part number UTS10DCGR Plug sealing cap Square fl ange sealing cap Part number UTS610DCG Part number UTS10DCGE Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket Color coding rings Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES (1): example of plating, for other plating see UTS catalog page 143 (2): contact reeled (3): loose contact Accessories and tooling Metal terminal © 2011 – SOURIAU 83 UTS Series 106 - 10E6/10D6 Contacts #20 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) - 1.58 22-20 RM20W3K(1) RC20W3K(1) - 1.58 20-18 RM18W3K(1) RC18W3K(1) - 2.1 stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 IEC 7A 32V 1.5kV 3 Electrical characteristics UTS 106 - 10E6/10D6 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 Current (A) Ambient Operating Temperature (°C) UTS 106 UL 5A 250V UL94 V-0 CSA 4A 250V UL94 V-0 UTS 10E6/10D6 UL 6A 250V UL94 HB CSA 6A 250V UL94 HB Mechanics 6 contacts 7A/32V per IEC 61984 84 © 2011 – SOURIAU OR WITH OR Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS010E98P UTS010E98S Plug Without (Fig.1) UTS610E98P UTS610E98S Cable gland (Fig.2) UTS6JC10E98P UTS6JC10E98S Jam nut receptacle Without (Fig.3) UTS710E98P UTS710E98S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS010D98P UTS010D98S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS710D98P32 UTS710D98S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS710D98P UTS710D98S Layout UTS Series 10E98/10D98 Sealed unmated © 2011 – SOURIAU 85 Dimensions Note: all dimensions are in mm UTS Series 10E98/10D98 Plug - UTS6 Fig. 1 Fig. 2 70 Ø26.2 Ø26.2 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 18.3 Ø15.1 2.3 16.2 20.8 24 Ø3.2 Front view 70.9 77.3 UTS7 UTS0 Drilling pattern 3.3 1.6 Ø13.5 Ø22 Ø17.7 Ø4 2.8 3.3 Panel cut out 18.5 18.5 Ø3.3 Jam nut receptacle - UTS7 16.7 17.9 Square fl ange receptacle - UTS0 Front mounting Ø15.2 Rear mounting Ø17.9 Jam nut receptacle - UTS7 Front view 22.4 27.2 18.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18.3 Ø15.1 3.5 3 18.3 Ø15.1 3.5 3 Ø15.1 7.5 30° Ø3.1 68° 22° Mechanics 6 contacts 7A/50V per IEC 61984 86 © 2011 – SOURIAU UTS Series 10E98/10D98 UTS 10E98/10D98 derating curves Jam nut sealing caps Plug protective cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS610DCG Part number UTS10DCGE Metal terminal Part number UTS10DCG Part number UTS10DCGR Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket UL 6A 250V UL94 HB CSA 6A 250V UL94 HB IEC 7A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 Current (A) Ambient Operating Temperature (°C) © 2011 – SOURIAU 87 UTS Series 10E98/10D98 Mechanics 88 © 2011 – SOURIAU OR OR WITH OR OR OR UTS Series 147 - 14E7/14D7 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 91 Square fl ange receptacle Without (Fig.2) UTS0147P Free hanging receptacle Cable gland and grommet (Fig.3) UTS1GJC147P Free hanging receptacle Nut and grommet (Fig.4) UTS1GN147P Free hanging receptacle Cable gland (Fig.3) UTS1JC147P UTS1JC147S Plug Without (Fig.5) UTS6147P UTS6147S Plug Cable gland and grommet (Fig.6) UTS6GJC147S Plug Nut and grommet (Fig.7) UTS6GN147S Plug Cable gland (Fig.6) UTS6JC147P UTS6JC147S Jam nut receptacle Without (Fig.8) UTS7147P UTS7147S Jam nut receptacle Cable gland and grommet (Fig.10) UTS7GJC147P Jam nut receptacle Nut and grommet (Fig.9) UTS7GN147P Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.2) UTS014E7P UTS014E7S Plug Cable gland (Fig.6) UTS6JC14E7P UTS6JC14E7S Jam nut receptacle Without (Fig.11) UTS714E7P UTS714E7S PCB contacts loaded Square fl ange receptacle Without (Fig.1) UTS014D7P UTS014D7S Jam nut receptacle with stand off and hold down clips Without (Fig.11) UTS714D7P32 UTS714D7S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.11) UTS714D7P UTS714D7S Jam nut receptacle With stand off and hold down clip (Fig.11) UTS7147PSEK9 Screw contacts loaded Jam nut receptacle Without (Fig.8) UTS7147PSCR UTS7147SSCR Free hanging receptacle Cable gland (Fig.3) UTS1JC147PSCR Plug Cable gland (Fig.6) UTS6JC147PSCR UTS6JC147SSCR Layout Sealed unmated © 2011 – SOURIAU 89 UTS Series 147 - 14E7/14D7 Dimensions Note: all dimensions are in mm Plug - UTS6 Female Male Fig. 5 Fig. 6 Fig. 7 33 70 32 23.5 Ø35.1 Ø35.1 Ø35.1 Jam nut receptacle - UTS7 Fig. 11 Fig. 10 Fig. 8 Fig. 9 18 18 49 70.7 Ø31.8 Ø22.3 3.5 3.5 1.6 4.2 3 Mated connector length 75 82 UTS7 UTS0 Drilling pattern 6.4 3.2 Ø13.5 Ø22 Ø17.7 Ø4 Ø3.1 5.2 Panel cut out 23.2 23.2 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 Square fl ange receptacle - UTS0 Front mounting Ø21.5 Rear mounting Ø25.1 Square fl ange receptacle - UTS0 Free hanging - UTS1 11.3 Ø22.3 23.2 28.8 2.3 29.1 22 Ø3.2 Fig. 2 Front view Fig. 1 78.5 43 Ø22.3 Fig. 4 Fig. 3 Mechanics 6 + ground 16A/300V per IEC 61984 90 © 2011 – SOURIAU UTS Series 147 - 14E7/14D7 Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS14DCG Part number UTS14DCGR Plug sealing cap Square fl ange sealing cap Part number UTS614DCG Part number UTS14DCGE Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket Color coding rings Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 91 Contacts #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 UTS Series 147 - 14E7/14D7 UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 16A 300V 4kV 3 Temperature elevation: 50°C Electrical characteristics UTS 147 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 120 0 5 3 8 10 20 18 15 13 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 6 + ground 16A/300V per IEC 61984 Mechanics 92 © 2011 – SOURIAU OR WITH OR UTS Series 10E7/10D7 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS010E7P UTS010E7S Plug Without (Fig.1) UTS610E7P UTS610E7S Cable gland (Fig.2) UTS6JC10E7P UTS6JC10E7S Jam nut receptacle Without (Fig.3) UTS710E7P UTS710E7S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS010D7P UTS010D7S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS710D7P32 UTS710D7S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS710D7P UTS710D7S Layout Sealed unmated © 2011 – SOURIAU 93 UTS Series 10E7/10D7 Dimensions Note: all dimensions are in mm Plug - UTS6 Fig. 1 Fig. 2 70 Ø26.2 Ø26.2 25.3 Jam nut receptacle - UTS7 Front view 22.4 27.2 18.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18.3 Ø15.1 3.5 3 18.3 Ø15.1 3.5 3 Ø15.1 Square fl ange receptacle - UTS0 Fig. 6 Fig. 7 11.7 Ø15.1 2.3 16.2 7.5 20.8 24 Ø3.2 Front view Mated connector length 70.9 77.3 UTS7 UTS0 Drilling pattern 2.8 Ø13.5 Ø22 Ø17.7 15° 15° Ø4 Ø3.1 3.3 1.6 Panel cut out 18.5 18.5 Ø3.3 Jam nut receptacle - UTS7 16.7 17.9 Square fl ange receptacle - UTS0 Front mounting Ø15.2 Rear mounting Ø17.9 Mechanics 7 contacts 7A/50V per IEC 61984 94 © 2011 – SOURIAU UTS Series 10E7/10D7 UTS 10E7/10D7 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS610DCG Part number UTS10DCGE Metal terminal Part number UTS10DCG Part number UTS10DCGR Part numbers Receptacle cap Plug cap 85005586A 85005595 Plastic protective cap Part numbers / neoprene UTFD12B Gasket UL 6A 250V UL94 HB CSA 6A 250V UL94 HB IEC 7A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 0 6 10 Current (A) Ambient Operating Temperature (°C) 12 14 2 4 8 © 2011 – SOURIAU 95 UTS Series 10E7/10D7 Mechanics 96 © 2011 – SOURIAU OR OR OR OR WITH OR UTS Series 128 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 99 Square fl ange receptacle Without (Fig.1) UTS0128P UTS0128S Free hanging receptacle Cable gland and grommet (Fig.2) UTS1GJC128P Free hanging receptacle Nut and grommet (Fig.3) UTS1GN128P Free hanging receptacle Cable gland (Fig.2) UTS1JC128P UTS1JC128S Plug Without (Fig.4) UTS6128P UTS6128S Plug Cable gland and grommet (Fig.5) UTS6GJC128S Plug Nut and grommet (Fig.6) UTS6GN128S Plug Cable gland (Fig.5) UTS6JC128P UTS6JC128S Jam nut receptacle Without (Fig.8) UTS7128P UTS7128S Jam nut receptacle Cable gland and grommet (Fig.10) UTS7GJC128P Jam nut receptacle Nut and grommet (Fig.9) UTS7GN128P PCB contacts loaded Jam nut receptacle With stand off and hold down clip (Fig.11) UTS7128PSEK9 Layout © 2011 – SOURIAU 97 UTS Series 128 Dimensions Note: all dimensions are in mm Square fl ange receptacle - UTS0 Free hanging - UTS1 11.7 Ø19.1 20.8 26.4 2.3 10.5 18.1 Ø3.2 Fig. 1 Front view 74.5 40.9 Ø19.1 Fig. 3 Fig. 2 Plug - UTS6 Female Male Fig. 4 Fig. 5 Fig. 6 33 65.7 33 25.3 Ø30.1 Ø30.1 Ø30.1 Drilling pattern 4.4 3.4 2 4.5 4 2.8 0.9 Panel cut out 20.8 20.8 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 Square fl ange receptacle - UTS0 Front mounting Ø18.3 Rear mounting Ø22.3 Mated connector length 75.3 81.7 UTS7 UTS0 Jam nut receptacle - UTS7 Fig. 11 Fig. 10 Fig. 8 Fig. 9 18 18 49.1 74.5 Ø19.1 Ø19.1 3.5 3.5 1.6 4.2 3 Mechanics 8 contacts 10A/80V per IEC 61984 98 © 2011 – SOURIAU UTS Series 128 Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS12DCG Part number UTS12DCGR Plug sealing cap Square fl ange sealing cap Part number UTS612DCG Part number UTS12DCGE Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket Color coding rings Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 99 UTS Series 128 Contacts UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 10A 80V 1.5kV 3 Electrical characteristics UTS 128 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 120 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 8 contacts 10A/80V per IEC 61984 100 © 2011 – SOURIAU OR WITH OR UTS Series 12E8/12D8 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS012E8P UTS012E8S Plug Without (Fig.1) UTS612E8P UTS612E8S Cable gland (Fig.2) UTS6JC12E8P UTS6JC12E8S Jam nut receptacle Without (Fig.3) UTS712E8P UTS712E8S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS012D8P UTS012D8S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS712D8P32 UTS712D8S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS712D8P UTS712D8S Layout Sealed unmated © 2011 – SOURIAU 101 UTS Series 12E8/12D8 Dimensions Note: all dimensions are in mm Plug - UTS6 Jam nut receptacle - UTS7 Front view 27.2 31.9 18 Ø19 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø19 3.5 3 18 Ø19 3.5 3.1 Fig. 1 Fig. 2 66.7 Ø30.1 Ø30.1 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.7 Ø19 2.4 7.5 7.8 20.8 26.4 Ø3.2 Front view 75.3 81.7 UTS7 UTS0 Panel cut out Drilling pattern 20.8 20.8 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 Square fl ange receptacle - UTS0 Front mounting Ø18.3 Rear mounting Ø22.3 4.3 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 3 1.6 3 4.3 1.1 3.9 22° Mechanics 8 contacts 6A/32V per IEC 61984 102 © 2011 – SOURIAU UTS Series 12E8/12D8 UTS 12E8/12D8 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS612DCG Part number UTS12DCGE Metal terminal Part number UTS12DCG Part number UTS12DCGR Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket UL 4.5A 250V UL94 HB CSA 4.5A 250V UL94 HB IEC 6A 32V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 Current (A) Ambient Operating Temperature (°C) © 2011 – SOURIAU 103 UTS Series 12E8/12D8 Mechanics 104 © 2011 – SOURIAU OR OR WITH OR UTS Series 1210 - 12E10/12D10 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page107 Free hanging receptacle Cable gland (Fig.1) UTS1JC1210P UTS1JC1210S Plug Without (Fig.2) UTS61210P UTS61210S Plug Cable gland (Fig.3) UTS6JC1210P UTS6JC1210S Jam nut receptacle Without (Fig.4) UTS71210P UTS71210S Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS012E10P UTS012E10S Plug Without (Fig.2) UTS612E10P UTS612E10S Cable gland (Fig.3) UTS6JC12E10P UTS6JC12E10S Jam nut receptacle Without (Fig.5) UTS712E10P UTS712E10S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS012D10P UTS012D10S Jam nut receptacle with stand off and with hold down clips Without (Fig.6) UTS712D10P32 UTS712D10S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.7) UTS712D10P UTS712D10S Layout Sealed unmated © 2011 – SOURIAU 105 UTS Series 1210 - 12E10/12D10 Dimensions Note: all dimensions are in mm Free hanging - UTS1 Plug - UTS6 74 Ø19.1 Fig. 1 Female Male Fig. 2 Fig. 3 33 66.7 Ø30.1 Ø30.1 25.3 Jam nut receptacle - UTS7 Front view 27.2 31.9 18 Ø19.1 3.5 3 12.3 Fig. 5 Fig. 6 Fig. 7 Fig. 4 4.2 18 Ø19.1 3.5 3 18 Ø19.1 3.5 3.1 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.7 Ø19.1 2.3 7.5 7.8 20.8 26.4 Ø3.2 Front view 75.3 81.7 UTS7 UTS0 Panel cut out Drilling pattern 20.8 20.8 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 3.3 1.6 Ø22 Ø30.5 Ø26.2 22° 30° 68° 10 Ø3.1 4.9 3 Square fl ange receptacle - UTS0 Front mounting Ø18.3 Rear mounting Ø22.3 Mechanics 10 contacts 6A/50V per IEC 61984 106 © 2011 – SOURIAU UTS Series 1210 - 12E10/12D10 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RM RM/RC 20W3K(1) S20RM RM/RC 18W3K(1) S20RM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 Jam nut sealing caps Part number UTS12DCG Part number UTS12DCGR Plug sealing cap Square fl ange sealing cap Part number UTS612DCG Part number UTS12DCGE Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket Color coding rings Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES (1): example of plating, for other plating see UTS catalog page 143 (2): contact reeled (3): loose contact Accessories and tooling Metal terminal © 2011 – SOURIAU 107 UTS Series 1210 - 12E10/12D10 Contacts IEC 6A 50V 1.5kV 3 Electrical characteristics UTS 1210 - 12E10/12D10 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² Current use Limited use Not recommended use UTS 1210 UL 5A 250V UL94 V-0 CSA 4A 250V UL94 V-0 UTS 12E10/12D10 UL 4.5A 250V UL94 HB CSA 4.5A 250V UL94 HB 0 20 40 60 80 100 0 2 4 6 8 10 12 Current (A) Ambient Operating Temperature (°C) 120 #20 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) - 1.58 22-20 RM20W3K(1) RC20W3K(1) - 1.58 20-18 RM18W3K(1) RC18W3K(1) - 2.1 stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 10 contacts 6A/50V per IEC 61984 108 © 2011 – SOURIAU OR OR OR OR WITH OR Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 111 Square fl ange receptacle Without (Fig.1) UTS01412P UTS01412S Free hanging receptacle Cable gland and grommet (Fig.2) UTS1GJC1412P Free hanging receptacle Nut and grommet (Fig.3) UTS1GN1412P Free hanging receptacle Cable gland (Fig.2) UTS1JC1412P UTS1JC1412S Plug Without (Fig.4) UTS61412P UTS61412S Plug Cable gland and grommet (Fig.5) UTS6GJC1412S Plug Nut and grommet (Fig.6) UTS6GN1412S Plug Cable gland (Fig.5) UTS6JC1412P UTS6JC1412S Jam nut receptacle Without (Fig.7) UTS71412P UTS71412S Jam nut receptacle Cable gland and grommet (Fig.9) UTS7GJC1412P Jam nut receptacle Nut and grommet (Fig.8) UTS7GN1412P PCB contacts supply separately see page 111 Square fl ange receptacle Without (Fig.1) UTS01412P UTS01412S Jam nut receptacle Without (Fig.7) UTS71412P UTS71412S Layout UTS Series 1412 © 2011 – SOURIAU 109 Dimensions Note: all dimensions are in mm UTS Series 1412 Plug - UTS6 Female Male Fig. 4 Fig. 5 Fig. 6 33 70 32 25.3 Ø31.5 Ø31.5 Ø31.5 Jam nut receptacle - UTS7 Mated connector length Fig. 7 Fig. 9 Fig. 8 18 18 49 70.7 Ø22.3 Ø22.3 3.5 3.5 1.6 75 82 UTS7 UTS0 Panel cut out Drilling pattern 23.2 23.2 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 2.2 0.7 3.8 5.8 5.1 2 1.4 1 2.2 4.5 5.9 1 0.3 2.9 5.5 Square fl ange receptacle - UTS0 Front mounting Ø21.5 Rear mounting Ø25.1 Square fl ange receptacle - UTS0 Free hanging - UTS1 78.5 43 Ø22.3 Fig. 3 11.3 Fig. 2 Ø22.3 23.2 28.8 2.3 10.5 21.9 Ø3.2 Fig. 1 Front view Female Male Mechanics 12 contacts 10A/63V per IEC 61984 110 © 2011 – SOURIAU UTS Series 1412 Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS14DCG Part number UTS14DCGR Plug sealing cap Square fl ange sealing cap Part number UTS614DCG Part number UTS14DCGE Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket Color coding rings Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 111 UTS Series 1412 Contacts UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 10A 63V 1.5kV 3 Electrical characteristics UTS 1412 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 120 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 12 contacts 10A/63V per IEC 61984 112 © 2011 – SOURIAU OR OR WITH OR UTS Series 14E12/14D12 (4x#16 + 8x#20) Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS014E12P UTS014E12S Plug Without (Fig.1) UTS614E12P UTS614E12S Cable gland (Fig.2) UTS6JC14E12P UTS6JC14E12S Jam nut receptacle Without (Fig.3) UTS714E12P UTS714E12S PCB contacts loaded Square fl ange receptacle Without (Fig.6) UTS014D12P UTS014D12S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS714D12P32 UTS714D12S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS714D12P UTS714D12S Layout Sealed unmated © 2011 – SOURIAU 113 UTS Series 14E12/14D12 (4x#16 + 8x#20) Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 30.4 35.1 18 Ø22.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø22.3 3.5 3 18 Ø22.3 3.5 3 Plug - UTS6 Fig. 1 Fig. 2 70 Ø35.1 Ø35.1 25.3 Square fl ange receptacle - UTS0 Mated connector length 11.3 Ø22.3 2.3 7.5 7.8 23.2 28.8 Ø3.2 Fig. 6 Front view 75 82 UTS7 UTS0 23.2 Panel cut out 23.2 23.2 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 Square fl ange receptacle - UTS0 Front mounting Ø21.5 Rear mounting Ø25.1 Drilling pattern 4.5 4.1 Ø22 Ø30.5 Ø26.2 Ø30.5 30° 68° 10 Ø3.1 1.6 4.5 2.3 6.7 22° 1 Mechanics 12 contacts 4A/50V per IEC 61984 114 © 2011 – SOURIAU UTS Series 14E12/14D12 (4x#16 + 8x#20) UTS 14E12/14D12 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS614DCG Part number UTS14DCGE Metal terminal Part number UTS14DCG Part number UTS14DCGR Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket UL 4.5A 250V UL94 HB CSA 4.5A 250V UL94 HB IEC 4A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 0 4 2 6 8 10 12 14 Current (A) Ambient Operating Temperature (°C) © 2011 – SOURIAU 115 UTS Series 14E12/14D12 (4x#16 + 8x#20) Mechanics 116 © 2011 – SOURIAU OR WITH OR UTS Series 12E14/12D14 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS012E14P UTS012E14S Plug Without (Fig.1) UTS612E14P UTS612E14S Cable gland (Fig.2) UTS6JC12E14P UTS6JC12E14S Jam nut receptacle Without (Fig.3) UTS712E14P UTS712E14S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS012D14P UTS012D14S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS712D14P32 UTS712D14S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS712D14P UTS712D14S Layout Sealed unmated © 2011 – SOURIAU 117 UTS Series 12E14/12D14 Dimensions Note: all dimensions are in mm 14 contacts 5A/32V per IEC 61984 Jam nut receptacle - UTS7 Front view 27.2 31.9 18 Ø19 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø19 3.5 3 18 Ø19 3.5 3.1 Plug - UTS6 Fig. 1 Fig. 2 66.7 Ø30.1 Ø30.1 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.7 Ø19 2.4 7.5 7.8 20.8 26.4 Ø3.2 Front view 75.3 81.7 UTS7 UTS0 Panel cut out Drilling pattern 20.8 20.8 Ø3.3 Jam nut receptacle - UTS7 21.4 22.7 4.4 Ø22 Ø30.5 Ø26.2 30° 68° 10 Ø3.1 2.7 2 4.7 3.8 1.8 1.4 Square fl ange receptacle - UTS0 22° Front mounting Ø18.3 Rear mounting Ø22.3 Mechanics 118 © 2011 – SOURIAU UTS Series 12E14/12D14 UTS 12E14/12D14 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS612DCG Part number UTS12DCGE Metal terminal Part number UTS12DCG Part number UTS12DCGR Part numbers Receptacle cap Plug cap 85005587A 85005596 Plastic protective cap Part numbers / neoprene UTFD13B Gasket UL 4.5A 250V UL94 HB CSA 4.5A 250V UL94 HB IEC 5A 32V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS712CCRR UTS612CCRR UTS712CCRY UTS612CCRY UTS712CCRG UTS612CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 0 4 2 6 8 10 Current (A) Ambient Operating Temperature (°C) © 2011 – SOURIAU 119 UTS Series 12E14/12D14 Mechanics 120 © 2011 – SOURIAU OR WITH OR UTS Series 14E15/14D15 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS014E15P UTS014E15S Plug Without (Fig.1) UTS614E15P UTS614E15S Cable gland (Fig.2) UTS6JC14E15P UTS6JC14E15S Jam nut receptacle Without (Fig.3) UTS714E15P UTS714E15S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS014D15P UTS014D15S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS714D15P32 UTS714D15S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS714D15P UTS714D15S Layout Sealed unmated © 2011 – SOURIAU 121 UTS Series 14E15/14D15 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 30.4 35.1 18 Ø22.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø22.3 3.5 3 18 Ø22.3 3.5 3 Plug - UTS6 Fig. 1 Fig. 2 70 Ø35.1 Ø35.1 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.3 Ø22.3 2.3 7.5 23.2 28.8 Ø3.2 Front view 7.8 75 82 UTS7 UTS0 Panel cut out Drilling pattern 23.2 23.2 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 30° 68° 22° 3.2 5.5 2.5 2.7 6.1 5.1 5.3 6.2 2.8 0.3 5.7 1.9 1 3.5 Square fl ange receptacle - UTS0 Front mounting Ø21.5 Rear mounting Ø25.1 Mechanics 15 contacts 4A/50V per IEC 61984 122 © 2011 – SOURIAU UTS Series 14E15/14D15 UTS 14E15/14D15 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS614DCG Part number UTS14DCGE Metal terminal Part number UTS14DCG Part number UTS14DCGR Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket UL 12A 650V UL94 HB CSA 12A 650V UL94 HB IEC 4A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 1.31mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 Current (A) Ambient Operating Temperature (°C) 0 5 3 8 10 20 18 15 13 23 25 28 30 © 2011 – SOURIAU 123 UTS Series 14E15/14D15 Mechanics 124 © 2011 – SOURIAU OR WITH OR UTS Series 14E18/14D18 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.6) UTS014E18P UTS014E18S Plug Without (Fig.1) UTS614E18P UTS614E18S Cable gland (Fig.2) UTS6JC14E18P UTS6JC14E18S Jam nut receptacle Without (Fig.3) UTS714E18P UTS714E18S PCB contacts loaded Square fl ange receptacle Without (Fig.7) UTS014D18P UTS014D18S Jam nut receptacle with stand off and with hold down clips Without (Fig.4) UTS714D18P32 UTS714D18S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.5) UTS714D18P UTS714D18S Layout Sealed unmated © 2011 – SOURIAU 125 UTS Series 14E18/14D18 Dimensions Note: all dimensions are in mm Jam nut receptacle - UTS7 Front view 30.4 35.1 18 Ø22.3 3.5 3 Fig. 3 Fig. 4 Fig. 5 4.2 18 Ø22.3 3.5 3 18 Ø22.3 3.5 3 Plug - UTS6 Fig. 1 Fig. 2 70 Ø35.1 Ø35.1 25.3 Square fl ange receptacle - UTS0 Mated connector length Fig. 6 Fig. 7 11.3 Ø22.3 2.3 7.5 23.2 28.8 Ø3.2 Front view 7.8 75 82 UTS7 UTS0 Panel cut out Drilling pattern Jam nut receptacle - UTS7 24.5 25.9 23.2 23.2 Ø3.3 1.6 3.3 6.1 Ø22 Ø26.2 Ø30.5 22° 30° 68° 10 Ø3.1 4.9 2.8 5.7 6.4 Square fl ange receptacle - UTS0 Front mounting Ø21.5 Rear mounting Ø25.1 Mechanics 18 contacts 5A/50V per IEC 61984 126 © 2011 – SOURIAU UTS Series 14E18/14D18 UTS 14E18/14D18 derating curves Jam nut sealing caps Plug sealing cap Square fl ange sealing cap Accessories Electrical characteristics Metal terminal Part number UTS614DCG Part number UTS14DCGE Metal terminal Part number UTS14DCG Part number UTS14DCGR Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket UL 4A 250V UL94 HB CSA 4A 250V UL94 HB IEC 5A 50V 1.5kV 3 Current use Limited use Not recommended use Test conditions Contact used: Machined contacts Wires used: 0.518mm² Color coding rings * Add G for Green, Y for Yellow, R for Red Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG G for Green Y for Yellow R for Red 0 20 40 60 80 100 120 Current (A) Ambient Operating Temperature (°C) 0 6 4 2 8 10 © 2011 – SOURIAU 127 UTS Series 14E18/14D18 Mechanics 128 © 2011 – SOURIAU OR OR WITH OR UTS Series 1419 - 14E19/14D19 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 131 Free hanging receptacle Cable gland (Fig.1) UTS1JC1419P UTS1JC1419S Plug Without (Fig.2) UTS61419P UTS61419S Plug Cable gland (Fig.3) UTS6JC1419P UTS6JC1419S Jam nut receptacle Without (Fig.4) UTS71419P UTS71419S PCB contacts supply separately see page 131 Jam nut receptacle Without (Fig.4) UTS71419P UTS71419S Handsolder electrical contacts loaded Square fl ange receptacle Without (Fig.8) UTS014E19P UTS014E19S Plug Without (Fig.2) UTS614E19P UTS614E19S Cable gland (Fig.3) UTS6JC14E19P UTS6JC14E19S Jam nut receptacle Without (Fig.5) UTS714E19P UTS714E19S PCB contacts loaded Square fl ange receptacle Without (Fig.9) UTS014D19P UTS014D19S Jam nut receptacle with stand off and with hold down clips Without (Fig.6) UTS714D19P32 UTS714D19S32 Jam nut receptacle with stand off and without hold down clip Without (Fig.7) UTS714D19P UTS714D19S Layout Sealed unmated Square fl ange receptacle © 2011 – SOURIAU 129 UTS Series 1419 - 14E19/14D19 Dimensions Note: all dimensions are in mm Square fl ange receptacle - UTS0 Mated connector length Fig. 8 Fig. 9 11.3 Ø22.3 2.3 7.5 78 23.2 28.8 Ø3.2 Front view 75 82 UTS7 UTS0 Free hanging - UTS1 Plug - UTS6 78.5 Ø22.3 Fig. 1 Female Male Fig. 2 Fig. 3 33 70 Ø35.1 Ø35.1 25.3 Jam nut receptacle - UTS7 Front view 30.4 35.1 18 3.5 3 12.3 Fig. 5 Fig. 6 Fig. 7 Fig. 4 4.2 18 Ø22.3 3.5 3 18 Ø22.3 Ø22.3 3.5 3 Panel cut out Drilling pattern Jam nut receptacle - UTS7 24.5 25.9 23.2 23.2 Ø3.3 1.6 4.9 Ø22 Ø26.2 Ø30.5 30° 68° 10 Ø3.1 3.3 6.6 2.8 5.7 Square fl ange receptacle - UTS0 22° Front mounting Ø21.5 Rear mounting Ø25.1 Mechanics 19 contacts 5A/32V per IEC 61984 130 © 2011 – SOURIAU UTS Series 1419 - 14E19/14D19 Metal terminal * Add G for Green, Y for Yellow, R for Red G for Green Y for Yellow R for Red Crimp tooling Contacts Contact size Part number of head RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RM RM/RC 20W3K(1) S20RM RM/RC 18W3K(1) S20RM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 Jam nut sealing caps Part number UTS14DCG Part number UTS14DCGR Plug sealing cap Square fl ange sealing cap Part number UTS614DCG Part number UTS14DCGE Part numbers Receptacle cap Plug cap 85005588A 85005597 Plastic protective cap Part numbers / neoprene UTFD14B Gasket Color coding rings Part numbers Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG Handle Tool kit Part number TOOLKIT Part number SHANDLES (1): example of plating, for other plating see UTS catalog page 143 (2): contact reeled (3): loose contact Accessories and tooling Metal terminal © 2011 – SOURIAU 131 UTS Series 1419 - 14E19/14D19 Contacts IEC 5A 32V 1.5kV 3 Electrical characteristics UTS 1419 - 14E19/14D19 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² Current use Limited use Not recommended use UTS 1419 UL 5A 250V UL94 V-0 CSA 4A 250V UL94 V-0 UTS 14E19/14D19 UL 4A 250V UL94 HB CSA 4A 250V UL94 HB 0 20 40 60 80 100 0 2 4 6 8 10 12 Current (A) Ambient Operating Temperature (°C) 120 #20 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) - 1.58 22-20 RM20W3K(1) RC20W3K(1) - 1.58 20-18 RM18W3K(1) RC18W3K(1) - 2.1 stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 19 contacts 5A/32V per IEC 61984 132 © 2011 – SOURIAU OR OR OR WITH UTS Series 1823 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contacts supply separately see page 135 Square fl ange receptacle Without (Fig.1) UTS01823P UTS01823S Free hanging receptacle Cable gland (Fig.2) UTS1JC1823P UTS1JC1823S Plug Without (Fig.3) UTS61823P UTS61823S Plug Cable gland (Fig.4) UTS6JC1823P UTS6JC1823S Jam nut receptacle Without (Fig.5) UTS71823P UTS71823S PCB contacts supply separately see page 135 Square fl ange receptacle Without (Fig.1) UTS01823P UTS01823S Jam nut receptacle Without (Fig.5) UTS71823P UTS71823S Layout © 2011 – SOURIAU 133 UTS Series 1823 Dimensions Note: all dimensions are in mm Plug - UTS6 Female Male Fig. 3 Fig. 4 33 81.3 25.3 Ø42 Ø42 Square fl ange receptacle - UTS0 Free hanging - UTS1 89 Ø28.6 Fig. 2 11.3 Ø28.6 27.1 33.5 2.5 10.3 18.9 Ø3.2 Fig. 1 Front view Female Male Jam nut receptacle - UTS7 Mated connector length Front view 41.5 36.9 Fig. 5 18 12.3 Ø28.6 3.5 84.1 90.8 UTS7 UTS0 Panel cut out 27.1 27.1 Ø3.3 Jam nut receptacle - UTS7 24.5 25.9 Drilling pattern 3.5 5 8.3 3.7 6.7 3.4 4.8 1.9 8.6 7.7 5.4 Square fl ange receptacle - UTS0 Front mounting Ø27.9 Rear mounting Ø31.9 Mechanics 23 contacts 9A/63V per IEC 61984 134 © 2011 – SOURIAU UTS Series 1823 Accessories and tooling (1): example of plating, for other plating see UTS catalog page 143 Metal terminal Crimp tooling Contacts Contact size Part number of head RM/RC 28M1K(1) Standard contacts #16 Ø 1.6mm S16RCM20 RM/RC 24M9K(1) S16RCM20 RM/RC 20M13K(1) S16RCM20 RM/RC 20M12K(1) S16RCM20 RM/RC 16M23K(1) S16RCM16 RM/RC 14M50K(1) S16RCM1450 RM/RC 14M30K(1) S16RCM14 SM/SC 24ML1TK6(1) S16SCM20 SM/SC 20ML1TK6(1) S16SCM20 SM/SC 16ML1TK6(1) S16SCML1 SM/SC 14ML1TK6(1) S16SCML1 SM/SC 16ML11TK6(1) S16SCML11 RMDXK10D28K Coaxial contacts M10S-1J RCDXK1D28K M10S-1J RM/RC DX60xxD28K M10S-1J RM/RC DXK10D28 + york090 M10S-1J RM/RC DX60xxD28 M10S-1J Jam nut sealing caps Part number UTS18DCG Part number UTS18DCGR Plug sealing cap Square fl ange sealing cap Part number UTS618DCG Part number UTS18DCGE Part numbers Receptacle cap Plug cap 8500-5590A 8500-5599 Plastic protective cap Part numbers / neoprene UTFD16B Gasket Handle Tool kit Part number TOOLKIT Part number SHANDLES Metal terminal © 2011 – SOURIAU 135 UTS Series 1823 Contacts 120 UL 10A 500V UL94 V-0 CSA 7A 500V UL94 V-0 IEC 9A 63V 1.5kV 3 Electrical characteristics UTS 1823 derating curves Test conditions Contact used: Machined contacts Wires used: 1.31mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 3 5 8 10 13 15 18 20 23 25 28 30 Current (A) Ambient Operating Temperature (°C) 120 #16 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.1 26-24 RM24M9K(1) RC24M9K(1) 0.8 1.6 22-20 RM20M13K(1) RC20M13K(1) 1.18 1.8 22-20 RM20M12K(1) RC20M12K(1) 1.18 2.2 20-16 RM16M23K(1) RC16M23K(1) 1.8 3.2 16-14 RM14M50K(1) RC14M50K(1) 2.05 3.2 16-14 RM14M30K(1) RC14M30K(1) 2.28 3.2 Stamped & formed reeled contacts 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) 0.89-1.28 - 22-20 SM20M1TK6(1)(2) SC20M1TK6(1)(2) 1.17-2.08 - 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) 3.0 - 18-16 SM16M11TK6(1)(2) SC16M11TK6(1)(2) 2.0-3.0 - 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) 3.2 - PCB Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - Coaxial Cable Multipiece - RMDXK10D28 RCDXK1D28 - - Cable Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Twisted pair Multipiece - RMDXK10D28 + york090 RCDXK1D28 + york090 - - Twisted pair Monocrimp - RMDX60xxD28 RCDX60xxD28 - - Fiber optic POF contacts Plastic optical fi bre - RMPOF1000 RCPOF1000B - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 23 contacts 9A/63V per IEC 61984 136 © 2011 – SOURIAU OR WITH OR UTS Series 1832 Specifi cations Contact type Connector type Backshell Part number Male insert Female insert Crimp contact supply separately see page 139 Free hanging receptacle Cable gland (Fig.1) UTS1JC1832P UTS1JC1832S Plug Without (Fig.2) UTS61832P UTS61832S Plug Cable gland (Fig.3) UTS6JC1832P UTS6JC1832S Jam nut receptacle Without (Fig.4) UTS71832P UTS71832S PCB contacts supply separately see page 139 Jam nut receptacle Without (Fig.4) UTS71832P UTS71832S Layout © 2011 – SOURIAU 137 UTS Series 1832 Dimensions Note: all dimensions are in mm Plug - UTS6 Female Male Fig. 2 Fig. 3 33 81.3 25.3 Ø42 Ø42 Free hanging - UTS1 89 Ø28.6 Fig. 1 Jam nut receptacle - UTS7 Mated connector length - UTS7 90.8 Front view 41.5 36.9 18 12.3 Ø28.6 3.5 Fig. 4 Panel cut out Drilling pattern Jam nut receptacle - UTS7 24.5 25.9 1.6 4.4 5.7 8.1 2.4 3.1 5.3 3.3 6.1 9.7 4.8 7.2 8.7 0.8 2.4 3.8 5.6 9.1 4.9 5.8 2.4 5.5 7.7 8.9 4 6.7 8.5 Mechanics 32 contacts 4A/32V per IEC 61984 138 © 2011 – SOURIAU UTS Series 1832 Metal terminal Crimp tooling Contacts Contact size Part number of head RM/RC 24W3K(1) Standard contacts #20 Ø 1mm S20RM RM/RC 20W3K(1) S20RM RM/RC 18W3K(1) S20RM SM/SC 24W3S(2) S20SCM20 SM/SC 24WL3S(3) S20SCM20 SM/SC 20W3S(2) S20SCM20 SM/SC 20WL3S(3) S20SCM20 Jam nut sealing caps Part number UTS18DCG Part number UTS18DCGR Plug sealing cap Square fl ange sealing cap Part number UTS618DCG Part number UTS18DCGE Part numbers Receptacle cap Plug cap 8500-5590A 8500-5599 Plastic protective cap Part numbers / neoprene UTFD16B Gasket Handle Tool kit Part number TOOLKIT Part number SHANDLES (1): example of plating, for other plating see UTS catalog page 143 (2): contact reeled (3): loose contact Accessories and tooling Metal terminal © 2011 – SOURIAU 139 UTS Series 1832 Contacts UL 5A 250V UL94 V-0 CSA 4A 250V UL94 V-0 IEC 4A 32V 1.5kV 3 Electrical characteristics UTS 1832 derating curves Test conditions Contact used: Machined contacts Wires used: 0.518mm² Current use Limited use Not recommended use 0 20 40 60 80 100 0 2 4 6 8 10 Current (A) Ambient Operating Temperature (°C) 120 #20 Contact type AWG Part number Max wire Ø Max Male Female insulator Ø Crimp Machined 26-24 RM24W3K(1) RC24W3K(1) - 1.58 22-20 RM20W3K(1) RC20W3K(1) - 1.58 20-18 RM18W3K(1) RC18W3K(1) - 2.1 stamped & formed reeled contacts 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.89-1.58 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 22-20 SM20W3TK6(2) SC20W3TK6(2) - 1.17-2.08 PCB Machined (3) - RMW5016K RCW5016K - - (1): Example of plating, for other plating see page 143 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 (3): For dimensions see page 148 Mechanics 32 contacts 4A/32V per IEC 61984 UTS Series © 2011 – SOURIAU 141 Contacts UTS Series Description ....................................................................................................................................... 142 Contact plating selector guide ................................................................................................... 143 Contact selector guide ................................................................................................................. 144 Packaging ......................................................................................................................................... 144 Crimp contacts ................................................................................................................................ 145 #16 coaxial contacts .................................................................................................................... 147 PCB contacts ................................................................................................................................... 148 Fibre optic contacts ....................................................................................................................... 149 142 © 2011 – SOURIAU UTS Series Contacts Contacts Description The UTS series is delivered with (solder and PCB versions) or without contact (crimp version). When contacts are not loaded, this series offers the unique possibility to use the same contact in any layout as long as it receives the same active part size. Thus it is possible to buy only one contact reference and equip all connectors even if housings are different. The main benefit is the standardisation which means reduction of inventory cost. Bearing in mind that any additional tool or complicated assembly process should be avoided, our contacts are based on a snap-in principle which avoid the use of an insertion tool. Crimp contacts are available in different versions: In addition, UTS series can obviously be equipped with solder contacts, PCB contacts, screw termination. • machined • stamped & formed • coaxial • fiber optic © 2011 – SOURIAU 143 UTS Series Contacts Contact plating selector guide As soon as you know what contact size you need, you next have to decide on which type to use. Souriau proposes mainly two different types of electrical contacts: - Machined - Stamped & formed Machined contacts are generally chosen for low quantities purpose as well as a better solution for power applications. Stamped & formed contacts offer the ability to be crimped automatically which makes them more suitable for high volume production applications. Then comes the question: What plating should I choose ? Hereunder is a graph with criteria to guide you: NB: do not mix different plating (e.g. tin plated pin contact with gold plated socket contact). 250 100 0.4μm of gold min Gold fl ash Silver Tin 5mA 5mV Contact size #20 #12 #16 #8 Vibration Number of cycles Current / Voltage Contacts 144 © 2011 – SOURIAU UTS Series Contacts Electrical characteristics: contact resistance #20 Ø1mm Machined < 6m Stamped & formed < 15m #16 Ø1.6mm Machined < 3m Stamped & formed < 6m #12 Ø2.4mm Machined < 5m #8 Ø3.6mm Machined < 5m Available platings (contact supply separately) A 2μ Ni + 2μ Ag J Gold fl ash over 2μ Ni K Min 0.4μ gold over 2μ Ni S31 Active part: Gold fl ash over Ni Crimp area: Nickel S18 Active part: 0.75μ gold min over 2μ Ni Crimp area: 1.3μ tin over Ni Other: Nickel S25 S26 Active part: 0.75μ Au over Ni Crimp area: fl ash Au over Ni TK6 2-5μ Sn pre-plated Conscious of the wide variety of applications, contact packaging has been considered for small series (bulk packaging) and high volume production (reeled contacts): Size contacts #20 & #16 • 100 pieces bulk packing (stamped & formed contacts) Electrical characteristics: contact resistance #20 Ø1mm Machined < 4m #16 Ø1.6mm Machined < 3m Available platings (contact preloaded) Min 0.4μ gold over 2μ Ni Contact preloaded Contact supply separately • 50 pieces bulk packing (machined contacts) • 25 pieces bulk packing (stamped & formed contacts) • 1000 pieces bulk packing (machined contacts) • 5000 pieces reeled (machined contacts) • 3000 pieces reeled (stamped & formed contacts) Size contacts #12 & #8 Contact selector guide Packaging © 2011 – SOURIAU 145 UTS Series Contacts Crimp contacts (1) contact reeled (2) loose contact Exemple: RM24W3K - Size #20, Machined, AWG24 wire. Contact size Type Wire size Part number Max wire Ø Max insulator Ø Plating AWG mm² Male Female available #20 Ø1 mm Machined 26-24 0.13-0.20 RM24W3K RC24W3K 1.58 max K Stamped & Formed 26-24 0.13-0.25 SM24W3-(1) SC24W3-(1) 0.89-1.58 TK6 S25 (female) SM24WL3-(2) SC24WL3-(2) S26 (male) Machined 22-20 0.32-0.52 RM20W3K RC20W3K 1.58 max K Stamped & Formed 22-20 0.35-0.5 SM20W3-(1) SC20W3-(1) 1.17-2.08 TK6 S25 (female) SM20WL3-(2) SC20WL3-(2) S26 (male) Machined 20-18 0.50-0.93 RM18W3K RC18W3K 2.10 max K #16 Ø1.6 mm Machined 30-28 0.05-0.08 RM28M1- RC28M1- 0.55 1.1 K, J Machined 26-24 0.13-0.2 RM24M9- RC24M9- 0.8 1.6 K, J Stamped & Formed 26-24 0.13-0.25 SM24M1-(1) SM24ML1-(2) SC24M1-(1) SC24ML1-(2) 0.89-1.28 Insulation grip S31, S18, TK6 Machined 22-20 0.32-0.52 RM20M13- RC20M13- 1.18 1.8 K, J RM20M12- RC20M12- 2.2 Stamped & Formed 22-20 0.35-0.5 SM20M1-(1) SM20ML1-(2) SC20M1-(1) SC20ML1-(2) 1.17-2.08 Insulation grip S31, S18, TK6 Machined 20-16 0.52-1.5 RM16M23- RC16M23- 1.8 3.2 K, J Stamped & Formed 18-16 0.8-1.5 SM16M1-(1) SM16ML1-(2) SC16M1-(1) SC16ML1-(2) 3.0 No insulation grip S31, S18, TK6 Stamped & Formed 18-16 0.8-1.5 SM16M11-(1) SM16ML11-(2) SC16M11-(1) SC16ML11-(2) 2.0-3.0 Insulation grip S31, S18, TK6 Machined 16-14 1.5-2.5 RM14M50- RC14M50- 2.05 3.2 K, J Machined 16-14 1.5-2.5 RM14M30- RC14M30- 2.28 3.2 K, J Stamped & Formed 14 2.0-2.5 SM14M1-(1) SM14ML1-(2) SC14M1-(1) SC14ML1-(2) 3.2 No insulation grip S31, S18, TK6 #12 Ø2.4 mm Machined 22 0.13-0.4 82911457NA 82911456A - 4.9 A, K 20 0.5 82911459NA 82911458A 18 0.75-1.0 82911461NA 82911460A 16 1.5 82911463NA 82911462A 14 2.5 82911465NA 82911464A 12 4 82911467NA 82911466A #8 Ø3.6 mm Machined 16 1.5 82913601A 82913600A - 6.5 A 14 2.5 82913603A 82913602A 12 4 82913605A 82913604A 10 6.0 82913607A 82913606A 8 10.0 82913609A 82913608A Standard version Contacts 146 © 2011 – SOURIAU Contact 1 Contact 2 Standard male contact Standard female contact Longer male contact Standard male contact Standard female contact FMLB Shorter female contact LMFB UTS Series Contacts Crimp contacts Exemple: RM16M3GE1K - Size #16, Machined, Longer male, AWG16 wire. First Mate Last Break contacts should be chosen only if the cavity is not marked with the earth symbol. For cavities marked with the earth symbol, standard contacts will fulfi ll the same role as a fi rst mate, last break contact used in a standard cavity. Ground symbol How to make FMLB / LMFB connection First Mate Last Break contacts Contact size Type Wire size Part number Max wire Ø Max insulator Ø Color band Plating available AWG mm² Male Female Front Rear #16 Ø1.6 mm Longer male contact (+1mm) Machined 30-28 0.05-0.08 RM28M1GE1□ - 0.55 1.1 - Red □ = K, J 26-24 0.13-0.2 RM24M9GE1□ 0.8 1.6 Red Red 22-20 0.32-0.52 RM20M13GE1□ 1.18 1.8 Black Red RM20M12GE1□ 2.2 Blue Red 20-16 0.52-1.5 RM16M23GE1□ 1.8 3.2 - Red 16-14 1.5-2.5 RM14M50GE1□ 2.05 - - Red 16-14 1.5-2.5 RM14M30GE1□ 2.28 - - Red #16 Ø1.6 mm Shorter female contact (-0.7mm) Machined 30-28 0.05-0.08 - RC28M1GE7□ 0.55 1.1 - Blue □ = K, J 26-24 0.13-0.2 RC24M9GE7□ 0.8 1.6 Red Blue 22-20 0.32-0.52 RC20M13GE7□ 1.18 1.8 Black Blue RC20M12GE7□ 2.2 Blue Blue 20-16 0.52-1.5 RC16M23GE7□ 1.8 3.2 - Blue 16-14 1.5-2.5 RC14M50GE7□ 2.05 - - Blue 16-14 1.5-2.5 RC14M30GE7□ 2.28 - - Blue ont Re © 2011 – SOURIAU 147 UTS Series Contacts #16 coaxial contacts We provide 2 types of coaxial contacts suitable for 50 or 75, coaxial cable or twisted pair cable. Monocrimp coaxial contact • The monocrimp one-piece coaxial contacts offer high reliability plus the economic advantage of a 95% reduction in installation time over conventional assembly methods. • This economy is achieved by simultaneously crimping both the inner conductor and outer braid or drain wire. Multipiece crimp coaxial contact • The inner conductor and outer braid is crimped individually. • The thermoplastic insulating bushing in the outer body is designed to accept and permanently retain the inner contact. • An outer ferrule is used to connect the braid to the outer contact and provide cable support to ensure against bending and vibration. Suitable for Coaxial cable or Twisted cable • For jacket diameter from 1.78 to 3.05mm Inner conductor up to 2.44mm diameter • For jacket diameter from 0.64 to 1.45mm Inner conductor from AWG30 to AWG24 Contacts for coaxial cable summary Contact type Contact range Contact part number with cable combination Cabling notice Male contact Female contact Multipiece RMDXK10D28 RCDXK1D28 See page 176 See pages 180 & 181 Monocrimp RMDX60xxD28 RCDX60xxD28 See page 182 Contacts for twisted pairs cable summary Contact type Contact range Contact part number with cable combination Cabling notice Male contact Female contact Multipiece RMDXK10D28 + YORK090 RCDXK1D28 + YORK090 See page 177 See page 178 Monocrimp RMDX60xxD28 RCDX60xxD28 See page 179 Coaxial contact range Contacts 148 © 2011 – SOURIAU PCB contacts PCB contacts PCB soldering UTS range can be carried out with a wave soldering process, but not refl ow soldering process. All high temperature processes are prohibited. Nominal length (G) Dimension of dipsolder contacts out of connector (contacts to be ordered separately). Contact size Type Part number Plating Male Female #20 Ø1mm Short version RMW50A7K RCW50A7K K Long version RMW5016K RCW5016K #16 Ø1.6mm Short version RM20M12E8K RC20M12E8K K Long version RM20M12E83K RC20M12E83K RC20M12E84K Exemple: RM50A7K - Size #20, Short version, male. UTS Series Contacts G * Plating indication: see plating table Connector size Pin contact Socket contact RM20M12E8*□ RM20M12E83*□ RC20M12E8*□ RC20M12E83*□ RC20M12E84*□ 10 4 9.1 3.3 8.5 12.1 12 4 9.1 3.3 8.5 12.1 14 4 9.1 3.3 8.5 12.1 16 4 9.1 3.3 8.5 12.1 Connector size Pin contact Socket contact RM20M 12E8*□ RM20M 12E83*□ RMW 50A7K RMW 5016K RC20M 12E8*□ RC20M 12E83*□ RCW 50A7K RCW 5016K 10 4.1 9.2 9.51 10.41 4.65 8.5 2.4 3.04 12 4 9.2 9.51 10.41 3.3 8.5 2.4 3.04 14 4 9.2 9.51 10.41 3.3 8.5 2.4 3.04 16 4 9.2 9.51 10.41 3.3 8.5 2.4 3.04 UTS0 UTS7 © 2011 – SOURIAU 149 Fibre optic contacts Size 16 Fibre optic contacts for TRIM TRIO® connectors Size 16 Fibre optic contacts are optical contacts designed for the integration of optical links in all TRIM TRIO® cable connectors. The Fibre optic contacts are designed to accommodate: • Plastic Optical Fibre (POF) 1 mm core and 2.2 mm jacket • Plastic Clad Fibre (PCF) 230μm core and 2.2 mm jacket Typical features and benefits are: • Socket contact is spring loaded to avoid any air gap between the two optical faces. • Low insertion loss is provided by high precision pieces. • Single jumpers, multiway harness and active device housings can be supplied regarding customer requirement. Performance • Fibre type: ................................................................................................................................POF • Wave length: ........................................................................................................................650 nm • Optical insertion loss (typ.): ..........................................................................................2 dB max. • Jacketed external diameter: ............................................................................................2.2mm • Temperature range: ....................................................................................................-25°C to +70°C • Cable retention: ..................................................................................................................... 49N • Mating cycles without cleaning: .........................................................................................50 • Max. mating cycles: ...............................................................................................................500 Construction • Contact body: Copper alloy Connector accommodation Any TRIM TRIO® size 16 contact can be used in any contact position in any connector in the TRIM TRIO® size 16 interconnection system : UTP, UTS, UTG, UTO. UTS Series Contacts Description Technical characteristics Contacts 150 © 2011 – SOURIAU Fibre optic contacts UTS Series Contacts POF Contact (Plastic Optical Fibre) Ordering information Part numbers Descriptions 80WD0005 Stripping tool 80WD0025 Automatic stripping tool for Ø 0.5 mm, 0.6 mm, 0.7 mm & 3.8 mm 80WM0006 Ruler 80WP0005 Polishing plate 80WP0013 Non slip base (to hold the polishing plate) 80WP0014 Polishing disk (grain size 9μm) 80WP0018 Polishing tool 80WP0019 Polishing disk (grain size 30μm) 80WS0002 Crimping plier STANDARD TOOLING KIT - P/N 80MS0004 The standard tooling kit is made of the part numbers below that can be ordered separately as well. Part numbers Descriptions 80WG0010 Needle 80WG0015 Capsule 80WG0016 Syringe 80WN0005 Dry air spray 80WN0006 Optical paper 80WN0012 Dropping bottle 80WN0008 Wiping solvent SPECIFIC TOOLING LIST - can be ordered only separately POF Contacts (Plastic Optical Fibre) Male contact ................................................RMPOF1000 Female contact ......................................... RCPOF1000B © 2011 – SOURIAU 151 UTS Series Contacts Contacts UTS Series © 2011 – SOURIAU 153 Technical information UTS Series Tooling ............................................................................................................................................... 154 Assembly intruction ....................................................................................................................... 156 Dimensions overmoulded harnesses ...................................................................................... 162 Extraction tools ............................................................................................................................... 162 Rated current & working voltage ............................................................................................... 163 UV resistance .................................................................................................................................. 164 UL94 + UL1977 ............................................................................................................................. 165 IEC 61984 & IP codes explained ............................................................................................. 168 What is NEMA rating ? ................................................................................................................. 170 Ethernet for the layman ................................................................................................................ 171 154 © 2011 – SOURIAU UTS Series Technical information Souriau has been working in partnership with Mecal for a good number of years. With sales offi ces located in all major industrial regions of the world, the combined strengths of both organisations has resulted in a truly global solution to all your production tooling needs. Mecal sales network: Mecal is leader in manufacturing tooling for crimping terminals over a stripped wire. Established in 1976, Mecal has become one of the world's leading companies dedicated to the design and manufacture of semi automatic production tools for strip fed, open barrel crimp terminals, serving the Automotive, Telecom and Datacomm industry. The extreme environment interconnect specialist “from deep sea to deep space”. Souriau designs manufactures and markets high performance interconnect solutions for severe environments dedicated to the aerospace, defence, light and heavy industry markets. Mini Applicator Stripper Presses Tooling www.mecal.net/eng/retevendita.php Automatic crimping tools © 2011 – SOURIAU 155 UTS Series Technical information Contact size Part number Head Handles #20 1mm RM/RC 24W3 - S20RCM SHANDLES RM/RC 20W3 - RM/RC 18W3 - SM 24W3S-(1) SC 24W3S-(1) S20SCM20 SM 24WL3S-(2) SC 24WL3S-(2) SM/SC 20W3S-(1) SM/SC 20WL3S-(2) #16 1.6mm RM/RC 28M1- S16RCM20 RM/RC 24M9- RM/RC 20M13- RM/RC 20M12- RM/RC 16M23- S16RCM16 RM/RC 14M50- S16RCM1450 RM/RC 14M30- S16RCM14 SM/SC 24M1- SM/SC 24ML1- S16SCM20 SM/SC 20M1- SM/SC 20ML1- SM/SC 16M1- SM/SC 16ML1- S16SCML1 SM/SC 14M1- SM/SC 14ML1- SM/SC 16M11- SM/SC 16ML11- S16SCML11 Specifi c contacts Contact size Part number Tool with separate locator Extraction tools Hand tool Positioner + locator setting #12 2.4mm 8291 1457N- / 8291 1456- M317 VGE10077A 1-2 5106020924 8291 1459N- / 8291 1458- 2 8291 1461N- / 8291 1460- 2 8291 1463N- / 8291 1462- 3 8291 1465N- / 8291 1464- 3 8291 1467N- / 8291 1466- 4 #8 3.6mm 8291 3601A / 8291 3600A M317 VGE10078A 3 51060210936 8291 3603A / 8291 3602A 3 8291 3605A / 8291 3604A 4 8291 3607A / 8291 3606A 5 8291 3609A / 8291 3608A 6/7 Contact size Part number Hand tools (SHANDLES) head Tool with separate locator Extraction tools Hand tool Positioner + locator setting #16 Ø 1.6mm Longer RM contact RM28M1GE1- S16RCM20 RX2025GE1 RM24M9GE1- RM20M13GE1- RM16M23 GE1- S16RCM16 MH860 MH86186 6/8 RM14M50 GE1- S16RCM1450 M317 UH25 3 RM14M30 GE1- S16RCM14 #16 Ø 1.6mm Shorter RC contact RC28M1GE7- S16RCM20 MH860 MH86164G 4/6 RC24M9GE7- 5/6 RC20M13GE7- RC20M12GE7- 5/7 RC16M23GE7- S16RCM16 6/8 RC14M50GE7- S16RCM1450 M317 UH25 3 RC14M30GE7- S16RCM14 Standard contacts Coaxial contacts See cabling notice chapter Appendices, pages 178 to 182. (1) contact reeled (2) loose contact Note: endurance of SHANDLES tool = 5 000 cycles. 51060210924 51060210936 SHANDLES Crimptooling table Technical information 156 © 2011 – SOURIAU Assembly instruction Part number Stripping length L Male Female (mm) Machined contact #16 RM28M1- / RM24M9- RM20M13- / RM20M12- RC28M1- / RC24M9- RC20M13- / RC20M12- 4.8 RM16M23- / RM14M50- RM14M30- RC16M23- / RC14M50- RC14M30- 7.1 #20 RM24W3- / RM20W3- RM18W3- RC24W3- / RC20W3- RC18W3- 4.8 Stamped & formed #16 SM24M1- / SM24ML1- SM20M1- / SM20ML1 SC24M1- / SC24ML1- SC20M1- / SC20ML1- 4 SM16M11- / SM16ML11- SC16M11- / SC16ML11- 4.65 SM16M1- / SM16ML1- SC16M1- / SC16ML1- 6.35 SM14M1- / SM14ML1- SC16M11- / SC16ML11- 6.35 Screw contacts Power contacts #12 8291 1457- / 8291 1459- / 8291 1461- / 8291 1463- / 8291 1465- / 8291 1467- 8291 1456- / 8291 1458- / 8291 1460- /8291 1462- / 8291 1464- / 8291 1466 - 7 to 8 Power contacts #8 8291 3601- / 8291 3603- / 8291 3605- 8291 3607- / 8291 3609- 8291 3600- / 8291 3602- / 8291 3604- / 8291 3606- / 8291 3608- 6.5 to 7.5 Contact delivered with connector 5.8 Part number Stripping length L Male Female (mm) Machined contact #16 & #20 5 L L L L Without insulation support With insulation support L UTS Series Technical information Wire stripping crimp version Wire stripping solder version © 2011 – SOURIAU 157 One of the key factors which affects the performance of a connector, is the way contacts are terminated. Crimped connections are nowadays seen as the best solution to ensure quality throughout the lifetime of the product. Here are some reasons why we recommend this method of termination for UTS connectors: Advantages (Extract from the IEC 60352-2): - Effi cient processing of connections at each production level - Processing by fully-automatic or semi- automatic crimping machines, or with hand operated tools - No cold-soldered joints - No degradation of the spring characteristic of female contacts by the soldering temperature - No health risk from heavy metal and fl ux steam - Preservation of conductor fl exibility behind the crimped connection - No burnt, discolored and overheated wire insulation - Good connections with reproducible electrical and mechanical performances - Easy production control. To ensure that the crimp tooling is performing according tooriginal specifi cations, it is important to carry out regular checks. A common way to check the performance of tooling is with a simple pull test, ideally using a dedicated electric pull tester. Minimum recommended full forces are indicated in the tables below: Active contact part Contact type Die location on heads Wire section range Section (mm²) Tensile straight test (mini) Height (Mm) H (±0.075) Width (Mm) W (±0.075) Head's P/N Machined contacts size 20 RM/RC 24W3* 26/24 AWG 26 0.12 min 15 N 0.95 1.27 S20RCM AWG 24 0.25 max 32 N RM/RC 20W3* 22/20 AWG 22 0.32 min 40 N 1.26 1.78 AWG 20 0.50 max 60 N RM/RC 18W3* 20/18 AWG 20 0.50 max 60 N 1.35 1.86 AWG 18 0.82 max 90 N S & F contacts size 20 SM/SC 24WL3TK6* 26/24 AWG 26 0.12 min 15 N 0.80 1.49 S20SCM20 AWG 24 0.25 max 32 N SM/SC 20WL3TK6* 22/20 AWG 22 0.32 min 40 N 1.01 1.53 AWG 20 0.50 max 60 N Machined contacts size 16 RM/RC 28M1K* 30/28 AWG 30 0.05 min 11 N 1.14 1.41 S16RCM20 AWG 28 0.08 max 11 N RM/RC 24M9K* 26/24 AWG 26 0.12 min 15 N 1.15 1.41 AWG 24 0.25 max 32 N RM/RC 20M13K* 22/20 AWG 22 0.32 min 40 N 1.26 1.76 AWG 20 0.50 max 60 N RM/RC 20M12K* AWG 22 0.32 min 40 N AWG 20 0.50 max 60 N RM/RC 16M23K* 20 AWG 20 0.50 max 60 N 1.66 2.18 18 AWG 18 0.82 max 90 N 1.80 2.28 S16RCM16 16 AWG 16 1.50 max 150 N 1.96 2.43 RM/RC 14M30K* 16 AWG 16 1.50 min 150 N 2.10 2.68 S16RCM14 14 AWG 14 2.50 min 230 N 2.30 2.78 RM/RC 14M50K* 16 AWG 16 1.50 min 150 N 2.09 2.59 S16RCM1450 14 AWG 14 2.50 max 230 N 2.26 2.71 S & F contacts size 16 SM/SC 24ML1TK6* 26/24 AWG 26 0.12 min 15 N 0.84 1.50 S16SCM20 AWG 24 0.25 max 32 N SM/SC 20ML1TK6* 22/20 AWG 22 0.32 min 40 N 1.02 1.54 AWG 20 0.50 max 60 N SM/SC 16ML11TK6* 18 AWG 18 0.82 min 90 N 1.32 2.09 S16SCML11 16 AWG 16 1.50 max 150 N 1.36 2.10 SM/SC 16ML1TK6* 18 AWG 18 0.82 min 90 N 1.49 2.02 16 AWG 16 1.50 max 150 N 1.7 2.05 S16SCML1 SM/SC14ML1TK6* 14 AWG 14 2.50 max 230 N 1.79 2.58 (1): example of plating, for other plating see page 143 W W H H Machined contact Stamped & Formed contact UTS Series Technical information Crimping Technical information 158 © 2011 – SOURIAU • Strip wires, crimp or solder contacts • Insert contacts into connector cavities (insert manually or use tool RTM205 crimp contacts only) • Place receptacle in the panel cut-out, with optional gasket • Secure receptacle with screws (not supplied) Gasket (optional) Gasket (optional) Front mounting : Crimp version Rear mounting : Crimp version Optional coding ring Optional coding ring Panel thickness: 2.5mm max Panel Receptacl
